Router from Beeline SmartBox One is a device that is used to distribute traffic when connecting to the Internet. How to configure the router you will learn by reading the description below. There is such a router about 2500 rubles. An alternative in the absence of a cable connection is a 4G ZTE MF90 router.
Beeline Routher Characteristics
SmartBox One - on this moment The newest model of the router from Beeline. One of the advantages of the product is a complete set of the device with a more powerful transmitter capable of functioning in two frequency ranges: 5 GHz and 2.4 GHz. This reduces the degree of likelihood that any user-applied device will not be able to connect to the World Wide Web.
To the advantages of using WiFi router Beeline Smartbox One is also appropriate to rank as follows:
- Convenient software interface used to configure network connection;
- Ergonomic modern design;
- Support connection to digital TV;
- Maximum data transfer rate - 300 megabit per second;
- Standard 802.11, which is supported by most modern high-tech devices.
In the case of 4G device, the data is transmitted at speeds up to 74 Mbps. Included with Beeline SIM module comes with the device, which opens access to the use of 30 GB of traffic for a month. Subscription fee - 1200 rubles. At night, when connected to 4G network, the limit is missing.
How to set up 4G / WiFi Beeline device
There is nothing complicated in the router connection. Rear panel Product has 7 connectors. To the POWER jack you need to connect the power cord from the power grid, and to the WAN connector - the Internet cable, which is held in the apartment. In the next step by connecting the cable to one of the LAN connectors, you should connect the device with a computer. The 4G router from the laptop or stationary PC is connected via the USB port.
- Making sure that all the router from Beeline Smartbox ONE indicators tanned, run any browser installed on the computer, and in the address bar, enter 192.168.1.1;
- On the welcome page that appears in the appropriate fields, enter the Admin password and the same user name ( standard settings), click on the button with the "Continue" inscription;
- In the new menu that opens, inexperienced users can perform the procedure. fast settingsIf the experience in this plan is available, you can go to the advanced settings.
Simple Beeline Routher Setup
If you want to quickly configure the router from Bilain, then there are 4 points. They are as follows:
- “Home Internet”;
- "WiFi Network";
- "Guest network";
- "TV".
The "Home Internet" item is used to connect to the network of the Beeline operator. Since all the required parameters are already contained in the software installed (firmware), the user will only need to enter a password and name (both values \u200b\u200b- admin).
"WiFi Network" - an item in quick settings that opens access to settings wireless network. Here it is necessary in the appropriate fields to register the name highlighted in the connection menu on the devices used, as well as a password for at least 8 characters.
"Guest network" is an item for making settings to provide guest access to the Internet.
The "TV" item is used to select the LAN port to which the cable from the IPTV console will be connected if it is available.
Connecting a router from Beeline
After entering all the required data and the execution of the required settings you need to click on the "Save" button and wait until the device connects to the network. By time it should take no more than a minute. If everything is done correctly, the "Internet is connected" will be displayed in the Status Row. On this, all operations are considered complete, you can go to work on the network.
Update software for the ticket Beeline
The software installed by the software ensures the functioning of the router. In order to avoid troubleshooting, the firmware should be updated in a timely manner. But to act when performing such procedures, it is necessary to be extremely careful. Otherwise, if something goes wrong, the operability of the router Beeline will be able to restore only the specialists of the service center.
Important! Software download only from the official site.
The download process and installation of updates for the firmware consists of the following steps:
- We launch the browser, in the address bar We introduce 192.168.1.1;
- Enter password and login (admin);
- Go to the extended settings menu;
- Select the item "Others" at the top of the page; In the window that opens, click on "Update By", after which you select the address on which the downloaded software will be located on the computer;
- Click on the "Run Update" button.
After a few minutes, the router will reboot and will be ready to function again with the new software.
The firmware of this wonderful router with excellent functionality is not performed.
- In contact with
- Facebook.
- Twitter.
- Google+
Connecting in stock "House of the 21st century +" and you brought to your apartment on the day of connection Wi-Fi Router Smart Box.. Typically, the entire equipment setting is carried out by an installer when connected. There are situations where for some reason the configuration of your router got lost and you need to reconfigure your Smart Box. For this purpose, the instruction is presented below.
