It is known that most owners personal computers uses operating windows system. It is not surprising that most of the threats from the Internet are directed against it: these are millions of viruses, and a variety of spyware, and, of course, not dormant hackers. All this can seriously damage the system, after which it may require urgent reinstallation. In addition, any operating system tends to wear out: it is recommended to reinstall it regularly every 2 years.
However, many people care not so much about replacing the OS as the problem of how to recover data after re windows installation in full. Of course, the best option is to take care in advance and save the valuable files on a separate medium. But often the demolition of the system occurs involuntarily. Therefore, with the problem of recovering lost electronic information faced by many.
The good news is that recovering data after reinstalling the system is quite possible. Moreover, this process can be carried out in almost any circumstances. The fact is that after Windows receives a signal for deletion, it just hides the files, putting information about them in the main file table. That is, in fact, the data remains in its place, only another can be written on top of it, new informationafter which they will be permanently deleted. Turning to this table, restoring all the information is not difficult. However, there are times when the file table may be damaged. In such a situation, a complete analysis of the C drive is required, and each lost file is searched based on its internal structure. This process can take a long time.
That the information on a disk should not be rewritten, special attention should be paid, otherwise restoration will be impossible. To do this, immediately after the detection of data loss, you must immediately stop any actions with hard drive. It is advisable to even turn off the computer without resorting to standard methods - just unplug the power cord. After that, you need to proceed directly to recover lost data.
Contrary to popular belief, formatting a hard disk does not play a significant role in the ability to recover files - regardless of whether it was carried out in full or fast mode. The degree of fragmentation is much more important. If the disk has been thoroughly defragmented, then recovering lost data is possible only manually. Numerous programs and utilities in this case will not only be ineffective, but they can also hurt.
It is worth noting that the restoration of important files is also possible through the system restore point, the creation of which allows you to fix the state of the OS at the moment and quickly restore Windows in the event of an unexpected failure in its operation in the future.
You should always remember that recovering data from a hard disk is a rather complicated procedure, which includes many nuances. Attempts to carry out it yourself in the absence of experience and the necessary knowledge can turn into erroneous actions, which will only lead to an aggravation of the situation and even the inability to return lost files. In this regard, it is most advisable to turn to the services of a qualified specialist who will perform all the necessary operations efficiently and competently.
December 12, 2010 Views: 45389It happens that by accident deleted files, and then I suddenly realized that I deleted the wrong files, also subsequently the actions of viruses can be deleted needed files (documents, pictures, music videos or letters), often this happens to inexperienced users after reinstalling windows. In general, there can be many reasons. What to do, where to run, what to grab? I will tell you how to recover lost files.
File recovery.
And so the first thing we do is of course check the basket. If there are no necessary files there, then the files have been deleted and you can only be helped file recovery programs. If you lost the necessary files when reinstalling Windows, try not to format hDD. Data Recovery after Disk Formatting a very time-consuming task and in most cases at home is not possible.
There are many programs, but good ones. recovery programs need to search. I tried many, good results are mainly given only by paid programs. The best of them, in my personal opinion, is R-Studio. You can read the instructions for R-Studio.
But if you feel sorry for the money or there simply isn’t any money you can use free data recovery programwhich is the best of free programs and shows pretty good results file recovery. The program is called. She restores files not only on the hard drive, but also files from flash drives, memory cards. You can download the program. The program is very easy to manage, I will describe how using this program you can recover files.
And so we download the program, install it on the computer and run it.
In this window we select which files you want to restore.
In the next window, select where the data was before deleting.
If the hard drive or flash drive is not formatted, then you can simply click Startedb. If the files that you need are not found, then run the program again and check the box Enable in-depth analysis (it will take much longer, but the data will be searched with great effort). If the disk or flash drive is formatted, then the checkmark is definitely needed.
Will begin process for finding deleted files. At the end of the search, a new window will open.
The window shows the files that were deleted. If you know where the files were, you can change the way files are displayed in folders. To do this, right-click in the found files window and select Display Mode \\ Tree. If you were looking for pictures, then thumbnail mode will be convenient for you Display Mode \\ Thumbnail View.
You can also switch to advanced mode by pressing the button Switch to advanced mode.
If you find the files you need, mark them with a tick and click Reestablish.
Specify the folder where you want recover deleted files and click OK.
At the end of the file recovery, this window will open. Then you can close recuva program and go to the previously specified folder to view the recovered files.
