ZTE Blade L3 hard reset is performed in cases if you forget graphic key, there were system errors in the smartphone, or you need to remove the virus.
The ZTE Blade L3 hard reset method is not suitable for everyone, since during its execution the internal memory is completely cleared mobile device. However, if you have no other choice, then this method will be very useful.
As we already said, hard reset erases all personal data from the smartphone, so you need to save important files to safe place. You can copy photos, contacts and more to microSD card memory or computer and also create backup data.
Now we proceed directly to the stages of the ZTE Blade L3 hard reset.
First, recall more quick way restore factory settings on the ZTE Blade L3. If you forgot your smartphone password or the device does not turn on, then you cannot use this method. In other cases, this is the most convenient way.
You need to open the menu Settingsgo to section Recovery and Resetthen click on Reset.
Thus, you will return the factory settings on the smartphone ZTE Blade L3.
If this method does not suit you, then use the following:
ZTE Blade L3 hard reset: manual
The smartphone will automatically restart. After it turns on, you will see that the graphic key is no longer installed on the device, as well as software errors are fixed. The phone is completely clean, which means that the ZTE Blade L3 hard reset is successfully completed.
Function execution Hard reset involves a complete reset of all settings and return the phone to its "virgin" state. Those. after a reboot, all data (contacts, programs, messages, etc.) will be permanently deleted, and the phone will be returned to its factory settings. In this case, the data stored on the memory card and on the SIM card is not deleted.
Before performing for ZTE Skate Hard Reset, must be done backup data.
There are several ways. run hard Reset
Method 1 Hard Reset ZTE Skate
The easiest way is to press "Home" - "Settings" - "Privacy" - "Factory data reset" - "Reset phone" - "Erase everything ”(Erase everything). Unfortunately, if any system errors this method is not always possible to use.
Method 2
You need to turn on the phone without a SIM card. Choose " Emergency call”(Emergency call), then dial: * 983 * 987 # - confirm“ Erase everything ”(Erase everything). After reboot, the initial settings will be restored. This method Fits most ZTE models.
Method 3
Run on ZTE Skate hard Reset is also possible using CWM Recovery. Download CWM (press "Home" + "Up" + "On" and hold for 2-3 seconds) - select "wipe data / factory reset"- confirm with the" back "button, select" Yes - delete all data ", then confirm the deletion again. After a reboot, the data and cache sections in the phone’s internal memory will be cleared. Also, the entire contents of the android_secure system folder on the memory card and the sd-ext section will be deleted.
As for data backup, there are also several options here. Sometimes it’s not necessary to use special programsto recover data. It is enough to check the box next to the item "data backup" in the privacy settings, and you need to have an active Internet connection. All information will be stored on the Google server. You can restore contacts, letters by synchronizing the phone with your Google accounts. Applications can be restored using the Google Market. We go to the Google market - click on the “menu” - select “my applications” - click on the “everything” tab - download the necessary applications.
You can also make a backup by downloading CWM Recovery. Open "backup & restore" - "backup" - confirm. After creating the copy, exit using the reboot system now item (reboot). After the procedure, a file with saved data will appear on the SD card. If there was a desire to rename it, then Russian characters, as well as spaces in the name should not be.
Restoring from a backup is also not difficult. We load CWM - we select "Backup & restore" - "restore" - we select a backup copy - we confirm - we leave by means of "Reboot system now".
Execution example Hard Reset on ZTE Skate can be seen in this video.
Often, a technique fails. Most often, the reason lies not in the hardware, but in the device’s system itself. The reasons for this can be completely different: accidental deletion system filesvirus infection or frequently occurring critical errors.
In order not to reflash the phone’s operating system, you can use the so-called Hard Reset or reset to factory settings. After that, all damaged or lost files will be restored.