The main parameters of the SMART BOX router:
- Router address - 192.168.1.1
- Last firmware — 2.0.11
- Username to access the device - Admin
- Password to access the device - admin
- Network Network (SSID) - SMART_BOX-XXXXXX (where X is unique characters for each device)
- Wireless Network Key (Wi-Fi) by default - without key
Connecting the SMART BOX router
1. Insert the cable held in the apartment by our installers in the WAN port, and the computer is connected to the patch cord (cable) from the router set to any of the LAN ports. You can also connect your computer with a router over the Wi-Fi network, but at the first stage it is still better to use a cable connection.
Connection setup
2. So, you connected the router to the computer and to the cable from the entrance. Next, open your browser and enter address line 192.168.1.1. You will have to get to the welcome page. Click on the button Proceed.
3. The configuration program will be prompted to enter the username and password. Enter in the first field admin.and second admin.. Click Proceed.
4. Now you will enter the main menu. Press the button. Fast setting.
"Home Internet" - This section is configured to configure an Internet connection, all data that is required to connect is contained in the device's memory, you just need to enter your login and password from the contract to the appropriate graphs.
"Wi-Fi Network of the Router" - In this section, you have the ability to customize the wireless home Wi-Fi Network. In field Name Name You must come up with and enter your network name, such as free_wifi, and enter the network key to the network key to protect your connection from non-authorized access. Please note the network key must be from 8 characters including on the choice of numbers and letters of the Latin alphabet.
"Guestbook Wi-Fi-network" - It is possible to configure the guest Wi-Fi network.
"Beeline" TV - If you are also a television subscriber, you need to select the port (LAN1, LAN2, LAN3, LAN4) to which you connect the console. In the event that you view the Channels on the PC or using the Xbox 360, you do not need to customize the ports.
To save the settings, click Save.
6. To save the settings and connecting to the Internet, the router will be required about 1 minute.
As soon as the connection is established, opposite the string Status A message will appear "Internet connected". Take congratulations! Router Smart. Box. fully configured to work online Beeline.
SMART BOX firmware
First, download the firmware - Smart_Box_2.0.11.img
1. Opening the browser go to the page 192.168.1.1? We enter login admin., Password admin.and press the button Proceed.
2. Click on the button Advanced settings
4. A page with advanced router settings appears. In the Left menu, click Software Update. Press the button select a file And with the help of the review, select the location of the downloaded file. Next you can click the button Run the update.
5. Wait until the device will update the firmware, it takes about 5 minutes, after that the router needs to be restarted (pull out and insert the router power cable back). Your Smart Box is ready to work.
Beeline firmware flood the actual file. Beeline SB and SB O with OW firmware to buy on. Beeline S value is 1800 rubles there 3 web interfaces are flooded Beeline, Rontel, and GPON. A LED, Beeline Router S B O has. Beeline Alternative Firmware Added Distribution Added. Video lesson demonstrating the possibility of controlling the Beeline TV Pause Beeline, rewind, program recording. Beeline S b Unlock under all operators. Thanks said 205 times
Download the archive with the firmware files for b s b o and unpack it on local diskFor example, in the folder F. Tag cloud tuner firmware O 800, Huawei Sax MT882 How to flash and break the link Link to any, Beeline S B O, Alternative Review. Thanks said 618 times. Firmware of the router S b o dual-band WF beeline router S B on b O. Reinstall software Perform with the sole purpose to save the router from the bugs of the previous firmware. You have become a subscriber of television and the Internet Beeline in Saratov, connecting on the promotion of the house of the 21st century and you in the apartment per day. Now, in the new personal Cabinet My Beeline can easily monitor costs, connect services. After flashing the ticket Beeline, it must be rebooted with new firmware, after which s b
A more interesting option is to stored on it any popular alternative firmware, like or. B Alternative firmware. Wait until the router performs the firmware update, this process approximately takes 5 minutes, after which the router. Thanks said 467 times. Router Beeline S b regular. Instructions for the Beeline ROYLER S B Installation and configuration of the equipment required for the current firmware version. B S B Alternative firmware. Framelessly lying at home, sent to the scrap immediately after connecting to L2TP biline, t
Thanks said 465 times. S Firmware Under other providers Updated Fresh file. Load last version Firmware for B S b O and unpack. Firmware S S b O B S b Bren. Router Beeline S B O. s Alternative firmware download. Router Beeline S B O has four LAN outputs, provides. Router firmware added updated file
Carefully examine the instructions for the firmware B s Box One and. Alternative firmware of the beeline router Updated actual distribution. Wait until the router performs the firmware update, this process approximately takes 5 minutes, after which the router is necessary. Beeline Routers S B O. Starting with the firmware version, Superwasher Password is changed on serial number SFXXXXXXXXXX devices. In our city, InternetProdeder Beeline began to connect subscribers for the so-called optics to the FTTB house in parallel with. Router Beeline Alternative firmware flood new archive. Firmware Router Beeline Alternative Firmware Updated Updated File
Nothing secret when performing the firmware B S Box One is not, so perform this procedure Do not even experienced user. Now I took their s b, then SB O from. Beeline SB and SB O with OW firmware Announcement of sale in Krasnodar. That is why I started searching alternative firmware Under a smart box and soon realized that there are no them and in the near future. Routers settings Iline S b firmware update. WF Beeline S B, or. S Alternative firmware from Beeline Forum. Hello everyone, so there is S b O read allegedly it is identical to s b ordinary! Other tanks, Beeline, Beeline, firmware
S b b n300 firmware [. Download actual version Firmware can be from the official website of Beeline or from here.
