Causes of noise in headphones:
You have connected the headphones to a computer or laptop, and instead of a pleasant and favorite music, hear an annoying hiss or crackle, who will like this? At the same time, you do not understand why there are noise in the headphones, where he appeared and what to do with it.
The most unpleasant in the effect of noise in the headphones is that it is very difficult to find out because of what it appeared and how to eliminate it. There can be a lot of causes of cod in headphones, the usual algorithm for finding the causes of bad work of the headphone is consistent in the potential sources of noise, their exception or isolating and further verification. In theory, it looks simple, but in practice such an algorithm is completely impossible.
For example, you have only one computer that is connected to the outlet, which is inserted into the concrete wall, the apartment has repairs and to install the computer to another place, or another room, is impossible, because There is no place for him. And so we can eliminate all possible causes of extraneous noise in headphones.
However, we can start with the easiest and most obvious potential causes of interference in the headphones, and there is a check of their result, we will not have the result, we will only hope that in the future this problem is self-sustaining. For example, the neighbors turn off the perforator, or after a while you buy a voltage stabilizer through which the computer is connected.
So, let's start searching for the cause of hissing in headphones.
Cable damage - very frequent cause of hissing and cod in headphones
Let's start with the simplest and most common cause of extraneous noise in headphones - a damaged cable or bad contact in the nest.
Carefully consider the headphone cable, it must be absolutely whole, it should be the same density inside inside. Spend the entire cable with your hands, perhaps in some place inside the cable was interrupted or once you beat the cable too much and the copper veins inside it broke off.
If, after a visual and tactile check, the cable does not cause suspicion, check the Jack, its articulation and the audio accession itself, in which you connect headphones.
Check out how well you insert Jack into the nest, it must come easily, with a slight click and keep it firmly. Jack should be in the nest to the end, should not be visible part of Jack.
Sometimes, due to the characteristics of the structure of the nest of about 1 mm, Jack remains visible, but no more and the phenomenon is rare.
Bad contact is one of the most common causes of noise and cod in headphones. Wipe the Jack with a dry soft cloth, it may be contaminated or covered with a layer of oxide.
If the wire suspicion does not cause and jack to the nest plugged, and the noise remains, you need to continue the search.
Technical condition of headphones - the possible cause of white noise
After checking the wire and Jack did not give the result, it is necessary to check the headphones themselves.
Carefully inspect them, perhaps recently they fell on a solid surface, cracks or other traces of damage appeared on the housing.
Be sure to try to connect headphones to another sound source, such as telephone, TV or tablet.
It is very important to understand and establish that the cause of white noise in the headphones is not the headphones themselves, but the device to which they are connected.
If, when connected to another device, white noise disappeared, it means that the headphones themselves are in order together with the wire and jack, and we go to the further search for the appearance of a cod.
Cheap columns can cause noise in headphones
If noise in headphones occurs when connected to a computer or laptop, to which inexpensive multimedia columns are connected at the same time, try to turn off the speakers and check whether the interference in the headphones disappeared.
The fact is that inexpensive columns They are collected from cheap elements, but most importantly - when they are assembling, they are much saved on soldering, wires and the overall design level. Therefore, inside the columns may occur bad contact or closure, which will distort the interference electric chainAs a result, outside the headphones may appear.
The speakers need to be turned off completely, and not only turn off their power.
If the full disconnection of the speakers from the computer did not help eliminate the noise in the headphones, go to the next step of finding a fault.
No grounding - the most common cause of interference in headphones when connected to a computer
For some unknown, the reasons for me in many homes do not have grounding. In general, it is not so scary, traditional household appliances, such as irons, heaters, filters and air conditioners work normally. But it costs to connect equipment unnecessary power grid, which is very sensitive to the quality of the power supply, as problems immediately come out.
The computer connected to an uncontrolled outlet is direct expensive not only to noise in headphones, but also possible reason The computer output is entirely due to the impact on it of static electricity.
A normal way to solve this problem is to ground the socket to which the computer connects. But it is not easy to do it, if at all possible. For this you need to call the electrician, however, in this case, most likely, it is most likely to shift the wiring across the apartment, and this is already a serious repair.
There is a simple way to check whether the ground will help eliminate the noise in the headphones - throw the wire from the computer to the battery.
