Dear forum users, this article contains information about mobile device. Here you can find and download latest firmware android on Huawei U8110, and you can also get root rights.
You can read more about root rights. Instructions for getting it are below.
In what cases it is necessary to update the firmware
- I want to install a new firmware to expand the capabilities of the smartphone;
- Recovering from an unsuccessful firmware is necessary
- The device constantly reboots for no reason;
- The smartphone does not turn on.
What firmware do we have
To download the firmware Android 8.0 Oreo, 7.1 Nougat, 6.0 Marshmallow, Android 5.1 Lollipop on Huawei U8110 read the full article - it's very important. By installing the latest available version of Android, you will be surprised by the new possibilities. And also you can find the official version of the MIUI firmware different versions and custom original firmware.
By leaving a review through the comment form, you help others to learn about the pros and cons of Huawei U8110 and make a purchasing decision.
Firmware available: In stock.
Download firmware
Leaving a review through the comment system, indicate a real email if you have problems installing the firmware. Please note that the site administration may not answer questions immediately, depending on the workload. In addition to the administration, they can answer and help you ordinary users, just like on the forum.
Instructions for installing firmware can be found at the links below. Firmware download for Huawei U8110 is available via torrent with instructions.
Firmware installation instructions
To download, select the firmware you need and click on the link.
To install, do the following:
- Download the file with firmware and special program
- Run the program on the computer
- You are taking desired version firmware
- Follow the instructions from the file archive
Video on firmware Huawei U8110
Official android firmware 2.1 [stock ROM file] -
Huawei custom firmware -
If custom or official firmware for Huawei has not yet been added here, then create a topic on the forum, in the section, our specialists will quickly and free of charge help, incl. with backup and manuals. Just do not forget to write a review about your smartphone - this is extremely important. Firmware for Huawei U8110 will also appear on this page. Please note that this Huawei model requires an individual ROM file, so you should not try firmware files from other devices.
What are custom firmware (firmware)?
- CM - CyanogenMod
- lineageOS
- paranoid android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK(MoKee)
- flymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and disadvantages of a smartphone from Huawei and how to fix them?
- If the U8110 does not turn on, for example, see White screen, hangs on the screen saver, or the notification indicator only blinks at all (possibly after charging).
- If it freezes when updating / freezes when turned on (requires flashing, 100%)
- Not charging (usually, hardware problems)
- Can't see sim card
- The camera does not work (for the most part, hardware problems)
- Sensor not working (depending on the situation)
Hard Reset for Huawei U8110
Instructions how to do hard reset on Huawei U8110 (factory reset). We recommend that you familiarize yourself with the visual guide, which is called on Android. . 
Reset codes (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Turn off the device-> go to Recovery
- "wipe data/factory reset"
- "yes - delete all user data" -> "Reboot System"
How to enter Recovery?
- hold and hold Vol (-) [volume down], or Vol (+) [volume up] and the power button (Power)
- a menu with the Android logo will appear. That's it, you are in Recovery!
Reset settings on Huawei U8110 can be done in a very simple way:
- Settings->Backup & Reset
- Reset settings (at the very bottom)
How to reset pattern
How to reset graphic key if you have forgotten it and now you cannot unlock your Huawei smartphone. On the U8110, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -
Firmware is a set of built-in software for a smartphone, tablet or other digital device necessary for its normal functioning. In the smartphone, their Huawei tablets mainly use firmware based on the operating Android systems various versions, as well as proprietary graphical shell Emotion UI.
How can I find out the current firmware version?
To be sure current version software, you need to go to Settings - About phone / About tablet - System update. The version is the three digits after the letter B.
For example, the build number V100R001C00B122 means that you have the 122nd firmware version installed. Any firmware with numbers greater than these is newer.
More about firmware versions:
So, let's take a look at the firmware numbering of Huawei smartphones. For example, take the firmware from Huawei Ascend Mate-MT1-U06 V100R001C00B907.
As you probably guessed, MT1-U06 is the name of the device. MT1 is the main base, that is, Huawei Mate, U06 is the revision of the device. Devices come in different revisions, in this post I will not go into details of their designation, I will only say that the letter U is UMTS (regular 3G), and the letter C is the CDMA version. Devices with revision MT1-U06 are delivered to Russia.
CxxBxxxSPxx - This is the most important option in the firmware, it shows on which version of the "base" the firmware is built. Bxxx - the numerical class of the base for the SPxx firmware - Service Pack number. The higher Bxxx and SPxx, the newer firmware. (Bxxx takes precedence over SPxx). Cxx is the region of the country.
Next, consider the firmware version itself - V100R001C00B907. V100 and R001 are the main firmware version and revision. They change in very rare cases, when there is a big change compared to previous version firmware (for example, moving from Android 2.x to 4.x). Even within android versions 4.x, these values usually do not change.
