Hi everyone, I decided to update the article about flashing our Nokia N900 ... many people need this article, but it is not up to date here - links to downloading files and pictures do not work :(
So let's go ...
The full firmware of the phone is to write two files to the memory of the Nokia N900:
- 1 file - eMMC image (Vanilla)
- 2 file - file system (Combined).
Since the official site for nokia firmware The N900 has not been working for a long time, download everything you need with TMO: http://talk.maemo.org/showpost.php?p\u003d1418219&postcount\u003d13 or from the user’s Yandex disk Vasiliy_LiGHT, for which many thanks to him :)
For Ubuntu users of like distributions
First, download the program with which we will flash our Nokia N900 - flasher-3.5. Then we unpack the rar archive and then another tar.gz archive.
Now download the firmware files:
You can rename the first file to 1.bin and the second to 2.bin, respectively, for the convenience of working with them in the terminal.
Turn off the phone!
Put these two files in the unpacked archive directory tar.gz, go there in the terminal and enter the command (first we sew eMMC!):
sudo ./flasher-3.5 -F 1.bin -f
After which you will see the exhaust in the terminal:
flasher v2.5.2 (Oct 21 2009)
Image "mmc", size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
Now connect your off U (she's 7).As you see the USB icon on the N900 screen in the upper right corner, release the U key and look at the kernel flashing process on your Nokia N900.
As the eMMC is flashed, disconnect the N900 from your computer. Now we will sew the second file ...
It is sewn in a similar way, only the whole difference in the command in the terminal. Enter the command:
sudo ./flasher-3.5 -F 2.bin -f -R
flasher v2.5.2 (Oct 21 2009)
SW version in image: RX-51_2009SE_20.2010.36-2_PR_MR0Image "kernel", size 1705 kB
Version 2.6.28-20103103 + 0m5
Image "rootfs", size 185728 kB
Version RX-51_2009SE_20.2010.36-2_PR_MR0
Image "cmt-2nd", size 81408 bytes
Version BB5_09.36
Image "secondary", size 109440 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.9 + 0m5
Suitable USB device not found, waiting.
Now also connect off Nokia N900 using a USB cable to a computer, holding a pressed key on the phone U (she's 7). As you see the USB icon on the N900 screen in the upper right corner, release the U key and look at the firmware process file system to your Nokia N900.
At the end of the firmware, your Nokia N900 will turn on and start loading :)
For Windows users
All the same, just download the flasher-3.5 firmware for Windows. Next, put it, throw in its directory those two firmware files (1.bin and 2.bin), open command line (cmd), go to the flasher-3.5 directory and flash it as in Linux, with the commands:
flasher-3.5.exe -F 1.bin -f
flasher-3.5.exe -F 2.bin -f -R
respectively. Exhausts will be as in Linux.
Smartphone firmware Samsung Galaxy Note III SM-N900 with single-file firmware via Odin, I will tell you how to reflash your phone and get Root without the risk of getting a brick.
During the firmware of single-file firmware, user data (settings and programs) are saved on your device and are not deleted, so you don’t have to full reset, but still, for the stable operation of your note, it is recommended to make a full reset to the factory settings.
ATTENTION!
During the firmware of the Samsung Galaxy Note III SM-N900 with single-file firmware, BOOTLOADER is flashed, in cases unsuccessful firmware the device cannot be restored at home.
Be sure to check that the following conditions are met before flashing and that the firmware file is not damaged:
- The device is 100% charged, or at least 80, if less - I highly recommend charging the phone first.
- The USB wire through which you are going to send the phone works fine (through it the firmware goes through Odin correctly, files with a size of 1-15 GB are copied to the internal storage without freezes and dumps) I recommend using USB cable Samsung U6 or U2.
- The computer from which you will flash Samsung Galaxy Note III SM-N900 is working correctly, does not give out spontaneous Blue screens death, does not restart or shuts down spontaneously, checked for viruses.
- You first read all of this FAQ to the end. samsung firmware Galaxy Note 3.
