Android gadget sync mobile gadgets lately has undergone major changes. The basis of the new technology was the use of MTP Device-drivers provided that the device is directly connected to a laptop or computer via a universal USB port.

What is an MTP Device?

For the first time, MTP technology was released back in 2008 in mobile devicesah with honeycomb in the operating room android system Ice Cream Sandwich. While this system considered the main part of the package windows programs Media, however, then it was standardized as one of the main types of USB devices. It is for this reason that today, stationary operating systems when connecting a mobile device determine it only as MTP Device. However, in essence, this development is not new. It strongly resembles the PTP protocols or one of its variants in the form of additional extensions.

USB Mass Storage Alternative

If we talk about the functioning of this system, it becomes clear that it is basically impossible without installing the driver. However, when compared with the usual exchange of information via USB MTP Device, the driver works a little differently. The main difference between the new technology is as follows. When using a standard connection using USB Mass Storage, two partitions are created (for applications and media files separately). One section always depends on the other.

However, in some cases, a situation arises when the tablet or smartphone does not have access to one of the sections, and the computer at the same time perceives both sections. It is for this reason that a situation arises when applications installed on the SD card do not start and do not work. When using the MTP Device, there are simply no such restrictions. There is also no need to use the FAT file system.

If previously the redistribution of free disk space was carried out due to the influence of one partition on another, then in this case this does not happen. To put it more understandably, earlier an increase in the free space of a partition led to a decrease in another partition. Now both sections remain unchanged.

Installing the driver on Windows

Consider how the standard driver installation is performed when synchronizing the device with Windows. Suppose we have a tablet and a smartphone from Samsung. When you first connect a device to a computer, as a rule, the system displays a message stating that a new device was found. In our case, we will talk about the MTP Device Samsung. The system will install the driver necessary for synchronization. After that, the data transfer will be carried out by analogy with the usual USB connectionwhen an external SD card is detected and internal storage. Of course, errors like “driver not installed” may also appear. Let us dwell on them a little later.

In principle, on such devices almost always automatically installs all the necessary drivers operating system Windows You can also use alternative methods that are associated with the installation of appropriate programs for the tablet and smartphone. So, for example, the same MTP Device drivers are automatically installed on Samsung products with the latest version of the Kies application. It is also worth noting that Samsung does not release drivers for each specific model of mobile gadget.

So look for drivers for Galaxy Note 2 or for S6 does not make sense. HTC smartphones require specialized software called HTC Sync Manager. In some cases, firmware installation via FastBoot mode is required. You can find a driver for LG devices on the official website of the manufacturer.

For Nexus, you can try using the ADB RUN utility or install the drivers using the standard “Device Manager”. When using gadgets from Sony, two options are possible: using the FlashTool drivers or installing Sony PC Suite. There is no particular difference in principle, however, it should be borne in mind that these are two mutually exclusive programs. When installing one of them, it is better to remove the other immediately.

Use on Mac OS

When synchronizing with apple laptops and poppies, the use of devices classified as MTP Device is not much different from Windows like it. To be sure, you can only install android app File transferand that’s it. Otherwise, problems should not arise.

Installation on Linux systems (Ubuntu)

On Linux systems, due to their specifics, installing the MTP Device drivers is a bit more complicated. For example, consider the process of installing drivers for the Ubuntu version when installing the driver for Nexus. You must use the command window in which the combination sudo nano –w /etc/udev/rules.d/51-android rules is written.

After this, the command SUBSYSTEM \u003d\u003d “usb”, ATTR (idVendor) \u003d\u003d “04e8”, ATTR (id Product) \u003d\u003d “6860”, MODE \u003d “0600”, OWNER \u003d “Username” is entered. After that, you need to execute sudo apt-get install mtpfs, sudo mkdir / media / GNexus and sudo chmod 775 / media / GNeus sequentially. Now you need to connect the gadget to the computer and enter the command sudo mtpfs - o allow_other / media / GNexus. After that, using Nutilis, you can move any folders and files. One important point: when all operations are completed, remember to use the final sudo umount mtpfs command.

