Today at two in the morning I got a call from someone familiar with the question of how to use Android 6.0 to reset the settings to factory settings.
I was not surprised, because I knew that he practically lives in his samsung smartphone galaxy.
He is not the only one. I can judge this by letters where they ask how to return, restore, throw, make, install, switch, roll back, put, reset, reset, reboot, bring down, configure, clean, update, demolish, throw and even format to factory settings
Whether this is due to some insoluble problem, install a major new update ahead of time or even sell or transfer the device to someone else. Be that as it may, many people are not sure how to do it right or how to prepare for everything that is done safely and without losing your data, files and information.
Why reset? Causes
If you have few problems with this, we will show you how this backup can be done in a few steps below. To get started, go to "Settings" and you will see several different options. You must look for the option “ Backup and reboot ”, which should be lower on the screen.
Of course, not everyone does not let their mobile devices out of their hands - they eat and sleep with them. Many just want to sell their device, and before that, completely clear everything.
In order not to repeat the same thing each time, but simply to throw a link, so I decided to jot down a few words.
NOTE: phone, tablet or smartphone Samsung, Lenovo, asus, htc, lg (lji), fly (fly), alkatel, dexp, micromax, explay, sony (sony) xperia, zte, as well as android 6, 5.1, 4.4, 4.4 2.4.1 2, 2.3, 2.1 may have some of their chips.
This procedure will not be as thorough, but it should be enough for many users. With your backup, it's time to actually restore your device to the factory. To do this, click “Original Setup” on the same screen as the backup and reset.
This may take several minutes, and your device may restart itself several times. At the end of the process, your device will be completely clean, for example, on the day you first purchased it. Any problem you encounter will disappear, do not forget to transfer it to another person, if so.
Reset Android devices to factory defaults
Resetting data on Android includes the following: delete all data and applications on a smartphone or tablet with Android. This includes self-installed applications and personal files, such as photos taken with this device, music stored on it, etc.
In the end, get the device as new. Then at the first start, the setup wizard will open, as if it new phone - just bought in a store.
Reset Android service codes
Therefore, do not forget to leave your comments telling us if our textbook worked correctly or if they have any doubts about the process! Your phone is full or it takes too much time to open the application, it may be time to restore the factory default settings. When we restore the factory default settings, all data on your phone will be deleted, i.e. Your phone will have the settings that you had when you purchased it.
Step 1 - On your device, go to the options menu and select the “Settings” option. Step 2 - Then tap “Backup and Reboot”. Step 3 - At the end, find “Restore Factory Data”. Step 4 - On the next screen, click Restore Phone.
Reset settings on a smartphone or tablet with Android 5 Lollipop
Open the settings on the device and find the option called “Backup and reset”. Click on it.
If you have nothing against, click - “Reset device”. Piglets will confirm that you agree to start the reset process.
You will then be asked to enter the displayed code number. Enter it and click the "Delete All" button.
How to restore android after reset
Step 5 - Finally, if you are sure you want to restore initial settings, click Erase All. This guide describes how to delete user settings made by the user. Hope you helped this article. If it helped you share! Perhaps this will be useful for your friends.
Any questions leave a comment. In this advice, what are these two methods and how to proceed. You must start with the device turned off, that is, simultaneously press and hold the “Power” buttons of the main volume level. When your device vibrates, release the power button while holding the rest.
Once you do this, your device will reboot and Android 5 Lollipop will delete all your data, accounts and installed applications.
In addition, it will restore the settings. operating system default. Next, the first time you run the setup wizard, you will need to configure everything from scratch, as if it new smartphone or tablet.
NOTE: no images are provided, since I have Android 6.1 and 7 installed now - I don’t want to lead anyone astray.
How to reset the settings menu
Decide whether to cancel auto recovery and backup. my data. When you encounter a serious problem on your phone or it starts to perform tasks more slowly, there is a possible solution: restore the factory settings. In principle, this all goes back to how it was when you bought your smartphone and turned it on without changing anything.
However, it is important to remember that this procedure completely deletes your data, so you lose all your personal information. If you are in the process of selling a device, make sure that some data can be recovered. Therefore, as a precaution, additional cleaning of the phone may be required.
How to reset a smartphone or tablet with android 6.1
If you have a smartphone or tablet with android 6, here's what you need to do to reset it to factory settings. Open Settings.
