Flashing a phone is sometimes the only option to restore its stable operation without the need to contact a service center or private craftsmen.
Let's say your smartphone starts to freeze, does not turn on, does not respond to commands, cannot update, cannot find the network, etc. In such cases, it is not necessary to immediately contact specialists, you can try to reboot first, reset the settings, or, in extreme cases, reflash it with the official Windows Device Recovery Tool.
If you are looking for information on how to flash your Nokia, Microsoft Lumia or any other smartphone based on Windows Phone and Windows 10 Mobile at home, then this instruction will help you with this.
Smartphone firmware for Windows Phone 8, 8.1, 10 via computer
Important! Before you start flashing your device, make a backup copy of your data, as all files and documents will be deleted. After the procedure, you will receive a completely clean phone. Read how to backup data through the Windows 10 Mobile interface. You can just transfer all the files to your computer.
What is required for firmware
- PC or laptop with Windows 7, 8, 8.1, 10 installed;
- Good USB cable and port;
- Firmware program;
- The victim itself, whose battery must be charged at least 50% (preferably fully).
Download and install Windows Device Recovery Tool
This program is specially designed to update smartphone software. You can download it for free from the official Microsoft website at.
- Download the installation file;
- Installing the utility;
- We launch it and connect the phone to the computer.
Step by step flashing process
Important! Before you begin, keep in mind that you cannot turn off the device during the procedure. It is also forbidden to close the program, turn off the computer, etc. Otherwise, instead of a smartphone, you will get a lifeless brick.
So, we launched the program and connected the smartphone. The following window will open:
Click on the image with the device, after which we see information about the available firmware version. Select "Reinstall Software".
Click "Continue".
In the next window, you can leave nothing unchecked and select "Continue without filling."
and then installing it.
After some time, the firmware of the phone will be completed, click "Finish".
This is how we updated the software of our smartphone in such a simple and official way. After that, the device will reboot several times and you will need to configure it before the first start.
First start after flashing
After the smartphone starts up, you need to select the language, and continue the setup by accepting the terms of use.
In the next step, you can select the type of settings - recommended or custom. If the latter, then I advise you to uncheck all the boxes except for the first two and the last two items. After that, you need to configure the region and time: set the country, time zone, exact date and time.
The instruction is taken and translated from the site http://forum.xda-developers.com/showthread.php?t=2515453 .
All at your own peril and risk.
We compare everything according to the screenshots in the topic.
Software links
Download and install if you don't have this program
Download and install .
Download .
Charge your Nokia Windows Phone battery up to at least 50% of its capacity to avoid unnecessary problems!
Pull out the SIM card during the whole process!
For those who have a Nokia-smartphone on Windows Phone 8 with a micro SD card, it is better to remove the SD card during the whole process!
For Windows x86 (32bit) PC
Copy the UserGroupsConfiguration.cfg file to the following three directories:
"C:\Program Files\Nokia\Nokia Care Suite\Data Package Managerbin" with file replacement
"C:\Program Files\Nokia\Nokia Care Suite\Multi Software Updater 5.0" with file replacement
"C:\Program Files\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0" with file replacement
For Windows x64 (64 bit) PC
Copy the UserGroupsConfiguration.cfg file to the following three directories:
"C:\Program Files (x86)\Nokia\Nokia Care Suite\Data Package Managerbin" with file replacement
"C:\Program Files (x86)\Nokia\Nokia Care Suite\Multi Software Updater 5.0" with file replacement
"C:\Program Files (x86)\Nokia\Nokia Care Suite\Product Support Tool For Store 5.0" with file replacement
Download firmware (ROM) for the desired product code
Launch Nokia Care Suite and double click on Data Package Manager. Click on the "OK" button login groupe must be selected Nokia Care Suite, Server. If it does not enter and thinks for a long time, press the work offline button, the program window opens and in the upper left part of the window, select File - Work Online.
Fill in the two parameters Product Type and Product Code. Click on the Search button. Right click on the file and select "Download Selected" wait for 100% download.
Product type for lumia 520 orange france "rm-914" product code "059S102"
(without quotes).
All product codes are on this site:
http://forum.xda-developers.com/showthread.php?p=49364574
List of countries and phones that received lumia cyan update and lumia Denim update:
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/availability-in-europe/
Firmware process
Launch Nokia Care Suite, Click on work offline "work offline" . Stay in "No connection" mode.
At the top left of the window, select File - Open product . In the filter field, enter the product type of your wp8 Nokia Lumia (in the case of the screenshot, (RM-821) Nokia Lumia 920). (In my case it was RM-914 Nokia lumia 520) Then "Open" .