The tale on how I made a candy rocket and more precisely translated on the router to the Padavan firmware.
Hardvari, IT shops, owners Smart Box Pro ask for Cat!
"No Billbold" ®
Carefully present paragraph 18,
Post from the section / discharge Make Alone yourself! This is a technical post!
Baby Boygiz- It is important: the article is written on people with hands that you know how to keep a soldering iron and know how to google!
Preface: (pain) You can skip:
I had a router Asus RT16, I lived and did not stead. (It was possible on this)
In the yard of 2014. I had to become a young fallen, soon my daughter was born.
I wanted myself, a powerful router, no worse than asus RT16 and was support for WiFi 5 GHz!
I began to choose myself a router: Take the kinetics shouted the subsoil of forums, the wallet said: do not pull.
There was an advertisement "Hey guy want a router for free, took the advertisement, and in the conditions there were an Internet for 1 year and a router you get for free.
I immediately thugged and caught an article on the Habré "Router from the provider, no need."
It seems nothing foreshadowed troubles -craulic iron CPU1: MediaTek MT7621AT (880 MHz, 2 kernels)
RAM: 256 MIB (ESMT F59L2G81A-25T), gigabit ports, WiFi 5 Hertz, two ports of Sebi, here I thought!
The inner voice said: Listen! - And that guy that takes the VPN with you, will it take to take it a year 1 year? - Yes, I answered in thoughts! And then the wallet shouted: "The budget is isolated - adjustments made.
That's how I became the owner of Smart Box Pro.
After putting the router after RT16 for a month 3, I was covered with work, and forgot about it.
Slowly began to emerge flaws of a router, ahaachhah Naive Chukotka boy - free cheese only in a mousetrap!
The router was created at Sercom, on request Beeline.
It was represented by a perverted simple GUI, but there was no torrent, and someone did not declare.
There is no VPN server. There is a long server, but when you meet with Cyrillic on the disk, it hung tightly.
Percentage load. In a simple 23%, the settings of the procked ports are forgotten after the restart, the enhanced googling of alternative firmware said
: "Miracle will not be"
Memory in the NAND device with a locked loader.
At the IXBT forum, such as me were traced. After reading many pages came to a short conclusion that RGMI 2 was cut off with van port on the light bulb and it became a pseudo gigabit.
As a result, you could meet the statement on the forum, buy a normal router.
Everything was very sad.
The idea that the investments were in vain, but after remembered that it costs the way at that time as much as 5990 rubles. I remembered the revealed jamb of the bottom of the server and decided to make a ticket into the technical support of the provider, it was 2015 year July / June a month.
Technical support worked promptly, connected from the removal revealed that the problem is real and that's all.
Once every six months of C2014, I called Beeline and asked how it was done with my ticket, for which I was infinitely crossed - once at the head of the department with complaintship clients. There I was answered "The young man router works, what claims? To which I objected: But it does not work correctly the last server, but it is stated in the router and your experts confirm this, for which this inadequate person answered me is not our router, and from the company SERCOM to contact them.
I objected - the router created by the order of the biline sold under the Bilan brand - at Biline, became immediately Routerm not Biline, for which they just threw off the call.
The call to Moscow SERCOM did not give anything: if the short-glass unit on request, ask the customer.
Time was going, daughter was born in December 2014, in 2016 I was the same called unsuccessfully, what did you get the type of type wait for the firmware, the firmware is not so fast, well, yes, it's probably not a programmer's programmer) I had to be born my son, then in my head And the thought surfaced to go to the trip will get to the inheritance to him, may write the firmware by this time.
In July 2018, all the same appeared firmware 2.0.19, I do not know what they had already changed there, the promise to call back when the firmware came out - they had already forgotten.