There, find and click on the line "Backup and Reset".
Please note that the current operating system remains even if you return to the factory settings. So you cannot go back to more old version system by doing this. Swipe to the top of the screen and tap the Settings icon or open the application menu and click the gear icon. Then go to the menu until you see the option “Backup and reset”. . The “Restore Factory Settings” option will appear.
A message appears stating that your data, accounts and settings will be deleted from your phone. To start the process, just click "Restore Phone". To return to the factory settings, follow these steps: Open the system settings on the main screen. On the Settings screen, highlight the General option and tap it.
Now, after scrolling to the bottom, you will see two parameters - reset and data reset.
What they mean I will not describe. The first item will restore all settings to the factory settings, and the second will delete all your data.
NOTE: if you select the second item, only the contents of the internal memory will be deleted, but what remains on the memory card will remain.
On the next screen that opens, find the “Reset” option. There are several alternatives for you. Important: Restoring factory settings deletes all data from the device. Therefore, before doing this to solve the problem, we recommend that you try other solutions first.
Preparing to restore factory configuration
Reset the device to factory settings.
My friends advised me to reset them to a dump factory to solve these problems. Factory discharges should be used with care. Factory discharge is full recovery An electronic device, such as a telephone, at factory settings. Usually people do this when your phone is not working, because many problems, such as freezing, can be solved by performing a factory reset. It also deletes all data from internal memory devices and restores factory settings.In both cases, you will be asked to confirm your actions - it is normal to start the process.
Remember - this is your last chance to leave everything as it is. If you want to reset, click the "Delete All" button.
Once you do this, your Android device it will reboot and all data, accounts will be deleted, installed applications and restore the default OS configuration.
Using the recovery menu
Since a factory reboot wipes out all the data stored on the phone, so this should be used with caution. Then click the “Start” button so that the program recognizes and connects the device. After connecting the phone software quickly scans the device to find all existing and lost data. You can easily find lost filesyou want to select the correct file types.
Why reset Android and in what cases is it needed
Preview all recoverable files one by one, and then select the ones you want quickly. Select the "Only display deleted items" list to display only deleted files. Finally, click the Recover button to receive the files. With the advent of technology, it has become increasingly common to replace your mobile phone or tablet with a higher frequency than in the past.
After the process is completed, the device will launch the wizard initial setupas if it's a new tablet or smartphone.
As you can see in this manual, resetting to the factory settings of an Android smartphone or tablet is quite easy, and what to do if the device does not turn on.
Many users experimenting bring their devices to a state where they no longer start. Then, in many cases, resetting also solves the problem.
Unfortunately not! Excluding elements that can jump into the eyes in the form of photographs or contacts, there is other information that would like not to bend in the earliest curious eyes of our terminals. Therefore, this short guide aims to provide you with the steps you need to take for the major operating systems on the market that are useful in returning your terminals to factory settings.
Always do this from the settings, go to the "Generals", "Restore", "Clear contents" and "Settings" section. In principle, in order to perform the recovery procedure, you need to enter your terminal settings and find the “Backup and Restore” tab.
How to reset to factory settings if the android does not turn on
If you cannot return to the “Factory settings” in the system settings, then try to use the “recovery mode” to throw the phone to the factory settings.
NOTE:
- Your steps may vary depending on the model of phone / smartphone / tablet.
- All data will be lost after a reboot.
- Before performing a reset, make sure that the battery level is above 15%, or connect the charger.
- After confirmation, the reset process will take about 4-8 minutes.
Depending on your Android device model, your first steps should be something like the following. When the phone is off, press and hold at the same time:
If you cannot find this option, you can try changing the view mode of the settings or try to search by name between the settings that can be accessed from the top menu bar. Find the “Backup and Restore” menu simply by clicking “Reset Factory Data”.
Restore initial settings through the gadget menu
After additional confirmation that you want to cancel everything, the phone or tablet in question will be restarted in the factory, ready for resale at the end of the procedure. Confirming the operation, at the end of the operation the phone will return to the factory settings with the confidence that all personal data has been completely deleted.
- start button and volume up button
- start button and volume down button
- start button, volume up button and the third one that you will find, but not the touch
- the start button and the volume down button and the third one that you will find, but not the touch
Now, moving through the menu (up / down) with the volume up / down buttons, select the line “wipe data / factory reset” and confirm with the start button.