Errors and methods for their elimination

Errors during driver installation, unfortunately, cannot be ruled out. In most cases, they occur when using Windows operating systems. Let's try to consider the most common errors, as well as ways to resolve them. First of all, you need to check whether the utilities used are latest versions.

If everything is in order, but the driver for the MTP Device still does not work, you can try to install it in manual mode. To do this, go to the "Device Manager". If the device does not work correctly or the driver is not installed, the device itself will be marked with a yellow icon. Everything is quite simple here. Find the driver update button in the properties and select only compatible devices from the list. If this operation does not help, you will have to uninstall the driver, and then reinstall it in auto mode.

If this does not work, indicate to the system the place where the installation distribution with the necessary information will be stored. In some cases, this is not effective either. The reasons for this may be a lot. In certain cases, the installation in the system saves fresh windows versions Media Player Most likely, you just need to check the system hard section disk for errors. The problem could be anything. Sometimes it happens that the "native" media player itself produces this type of error and malfunction.

This option cannot be ruled out either. In this situation, if you are using version of Windows 7 and higher, you can try to disable the multimedia components using the "Programs" section in the "Control Panel". There are many reasons for such failures. Therefore will have from the most simple ways solutions to this problem go to a more complex and cardinal method. In each case, it is necessary to take into account the specifics specific device. However, as practice shows, the universal solution to this problem may be to use system registry.

In the main HKEY_LOCAL_MACHINE section, it is enough to find the UpperFilters key and delete it by sequentially moving through the tree. This will not affect the performance of the operating system. However, the connection will finally work as expected. It is worth noting immediately that this method in most cases, effective for gadgets manufactured by Samsung.

Conclusion

IN this review We tried to briefly describe the main issues associated with the use of MTP technology. As you can see for yourself, the user will not have to work hard when installing the driver, unless of course you use Linux systems. All major errors when installing drivers are quite easy to fix. However, in each case, it is still desirable to establish what the cause of the problem lies. It is better to do this before performing drastic actions such as deleting system registry keys.

However, in most cases, there should be no glitches, especially if you install the most fresh versions additional software. In any case, just go to the official resources of the manufacturers of mobile devices. Surely, you can find the help section on the official website, which will describe the process of dealing with problems of this type. Most likely, the problem is not even in Windows, but in the disabled settings and functions, or even in the firmware of the device.

If you don’t want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer. It will select only qualified and updated drivers for all hardware parts all alone. To download SCI Drivers Installer, follow this link.

	Device:	USB MTP Drivers Installer
	Version:	2.0.0.18
	Date:	2017-09-03
	File Size:	1.12 Mb
	Supported OS:	Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8
		Download Drivers Installer

USB MTP: Drivers List

3 drivers are found for ‘USB MTP Device’. To download the needed driver, select it from the list below and click at ‘Download’ button. Please, ensure that the driver version totally corresponds to your OS requirements in order to provide for its operational accuracy.

Version:	5.2.5326.4762	Download
Date:	2012-05-10
File Size:	1.7M
Supported OS:

Version:	1.1.0.0	Download
Date:	2012-02-27
File Size:	8.8M
Supported OS:	Windows XP 64bit, Windows Vista 64bit, Windows 7 64bit, Windows 8 64bit

USB MTP: Supported Models of Laptops

We have compiled a list of popular laptops models applicable for the installation of ‘MTP USB device’. By clicking at the targeted laptop model, you’ll be able to look through a comprehensive list of compatible devices.