You need to take the usual copper wire of a small cross section, from two sides with bare contacts. One end to lean to the computer housing (preferably to the back of it), and the other to the battery. To lean the wire to the painted part of the battery is useless, you need to lean to the metal of the battery, so you have to search for such a place. Usually naked metal can be found on the rear of the battery.
If you did everything right, and the noise left or significantly decreased, it means that the matter is grounded.
Remember: You can not ground through the battery to consider a constant solution. Such a grounding can lead to a complete failure of the entire computer, only your neighbor grounds serious equipment to the battery, like a computer, having received a powerful discharge of electricity to the body, will fail. This is only a method of checking, no more.
But what to do if you know exactly that the sockets have a grounding, and the check with the wire did not give anything? We continue searching the cod in the headphones.
The noise from the microphone is one of the many reasons for the occurrence of interference in headphones.
We looked at possible sources of noise problems in headphones that concern material intervention, now we have problems that relate to the configuration of computer equipment.
One of the most common causes of noise in the headphones is the noise from the microphone sound card.
Even if the microphone is not connected to your sound card, noise from the microphone socket can occur.
In order to check this hypothesis, you need to go to the sound of the sound of your audio card, find the slider that adjusts the volume level of the microphone and reduce it to zero. Either, if there is such an opportunity, turn off the sound from the microphone.
If the cause of noise in the headphones was a microphone input, then the disconnection of the sound from it should be fully corrected.
In order to get to the microphone volume settings, open the control panel, find item "Equipment and sound" And go to it.
Now find item "Sound" And go to it.
In the Sound Settings window, go to the tab "Record"then find an active microphone (in my case this is the Sound Blaster ZXR microphone), select it and click on the button. "Properties" in the lower right corner.
In a new window, find the tab "Levels", and either slide the microphone volume slider as to the left as possible until its value takes the zero indicator, or press the blue speaker icon, which is located to the right of the volume level. Near the speaker should appear a red crushed sign. This icon will mean that the microphone is completely disabled in the system. It is preferable to disable it, and not just reduce the volume level.
One of the varieties of problems with the microphone entrance or the microphone itself is its high sensitivity. This problem can be solved by incorporating the microphone noise cancellation mode.
Almost all modern sound cards have such a mode. If you find out that the cause of the cod is a microphone, but it is needed, then try to turn on noise cancellation mode if it is. This should solve the problem.
The problem with the volume of sound sources in the sound card may cause hissing in headphones
Not only the interference of the microphone can cause hissing in the headphones, the same interference can also give the adjacent audio card inputs.
Depending on the sound card model, it may have additional inputs for connecting additional equipment. They can wear the following names:
- What u hear
- Line In.
- S / PDIF.
Any of them can become a source of interference at a certain coincidence. Similarly, as you have reduced the volume of the microphone, you need to reduce or completely disconnect the sound from all these sockets.
To do this go to the panel windows management.
Then find a point there. "Equipment and sound".
Then click on the section "Sound".
In a new window, enter the Playback tab, select Active Speakers (a device that reproduces sound in headphones in this moment) And click on the "Property" button.
Next, I can't make a screenshot, because In my case, the volume level of all inputs and outputs is adjustable via a special software that controls my sound blaster sound card, in your case, most likely the tab will be available. "Levels"When you enter which you can disable all inputs and outputs of your sound card.
To check, leave only the output to the headphones, and all other possible outputs and inputs, disconnect or reduce their volume to zero.
If the problem of hissing headphones was in one of these items, it will have to disappear.
The volume level is paradoxically, but the fact, it can be the cause of interference in the headphones
In some cases, the volume level may cause interference in headphones.
Sometimes it happens that the headphones have their own volume control, plus there is an additional volume control in Windows, and there is still a volume control knob in the application, the sound of which you listen to (play, player).
In order for any equipment that has its own hardware volume control, it is good, it is necessary to make all the volume control regulators (especially the main volume slider in Windows) were 100% installed. And the final adjustment of the volume is using the hardware volume control.
To resolve Hissing, follow these steps:
- Fully disconnect the sound in the headphs using a hardware regulator (buttons or twisters on the headphones themselves)
- Volume in Windows 100%
- Set the volume in the application 100%
- Start gradually add volume on headphones and bring it to a comfortable level.