C00B907 - for most new devices, the value of C00 no longer changes, but in general it means binding to the region. Now the region can be defined in the menu item "Special version" - CUSTC10B907.
So, for smartphones, the region of Russia (channel / ru) is CUSTC10. The binding to the region is easily changed by a special firmware file, in some official firmware there is an update.app file in the cust folder weighing several megabytes or kilobytes, which changes the region to Russia.
B907 is the firmware version itself. I think there is no need to explain that the higher it is, the newer the firmware.
Where can I download the official firmware for my model?
Currently, most smartphones with original software without modified system files firmware comes with FOTA updates (Update "over the air"). If you have received root rights, or you have not yet received an update over the air, then you can download it yourself current version firmware from the official site and install it manually.
Official Russian firmware:
You can download the latest official Russian versions on the official consumer support website: http://consumer.huawei.com/ru/support/downloads/index.htm.
To search for the desired firmware, enter correct name models on English language, such as Honor 5X, or the service model number, such as KIW-L21.
The Russian firmware version has full localization, a full set of Google Apps services, as well as pre-installed regional applications such as Yandex search, Odnoklassniki, Vkontakte, etc.
Official European firmware:
You can download the latest versions of official global and European firmware from the official Emotion UI download site: http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=list , as well as by searching the consumer support portal: http://consumer.huawei.com/en/support/index.htm .
To search for firmware on the emui.huawei.com portal, you must specify the service model number of your smartphone or tablet, which can be found in Settings->About phone->Model.
Search on consumer.huawei.com supports full model name and service model name searches.
The official global firmware has support for all major world languages, including Russian, as well as a preinstalled set Google Apps Apps.
Official Chinese firmware:
You can download the latest version of the official Chinese firmware for your device on the official EMUI website: http://emui.huawei.com/cn/plugin.php?id=hwdownload , as well as using the support portal search: http://consumer.huawei.com/cn/support/index.htm .
After selecting the desired model in the list on the emui.huawei.com firmware portal, you will be taken to the model card, where the latest firmware version is presented. To download it, click on the turquoise button with a hieroglyph.
Note that by default, Chinese firmware absent Google services Apps, as well as Russian language in the system settings.
After downloading the firmware, use one of the manual installation methods described below.
Installing and updating the firmware
A local update always deletes user-supplied data and settings from the device's memory. Before you start updating the software with these methods,
we recommend doing backup all important data for you through the application for Reserve copy, as well as save another necessary information from the device memory (for example, to a memory card).
When updating online or FOTA, user data is saved. Despite this, we also recommend that you back up before doing this.
update.
Before starting the procedure, make sure that the battery of your device is at least 60% charged.
To connect Huawei smartphones and tablets to a PC, you need the HiSuite utility. Install it on your PC before starting the update.
Things to know before updating smartphone firmware:
- The firmware file must be named UPDATE.APP;
- During a local firmware update, all data on internal memory your smartphone will be deleted!
Attention! Everything that you do with your device - you do at your own peril and risk! Nobody guarantees correct work devices during and after installation of third-party firmware and / or other actions not provided by the manufacturer!
Local firmware update:
Local update is used if the innovations are large-scale, in addition, this method restores the system to its original form and in
in most cases eliminates the possibility of problems with increased battery consumption in the first days after the update.
- Copy the UPDATE.APP file from the firmware archive to the dload folder on the memory card.
- Go to the Settings-Storage-Software Update menu and start the upgrade process (Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade).
- Wait for the update process to finish.
Forced local update via 3 buttons:
This firmware update mode is an emergency and will work even if the device does not boot normally.
- Create a dload folder in the root directory of the SD card.
- Copy the UPDATE.APP file to the dload folder on the memory card.
- Turn off your smartphone.
- Hold down the Volume Up + Volume Down keys and turn on the smartphone, while the Volume Up + Volume Down keys should remain pressed for ~ 5 seconds after pressing the power button.
- Wait for the update process to complete.
Update over the air (FOTA):
For of this type updates, it is advisable to use a high-speed network connection, such as Wi-Fi.
- To update in this way, you need to go along the path to the Settings - About phone - System update section and select the "Online update" item.
- After that, the device will connect to the network and if the update is available, click the "Download" button. After clicking it, the update files will be downloaded, then it will appear
"Install" button. When you press it, the device will reboot, install the update and turn on normal mode. Update package files will be removed
from memory automatically.
Please note that if the device has received an elevation of rights (root), a recovery is installed that is different from the original one, and the system has also been modified with
using this elevation of rights, updating in this way will most likely end in an error and the phone will turn on in the usual way after rebooting.
mode.
