Comments on: 42
Hello dear readers, today I would like to show you how to test hDD and help us, and to be more precise beaten.
I will say one thing, if you are looking for a program from under Windows, then you are wasting your time! Testing program hard driveov can only test, but not fix your hard drive from bad sectors. And this program is capable of both testing and fixing your hard drive.
I very often encounter such a problem when people’s information on the hard drive starts to deteriorate, the computer starts to slow down, hang, and then you have to test the equipment. Of course, the first thing you need, but if it is in order, then almost the rest of the percentage falls on the hard drive.
So, consider a program that will help you. I will consider HDAT2 version 4.53, it has helped me out many times and not only me, I will not advise you of this bad.
To get started, download the program and write to a USB flash drive or disk, you can see how to do this in the articles:
Now download the image for free testing programs and hard fixes drives:
Hard Drive Testing Software
In general, if we recorded, we start ... I Hiren’s Boot CD 15.1 for me it looked like this:
Now select Check and Repair bad sectors.
The program will start the test, progress will be visible as a percentage.
If your strip is completely blue, then this is good, if not, then in the best case, the damage will be software and program for hard testing drives everything will be corrected successfully. If not, you will have to buy a new hard drive.
My hard drive was error free and the program for testing hard drives produced the following result:
Yellow cells are warning about imminent malfunction hard sectors drive them 0.
Red cells, that sector is faulty too 0.
And accordingly green cells, that sectors are fixed 0, because there were no broken ones.
That's the way it should be good hard disk.
That's all, I’ll say one thing. best hard drive testing software each has its own, but I recommended using this one, as often she helped me out, even helped when.
Quite often, a computer or laptop is connected precisely with errors and malfunctions in the hard drive. In this article, we will figure out how to check the health. hard drive with help windows tools and specially designed programs for this.
Checking for errors using standard tools
This method is equally effective for Windows Xp, Vista, 7, 8, and 10. You must:
If the notification “Windows cannot scan the drive that is currently in use” appears, click “Scan Schedule”.
So, now we are doing a reboot, and when the system boots up, a health test will run through the BIOS and fix media errors. Its duration can be from 2-3 minutes to an hour, depending on the characteristics of the hard drive and its capacity.
Checking the hard drive for errors through the command line
To start the scan, you must perform the following steps: go to "Start / All Programs / Accessories / Command Prompt." We right-click and click on “Run as Administrator”.
In the window that appears, execute the command “chkdsk disk_section: check_parameters”. Please note that this method works exclusively with drives that have been formatted in FAT32 or NTFS.
An example of a command is “chkdsk C: / F / R”. Its essence is as follows:
- Section C will be checked for errors;
- Found problems will be automatically fixed (parameter F is responsible for this);
- Bad sectors will be checked and information restored (parameter R);
If you want to diagnose the drive currently in use by the system, you will see a special notification. You will be prompted to perform a check at the next computer boot. To agree with this, press Y, for failure - N. According to the results of the verification, information about the verified data and the quantity bad sectors and errors found.
To obtain full list parameters, run chkdsk with a question mark as a parameter. But if you need a regular check for errors and sectors, then the above information will be enough for you.
It happens that the errors found during the scan can not always be immediately corrected, it is likely that this is due to the program running at that time. In this situation, an offline scan of the drive will be required: it is disconnected from work, diagnostics are carried out, and then it is connected back. To do this you need to enter in command line "Chkdsk C: / f / offlinescanandfix" (C: - disk partition). If its shutdown is not possible, then the check will be performed at the next reboot.
If necessary, after verification you have the opportunity to study the audit log. To do this, you need:
- Go to Windows Logs / Applications;
- Right-click on Application / Search;
- Search the word Chkdsk;
Program check
Of course, the above method is not always effective. Therefore, we will consider a number of programs such as Victoria. They will allow for the most thorough analysis. hard state disk on a computer or laptop.
Victoria
A utility for diagnosing and testing a hard drive. It will help you not only detect problems in his work, but also eliminate them.