If the program did not help you, then try the R-Studio program. The program costs about 1500 rubles version for file systems NTFS or FAT, full version It costs about 2500 rubles. If your data is important to you, then you can download a demo version of the program. Which will show you the files that it can recover and if you need them, you pay a license and recover files. But if she didn’t find the files you need, then your path lies in data recovery service. If you live in Moscow then best company data recovery is located.
Accidental deletion of files or damage by viruses can cause the loss of personal information or work data. Therefore, you need to know how to restore them.
The most valuable information is stored and stored in files on users' computers for years. In today's world, all life is in digital format. Storing data on your home PC is very convenient, because there you can store any amount of information that you can always quickly find, edit or view.
- Which program to recover data from a flash drive is better
However, digital copies have a huge drawback, as they can be deleted for various reasons. In this case, users who have not backed up their data may lose the most valuable memories of their lives. Therefore, the question: “how to recover deleted files” is of such great importance and is always relevant.
How to recover deleted files using regular Windows tools
The most common reason for deleting files is user carelessness. However for quick recovery In this case, you can use the built-in function of the "Recycle Bin". This is where deleted data gets in, unless of course the remote data storage function is disabled or the space allotted for them has not ended.
From the basket
After installing Windows, the recycle bin is usually located on the “Desktop”. However, the shortcut may be removed or its display disabled. In this case, it must be activated. You can do this in the personalization settings.
Desktop Icon Options
To return files deleted to the trash, you just need to select the necessary ones and right-click on the menu and press “Restore”. The data will be returned to the folders from which they were deleted.
Information can be restored in this way only if it has been erased by the user and the “delete permanently” function, called by the “Shift” button, has not been used. In addition, settings can be set in the settings that will not allow data to be saved in the basket.
Backup and Restore
Not all deleted files and do not always end up in the trash. Starting with the seventh version of Windows, the developers have introduced the function "Restore files from the archive." Using this option, you can roll back the file version to the previous one or restore it from the version when the backup was created.
- Safe mode Windows 8 - the main means of dealing with errors and viruses
The function does its job well if you are editing documents and you forgot to save the old copy, but you need it for comparison or report. Archiving works as part of creating a recovery point, which means that file versions are saved only when the program is running.
In order to start archiving or configure it to select files and folders, you must perform the following steps:
- Go to the "Control Panel" and select the item "Backup and Restore";
- Click “Change Settings”;
- Follow the system recommendations until the setup question appears;
- Select the folders you are interested in, for example, those that most often change.
After waiting for the completion of the system, the time of which depends on the size of the folder, you can safely continue to work. The question of how to recover deleted files will cease to be a problem, since it will take several minutes and be solved by pressing a few buttons. Having set all the archiving parameters correctly, you will always have a fresh copy of the data.
How to recover deleted files using software
The problem is that creating a backup copy is not relevant for someone involved in complex calculations and schedules, since it is not created every minute. In addition, the rollback will not help to return files that were deleted when formatting the hard drive partition, for example, during reinstallation of the operating system. The same goes for mashing information with viruses or damaging the boot area of \u200b\u200ba drive.
The specifics of storing data on the hard drive is such that the files are not completely deleted. The fact is that the data is a physically magnetized section carrying an information code. By deleting a document or picture, you only change the display table of the folder. At the same time, the file itself remains in place until this place is occupied by other information. That is, until the place where the data is located is overwritten. Using special software You can easily cope with a task such as recovering deleted files.
R-Studio
This program allows you to work with various sources of data storage, such as flash drives, network attached storage and memory cards. You can download it from the official site. In addition, there are versions for Mac and Linux that allow you to recover files on other operating systems.
It is very convenient to search for deleted files, thanks to its wide capabilities. You can create selections by many parameters, such as:
- Date of deletion;
- The name of the file or folder;
- Extension or type of information;
- Scan the entire section or folder for deleted data;
- Ability to set several parameters and save search results for further work with data.
R-Studio has an easy intuitive interface in Russian and a convenient hint system that will allow an inexperienced user to understand the functionality of the software.
FROM using R-Studio You can easily solve the problem of recovering deleted files, as well as:
- Recreating an entire section or logical drive after formatting;
- Returning operability of the boot area of \u200b\u200bthe drive;
- "Treatment" corrupted files after the action of viruses;
- Restoring the file system structure as well as resolving issues with broken sectors and "bads."
Magic unerase
The program is easy to control. For each type of work, many of its versions are distinguished, each of which is designed to perform its functions. You can download the program from the official site.
If you need to restore the partition hard drive or a specific file of a certain format, it is better to use a strict program. It is embedded in the operating system explorer and, after scanning for deleted files, displays them together with existing data. This allows you to easily view and restore the data that is necessary, while not setting any search criteria, but simply opening folders.
