Galaxy Note line is quite popular among users, therefore, like others android devices, there is a demand for their flashing. It’s not necessary to go to the professionals, just have a little knowledge about how to flash or Samsung Galaxy Note
Galaxy Note is a very popular tablet
Galaxy Note's lineup consists of both tablets and smartphones, but there is no big difference in the process of updating certain devices. If you know how to reflash a Samsung tablet Galaxy note N8000, then problems with the firmware of other devices should also not arise.
Flashing
The instructions are general and suitable for the entire line of tablets and Not phones. The main thing is to download your version of the update. Before starting any action with the device, read:
- There is always a risk that the tablet will turn into a "brick" if.
- First, you should completely read the instructions for the firmware, and only then proceed with it.
- Check that the wire in the USB and microUSB connectors is held securely.
- Download files with "update" from reliable sources.
- The device must be fully charged.
Then you will need to download several files and programs that are needed for flashing:
- Odin program, preferably the latest version.
- Drivers for PC. They can be downloaded from the official Samsung website.
- The file itself with the "ask".
All software, except for drivers, it is desirable to put in one folder. After that, you can proceed.
- We temporarily disable the antivirus, which may interfere with the firmware of the Samsung Galaxy Note 2/3/4.
- We install drivers, Odin, unpack "I ask".
- Turn off the gadget.
- : Home, Power, and Volume down button.
- After a warning appears, then click "Volume +".
- Launch on the computer "One".
- We press "PDA", we select a file with the unpacked "past".
- We connect the device to the PC via cable. After that, ID: COM should turn blue.
- Click.
- After rebooting the gadget, you can disconnect it from the PC.
So we are. The instruction is suitable for firmware Samsung Galaxy Note N8000, as well as for any other devices of the “Note” line.
Chinese N8000
IN lately appeared in the country a large number of fakes that prevent their owners from living quietly. Tablets both externally and internally differ from the flagship of Samsung, however, unaware people still buy them, for which they doom themselves to long torments. 
How to flash chinese tablet Samsung Galaxy Note N8000? Everything is done exactly the same as described in the “Flashing” section of this article. The main problem is that the firmware for fake software is quite difficult to find, but the domestic masters still tried and found a solution. It is best to download this firmware: MaPan_MX913_DC_Jelly_Bean_4.2_Os_Root_Firmware_J20131101. The algorithm remains the same. It should only be understood that you are dealing with a fake, so the likelihood that everything will work as it should is very low.
It can be concluded that samsung firmware Galaxy Note 4 or any other gadget from this line is quite an easy task, however, it requires careful and responsible attitude. Do not buy fakes, but before installing updates, look on the Web for a high-quality version of the update.
Firmware samsung tablet galaxy Note or Samsung n8000 is necessary in order to update the version operating system tablet to a newer one. At the moment, each owner of such a tablet is available to update the operating android systems to version 4. 4. 2. In this article we will look at how to flash Samsung n8000, and also pay attention to the nuances of the procedure.
Samsung n8000 firmware
Before you start flashing the tablet, make sure that all applications are disabled.
- It is recommended to remove the microSD Card. This is necessary in order to protect the data stored on the card. Now you need to go to the "Settings" menu and select "Software Update". The system will prompt you to upgrade your tablet to android version Kitkat.
- The system will notify you of updates that will be accepted. Be careful, as you have the right to choose all the updates you want to install. Accepted updates can no longer be rolled back.
- Having selected all the necessary updates, click the "Update" button. The system will start an automatic update, which usually takes about 5 minutes. Upon completion of the update, the system will automatically restart the tablet and will optimize all changes.
After all the changes take effect, you can use the tablet. All the above instructions are also valid for the Chinese version of the tablet. We recommend that you use only this instruction for firmware, since the versions of updates that are on the network can harm the device.
Samsung Galaxy Note 10.1 - one of the most sought after tablets. For this reason, there may be a sufficient number of users who wish to use the full potential of their device. To do this, you need to perform several custom operations that will open access to the internal system of the tablet and allow more control over it. Today we will talk about one of them, and this is getting root access. Having studied this step-by-step guide, you can easily perform the above operation for Galaxy Note 10.1 with model number N8000, N8010, N8013 or N8020using CF-Auto-Root.
Why do you need root access? With him yours Galaxy Note 10.1 lose the factory restrictions, this will allow you to get to some previously inaccessible files and the process, as a result of which you will receive a large number of settings and improvements, you can install different applications, firmware, recovery tools, change user interface and much more. Getting root access It is not an official procedure, so you should be careful and use the manual only for the respective models.
As with all informal procedures, you should start by creating backups. For getting root access on the Note 10.1 you will use CF-Auto-Root and, so no data loss is expected, but it is necessary to be safe. So take care of settings, text messages, contacts, applications, call lists.
Do not forget that getting root access will result in loss of warranty, which can be restored by restoring factory restrictions. To do this, you will have to return to stock ROM or install official updates. Do not forget about caution and be careful, because all responsibility for your Note 10.1 lies solely on your own shoulders.
Now let's take a closer look at the entire preparatory phase.
- This manual is only suitable for Samsung Galaxy Note 10.1 with model numbers N8000, N8010, N8013 or N8020. Do not try to apply it to any other devices.
- Remember about the loss of warranty and do not forget to backup.
- For the operation, in addition to your tablet, you will also need Windows PC and USB cable.
- The following tools will need to be downloaded to the computer.
- Also do not forget about security programs, as they can interfere with the process described in this post. Disable them both on the PC and on the tablet.
- Charge up Galaxy Note 10.1.
- Turn on the USB debugging option on the tablet: Settings -\u003e Developer Options -\u003e USB Debugging.
That's all. You can proceed to receive root access.
Get root access for N8000, N8010, N8013 and N8020 with CF-Auto-Root
- Set the necessary forNote 10.1 drivers on the pc. This can help you. KIES.
- Download root file: for N8000for N8010for N8013for N8020.
- Also do not forget about Odin.
- Unpack root file and Odin.
- By setting Odinopen the program.
- Turn off the tablet and run it indownload mode.
- To do this, press and hold the following buttons: Volume Down and Power.
- Now that the tablet is indownload modeconnect it to the computer using a USB cable.
- If everything is fine, thenOdin will display a message with the text "added".
- Also ID: COM section should be yellow, if not, then you need to reinstall the driver.
- IN Odin e select the "PDA" option.
- Select root file, do not make any other changes (the re-partition option should be disabled).
- Click on "start" to start the operation.
- If everything went fine, thenOdin will display a message with the text "pass".
- Then you can disconnect your device from the PC.
That's all. Enjoy your use!
