USB cable
First turn on the phone and laptop, then connect the phone to the cable, and connect the cable to the USB port on the laptop. The cable itself usually comes with a phone and a driver disk and a program for controlling a mobile phone from a computer. But it depends on the model.
After connecting, Windows will open the hardware installation wizard. In the process, the OS will “see” the flash drive of your phone, as well as the modem, if you have a smartphone. The program for working with the phone through the computer depends on the brand of your mobile phone, for example, Nokia has Nokia Suite. In addition to transferring photos, music and video files, this way you can access the Internet.
Bluetooth
Connecting the phone to the laptop via Bluetooth is as follows: turn on the "Blue tooth" on your phone and run the program for working with Bluetooth on the laptop. If you did not find one on it, then refer to the website of the manufacturer of your computer.
In this program, enable the search for new devices and when finding your mobile device, connect to it. It is possible that to create a connection you will be asked to create and enter the code on the phone and on the laptop. Via Bluetooth, you can also sit on the World Wide Web.
Wifi
This method of connecting your phone to a laptop via Wi-Fi under running windows 7, but suitable for XP. So, we go along the path: "Start / Control Panel / Network and Internet / Network and Sharing Center / Wireless Network Management / Change adapter settings / Add button". In the new window, select "Create a network computer - computer" and click "Next". We set any “Network Name”, set “WEP” in the security type, drive in the password, check the box “Save the parameters of this network” and click “Next”.
Again, go to "Change adapter settings", on the connection we created, right-click on the menu and click "Properties", where in the "Access" tab, check "Allow other users to use the Internet connection this computer", click" OK. "We select" Wireless Network Connection "in this folder and go to its properties, where we open" Properties "already" Internet Protocol version 4 "and prescribe the following: IP address not used by other connections, subnet mask, usually 255.255.255.0, then the main gateway, which is displayed in the properties of "Internet Protocol version 4", we look at the preferred DNS server in the same place, but we do not fill out the alternative DNS server. We are connected to this network. Now your laptop has become a point wifi access. On your phone we connect to this connection by entering a password.
When buying a new phone, I would like to quickly transfer all my favorite songs, photos, pictures to it, so that you always have them at hand. To do this, simply connect the phone to the computer and perform the copy. However, for novice users, such a simple operation often turns into a serious problem.
First, let's figure out how to connect the phone to the computer. There are two most common ways to connect modern mobile devices to a PC: using a USB cable or via Bluetooth.
Connecting via a USB cable is considered one of the most reliable. It comes complete with also attached. So, we connect the telephone and the computer with each other through a cable. Now the fun begins: in order for the PC operating system to “see” your device, you need to download the appropriate drivers, only after that it will be identified and ready to work. Usually, a software disc is also included. However, some manufacturers place the driver folder directly in the phone’s memory, and when connected to the computer, the user is prompted to install them. phone (or module internal memory, depending on the design) will be 
displayed on computer as removable drivewhere you can perform standard operations: copy, rename folders, delete files.
Often, owners of expensive smartphones ask on the forums for advice: "I can’t connect my phone to my computer through a cable. I installed drivers, but the device is still not recognized." The fact is that in order to ensure the correct connection of smartphones of some manufacturers (in particular, such as Samsung, Sony Ericcson) on a computer, you must install special program- intermediary. It can be downloaded on the official website of the developer for free.
Now about how to connect the phone to the computer using the wireless module. Most modern PCs and smartphones have a built-in Bluetooth adapter. Before connecting the phone to the computer, make sure that Bluetooth on both devices is turned on and visible. 
In the computer menu, right-click on the “Bluetooth” icon, select “Add New Connection”. The search for new devices will begin, after its completion, from the list provided, select the name of your phone and click on it. Then enter any digital code that you will need to redial on the phone. If necessary, additional synchronization settings can be made through the "Options" menu. When the devices are connected, a new shortcut with the name of your phone appears in the computer’s Bluetooth menu. In order to send, for example, a picture, you just need to right-click on it and select "Send", then select one or more files and click "OK". In the window that appears, the transfer process is displayed.
So, we figured out how to connect the phone to the computer, and made sure that there was nothing complicated about it, it was enough just to carefully follow all the instructions.