- The computer you are sewing from is a laptop or a computer equipped with a UPS capable of working for at least 20 minutes in case of blackout.
- You are sure that you need all this, and you know exactly why.
- All Kies processes are closed through the task manager.
Well, let's go directly to the process of flashing our smartphone
and Not official firmware, but already with the obtained rights Root SER-N900XXUBMI 5-201310011021 20.zip
3) Install Odin v1.85 and drivers on the PC, run one:
4) In the PDA item, select the firmware file with the extension TAR or.md5 and set all the daws as shown in the screenshot
5) We enter the smartphone into boot mode, on the switched off smartphone, hold down Volume Down + On simultaneously. + Home, then confirm the desire to flash the Up button, and connect it to the PC, Odin v1.85 should recognize the phone (in the ID: COM window the port number will be displayed on a yellow background)
6) To start the process of flashing the smartphone in Odin v1.85, press the START button. Be sure to wait for the end of the firmware.
In addition to the firmware, the SS_DL.dll file may also be in the archive — we do not consider it — this is the remainder of KIES.
Do not forget that if you flash in this way, a yellow triangle will appear and the counter of non-factory firmware will begin counting, which will invalidate the guarantee.
If you want to get Root on a new samsung smartphone Note 3, without a headache, then this detailed article in which all the methods of obtaining Root Note 3 are collected for you.
What is a root?
For those who have just become a beginner or are not an expert in the vast world of Android and are not particularly familiar with the concept of how - Root Android, and also why is it needed, what can be done after obtaining Root rights or how to get rid of them if they are no longer needed, all this can be found in the detailed article!
Primarily!
This article has no "left" links or unnecessary actions! If you really need Root Rights, then read carefully and follow step by step, this is a guarantee that you will do everything right! This article on obtaining Root rights is divided into two parts: The first part is Prerequisites and conditions, the second part is Instruction manual how to get root rights using the received files and programs. If during the process of obtaining root rights Android constantly reboots or in the process of perpetual download (it happens extremely rarely, but still), then it’s worth it. Now let's get Root rights!
Android manufacturers sometimes release new firmware, on which it is impossible to get Root in one of the proposed ways, if the article still has alternative methodstry them. It doesn’t work anyway? Indicate android version and the firmware version in the comments (you should not write vicious govnokommentarii, this you will not put yourself or the other). Android hangs (does not load), read and re-read from the FIRST paragraph, all the necessary links in the article are present!
Still have questions?
Have questions or can’t get root access on your Android? Leave comments about what you did or didn’t succeed, or you did otherwise.To get Root Samsung Note 3 you need:
Preliminary
1. Computer or laptop
For Method No. 1 (Android 4.3 - Android 5.0)
Download update for rooting Samsung Note 3:
Attention! Download only for your model!
Android 4.X
- For model N900 - Download
- For model N9005 - Download
Android 5.0
- For model N900 - Download
- For model N9005 - Download
- For model N9006- Download
For Method No. 2 (Android 4.4)
6. Download the UPDATE-SuperSU.zip update archive to obtain Root rights
7. Download CWM RECOVERY:
- For model N900 - Download
- For model N9005 - Download
- For model N9006 —
N900XXUEBOA6 Android 5.0 Lollipop firmware for Galaxy Note 3 SM-N900 Russia.
We have seen a different firmware leak now, and the most popular among these leaks from Samsung devices. After android exit 5.0 Lollipop, several manufacturers began to release the latest updates for their flagships, and those that were planned missed too with leaks. Most of these firmware can be followed, although they are announcements or beta, in order to get a fragment of the features, until they received the official one.
IN lately We tried to install a Lollipo firmware leak on the Galaxy Note 3, which has gained popularity over time. And recently, we were pleased to see that the official Android 5.0 Lollipo was released for the Galaxy Note 3 (SM-N900). The official assembly direct release from Samsung with all the features of Lollipop along with it and claimed that the firmware is stable.
