This process is not particularly problematic if old phone is in working condition, but in most cases new phone They buy after an unsuccessful meeting with the asphalt of the previous device. What to do if vital information is left in the old phone and it is inoperative?
For smartphones on android based there is a possibility reserve copy data and its synchronization with a Google account. “This should not be neglected. Keep your address book linked to Google and let your phone automatically upload your photos to cloud storage, and then you can access personal data from any device, "said Evgeny Ikonnikov, an expert at Fly.
Step 6: Test the display and front camera
Now check the correct function of the new display. Press the standby key and check the display. In addition, open the camera application and check the function of the front camera and its proximity and brightness sensors. The small metal plate should now be reassembled above the plug-in connections. To do this, he first joins, and then screwed on. It is a good idea to turn on one of the magnetic screws to attach the plate a little. Then the other two may follow. A little harder with a non-magnetic screw on the outer edge - this should be placed with tweezers first in the hole and then tightened.
We bring to your attention several ways that allow you to download the necessary data from a half-living device.
Via the system menu
User information can be backed up through the advanced launch mode. To get started, put a microSD card with a capacity of more than internal memory phone. Then turn on the device while holding down the power and volume up buttons. You will be taken to the phone’s system menu, which is controlled using the buttons on the case without a touchscreen.
In this case, it is also necessary to ensure that the display is at the right angle to the housing, as otherwise the lowest connection of the plug may dissolve again. Once the plate is mounted, you can start pushing the display back into the frame of the phone. It should be noted that the metal frame screwed to the screen snapped into place and the display was completely pressed without protruding edges - otherwise, the two screws next to the charging socket cannot be screwed in.
Especially in cases where the frame received a small dent as a result of a fall, it takes a lot of finger sensations to accurately insert a new display into the body. Once this is achieved, just tighten the last two screws and the display exchange is complete.
Select menu System recovery, in it is the backup user data item. This will start the process of copying the backup to the memory card. When the process is completed, move the card to the computer and find the folder with the backup extension, which is unpacked using 7zip, WinRAR or Advanced Backup Manager archivers. Next you will see folders repeating file system Android and db database format files that open with Microsoft Access.
Conclusion: display sharing is usually simple but time-consuming
Self-assembly of the new display is a favorable alternative to the many offers of mobile phone doctors, a change by the manufacturer or even the purchase of a new device. Even inexperienced amateurs can easily exchange a pre-assembled display. But only when the frame already has several deformations due to the fall, does it take patience and time - also because of the partial, but rather complicated delicate work. Thus, the exchange time from ten to fifteen minutes, distributed in many “how” videos, is very careful.
Through the file manager on the computer
This path is suitable for users on whose phone USB debugging is enabled.
Download from the developer's site and install the MyPhoneExplorer application on your computer, which allows you to control your phone with personal computer, including working with the file system.
Use the USB cable to connect your smartphone to the computer in the “Charging only” mode. When connecting via cord mobile app It is installed on the smartphone automatically, without confirmation via the touchscreen. Press F1 to synchronize the computer with the phone, then copy the contents mobile device on computer.
For this you need to schedule at least one hour. The shading of a non-pre-assembled new screen should be left, but rather by a professional. Since converting the home button as well as the front camera, including all metal contacts to the new display, hides too many dangers for beginners.
To restore contacts from your broken phone, you can count on the help of your computer. It may happen that even if the smartphone is connected to the computer, we cannot find the contacts we need. Do not worry, there are many very useful programs to solve these problems.
Via OTG cable
You can return control to a smartphone with a non-working touchscreen if you connect a mouse to it through an OTG cable, most modern devices support this function. After that, in your hands are all the opportunities to extract the necessary data.
Sync your address book with google account, and you will have access to it from any device. Download special applications for backup SMS messages and call logs (SMS Backup & Restore, Call Log Backup & Restore). Transfer your photos, system settings, playlists and location of shortcuts to the screen to the archive on the SD card thanks to the MyBackup Pro application.
% of successful data recovery cases
You can download a free trial version for restoring contacts. The software then recognizes it and connects quickly. Also, try using the cable from the original manufacturer instead of a third party. Select file types.
Problem with firmware
This is a feature designed exclusively for damaged devices. Select the types of data you want to receive. In this case, these will be contacts. The device is turned on, but the screen is black and does not respond when we touch it. This is one of the most common cases. The market is full of various brands and models of smartphones. Each of them has its own mechanism of work in terms of restoring contacts.
If your phone is broken, and all the important information (phone book numbers, SMS messages, notes) was stored in the device’s memory, do not worry - you can restore this data even if the phone does not turn on. There can be two reasons for a smartphone to fail: a software failure or a hardware malfunction of the device. Each case needs to be considered individually, often preliminary diagnostics are needed to say for sure whether the contacts of the address book can be pulled out or not. So, more on the different options later in the article.