My knowledge grew in the sphere IT and by iron. And already in 2018 at the end of March, early April, I looked at Smart Box Pro and thought and whether time was not going to open you and do something good.
Hands were screamed, but sober mind saying that knowledge is still little, while I didn't get the comment on the comment on the comment by Mall "The guys Nanda on Speay Flash change and sew, and I asked the link. And how to handle ...
After talking with people on the forum, it was understood as Nand to change the memory on SPI.
About man - what wanted to remake the router -
Further way one way, be careful!
Remember everything is outlined as it is, and there is a big risk of not reaching the end if you break your equipment, you only guilty! In general, "Walk of Walking!"
Given:
Router Smart Boxing Pro -1 pcs
Straight hands - 1 pair
Soldering iron -1 pcs
Flash memory W25Q128FVSIG 1 -St
Light heads - Legion :)
Not necessarily, but it is desirable to have:
1) Soldering Hairdryer or Wood Alloy / Rose-Friends with Programmer Or without!
Action plan:
1) make backup calibrations and firmware. (important and necessarily, until you do backup, do not go to step 2)
2) Placement and Diaucas: Resistor Chip / Flash / Failure Nand
3) Assembling firmware from the project Prometause: Yes, she is there!
4) Return of native calibrations.
Stage 2 can be performed the last one as more convenient, but it is more convenient for me 2)
Let's go: Stage 1
1) Connect to smart boxes about -Super user Login SuperUser, password will be Beeline $ MartB0x or SFXXXXXXXXXX where xxxx-it is the serial number of the device from behind the router on the sticker or in the router menu under ordinary user. We rewrite the poppy addresses of Lan and Wifi useful.
Thank you for the info "Mad Gick" that I began to redo the simple smart box (another model), but unfortunately did not reach the finished result.
Having got the rights of super user-open access via SSH, conclude the PUTTY program, do not forget to stick a flash drive with the FAT32 file system to the router
In Putty after login and password, drive the "sh" command (") the quotes will not drive!
Next, each line is a separate team wait for its execution.
"
CD / MNT / SHARES / A
Mkdir Mtd_Backup.
CD Mtd_Backup.
DD if \u003d / dev / mtdblock0 of \u003d mtd0
DD if \u003d / dev / mtdblock1 of \u003d mtd1
DD if \u003d / dev / mtdblock2 of \u003d mtd2
dd if \u003d / dev / mtdblock3 of \u003d mtd3
DD if \u003d / dev / mtdblock4 of \u003d mtd4
DD if \u003d / dev / mtdblock5 of \u003d mtd5
DD if \u003d / dev / mtdblock6 of \u003d mtd6
dd if \u003d / dev / mtdblock7 of \u003d mtd7
DD if \u003d / dev / mtdblock8 of \u003d mtd8
DD if \u003d / dev / mtdblock9 of \u003d mtd9
DD if \u003d / dev / mtdblock11 of \u003d mtd11
DD if \u003d / dev / mtdblock12 of \u003d mtd12
"
It should work out about like this
collapse / deploy
view @ Smart. Box Pro.\u003e SH.
BusyBox v1.15.3 () Built-in Shell (ASH)
ENTER "HELP" for a list of built-in commands.