#	Manufacturer	Model	Devices
1	Ibm	8141WT1	34 devices list
2	Ibm	ThinkCentre S51 (8172Y3V)	23 devices list
3	HP	HP Compaq dc5100 SFF (EQ116US)	37 devices list
4	HP	KA915AA-ABF s3341.f	27 devices list
5	Seneca	V56683	33 devices list
6	HP	HP d530 CMT (DP002C)	28 devices list
7	Ibm	ThinkCentre M51 (8141WT1)

Android application / vnd.android.package-archive Android app

Android from A to Z: What is behind the abbreviation MTP, and how to properly manage it

MTP (Media transfer Protocol) first appeared on devices with Honeycomb. The protocol is slightly different from the usual USB Mass storage (UMS), in which you turn on the USB mod and start moving files. And since MTR became part on, it would be nice to find out all the nuances. In the post, we will try to figure out as much as possible what exactly this protocol is, what is the need for it, and how to configure it to simplify file transfer.

What is MTP?

MTR is a set of custom extensions for Ptp (Picture Transfer protocol ), which aims to transfer files and related metadata by USB. Still here? Then let's continue.

Initially part of the structure Windows Mediabut in 2008 MTR was standardized as type USB devices, thereby becoming an established standard. If you were the owner of iriver or Creative MP3 players, you probably came across MTR. If you use a digital camera, which when connected to a PC is automatically recognized as a device, then it is involved in the work Rtrwhich, in essence, is the same as MTR. Thing is old enough, but not for Android.

Why use MTP instead of USB mass storage?

The essence of use Mtp is that now manufacturers of mobile devices do not need to create two separate sections, one for applications, the second for media files. Previously, a sin was noticed behind them, which consisted in expanding the second section at the expense of the first, and this very often led to a lack of space for new applications. FROM MTR both types of files can be stored together.

At USB mass storage There is one big drawback - when you create memory partitions, then one of them is completely in the power of the other device. This means that your tablet or smartphone will not have access to this section, but the computer to which the device is connected can use it in every way. For this reason, some applications, and especially widgets placed on the SD card, do not work.

Another advantage MTR is an no need to use the FAT file system for storage. This ultimately leads to more quick work device.

MTP installation

From the time of Windows XPMtp devices without problems work with. Connect yourGalaxyNexuschoose Mtp as the type of connection, the computer operating system itself finds the necessary drivers, you will only need to wait a bit. Moving files between your smartphone and PC without any problems is provided. But what to do to those users who have preferredLinux and Mac?

Mac OS

Set UDEV rule, having opened rules file through terminal

sudo nano -w /etc/udev/rules.d/51-android.rules

Then enter next line at the bottom of the file (be sure to include the username):

SUBSYSTEM \u003d\u003d "usb", ATTR (idVendor) \u003d\u003d "04e8", ATTR (idProduct) \u003d\u003d "6860", MODE \u003d "0600", OWNER \u003d " "

Then the turn for:

sudo apt-get install mtpfs
sudo mkdir / media / GNexus
sudo chmod 775 / media / GNexus

Then connect Galaxy Nexus to the PC and in the same window as in the previous window enter:

sudo mtpfs -o allow_other / media / GNexus

This all allows you to drag and drop files using Nautilus, and do not forget to enter the following command upon completion of work:

sudo umount mtpfs

Alternative

Alternatively, you can use a combination Wifi file explorer and Quicksshd and to send wireless files.

Android from A to Z: What is behind the abbreviation MTP, and how to properly manage it:
rating 80 out of 80 based on 80 ratings.
Only 80 reviews.

Recently, the synchronization of mobile gadgets based on Android OS with standard computer systems has undergone quite strong changes. The new technology was based on the use of the so-called MTP Device driver when directly connecting the device to a computer or laptop via a universal USB port.

What is an MTP Device?

In general, MTP technology (Media first saw the light back in 2008 on mobile gadgets with Honeycomb in OS Android Ice Cream Sandwich. At that time it was considered an integral part of the Windows Media package, but then it was standardized as one of the main types of USB devices.

That is why now stationary operating systems when connecting a mobile gadget and define it as an MTP Device. In fact, the development itself was not something new, since it very much resembles the PTP (Picture Transfer Protocol) protocols, more precisely, is one of its varieties in the form of additional extensions.