Check your model to avoid damage in case of failure. When you enter boot mode, the recovery package automatically downloads. Just click on the Contact category to start scanning. Now you can view all the contacts found, mark the ones you need and click “Restore” to immediately restore them to your computer.
On the other hand, during recovery, the battery should be more than 20%. Now you can enjoy the success of contact recovery. Do you have another trick to recover data from a broken smartphone when the screen is broken or not turned on? If you copied data on your mobile phone that will not bother. All you need to do is restore them from backup. But if you never made a copy, you need to turn to third-party programs to return the data.
First, check the synchronization of the phone with the cloud
When connected to the Internet, modern phones are synchronized with an account by default (I hope you use this feature!). If your phone (or tablet) has stopped turning on, the first thing to do is check what data has been synchronized. Perhaps you have everything stored in the cloud and there’s no need to contact a service center. How to do it:
Guide to recover deleted photos from black screen phones
You will see a window like the following. You can mark “Gallery” or just click “Select All”. If the screen is completely black, select the type of black screen. Then you need to confirm the model and your name cell phone. Please select a model correctly. Note.
To enter boot mode, follow the instructions. Press and hold the volume down buttons. Press the volume button to enter shock mode. Extract photos from mobile phone using the black screen. The program will analyze your device by downloading the recovery package. After a few minutes, the scan result will appear and click “Gallery” to view the photos. Select the photos you want to receive and click the “Restore” button and wait patiently.
If you have an Android smartphone:
Go to the browser on the laptop in your mailbox Gmail (which was login in Play market on the phone). In the upper left corner there is a switch Gmail-Contacts-Tasks. Select "Contacts" and check if there are any recipients in the list.
If you have an iPhone
On your computer, open a browser and go to iCloud.com. Enter your login (mail) and password from your account iCloud, which was used on the iPhone or iPad to access App store. Check if all the necessary information is in place.
Accidents occur every day, and prevention is always necessary. Then create backups important data stored on your phone. If you do not know how to do this, you can also use our product. With a full repair, we know this well, because every phone that we repair has a history. The liquid may fall onto it, jump off the table or leave our pockets unexpectedly head on the ground. Repairing broken screens is one of our specialties, and we can proudly display them in our display case as a guarantee of our work.
If there is no synchronization ...
Here it all depends on what kind of phone you have and what happened to it. The most popular cases in which you can recover information from a smartphone or tablet:
1. The display does not show or the sensor does not work
This is a problem for all touch phones when the device crashes and appears. If the display is damaged, the picture is not visible. Blindly getting to the phone’s memory is unlikely to succeed. Or another version of the problem when the sensor stopped working. With a non-working screen, the phone can neither be connected to the laptop to download information, nor can it synchronize.
Plop into the water
When one of these crashes occurs, we often regret not confirming our data. Fortunately, in this article we will offer you a guide so that you can restore the contents of your smartphone depending on your operating systemeven if your screen has become unusable.
Convert and restore
We need to make sure the screen is unlocked before proceeding with data extraction. If the screen is so damaged that you cannot correctly determine if it is locked or not, this article can help. After that, follow these simple steps.
There are two options (applicable to iPhone and Android devices):
- Make device repair and change the screen. This is if you want to continue to use the phone further. The cost will depend on the model of the smartphone and the quality of the installed parts. Check with the master.
- Substitute the working display and save all the important information. After that, return the screen to the warehouse, and do not repair the phone. This option will be appropriate if the device is old and changing the screen on it is simply unprofitable. Only the phone book, photo and other info from the device’s memory is important. The cost for this procedure will be 300-450 UAH, depending on the complexity of disassembling the device to substitute the working screen.
2. The phone does not turn on
There are a lot of options, because the phone may not turn on for various reasons. Will it be possible to subtract information can be said only after diagnosis. What options can be:
Step 3: Copy the data you want to receive from the phone to a folder on your computer. After unlocking the screen, do the following: Another option is to click on the device button and go to the Summary tab and select Restore Copy. As always, the best advice we can give you is prevention. Ask us for advice and we will offer you the best option for your phone! If you think this article may be useful to someone else, you can share it through social buttons.
Most people who have a smartphone can relate to situations where the screen is cracked or water has leaked into the device and damaged the device. All contacts, messages, applications and other items stored in the memory of a mobile device, as you can on the moon. This means that you can recover many different files, for example, but not limited to the following. Phone on your computer, you will need to fulfill the following requirements.
Water got into the phone
The phone has stopped charging
Naturally, the battery is dead and the smartphone does not turn on now. Well, if the battery is removable and it can be charged separately on the "toad". But in case the battery is built-in, you need to contact the repair. There are several options that may be here: the problem with the charging socket, with the battery itself, the power controller, and more. The simplest case is to charge the battery from the power supply and turn on the phone to save data.