~ # CD / MNT / SHARES / A
/ TMP / MNT / Shares / A # mkdir mtd_backup
DD if \u003d / dev / mtdblock1 of \u003d mtd1
523264 + 0 RECORDS IN
523264 + 0 RECORDS OUT
/ TMP / MNT / SHARES / A # dd if \u003d / dev / mtdblock1 of \u003d mtd1
2048 + 0 RECORDS IN
2048 + 0 RECORDS OUT
/ TMP / MNT / ShareS / A # dd if \u003d / dev / mtdblock2 of \u003d mtd2
2048 + 0 RECORDS IN
2048 + 0 RECORDS OUT
/ TMP / MNT / SHARES / A # DD if \u003d / dev / mtdblock3 of \u003d mtd3
40960 + 0 RECORDS IN
40960 + 0 RECORDS OUT
/ TMP / MNT / SHARES / A # DD if \u003d / dev / mtdblock4 of \u003d mtd4
2048 + 0 RECORDS IN
2048 + 0 RECORDS OUT
/ TMP / MNT / SHARES / A # DD if \u003d / dev / mtdblock5 of \u003d mtd5
8192 + 0 RECORDS IN
8192 + 0 RECORDS OUT
/ TMP / MNT / ShareS / A # DD if \u003d / dev / mtdblock6 of \u003d mtd6
8192 + 0 RECORDS IN
8192 + 0 RECORDS OUT
/ TMP / MNT / SHARES / A # DD if \u003d / dev / mtdblock7 of \u003d mtd7
DD if \u003d / dev / mtdblock8 of \u003d mtd8
61440 + 0 RECORDS IN
61440 + 0 RECORDS OUT
/ TMP / MNT / ShareS / A # dd if \u003d / dev / mtdblock8 of \u003d mtd8
DD if \u003d / dev / mtdblock9 of \u003d mtd9
61440 + 0 RECORDS IN
61440 + 0 RECORDS OUT
/ TMP / MNT / SHARES / A # DD if \u003d / dev / mtdblock9 of \u003d mtd9
DD if \u003d / dev / mtdblock10 of \u003d mtd10
102400 + 0 RECORDS IN
102400 + 0 RECORDS OUT
/ TMP / MNT / ShareS / A # DD if \u003d / dev / mtdblock10 of \u003d mtd10
102400 + 0 RECORDS IN
102400 + 0 RECORDS OUT
/ TMP / MNT / ShareS / A # dd if \u003d / dev / mtdblock11 of \u003d mtd11
122880 + 0 RECORDS IN
122880 + 0 RECORDS OUT
/ TMP / MNT / ShareS / A # DD if \u003d / dev / mtdblock12 of \u003d mtd12
2048 + 0 RECORDS IN
2048 + 0 RECORDS OUT
/ TMP / MNT / SHARES / A # dd if \u003d / dev / mtdblock0 of \u003d mtd0
523264 + 0 RECORDS IN
523264 + 0 RECORDS OUT
/ TMP / MNT / Shares / A #
The root of the flash drive or the MTD_BACKUP folder should appear files with the name MTD (X) X - the numbers from 0 to 12.
From the router we take off the USB flash drive and save a copy of the firmware in a safe place.
2) We order a previous USB flash drive on 16 MB W25Q128FVSIG, when you ride the CH341 programmer, you can also order on Ali flashing (for firmware, use the "Calibar or analog" software)
Stage 2A) open the router. Unscrew one screw (closed with a decorative plug), a bit of push along the edges and the housing of the router is disconnected, freeing the fee unscrewing 3 screws - along the way, pretending that we have in the covers and what to put on the processor as a radiator.
Step 2B) The most dangerous stage, so before us the fee and that the download goes from the SPI flash is to overreal 2 resistors, resistors from the position R136 -\u003e on R145 and R156 -\u003e 157, just - 2 small resistors near the rest! We take the soldering iron to the sting type K - a soldering iron on a temperature of 300 degrees as a blank soldering, a bit of a flux of solder for a quick contraction, rattling / we disappear / we find the desired platform. Next, we sear our 8 foot flash drive, to the position U8.
And where is it on the board?
all right? Nothing extended, did not kill the static fee? -NOT!
Stage 2B) Tracks with SPI and Nand Flash intersect, we need to drop Nand memory. Everything is simple: smear a bit of flux, we take a soldering hair dryer - (on my temperature about 360 gr), we warm, blow / raise the microcircuit!
Where it is!
Stop - which hair dryer? No hair dryer! Do not trouble go to the edge of the market (or on your crust) We buy alloy Wood / Rose We take a couple of scales Ludim from 2 sides of the legs of the flush. Melted? We raise the tracks from the alloy, and where they soldered everything with alcohol? / Well, or what is your friend, I use Kalosh (the budget is thin)
Sign of what you did / squeaks dropped everything right and did not kill anything, you can check something like this: you clap on the router from the bottom of the boardthe RESET button and turn it on, the LED will begin to blink in another rhythm, indicating that it is in Recovery Mode.
Ropean and almost ready
But it is not exactly
Congratulations you went to the third stage)
Stage 3) Router do not collect yet, but why? -And suddenly sealed crookedly, the flush bat was?
We connect the wire in LAN 2 well, or any which you liked, but not WAN. Download ASUS Firmware Restorage Version 2.0.0.0 Restoration Version 2.0.0.0 network card 192.168.1.2 Mask 255.255.255.0.
Run the utility and point to it the firmware, you clap on the router from the bottom of the boardrESET button and turn it on, in the Firmware Restoration click to download it will see the router and will die!
Return the settings on the PC network card.
Stitched? Yes, we go to step 4!
-NOT?