MTP Device Driver as an Alternative to USB Mass Storage

As for the functioning of such a system, it is probably clear that without installing the driver it is basically impossible. However, compared to the usual data exchange via USB MTP Device, the driver works in a slightly different way.

The most important difference, it is an advantage of the new technology, is as follows. The fact is that when using a standard connection when uSB help Mass Storage creates two partitions (for media files and for applications separately), and one of them always depends on the other. There is a situation when a smartphone or tablet does not have access to one of the sections, and the computer perceives both. That is why the situation arises when the applications installed on the SD card, not only do not work, but even do not start.

In the case of using the MTP Device, there are no such restrictions. In addition, there is no need to use the FAT file system. And if previously redistribution free space was due to the influence of one section on another, in this case there is nothing like that. Simply put, before the enthusiasm for the free space of one partition led to a decrease in the size of the other. Now both sections remain unchanged.

Standard driver installation on Windows

Now let's see how the standard driver installation is performed when synchronizing the device with Windows. Let's say we have a Samsung smartphone or tablet.

As a rule, usually when you first connect a device to a computer terminal, the system displays a message in the system tray that a new device has been found (in our case, Samsung MTP Device). The system itself installs the driver necessary for synchronization without any problems, after which the data transfer can be carried out similarly to using a conventional USB connection, when both the internal drive and the external SD card are detected. Errors, of course, may appear (such as “Samsung Mobile MTP Device Driver Not Installed”), but we will dwell on them a bit later.

General driver installation guidelines for most Android devices

In principle, the automatic installation of the necessary drivers by the Windows operating system itself almost always works. However, you can use alternative methods related to the installation of related utilities for a smartphone or tablet.

So, for example, the same MTP Device Samsung driver is installed automatically if the latest version of the Kies application is available. Note that Samsung does not release drivers for each specific model of a mobile gadget, so it makes absolutely no sense to look for them, say, for S6 or Galaxy Note 2.

For HTC smartphones, you need to use specialized software called HTC Sync Manager (sometimes it may be necessary to install firmware via FastBoot mode). For LG, you can find the driver on the official website of the manufacturer specifically for specific model. For Nexus, you need to use the ADB RUN utility and install the driver from the standard “Device Manager”. If using Sony gadgets, there are two options: installing Sony PC Suite or using FlashTool drivers. In principle, there is no difference, but you need to remember that these are two mutually exclusive programs - when you install one, the other must first be deleted.

Use on Mac OS

The use of devices classified as MTP Device when synchronizing with stationary "poppies" or "apple" laptops is not much different from that of Windows.

Unless for complete confidence, you can additionally install the Android File Transfer application, that's all. Otherwise, there should be no problems.

Installation on Linux (Ubuntu)

On Linux systems, due to their specificity, installing the MTP Device drivers looks a bit more complicated. As an example, consider this process for installing a driver for Nexus.

So, we use the command window, in which we first write sudo nano -w /etc/udev/rules.d/51-android.rules (setting UDEV rules). Then we enter the command SUBSYSTEM \u003d\u003d "usb", ATTR (idVendor) \u003d\u003d "04e8", ATTR (idProduct) \u003d\u003d "6860", MODE \u003d "0600", OWNER \u003d "<Имя пользователя>", after which we successively execute the lines sudo apt-get install mtpfs, sudo mkdir / media / GNexus and sudo chmod 775 / media / GNexus.

Next, connect the gadget to the computer and enter sudo mtpfs -o allow_other / media / GNexus. Everything, now, using Nutilus, you can deal with the movement of any files and folders. Yes, the most important thing. When all operations are complete, be sure to use the final sudo umount mtpfs command.

Possible errors and solutions

Unfortunately, the appearance of errors is also not excluded. In most cases, this applies only to Windows operating systems. Let's try to consider the most common failures and the simplest methods for their elimination.