Update with HiSuite:
- Download, install and update to latest version HiSuite program - a utility for synchronization, backup and much more from Huawei (contains ADB drivers).
- For further flashing the phone, enable USB debugging in the phone settings in the developer section.
- We launch the HiSuite program on the computer.
- Connecting the phone with USB cable in HiSuite mode.
- When connected for the first time, HiSuite starts installing drivers on the computer and the Daemon program on the phone. (A shortcut to the HiSuite program will appear on the phone - this tells us about the successful installation of the drivers).
- Select the EMUI ROM item in the HiSuite program.
- If we do NOT have a previously downloaded firmware version, then select the Download ROM item, follow the link and download the firmware version we need from the site.
If we HAVE, or you just downloaded it, the firmware version, then select the Loading ROM item, we will be prompted to select the location of the firmware file. Find the file and confirm the selection. - The file upload process begins.
- We are offered to save the phone data. We select the necessary backup points, if necessary, and confirm the choice. Or refuse, if we believe that we already have saved data. After saving or canceling, select NEXT.
- The HiSuite program starts the flashing process.
Important!
- During the firmware process, do not disconnect the cable from either the phone or the computer.
- Don't touch your phone at all.
- Do not switch to other processes on the computer.
- Wait for the end of the firmware.
- After flashing with HiSuite, the phone will reboot and enter Recovery mode. A message will appear on a white screen about the beginning of the firmware by the phone itself.
- We are waiting for the successful completion of the firmware in the form of a checkmark. The phone will reboot itself.
- We turn off the phone and see a window about updating applications on it. We are waiting for the end of the operation.
- We go into the settings and in the update point we are convinced of the version we have installed.
Possible errors during the update and how to fix them:
Q: When turned on with the volume buttons held down, the firmware process does not start.
A: Try to re-write the firmware file to the dload folder. If it still does not start, try starting the update process through the settings menu.
Q: The device turned off and does not turn on.
A: Wait a few minutes. If it doesn’t turn on, turn it on yourself, the process should continue normally.
Q: When updating, the process freezes at some point and does not go further.
A: Wait five to ten minutes. If the device continues to hang, remove and insert the battery. For devices with a non-removable battery, you need to press and hold (seconds 15) the power button and both volume buttons.
Tablet firmware update:
- Only FAT32 format cards can be used. Preferably less than 4 GB;
- The firmware must be on the SD card in the dload folder;
- You cannot use the built-in memory of the device (except for those devices where the Micro-SD slot is not provided);
- The firmware file should be called update.zip;
- During the firmware, the device will reboot several times - this is normal;
- If there are several folders in the archive with the firmware (step1, step 2, etc.), then flash all the files one by one.
In order to install any original firmware, you must do the following:
- Copy the dload folder with all its contents to the root of the SD card;
- Turn off the tablet;
- Insert the SD card if it has been removed;
- While holding the Volume Up key, press and hold the Power button until the screen blinks. The Volume Up button must be held until the installation process begins (a green robot appears and a progress bar fills up);
- At the end, when the corresponding prompt appears, remove the SD card or hold the Power button for 10 seconds.
Note: In some cases, you do not need to hold down the buttons at all and the process will start automatically after turning on / rebooting.
If the upgrade process does not start, you need to open the calculator, enter ()()2846579()()= and then select Project Menu Act -> Upgrade ->SD Card upgrade.
Attention!
- Do not pull out the card and do not press the power button until the process is completed and the appropriate prompt appears on the screen;
- If food is in progress installation will be lost, repeat the flashing process;
- After you copy the firmware to the sd card, check if it is damaged (copy the firmware files, disconnect and then connect the sd card, check that the *.zip files in the firmware open without errors on the computer).
- Delete the firmware file from the SD card or rename the dload folder if you don't want to accidentally update your tablet again!
Another operator phone that will appear in the light of the lamps of our sterile operating room, Huawei U8110, which is sold by Megafon in Russia, and Life in Ukraine and Belarus. Perhaps, we have not seen a more budgetary device in operator stores. Firstly, the phone screen is resistive, that is, multi-touch, fast response on the fingers is not present here. Secondly, the limited capabilities of a smartphone are extremely limited - a 528 MHz processor of an outdated architecture, 256 MB of RAM, a missing video accelerator ... In general, it is unpleasant to realize that a phone positioned in promotional materials as a business smartphone is never a business, nor in its original state - a full-fledged smartphone. main reason our bias - hardware capabilities "enhanced" by an ancient version operating system Android, 2.1. When someone dares to tell the top managers of operators what a smartphone is and why in 2013 it would be time to stop issuing typewriters with touch screen behind powerful devices what can everyone do?