Total:
If you have never been involved in recovery, then you can take the help of specialists. However, you can always try to return the data yourself. Using any program or regular windows tools, do not forget about some mandatory rules:
- Do not return data to where it was deleted (does not apply to partition recovery or use backups and baskets). This can cause a complete deletion of information in case of problems during the recovery process;
- After the necessary files have been deleted, do not install new software or download new data. Information can be replaced, after which it will not be subject to rollback.
If your data was deleted due to exposure to viruses, your hard drive is damaged or your child is “foolish”, do not worry. There are a lot of ways to recover files, and thanks to this necessary information will be refunded.
05.09.2016
Accidental deletion of files or damage by viruses can cause the loss of personal information or work data. Therefore, you need to know how to restore them.
The most valuable information is stored and stored in files on users' computers for years. In today's world, all life is in digital format. Storing data on your home PC is very convenient, because there you can store any amount of information that you can always quickly find, edit or view.
However, digital copies have a huge drawback, as they can be deleted for various reasons. In this case, users who have not backed up their data may lose the most valuable memories of their lives. Therefore, the question: “how to recover deleted files” is of such great importance and is always relevant.
The most common reason for deleting files is user carelessness. However, for quick recovery in this case, you can use the built-in "Recycle Bin" function. This is where deleted data gets in, unless of course the remote data storage function is disabled or the space allotted for them has not ended.
From the basket
After installing Windows, the recycle bin is usually located on the “Desktop”. However, the shortcut may be removed or its display disabled. In this case, it must be activated. You can do this in the personalization settings.
Desktop Icon Options
To return files deleted to the trash, you just need to select the necessary ones and right-click on the menu and press “Restore”. The data will be returned to the folders from which they were deleted.
Information can be restored in this way only if it has been erased by the user and the “delete permanently” function, called by the “Shift” button, has not been used. In addition, settings can be set in the settings that will not allow data to be saved in the basket.
Backup and Restore
Not all deleted files and do not always end up in the trash. Starting with the seventh version of Windows, the developers have introduced the function "Restore files from the archive." Using this option, you can roll back the file version to the previous one or restore it from the version when the backup was created.
The function does its job well if you are editing documents and you forgot to save the old copy, but you need it for comparison or report. Archiving works as part of creating a recovery point, which means that file versions are saved only when the program is running.
In order to start archiving or configure it to select files and folders, you must perform the following steps:
- Go to the "Control Panel" and select the item "Backup and Restore";
- Click “Change Settings”;
- Follow the system recommendations until the setup question appears;
- Select the folders you are interested in, for example, those that most often change.
After waiting for the completion of the system, the time of which depends on the size of the folder, you can safely continue to work. The question of how to recover deleted files will cease to be a problem, since it will take several minutes and be solved by pressing a few buttons. Having set all the archiving parameters correctly, you will always have a fresh copy of the data.
How to recover deleted files using software
The problem is that creating a backup copy is not relevant for someone involved in complex calculations and schedules, since it is not created every minute. In addition, the rollback will not help to return files that were deleted when formatting the hard drive partition, for example, during reinstallation of the operating system. The same goes for mashing information with viruses or damaging the boot area of \u200b\u200ba drive.
The specifics of storing data on the hard drive is such that the files are not completely deleted. The fact is that the data is a physically magnetized section carrying an information code. By deleting a document or picture, you only change the display table of the folder. At the same time, the file itself remains in place until this place is occupied by other information. That is, until the place where the data is located is overwritten. Using special software, you can easily cope with a task such as recovering deleted files.
R-Studio
This program allows you to work with various sources of data storage, such as flash drives, network attached storage and memory cards. You can download it from the official site. In addition, there are versions for Mac and Linux that allow you to recover files on other operating systems.
It is very convenient to search for deleted files, thanks to its wide capabilities. You can create selections by many parameters, such as:
- Date of deletion;
- The name of the file or folder;
- Extension or type of information;
- Scan the entire section or folder for deleted data;
- Ability to set several parameters and save search results for further work with data.
R-Studio has an easy intuitive interface in Russian and a convenient hint system that will allow an inexperienced user to understand the functionality of the software.
Using R-Studio, you can easily solve such a problem as recovering deleted files, as well as:
- Recreating an entire partition or logical drive after formatting;
- Returning operability of the boot area of \u200b\u200bthe drive;
- "Treatment" of damaged files after the action of viruses;
- Restoring the file system structure, as well as eliminating problems with bad sectors and "bads".