- Introduces not sew-and does not see everything.
No problem! We take a flash drive with the file system "FAT32" on a flash drive to the root copy the firmware, rename it in "root_uimage" without ("). Insert into the router clamp from the bottom of the boardthe RESET button and turn it on, the reset is kept until they flood the light bulbs at the router, about seconds 5-8 as soon as the blink is completed. wiFi Network ASUS? Congratulations!
Now we collect everything back! Put on the processor the radiator, drill in the housing
air Circulation Holes
Or maybe even put the cooler from Viyakhi or do not print new housing For a 3D printer. Yeah marked :), but the radiator with ventilation is needed since MT7621A hot percent, can burn at work)
Aaaa where to take the firmware?
- Wake up to gather it yourself!
Thanks to me and good people, in the project in the project. In the Linaro repository, the Sercom line appeared - and it can be chosen-further smartbox. We collect the firmware.
The buttons on the router are caught by the reset will become a belt, the switches of modes will switch the modes, the WPS button will work as you specify in the menu! - HAPPINNES EXISTS!
Respect the work of Padavana Do not spread ready-made firmware builds. Yes, I will master the road going)
It seems we all won? - no!
Stage 4- Final!
Remember the first stage? We take our dump - namely MTD2.
We are interested in the first 64kb !!! Cut with apeks /
About Vinneks.
we open our MTD2 dump in it, press the edit / there / to define the block / in the beginning of the beginning 0 and the second line drive "fff" (") without quotes, click OK, immediately press / edit / there / Copy Blok or copy block looking Who is written in the menu / select to / new file, save it.
In the preserved dump, we drive their poppies at the addresses of the offset 0x4 for 2.4 of the hertz network and 0x8004 for 5 hertz network.
Give a name for example ibykota.bin, the file size will be 64kb
Our calibrations, copy to the router - I used WinSCP, copy it to / TMP on the router and in the Putty we give the team
"MTD_WRITE WRITE /TMP/IBYKOTA.BIN FACTORY" without (")
We get your pans calibration from the factory!
After we give the command "Reboot"
And stage 4 is required? After all, works?
"Yes, it is obligatory, since the bootloader is assembled with corrected by other calibrations, which should not be in the bootloader, it is not full and most likely 5GHz wifi will not start.
- Why then did you collect the loader with calibrations?
-Rearter with calibrations assembled in order to suffer less with the programmer, apeks, the TTL adapter, because with a clean loader - the firmware does not start.
-Terry I'm well done? - If you got a working router, you returned your calibration - yes!
If everything is good, then it will look like this:
Having loaded the router with six loading torch, the load on the CPU increased to 23-7%. Copying from the computer to the disc of the film B15 GB, showed 20-30-40MB / C in the peak, file system disk ext4.
The load on the CPU at the time of copying the file also held about 27% when the online browsing service was turned on to the USB web camera (0.3 mpx 640x480) (0.3 mpx 640x480) load at the time of copying up to 34%. IPERF3 tests showed the speed of pure Etheret 930Mbit / S in the peak and on average 910Mbit / s. It is necessary to consider that the router is in the access point mode, the head is Mikrotik RB3011.
Outcome: From a powerful router with a glible software, we made a candy, pleasing our life with anemmer, printserver, with 2 IB ports, a powerful percent, a large RAM, gigabit ports and the ability to put additional packages from the repository.
Thanks: Padavan for the firmware, Freize for the Project Prometusus, Linaro that added to his repository Smart Boxing about, Taken one gray Cardinal, which decided to stay in the shadows - he helped me in the adaptation of the firmware and bootloader. Well, I walked this way for everyone. Ty (+) Si them in karma and budget!
Separately, thanks to the store for the provided tool, only the mention of it in this review with the promotion of my lazy to write this review, honestly worked out. Use good tool For work, I soldered it, because there are a lot of hands and a good tool, a pair of light heads 90% of success in the case! -And 10% What? - This is good luck, in April 2018 when searching for a cutter chip on the board I killed this router to the state Brick, and only a month later, when he got a soldering iron. The soldering iron on Muska himself turned around - along and pop, therefore I do not see the point of viewing his goal. I can say if you decide to go to the amateur or go with Epsn or goes with Hakco 900, this is what you need! It is comfortable as an epsn soldering iron, no incute lag both with hakco, and has all its advantages. All this alteration is a confluence of the circumstances, pull away the striped less promised normal firmware-this post would never be!
Read? Do you have such a router, but hands are not from there? -Podyum ...
All success!