The fact is that the volume control regulators artificially reduce the volume of the sound, and then in the headphones you have to unscrew the volume to the maximum to listen at a comfortable level. However, for any technique, be it headphones, columns or car engine, long-term work on the limit possible is extremely destructively reflected on the characteristics and properties of the unit.
When setting the maximum volume with hardware on headphones, you strengthen the entire noise that comes from the computer, plus add distortion that appear in the headphones themselves at the maximum sound level.
Therefore, you need to adjust the volume by the method that I indicated to minimize possible distortions and noise from the headphones themselves, as well as remove the artificial increase in unwanted noise.
Imagine the situation, you bought new excellent headphones, but when you have connected them for the first time and started listening to the sound was just awful. But as possible, because in all the reviews that you read before buying, journalists and bloggers wrote that the headphones are great.
Let's wonder the somewhat most common reasons that make even the best headphones sound awful.
Headphones sound too quiet
You bought headphones, connected them to your compact player or smartphone, and they sound quiet and the sound is inexpressive, flat. It's all about the disadvantage of nutrition. Many headphones impose an increased demand for sound source, which is why there are special labeling on headphones that they are compatible with smartphones. If there is similar labeling on the headphones, then the manufacturer created them specifically to work in a pair with a smartphone. And if there is no marking - no one will give you a guarantee that the specific model of headphones will be perfectly compatible with compact sound sources.
The main parameter to which you should draw your attention when choosing headphones for mobile use - Resistance. For smartphones and players, it is not recommended to choose headphones with resistance above 32 ohms. Yes, some phones are able to dig headphones and with greater resistance, sometimes up to 60 ohms, but there is no guarantee that you are lucky. Therefore, when buying, you pay special attention to this parameter.
In general, it is believed that the higher the resistance of the headphones, the cleaner they can reproduce the sound. But remember that this feature is important for home listening, where there is no outsided soundsIn stock There is a special amplifier for headphones. In this case, you can really catch the difference in sound. But we are talking about headphones for your phone and listen to them, most likely, on the street, in transport or in the sports hall. Therefore, you have no reason to chase headphones with high resistance, it simply does not have a practical meaning.
Solution: Portable Headphone Amplifier
If you firmly decided that you need an uncompromising sound in any situations and bought high resistance headphones, you need a portable headphone amplifier. Such an amplifier does not occupy a lot of space, it can be easily wearing with me. Although, of course, you need to envisage where you put it.
Just be sure to look at the specifications on any amplifier you buy, and make sure that the number of "output resistance" in the specification is less than 1/8 of the headphone resistance that you want to use. In this case, you will achieve perfect sound.
Houses headphones sound excellent, but in the subway and transport it is impossible to listen
Must disappear, but the headphones are not here. If you listened to their homes, you liked the sound, and in the subway you noticed that this is not a sound - and not digestible noise porridge, the headphones are not here. Human hearing is to blame.
Like any microphone, our ears are not perfect. The fact is that our ears capture that sound that sounds louder than the other, especially this effect is noticeable if the frequencies of these sounds are close or coincided. In this case, you will hear that sound that sounds louder. Nothing can not be done with that.
Solution 1: Avoid places with high levels of background noise
This is an obvious and simple solution, it is a pity that in most cases it will not suit us. After all, you need a subway to get to work or study, and for the sake of songs in headphones it is silly to use another type of transport.
Solution 2: Block the outer noise
This is one of best decisionsI can recommend you. There are several ways to drown out external noise to better perceive music in headphones:
- Use intracanal headphones with foam empty. Such headphones can significantly reduce the level of external noise. Fully, of course, it will not be possible to exclude it, but you will at least start listening to music, and not noise wheels in the subway;
- If you use open-type headphones - stop doing it. Open-type headphones are not isolation from the outside world, try moving on a closed type headphones with a high level of passive noise insulation. About what headphones you will suit the most you can find out by reading the review or reviews on specific model, other solutions, unfortunately, no;
- Use earnings with active noise reduction. I think this is the most efficient and simple way out. Modern headphones with a system of active noise reduction are very well protecting you from external noise, the leader among such headphones is the model of the BOSE. There are similar systems and other manufacturers, but on my experience, the BOSE model most effectively coped with this task. In addition, most often such headphones are wireless, which means you will not only be nice to listen to music, but also convenient, because There will be no interfering wires.