Hard reset from device keyboard
A soft reset only restarts the device. It does not delete data, therefore it is safe and does no harm. Hold both Volume and Power Button simultaneously for about 15 seconds. The device should be turned off and restarted automatically. . Hard reset is an operation that returns the device to the factory default settings. You can use a hard reset if, for example, you forget the password of your tablet. But be careful that during this operation the data will be deleted, so before restoring do not forget to do backup.
Then the window will change and in it confirm your choice by clicking on the line “Yes - delete all user data”.
The process of zeroing will begin. When the rollback is complete, select “reboot system now”
Set device protection
Steps to perform a hard reset. With the device turned off, hold the Volume Up and Power Button buttons.
- When the menu appears, release both buttons.
- Press the ignition button to confirm your selection.
Restore Android factory settings in the engineering menu of Recovery
If you need to reset the device to factory settings. For security reasons, you cannot use the profile to configure the device after a reset if this password has been changed in the last 24 hours. If you are looking for a new mobile device and plan to sell your old smartphone, you should think about security and delete all the important information from your phone properly.
As mentioned above, your main task is to enter recovery mode. To do this, you can experiment (there are not so many options - about four).
You can search for information on the network or just read the manual that comes with the phone when you purchase.
The quickest solution is to reset the smartphone to the factory settings and, possibly, format the memory card. If you leave a memory card, remove it from this point from your mobile deviceto prevent unwanted data loss. Before you get rid of your phone completely, you can back up your saved data. These include music, photos, contacts, and possibly text and multimedia messages. To do this, it is best to use software tools provided by individual manufacturers.
To describe the options for each android device - I would have to write a lot - because there are darkness of phones, smartphones, tablets with the Android OS. Successes.
If in the process of using your smartphone or tablet computer based on the operating android systems, you began to notice obvious malfunctions in his work, do not get excited and rush headlong to the service center.
If you have automatic synchronization enabled, you can check the settings in the section Accounts and synchronization. Here, click the "Factory Reset" button and confirm the phone reset. If you cannot use the “Factory default settings” parameter in the “System settings”, you can use the “restore” function to restore the phone to factory settings. To restore the factory settings, refer to the examples below.
We make hard reset programmatically
Stages of execution hardware reset may vary by model. After a reset, all data on your phone will be lost. Before starting a reset, make sure the battery is above 15% or connect the charger to the factory reset. Once confirmation is confirmed, the process will take approximately 4-8 minutes before the setup screen appears.
Perhaps you should reset all current settings, and the problem of optimal functioning will disappear by itself. But, it is worth remembering that the system can roll back its parameters to the factory settings, which automatically means the complete destruction of all files downloaded to internal memory mobile gadget, except those stored on the built-in flash drive.
And here the question arises - how to independently and most importantly correctly reset the settings on Android? And why even apply this procedure?
It should be understood that a full rollback of user settings to factory settings is mainly used if the tablet / smartphone has stopped working stably, or its use has become not as comfortable as it was before.
Next, we will study in detail the methods by which you can safely return the Android device to factory settings. By the way, before starting the operation, you should back up the data that is important to the user.
We carry out Hard Reset for Android device
First, consider the implementation procedure software reset, which consists of the following actions:
- Click on the button Erase Everything and the Android gadget rolls back its parameters to factory settings;
Go to the menu "Settings » « Backup and reset » « Reset Settings »;
When you click on the appropriate checkmark, a warning pops up that all system data will be deleted;
You can also try full reset system parameters using special code.
To perform this operation, you need to open the layout for entering numbers and dial the following order of numbers - *2767*38855# .
After dialing, the system will automatically perform a Reset. It is worth noting that additional confirmation for the implementation of this feature from the user is not required.
Reset system settings with Wipe
There are situations when the smartphone does not react at all or any manipulations with its system. In this case, you must simultaneously hold down the buttons while turning off the device "Turning on" - “Volume Down” and "Home".
Keystrokes must be held until the process starts Recovery mode. Next, check the box. "Wipe" and button "Home" confirm the operation.
In conclusion, it is worth noting that if “alternative” firmware is installed inside the system of your device, the “HR” execution procedure will not affect those components that are installed by the additional firmware system.
In other words, when you perform “HR”, you will not be able to roll back all the applications of your Android gadget from alternative to factory settings.
If our article helped you bring your device back to life, put it below the likes and let your friends know about it!