Magic unerase
The program is easy to control. For each type of work, many of its versions are distinguished, each of which is designed to perform its functions. You can download the program from the official site.
If necessary to restore hard section a disk or a specific file of a certain format, it is better to use a program of strict orientation. It is embedded in the operating system explorer and, after scanning for deleted files, displays them together with existing data. This allows you to easily view and restore the data that is necessary, while not setting any search criteria, but simply opening folders.
Total:
If you have never been involved in recovery, then you can take the help of specialists. However, you can always try to return the data yourself. Using any program or regular Windows tools, do not forget about some of the mandatory rules:
- Do not return data to where it was deleted (does not apply to partition recovery or the use of backups and recycle bins). This can cause a complete deletion of information in case of problems during the recovery process;
- After the necessary files have been deleted, do not install new software or download new data. Information can be replaced, after which it will not be subject to rollback.
If your data was deleted due to exposure to viruses, your hard drive is damaged or your child is “foolish”, do not worry. There are a lot of ways to restore files, and thanks to this, the necessary information will be returned.
Having worked for many years in the field of data recovery, we are used to seeing such emails like this:
“My computer started to slow down, and I decided to reinstall Windows. To be sure that all the glitches go away, I decided to reinstall everything from scratch on a new partition. After reinstalling Windows, all my files disappeared. I know that you guys have a lot of data recovery tools. Do you have a program to help me? I tried your recovery program deleted filesbut she didn’t find anything. Will you help? ”
Indeed, using a simple program to recover deleted documents, you will not always be able to achieve the desired result, especially if you installed it on the same drive from which you plan to recover data. But first, let's look at what happens when you reinstall Windows.
Updating Windows or installing it?
There are several ways to install Windows on top of an existing installation. You can update (restore) an existing OS, which, as a rule, is not a destructive process and should not affect your files. But this method works when you upgrade or restore the same version of Windows that you have installed. By the same version, I mean that if you have 32-bit windows version 7, you can’t upgrade it with a 64-bit version of the same Windows 7. They should be identical.
In some cases, you can upgrade your Windows to a new level, and even a new OS. For example, Windows 7, Windows 8 and 8.1 were released in 32-bit and 64-bit versions and numerous editions (Home version, Professional, Full and many others). But there are a number of complex rules that affect whether your system is up to date. For example, you cannot upgrade the 32-bit version of the OS to 64-bit. If you install the 64-bit version on top of 32-bit Windows, it will either run in parallel or run new installationby destroying all your data.
And although Microsoft will warn the user many times before permanently deleting a partition or reformatting an existing one, most likely such warnings will be safely ignored, as well as multi-page license agreements. This is data loss!
How to recover data after reinstalling Windows
If circumstances have already happened that you have a fresh copy of windows, but there is not a single document, photo and other files on the hard drive, you need to be very careful so as not to aggravate the situation.
First and foremost, turn off the computer and remove the disk. You do not need to start Windows on the same drive from which you want to recover files. This disk must be connected to another computer, as an additional. Not another computer? Want to try recovering your data with a freshly installed Windows OS? Then, most likely you have nothing important or worth restoring, or you do not worry about your data at all. If there is, then you need to remove the disk from your computer and connect it to another (you can also start Windows with external hard disk or other media). Just make sure that the data recovery tool is installed on this device.
Choosing a data recovery tool
If you are going to recover files that are lost after reinstalling the operating system, a simple tool to recover deleted files may not be enough. The fact is that most of the utilities for recovering deleted files will search for entries in the file system, search for traces of files and folders that are marked as deleted. But, after reinstalling Windows (especially if this was accompanied by a redistribution and / or formatting of the disk), the original file system was changed. And the usual tool for recovering deleted files has nowhere to look for them.
You need a universal tool that data recovery specialists use, such as Hetman Partition Recovery. This tool analyzes the hard disk for the presence of parts of the file system that was previously used. If such pieces are detected, they will be added to the list of volumes available for recovery.
But what if traces of old partitions or file systems cannot be detected? Even so, much information can still be recovered. These are documents (DOC / DOCX, XLS / XLSX, as well as other formats), images, videos, databases, electronic messages, compressed archives, and many other information.
Special Case: SSDs
All the information above applies only to traditional hard disk drives (HDDs). If you reinstall the system on Windows 7, Windows 8, 8.1 or Windows 10, the operating system will erase all traces of information that existed on the SSD before the new OS. It is not a fact that your information will then be recoverable.