Solution 3: Increase the volume in the headphones
Do not do that! Technically, if you make the volume of music in headphones above, you will hear it better. But you also significantly increase the likelihood of damage to your hearing, and it will be impossible to restore it. In the subway, you will not be able to adequately appreciate the volume of music, which will be high enough to shut up the sound of the car, but not sufficiently loud, so as not to harm your hearing. Therefore, I recommend you configure and remember the maximum level of volume in the headphones in a quiet environment. For example, put the headphones at home, and start increasing the volume on the phone. On the screen you will see the volume slider. Remember its position when the sound will seem loud and not comfortable, and never exceed it. In the subway you may seem that the music is playing quiet, but looking at the volume slider on the screen you will easily understand that it is not necessary to raise the volume above. It is better to drive a couple of stations without music in general than to suffer from a hearing impairment.
Bluetooth Headphones sound bad in a pair with my phone
Many modern manufacturers Phones begin to refuse traditional Jack for headphones. They do this for various reasons, but we, as consumers, remain only one thing - use Bluetooth headphones. Yes, it is much more convenient than wired headphones, because No wires and does not interfere with the use of at the same time the phone and listen to music. Although, for convenience you need to pay - regularly charge not only the phone, but also headphones to it.
The difficulty in choosing wireless headphones is that there are several profiles for transferring music from the phone to the headphones on Bluetooth. We can assume that these are different languages. When you connect headphones to the phone, these profiles are reconcilized, and only those that are supported simultaneously with the phone and headphones are used. It is for this reason that you may notice the difference in playing music with one headphones that you connect to different phones - It all depends on the profile. Today, the highest quality is the APTX profile. Remember that it should support both the phone and headphones. Unfortunately, not all phones are used, even modern flagships may not know about it. A sad example is a Google Pixel.
Solution 1: Carefully examine the supported phone and headphone profiles.
Before buying wireless headphones or phone, read in reviews on sites or instructions for the device, which profiles wireless transmission They support data. If you want to get the highest possible quality, make sure that both devices support APTX profile.
Solution 2: Check the battery charge level
Sometimes wireless headphones can start worse to work with a low battery charge. Fully charge headphones and phone to get best quality Sound.
Solution 3: Always update your phone
We live in a complex world, and the production of electronics is a double difficulty level for any manufacturer. Sometimes, after the release of a new phone, not all errors software Eliminated. So regularly check whether software update Your phone. In some cases, timely update can correct errors in wireless communication And the quality of music transfer can improve significantly.
And where is Bass?
Quite often, I ask the same question: "Why did I bought expensive headphones, and they play bad?"
I have an answer to this question, but you may not like it.
So, let's start with the fact that every person hears the sound in its own way. It depends on both the physical structure and the shape of your ear shell, the ear canal and the sensitivity of the eardrum, and on which sound you are used to listening, and what kind of sound you would like to hear.
Professional and expensive headphones manufacturers try to do so that they, if possible, all audible sound frequencies played with the same volume. But even if the manufacturer succeeds - your hearing is not so clear. Each person perceives different frequencies with different volume. And even more so, in men and women, there are different sensitivity to different frequencies of sound, for example, women's ear perceives high frequencies in women, because Evolutionarily they are predisposed to hear a child's crying. Men are better perceived by mid frequencies.
It is for this reason that there are so many manufacturers of headphones on the market today, and each manufacturer has a large line of a variety of headphones, both by the forms of the factor and on the configuration of their sound. And then I can advise you only one thing - you need to listen to the headphones yourself before buying.
Therefore, even professional expensive headphones may seem bad if you are accustomed to music, where many bass, or medium, or high frequencies. You want and accustomed to listen to the vocabulary music, and there is nothing wrong with that. You just need to consider it when buying new headphones. Remember, you need not expensive headphones, but those that like you like the most and not always correlated with the price.
Solutions 1: Read a lot of reviews
If you decide to buy some headphones - look not alone and not two reviews on them, and more. It is desirable to find everything. Because the entire meaning of the review in how headphones evaluates a particular person. I think you have already noticed that on one site a journalist or blogger praises headphones, and on the other hand, they write that they are bad. And you probably think that those who praise - sold? But in fact, everything is more complicated - journalists, too, people and rumor they have different. Therefore, one sound of headphones can appeal, and there is no other. That is why you need to read all the available reviews, and repel from the opinion of the majority. So you minimize the risk of buying bad headphones.