Let's test the skills of a mobile shaman and turn this utter horror into at least a useful device on updated version systems. In addition to a beautiful tambourine and learned dance moves, we will need to assemble a couple of necessary instruments. First, as usual in a decent society, we will persuade the phone to give us administrative rights. That is, we get root. Turn off the antivirus for a while, for some reason it diligently swears at the z4root program for a smartphone, although there is nothing wrong with it. Download it from here ( http://ubuntuone.com/4giKXScNpqq4F49ajQr0nD). In the phone settings, go to the application item and check two checkboxes - “unknown sources” and “USB debugging”. Also from put out android market (Google Play) EZ Explorer app or equivalent. Now it's up to the small - install the z4root program through the file manager received from the market, run it. Press the big root button. Next comes a reboot. Look for the su app or superuser on your smartphone. Its presence confirms that the administrator has appeared.
Next, an advanced bootloader (more precisely, recovery), CWM is installed. He is able to make a copy of the official firmware, put another, instead of ruthlessly erased. Copy all valuable information, contacts from your phone, charge it up to at least 80%. Unzip the archive ( http://yadi.sk/d/Uvlah4T41m0fs) with the title ClockWorkMod Recovery to any folder. Connect the long-suffering device to the computer. Turn off the phone, hold down three buttons at once. There's nothing to be done, art requires effort - the power button, the volume rocker down, the red end call button. Hold until it vibrates or flashes, your Windows will let you know it is in the process of installing new drivers. Release the buttons, everything is fine. Go to the task manager, take a closer look at whether the drivers are installed. Do not close the dispatcher yet, you may have to add drivers manually, bypassing the automation. In the folder where you unzipped the recovery, find the install-recovery-windows.bat file, run it. A window will flash quickly, wait about three minutes and turn on the phone as usual. If the window is frozen on the screen with the reproach "I'm waiting for your device", then Windows drivers didn't see. It's sad, but we can fix it. We open the task manager window, we find our device there under the name android, right-click to feed the archive with other drivers to the computer, more accommodating ( http://yadi.sk/d/eF3NEM6J1m0Yo). And then run the recovery installation batch file again. Those who succeeded the first time, do not re-flash CWM!
We have come close to the decisive battle for the convenience and performance of a snail-like smartphone. So, transfer the archive to the memory card ( http://www.mediafire.com/?s2tluoi15syvmxb) with the firmware of a very nice person and developer, Cobaltum. Its development accelerates the processor to 600 MHz (later in the settings, set the speed to no more than 652 MHz!), Optimizes the memory, cleans out all the unnecessary installed in the firmware by the operator. The list of improvements, in comparison with the official one, takes up a page and a half in small print. The alternative is based on Android 2.3, processed by the Cyanogenmod team. Specifically for the device presented today, it was finalized by Cobaltum. Why do we describe in such detail who did what? Without file-cleaned new firmware, all users would be forced to use only what is offered with the phone on the day of purchase and a couple of months later, while updates arrive. And there is surprisingly little on offer. Having finished with a lyrical digression, let's move on to the firmware part. Transfer the second archive to the card ( http://yadi.sk/d/UjtCQRnY0yF2S), again without unpacking. Hold down another combination of keys, on the switched off phone - the power button, answer the call (green), the volume rocker up. A dark menu with white letters will appear. That's what we've been looking for for so long. Scroll through the menu with the sound rocker, and confirm the selected items - the power button is short. First, as we said at the very beginning, we copy official firmware. Go to Backup and Restore, select Backup. The phone will helpfully save an absolute copy to the memory card. This is done as a last resort in case of trouble with the smartphone, if suddenly something happens against the script. In such an unlikely event, there is a way out - go to the recovery and select Restore. When finished copying, go to the items "wipe data / factory reset" and "wipe cache partition". Select them one by one. With this we clean the phone, making room for a new one.
We are waiting for the final - installing the firmware. Select the item "install zip from sdcard", in it look first - big archive with firmware. When the process is over, take the second, smaller one called gapps. These are Google services. Install them too. Restarting the device is done with the reboot item. The first launch from the black screen to the desktop takes 10-15 minutes, perhaps a little faster (everyone has it differently). Congratulations, you have done the impossible - you have turned a touch dialer into a smartphone to the detriment of operators' marketers.
Customize your phone, change anything - now you are not only an administrator, but also the owner of a phone with a good, fast firmware!
Finally, two small tips - a complete low-quality memory card, it is better to replace it with any other. Often unexpected smartphone glitches are associated with bad cards. Since the screen is resistive, it sometimes needs to be calibrated. If it behaves strangely, incorrectly fulfills pressing, and the calibration does not work, install the third archive through the recovery using the method a little higher ( http://yadi.sk/d/uyHT4OIf1m7Eo). Then re-calibrate. The glitch will disappear.