The recovery process is quite simple than Dr. The following is a step-by-step process. You want to select “Data Retrieval”. Click "Start" at the bottom of the page. The second is the Broken Black Screen. As soon as you choose the most suitable for the device, click "Next". Then click the “Next” button. Phone so that the device is in boot mode.
What memory block do we need?
Turning off the smartphone Press and hold the Volume, Power, and Home buttons. Press the Volume button, and then enter the boot mode. . Select the one you want to listen to, and then select them for the recovery process. Thus, you can save all the necessary data from the device. Even if your smartphone is beautiful today, having this software on your computer will give you a little peace of mind knowing that you can quickly get data in case the worst happens.
Problem with firmware
Important! No not like this. MAGAZINE! Do not try flashing the phone or resetting to factory settings! This will delete all information from the device’s memory and it will be impossible to restore it. In the case of software glitches, there is only one way out - to unsolder the flash memory and read on the programmer. More on this in the next paragraph:
Recovering data from the phone through the program
Preview: you can check the data before recovery to make sure that this is what you want to save on your damaged device. Make sure that the data you retrieve is sent directly to your computer so that it is safe and does not leak onto the Internet. Software free for 30 days, which means that you can use it on your phone without paying a dime for a month.
Since smartphones have become such a natural extension of our lives, and we take these devices wherever we go, even to sleep, we sometimes run the risk of causing accidental damage, such as cracked screens. The chances of increased damage increase if your phone does not have a protective cap, but designer purists claim that these coatings destroy the natural feeling of the device as they were intended. Add more risks if you have children, especially younger ones, who like to throw things, and your chances of a broken device increase dramatically.
99% successful data recovery cases
The most expensive but the most effective way. It consists in the physical desoldering of a flash memory chip. This chip just stores all the information: both the firmware and your personal data. You can subtract everything: phone book, SMS messages, notes, calendars, photos. But provided that microcircuit is not damaged! The state of the phone itself is indifferent. Whether it is drowned in the sea, moved by a car or even broken in half. The cost of such a procedure from 600 UAHdepends on the phone model.
So, if you get a cracked screen, here are five different repair options that might work for you. Did the broken display get a fix? Extended warranties from the manufacturer or store selling the smartphone. Some smartphone manufacturers and stores offer extended warranty options for your device. But this is what you should buy with your smartphone, and not after it is already broken. Full extended warranties cover incidental damage, the cost of which is less than 5% of the total cost of the smartphone and, of course, less than the cost of changing the screen.
In a nutshell, how to do it. We solder the flash memory chip. We put the memory chip in the programmer. Program download memory dump and decrypt necessary information. The process of this method of data recovery in pictures:
Note! This method only works for Android phones and tablets. If you have an iPhone or iPad, you won’t be able to subtract data from them using this method. All information on iOS is encrypted.
If you have an old push-button telephone
The phone does not turn on or, or simply does not display phone numbers in the contact list. In such a situation, the probability of recovering important information is almost 100%, the main condition is never flash the phone or update its software.otherwise, all data will be lost forever. The principle of data extraction is to read the phone firmware file and then decrypt it using special programs.
At the moment, recovery telephone numbers possible on the following phones:
- Nokia - all models on the Symbian platform, as well as older models of the Dct-3 and Dct-4 versions. To do this, it is necessary to read the pm-file of the firmware using a programmer (for example, UFS or JAF);
- Sony Ericsson - we read the GDFS file using the Setool programmer or another method via the USB interface;
- Samsung - it is necessary to read either the firmware completely (merge full), or only the eeprom part, depending on the model and method of connecting to the computer, usually this can be done through uSB cable, but easier and faster through the programmer;
- Motorola - CG2 code group is read from the phone using FlashBackup or any other program;
- LG - retrieves the full firmware file with the extension * .bin.
After we have in our hands the necessary file, read from the phone, we should decrypt it and extract the necessary information. We recommend using the programs ReadContact, ReadCV, vCardOrganizer, PMtoBook. The data can be saved in different formats, for example, an Excel table, a comma-delimited file, vCard, it all depends on how you plan to use the extracted data, copy it back to your phone, or simply print it.
To summarize
In the event of a hardware malfunction, there are many possible solutions, but the result depends on the cause of the phone’s inoperability. If the phone cannot be synchronized with the computer due to damage to the display, a broken sensor, damage to the cable or the sync connector, you must replace these elements.
In any case, it is best to first contact the master and discuss with him the possibility of restoring the necessary information from your phone. You can ask a question in the comments to the article or on our website.
Schedule:
Mon-Fri: 11 a.m. - 7 p.m.
Sat-Sun: weekend