Solution 2: Use Equalizer
This is a simple advice, however, in very many cases it can solve your problem. If you use the phone as a sound source - use the equalizer if you do not like the sound in headphones without it. But remember that the equalizer must be tuned carefully. Try slightly strengthening or loosen the sound of those frequencies as you like more. But do it gradually. After each change, listen to music, at least a few minutes. Listen to different songs, different performers, different genres. If the settings in general worked well - continue to configure further. And so every time. Only so you can configure music under your ear and your headphones so as not to spoil her sound, but improve. And remember that when changing headphones, you will have to configure the equalizer from the very beginning.
By the way, the good headphones are good, so it is a more even response. So, it will be easier for you to set up an equalizer for yourself. But this rule is also not always working, and before buying even expensive headphones Try to find their accommodation Chart, to approximately imagine how they will sound.
Get more and more distribution. Pushing the manufacturers of smartphones themselves, eliminating the 3.5-millimeter audio jack from the new models. Everything would be fine if not one "but". The sound quality in wireless headphones is most often medium or even low. And the user may encounter a sound latency in Bluetooth headphones. What caused these two troubles? Surely large companies still can't come up with a normal method of transmitting sound through air?
If with the average quality of sound, it is quite possible to terms, then when the music is interrupted - it quickly displays. These second or even semi-acean pauses make it back to wired headphones, connecting an accessory at least through the adapter.
Unfortunately, to find out the exact causes of the micropause almost impossible. The fact is that Bluetooth is very different from the same Wi-Fi - this method of transmitting the signal is less standardized, and there is often not enough power to be "Blue Zeub". If Wi-Fi quietly penetrates even through the walls of the house, then the Bluetooth signal can also interfere with the lining of the jacket. That is, try to pull the smartphone from the inner pocket - it is possible that the sync cleanliness will significantly improve.
Unfortunately, he derses sound in Bluetooth headphones and then when the accessory is right next to the smartphone. This indicates the low compatibility of the chip in the headset with the module located in the phone. It is possible that the latter is used by some unsuitable codec. After all, if you did not know, no analogue is transmitted by air, and digital sound. Headphones still need to be decrypted, only after that playing. If the electronics in the product is not the most powerful, then from time to time, micropauses can really occur.
If the purchase of Bluetooth headphones is only to be, then be sure to read technical characteristics Accessories. Try to choose such an instance that has supported precisely those profiles that are built into the Bluetooth of your smartphone. It is also desirable that the version of the "blue tooth" was also the same. In particular, now many smartphones have on board Bluetooth 4.0 - a similar version should have a wireless headset.
If the headphones are connected to the computer, you can "fold" with the settings of music players to remove the audio interrupt. Change the sound output from the DirectSound on Waveout - sometimes it can help. Unfortunately, in the smartphones, the Bluetooth-connections settings are noticeably less, so it is impossible to favor experiments here.
Bad sound
The quality of sound depends on several factors. Basically, this parameter affects the Bluetooth version. In each fresh version, some new profiles and technologies appear. For example, now smartphones and wireless headsets are gradually moving to APTX HD codec, providing sound transmission in hardly CD quality. If you are not limited to financial resources, it is better to purchase an accessory with support for this codec. But do not forget that then the smartphone will need the appropriate.
The sound quality depends on which music files are reproduced. Pay attention to the MP3 Music Bitrate - the best sound will be with files with a 320 Kbps parameter. The real music lovers must go to files with a lower compression degree - for example, on FLAC. Weighing such music will be more, but when it is saved to these compositions, too high or too low frequencies. However, an increased bit rate can lead to micropauses - Bluetooth data transfer rate is strongly limited.
Of course, first of all, the purity of sound depends on the design of the headphones themselves. Stupid to expect good sound From the simplest "plugs" for 2000 rubles. Want to enjoy music without using wired connection? Then you will have to fork out for an expensive headset from the well-known manufacturer. Difficult to choose from? Focus on the selection.
Conclusion
Alas, but modern wireless technologies that serve to transfer sound, do not somehow play the settings. If some problems arise, it most often talks about poor compatibility of headphones and smartphones. And in the case of not good sound, it is necessary to blame the underdeveloped design of the headset (or a weak chip). That is why when choosing wireless headphones should not save.