First of all, it is worth checking whether the related utilities correspond to the latest versions. When using them, it is advisable to download the latest distribution from the manufacturer's website.

If the driver for the MTP Device still does not work, you can try reinstalling it manually. To do this, go to the "Device Manager". In theory, if the driver is not installed or the device itself does not work correctly, it will be marked with a yellow icon. Everything is simple here. You need to find the driver update button in the properties, and then select only compatible devices from the list. If this does not help, you will have to remove it, and then perform the installation again in the automatic mode. If this does not work, you will have to indicate to the system where the installation distribution kit containing the necessary information is stored.

Sometimes, however, this does not help. The reasons can be any number. In some cases, installing the latest version of Windows Media Player on your system may help. You probably just have to check the system partition. hard drive for errors, but you never know what could be. It also happens that this type of error or malfunction can be produced by the "native" media player itself (this option, unfortunately, is not excluded). In this situation, if you use versions of Windows in the form of "seven" and above, you can try to simply disable the multimedia components in the program section of the Control Panel.

As already clear, the reasons for such failures simply can not be counted. Therefore, you will have to move from the simplest methods to solve the problem to more complex or even cardinal, given the specific nature of the cause in each case and for each specific device.

However, as practice shows, one of the universal solutions may be to use the system registry. Here you need to find the key UpperFilters and delete it in the main section HKEY_LOCAL_MACHINE through sequential movement through the tree (System \\ CurrentControlSet \\ Control \\ Class). This will not affect the performance of the OS, but the connection will work as expected. Just note that in most cases, this method can be used for gadgets from Samsung.

Conclusion

Here, in principle, in a nutshell, and all that relates to the main issues associated with the use of connections using MTP technology. As you can see, you don’t have to work hard to install the driver, except in Linux. The main errors are eliminated quite easily, however, for each case, it is advisable to find out the root cause before taking any cardinal actions such as deleting registry keys. But in most cases there shouldn’t be any failures, especially if you install the latest versions of additional software for your gadget.

In any case, you can simply turn to the official online resources of mobile equipment manufacturers. Surely there is a help section describing problems of this type. Perhaps the problem is not even in Windows, but, for example, in the firmware of the device or disabled functions and settings.

Recently, I was faced with the fact that my smartphone completely refused to be defined in Windows 8.1 as an MTP device. At the same time, connecting and transferring file files in PTP mode worked properly, which of course spoke about the health of the equipment. Using the phone with such a malfunction became extremely inconvenient, because the Mass Storage mode was not implemented in my smartphone, and in the PTP mode, only the DCIM and Pictures folders of the smartphone were visible to me.

Therefore, I had to additionally use the file manager on Android to transfer the necessary files from these folders.

If you transfer the smartphone to the MTP operation (file transfer) mode, then in the Windows device manager it was defined as an unknown device.

Natural desire to update the driver automatically

led to the expected error:

How to fix Windows MTP Error

To fix the error connecting the Android smartphone in MTP mode, you must reinstall the drivers in manual mode. To do this, go to the device manager, click on unknown device and click the update driver button.

Next, select the option “Search for drivers on this computer”:

In the next window, select the item "Select a driver from the list of already installed drivers":

In the list proposed by the system, select “Android Phone”:

And then the compatible USB - MTP device driver:

After which you will see a message about the successful installation of the MTP driver:

After mTP settings drivers in manual mode, my smartphone began to display correctly in the device manager:

MTP file transfer mode has been successfully restored.

What is MTP?

MTP (Media Transfer Protocol) is a hardware-independent protocol developed by Microsoft to connect digital players to a computer.

In the Windows operating system, MTP is not file system, but it is supported at the level of application software, therefore, you won’t be able to use your “favorite file manager”, files can be recorded only through Explorer and Windows Media Player.

This is not the best protocol for exchanging data between a computer and a smartphone, but, unfortunately, you have to use it on devices where the mode is not implemented USB drive Mass storage