Each phone is initially embedded software that makes it possible to roll back user settings to their original appearance. At the same time, be prepared that all data will be deleted from your ZTE phone: photos, videos, audio and even contacts (if they are stored in the phone’s memory). The data stored on the SIM card and built-in memory card will remain untouched.
Therefore, do not forget to back up the information stored on the phone. This can be done both from the device itself and by connecting it to a computer.
Unlike flashing, resetting the ZTE router is completely safe and will not be considered a hack softwareif you suddenly decide to return the defective device under warranty.
There are several ways to reset your phone to factory settings. Depending on what is the reason for your decision: a malfunction in ZTE or as a preventative measure, this or that method may not work. Consider the most popular.
Android System Recovery
Any ZTE phone running on operating system Android can be returned to initial settings using the universal way. To do this, the device’s battery must be at least 30% charged. After that, do the following:
- turn off the power of your device;
- hold the following key combination at the same time: on / off, increase volume;
- a screen with an Android icon will appear, a list of available commands, information about your ZTE phone (firmware version);
- the list is controlled by the volume down and increase keys, confirm the selection - power button;
- go down the list and select “wipe data / factory reset” - a full reset to the factory settings;
- confirm the action, wait for the operation to complete;
- select the first line from the "reboot system now" list.
After that, the phone will reboot, and all parameters will be reset to the factory settings.
Telephone code
If the previous method did not work or there is no recovery in the phone for some reason (this may be due to a virus or installing root rights), then use the following reset method to the ZTE factory settings:
- remove the SIM card from the device (if you have one);
- then start the dialing window and press “emergency call”;
- enter the following command: * 983 * 987 #;
- after that, the device will ask you for permission to completely delete the data (erase everything);
- confirm your intentions and wait for the operation to complete.
Clockworkmod
For this method requires a third-party utility to restore phone data to factory settings - ClockworkMod Recovery. It is distributed absolutely free of charge, and you can download it from the official app store for android.
In its functional features ClockworkMod Recovery is similar to the built-in Android system Recovery, but has several advantages. For example, the ability to back up data to an SD card and run the firmware distribution in safe mode.
After installation, it automatically basic recovery software and starts in the same way: using the volume up keys and turn on / off the phone's power.
Standard System Restore
This method is only suitable if the device is working.
- go to the settings menu of your android;
- scroll through the list and find the line “reset and restore data”
- here two Hard Reset’s options will be available: reset and complete deletion of all DRM certificates;
- here you can configure data backup, for this you will need account Google
- after changing the necessary parameters select full recovery data and wait for the end of the procedure.
As you can see, resetting to factory settings is quite simple on any ZTE phone model. Most users will be helped by the very first method, as for more advanced ones, it is recommended to download a special third-party recovery application.
Found a typo? Select the text and press Ctrl + Enter
Most likely, you already know how to make a hard reset Android devices. However, problems may occur on the ZTE Blade L110 smartphone, namely the Chinese recovery menu.
The Chinese version of the ZTE Blade L110 smartphone has a Chinese recovery menu, and this can be confusing for many people. In this article we will look at how to make the ZTE Blade L110 reset the settings with the Chinese menu, and we will also recall how hard reset is performed on the international version of the mobile device with the English recovery menu.
Whatever the version of the ZTE Blade L110 smartphone, resetting completely clears internal memory devices. You should save important files before making a hard reset.
If you are ready, then move on to the walkthrough on resetting your ZTE Blade L110.
ZTE Blade L110 reset with Chinese menu
Let's start with the atypical method of hard reset - reset through the Chinese recovery mode.
That's all! The ZTE Blade L110 reset process has started. You can put the phone on the table and wait until the hard reset is completed. It takes a couple of minutes.
ZTE Blade L110 Hard Reset
If the first method does not help, then you can try the standard instructions for resetting any Android device.
All! ZTE Blade L110 settings reset! Do not be afraid of the Chinese recovery menu. The ZTE Blade L110 smartphone offers two ways to perform a hard reset. You can choose the one that suits you best.