Today, we have a fresh Android 5.0 Lollipo firmware for users of Galaxy Note 3 (SM-N900). The update is intended for residents of Russia and has the assembly N900XXUEBOA6.
Warning:
Use these instructions at your own risk. We will not be responsible for anything that happens to you or your device that results from using the information in this manual.
Firmware Details:
Model: SM-N900
Model Name: GALAXY Note 3
The country: Russia
Version: Android 5.0
List of changes: 3779962
Build Date: Tue, January 13, 2015 16:11:27 +0000
Product code: SER
PDA: N900XXUEBOA6
CSC: N900SEREBOA6
Modem: N900XXUEBNL6
N900XXUEBOA6 Android 5.0 Lollipop firmware for Galaxy Note 3 SM-N900 Russia. Preparing for firmware:
- This tutorial is only for Samsung Galaxy Note 3 (SM-N900). Please do not attempt to flash this on any other phone or tablet options.
- Make sure the drivers for your device are installed on your computer.
- You need to enable USB debugging mode which is disabled by default.
- Your device should have 70-80% charge.
- Make sure that you are done in the phone memory before proceeding.
Download firmware and Odin tool:
\u003e\u003e Download ODIN, (Odin3.09.zip) which will help you install this firmware.
Install firmware:
1 . The first thing to do is to download the necessary files on your computer at the top.
2 . Save the firmware and Odin to your desktop.
3. Unzip the ODin and install the program on your computer.
4. Then unzip the update file in the same folder as Odin.
5. Ok, now on your computer, run Odin as an administrator, because administrator rights are required to complete the process smoothly.
6 . Also turn off your smartphone and wait a few seconds before proceeding to the next step.
7 . Enter your devices in boot mode.
8 . Now the phone is loaded in boot mode, and Odin is running on the computer, now we only need to connect them with a USB cable.
9 . A message appears in the lower left corner of the ODIN, saying “Added!”. If you do not receive this message, then you should try another USB port (try the USB port located at the back of the desktop). If this also does not work, then you must reinstall the driver. If you have successfully added “Added!” Messages in ODIN, then you are ready to go to the next step. In addition, the COM port should turn yellow in yellow if you have successfully added the device.
11. Now you can pick up the tar file that you received after unpacking.
12 . Do not make any changes on Odin, we leave everything as it is.
13 . Double check everything we said above. Now, if you have verified all the orders, click “start” to start the firmware procedure.
14 . Once the installation is complete, your phone will reboot, and soon you will see a PASS message with a green background at the top of the ODIN. Now you can disconnect the USB cable, disconnect the device from the computer.
Congratulations! Manual installation of N900XXUEBOA6 Android 5.0 Lollipo firmware update is completely done for your device! After successfully flashing and now you want to get superuser and recovery, here is the link below for you.
Although Samsung Galaxy Note 3 is a completely new smartphone, many still can not wait to reflash their device and get the latest firmware. In addition, there are cases when it is necessary to flash the device due to some kind of malfunction or “glitch”. Therefore, today we will pay attention to the flashing of the Samsung Galaxy Note 3.
What do you need to know?
First of all, you must have root-rights, other owls-super-administrator rights. Without root you can’t do anything, so follow this link and read how you can get them. Further, you should understand that if you will reflash the device, then it will cease to be supported by the manufacturer. In addition, your smartphone must be 100% charged, USB wire through which the device will be flashed should work normally, without any freezes and anything like that. The computer itself should work correctly and, most importantly, if your apartment or house is de-energized during the firmware, the computer should work for at least another 20 minutes, that is, you must have an additional battery. Otherwise, your smartphone will turn into a brick if during the firmware you turn off the light. Also, before flashing, you should pay attention to this article by clicking on this link.
If you will reflash the device, then it will cease to be supported by the manufacturer
What do you need to have?
Download the firmware files, as well as the Odin3 V1.83 program. Also need here personal Computer and, of course, a USB wire. It is worth noting that the USB cable should not be damaged, so that during a flashing there should be no malfunction in the connection.