This question worries many and about how you can connect the phone to the computer, we will describe in this article. Today, there are several effective methods that will allow you to connect these two devices. Why might you need to connect your phone to a computer? By connecting the mobile device to the PC, you can:
move photos;
Download new songs and melodies to your phone;
update software;
perform other actions.
Connecting a mobile phone to a computer is possible in several ways:
using a USB cable;
using a special cable that comes with mobile phone;
via infrared or bluetooth.
We will tell you about each of the proposed methods below. Following our recommendations, you can easily connect your phone to a PC.
If you have an IMPORTANT or very URGENT question, ask !!!
How to connect a phone to a computer
To successfully connect a mobile to a computer, you need to:
activate the function "In modem mode" on the phone. If you have Android OS installed, go to settings, then click "Wireless" and then activate the option "In modem mode";
Before you perform the above steps, you must turn on the Internet on your phone;
You must enter a password so that no one has access to your Internet.
If you need to drop photos from your phone to a computer, then this can be done in several ways:
using special programs;
by sending data on e-mail;
via infrared or bluetooth.
If you want to transfer data from your phone through a special program, then you can find and download it via the Internet.
Connecting the phone to the computer: optional
To successfully connect the mobile device to personal computernecessary:
download a special program;
Choose a data transfer method.
If your computer does not see the phone, then you need to install special drivers that can be downloaded from the Internet.
To connect the phone on which the Android system is installed to the PC, do the following:
1. Find the USB cable, download the necessary drivers. Connect the phone to the PC using the cable and find mobile device through My Computer.
2. If your phone and computer have the ability to transfer data via Bluetooth, then use this method to transfer data.
3. It is also possible to transmit data via infrared if it is on your phone.
4. You can also transfer data using a special cable, which is usually sold with the phone. Connect the mobile and PC with a cable and after the computer detects the device, you can transfer data.
Why might you need to connect your phone to a PC? Firstly, this is a great way to transfer data. Secondly, in this way you can download music to your phone. Thirdly, by connecting the phone to the computer, you can view the video files stored in the phone’s memory on a large screen.
At the moment, all devices of a new generation: smartphones, tablets, phones are easily connected to a computer through uSB cable or wifi. And it would seem that this is nothing complicated, but by monitoring the forums, it turned out that there are many problems with this process. And all because all these gadgets are connected in different ways. But in this article we will try to highlight the most universal way.
First, find out what operating system your phone is running on. It can be Android, iOS, Windows and some other less popular in our country. Who does not know which gadget he uses, he goes to the Settings menu and looks for the item "About phone". You recognize your system, and now use the instructions below to make sure you have connected the cable in both directions.
Guide for Android 2.1 - 2.3.7
1. Follow the steps: Settings - Applications - Development - debugging - and then you need to enable debugging.
2. When the device is recognized, a new icon will appear on the top of the screen.
3. On the smartphone, click consent to the use of data.
We connect Android 4.0-4.1.2
1. Move in this direction: Settings - More - USB utilities. You will see the “Storage device” section and click “Connect” here.
2. After that, an information message will appear on the computer, on which the green Android icon will be displayed. Agree to join USB drive. When the icon changes color to orange, folders with phone files will become available.
Android 4.2 and higher
A very tricky system was invented in these versions. To get started, you need to obtain developer rights. Go to the "About the phone" section, where there is information about the version of the assembly. Click on number 7 times. When you touch the screen three times, a message appears that in order to get additional rights, you need to click 4 more times. Do it. A new option should appear - “Developer Options”. Go into it and enable debugging for USB.
IOS and Windows
With these operating systems a little simpler. So, if you are a happy owner of an iPhone or iPad, you will need: cable, your device, and computer. The last device is a program that identifies the model of your phone, and independently through the Internet, selects the necessary drivers for the correct opening file system. If you do not install iTunes, then the computer will not be able to other files. After you installed the program, connected the phone, it will look like a removable drive in the “ My computer ».
Well, we reviewed almost all the most popular operating Systems phones, and their methodology for connecting via a USB cable to a computer. We hope that the guides helped you figure it out and throw off your favorite music or cool pics.