Bottom left, click on programming and then click on restore.
Click on the list of updates (update list, uncheck). Select firmware. Click on Start . Wait a bit, an error will appear (this means that the application has lost connection, but this is normal because the phone is not connected).
Plug the USB end into a USB port on your computer. Turn off wp8 Nokia Lumia. Connect the other USB end to the USB port of your wp8 Nokia Lumia. Press both power and volume down buttons. After the vibration appears, click on "Retry" in the Recovery window.
If you get this message: "You have selected an unassigned product code for this device, you want to continue" This is normal, it just means that the selected Product Code does not match the one on your Nokia Lumia. But do not worry, this is quite normal. Click to OK.
In no case do not disconnect the USB cable and do not close the program on the computer and do not turn off the computer while flashing the smartphone!
But even if something happens, it can all be restored through the same program.
The process completed successfully. Click "ok".
After the firmware, feel free to go to Settings - Phone update. And update to Cyan+ 8.1. After the update, you can still get additional updates through the Preview for developers app.
Screenshots of my lumia 520
Has your phone started to malfunction? You will most likely need a quality Nokia Lumia 1020 Firmware. Head to our Telemama service center, because there is no better place to do this job.
Nokia Lumia 1020 firmware timing
As a rule, this work takes less than 40 minutes. We can also help if you need an unlock, unlock or Russification. Repairs will be completed as soon as possible.
| Seize the moment: 2 weeks left before the end of the promotion! Seasonal discount 40-70% |
|||
| Name of spare parts | Spare part price in rub. | Installation price in rubles | |
| Touch screen replacement | See | 900 | |
| Display Replacement | See | 900 | |
| Power connector | 900 590 | 900 | |
| Microphone \ Speaker | 900\700 650\450 | 900 | |
| Power button | 950 550 | 900 | |
| Sim reader\Flash reader | 1200\1300 750\800 | 900 | |
| Antenna module | 1200 700 | 900 | |
| cameras | 1400 950 | 900 | |
| Joystick Replacement | 1200 900 | 900 | |
| Power IC | 2500 1900 | 900 | |
| Display controller | 1400 950 | 900 | |
| Recovery after impact / water | from 600 | ||
| Transmitter power amplifier | 1600 1250 | 900 | |
| Headset controller | 1200 750 | 900 | |
| sound control chip | 2200 1450 | 900 | |
| wifi module | 1600 950 | 900 | |
| Bluetooth module | 1400 950 | 900 | |
| vibration motor | 990 680 | 900 | |
| Firmware | 900 | ||
| Recovery after corrosion | from 900 | ||
| If you did not find the desired position in the price list, in this case, call us - we will help you. | |||
Price
If you want to know how much it will cost to remove the code, change the software and other services, you can view the price list. Also, you can always call us, our managers will advise you on any issue.
How to make Nokia Lumia 1020 firmware?
- Naturally, everyone can come to our service in order to hand over the phone for repair.
- Here you can call a courier to your house. In this case, you can save a lot of time.
For our specialists nokia lumia 1020 flashing- a simple and not long process. It means changing the software. As a rule, it is carried out if the cell phone is buggy, freezes, applications do not open, certain functions do not work correctly, or do not work at all. Correct firmware Nokia Lumiya 1020 can only be done by a professional with work experience. We do not recommend doing this at home, because you risk being left without a phone at all.
Many users turn to us to unlock Nokia Lumia 1020. Most often, owners who buy a device abroad face this problem. If the phone is made under a certain operator, it will no longer be possible to connect to another and make calls. Our specialists will fix this problem in a short time. The work is not the hardest.
Very often, when buying a Nokia Lumia 1020 abroad, it lacks the Russian language. This becomes a serious problem for many users, because using the menu in English or another language is not always convenient. In this case, Russification of Nokia Lumia 1020 is performed in our service center.
If you had to deal with any serious problem, you can rely on us completely. Only experienced, highly qualified specialists work in the Telemama service center, who will be happy to help you solve the problem.
The main thing is to seek help in time and not aggravate the situation. The cost of all our services is very affordable, so we will make even the most complex repairs at a very affordable price. After we fix the damage, we issue a long-term guarantee. Your phone will work perfectly because we use original spare parts and only proven programs. In the event that you want to expand the capabilities of your cell phone, you can entrust this work to us. We will make the firmware, after which the Nokia Lumiya 1020 will function perfectly.