The program has a number of advantages and useful functions:
- Reads the passport of the hard drive and provides detailed information;
- 5 diagnostic modes;
- Eliminates crashes;
- Displays unstable sections;
- Hides defects;
- Evaluates media performance.
Victoria is one of the best to date. It is able to solve problems with bad sectors and quickly bring a hard drive of any type to a usable state.
HDD Regenerator
One of the most effective programs for assessing the status and troubleshooting of drives. It makes it possible to obtain information about the current SMART status of the selected device and full control over it.
Among the main features are:
- Simple and intuitive interface;
- Full security
- Support NTFS and FAT;
- Pre-scan mode;
Real-time HDD monitoring;
That is, with the help of the regenerator you can test the hard drive as efficiently as possible.
Testdisk
Designed to determine the status and testing of drives. In addition to simple diagnostics, it also detects bad sectors and fixes all errors found. Its main functions include:
- Perform an analysis of the current state of the hard drive;
- Search for bad sectors;
- Recovery of deleted partitions;
- MFT correction;
Checking external hard drives;
In addition, the utility has a number of functions that are associated with the recovery of deleted files.
Hitachi Drive Fitness Test
An excellent program designed to find and fix problems on drives. It is universal, since any drives can be diagnosed. With its help, you can very quickly find out the current position of the hard drive, as well as get additional information about it.
Includes.
Hello! Sometimes the slow operation of the computer, and its freezing, is associated with errors on the hard drive (HDD). Today we will step by step check our hard drive for such errors and do our best to fix them. I will use for this as standard tools operating system, and a third-party program called Victoria.
Check the disk for errors using standard Windows tools.
We go into the computer and select the drive that you want to check. Then right-click on this drive and select "Properties",
Then select the tab "Service" and click "Check",
After completion, a window pops up:
If you have seven, then after clicking "Run test" on system drivea window comes out
Click "Disk Check Schedule." After that, you will need to restart the computer, and it will auto mode will scan the hard drive for errors. At this point, you don’t need to touch anything; upon completion, the computer will start up and you will see a familiar desktop. But, once again, this is for those who have Windows 7 installed.
Checking the disk for errors using Victoria
Victoria is a very useful and functional utility, thanks to which you can check hard disks Serial ATA and IDE for errors. The program is one of the best of its kind, so we will use it to assess the real technical condition of the hard drive.
First you need to download the Victoria image from the developer's site http://www.ihdd.ru/victoria. Download and unzip this archive and see the image,
Now you need to burn this image to disk. If you do not know how, then you can read the article. After we boot from this disk and select the boot mode (first option),
When the program interface starts, press the F2 function key so that the program automatically finds the hard drive. If this does not happen, then you need to manually force it to find the disk. Press the P key on the keyboard. If your computer has hard drives with SATA interface, then in the Select Port menu, select Ext. PCI ATA / SATA. To move up or down, you must accordingly select a key on the keyboard up or down, the choice is the "Enter" key.
After we select a disk which needs to be checked. To do this, just indicate the number and press "Enter"
(banner_ssilki_tekst)
Personally, I have this number 1. To check the surface of our disk, press the F4 key. The HDD scan menu window opens, where we specify the disk scan settings. The program will automatically offer to scan from the very beginning (0) to the end (29360128). We don’t touch anything here. We will leave linear reading, because thanks to it, disk diagnostics will be carried out as accurately and quickly as possible. I recommend choosing BB \u003d Advanced REMAP, because the check in this mode will be of high quality and errors will be automatically corrected without data loss. Press "Enter,"
At this point, the hard drive will begin checking to fix the "bad" areas. It’s impossible to say exactly how long it will take this process. It can last from 10 minutes to tens of hours, depending on the volume of the hard drive and speed.
When it's over, pull the disc out of the DVD-ROM-a and reboot the system.
The above methods hard check disk errors and their corrections are the most effective, so use them and recommend to friends.
If you deleted any important files, then do not despair because you can. Good luck