Connecting any device to a computer is a process that requires special attention. The harder the peripheral component, the more difficult the procedure proceeds. Extreme often to computers include headphones / columns and microphones. These elements help communicate on the Internet. Without them, it is very difficult to submit a modern user.
On the one hand, the connection of headphones and microphone does not require anything special. Only after the embodiment of ideas in life, it is often necessary to customize the data for a long time. They work with errors. Most often, users think about how to remove the noise in the headphones on the computer. Why does he appear at all? What will required to eliminate the problem? And is it possible to actually get rid of it? If it turns out to answer all asked questions, the connection of the headset and the work with the sound on the PC will not deliver trouble.
Why noise appears
It is initially important to understand where noise in headphones come from. Many users face this problem. Sometimes it is a temporary phenomenon, in some cases noise does not disappear for a long time.
In fact, the nature of the problem is diverse. Noises in headphones (with or without or without microphone) arise for various reasons. Predict exactly which alignment helps to correct the situation is problematic. For example, noise can be caused by hardware damage or shot down settings. Next to figure out how to get rid of noise on a computer.
Sound card
The first reason that can affect the sound quality in operating system - It's bad if it is damaged or outdated, noises appear in the headphones.
The sound "breaks", a variety of cracks, creaking and other noises can appear in headphones or columns. The situation is fixed only by replacing or repairing a sound card. Only after that in the headphones will disappear.
Ground
The next problem occurs quite rarely. We are talking about the lack of grounding of sockets to which the headset and columns / headphones are connected in general. In this case, different kind of noise may appear.
If we are talking about a laptop, most likely, the connection to the grounded outlet will not fix the problem. As a rule, laptops are board for mother card may not ground. We'll have to either replace them or come to terms with the problem. In some cases, users prefer to abandon the use of a laptop.
USB devices
There appeared noise in the headphones on the computer? Typically, different kinds of sounds occur when a variety of devices are connected. They appear immediately, not after some time.
For example, when connecting the mouse, you can hear a monotonous sound. And if we are talking about the keyboard, most likely, clicks will be heard when you press the keys.
This is due to:
- Active information transfer to the computer. Then it is recommended not to connect USB devices to those or other ports. It is advisable to find other places. Or at all start using wireless headsets and other devices.
- USB port damage. It is proposed to be fixed. In practice, users simply reconnect all devices to other ports.
Fortunately, this situation is not very common. Modern computers and laptops are made so that users can work for machines with comfort. Therefore, this alignment is unlikely to meet in practice.
Cable
How to remove noise in headphones on your computer? Much depends on what exactly the headset model of the user. The thing is that now all devices are divided into wired and wireless. This feature plays an important role.
Often, noise in columns or headphones is found on models connected via cable. It lies the main problem. For example, during the damage to the cable from the microphone or headphones there are different kind of noise. This is due to poor quality information transmission sound card.
It is likely that the cable is damaged. Then the breakdown must be eliminated. If the wireless, such alignment does not help.
Another technique that advise users with a wired headset is to remove the cord from the socket and insert it to the computer again. It is this way that it often helps to get rid of noise.
Drivers
But the next source of the problem is relevant for all devices. But in practice he is rare. The point is that strong noise in the headphones on the computer is a consequence of damage or lack of a sound card driver or device.
In this case, it is necessary to simply reinstall or update the appropriate software package for the normal operation of the operating system with the connected device. With wireless headphones, as a rule, the corresponding drivers are included in a separate disk. In the extreme case, you can download them from the site of the manufacturer of a sound card or headset.
Maximum sound - problems are provided
The background noise in the headphones of any models is often found with incorrectly set audio settings. It does not matter whether the microphone is connected to the PC or not. After all, it does not depend on it with a similar situation.
If sound settings are set to maximum, you can encounter noise or wheezing on your computer. Users suffer from such a problem who bought cheap columns or headset.
It is fixed simple - by reflecting sound. For example, through a mixer in the operating system. You must simply click on the image of the gramophone (about hours and date), then move the slider down. So that noise disappears. Nothing hard or special. That is why it is recommended to buy middle at the cost of headphones. They come up with a similar problem less often.
Microphone - benefit or harm
Now it is clear how to remove the noise in the headphones on the computer. But these are not all techniques that can help. What to do if all previously listed development options have not come up?
An important role is played by the presence of a microphone on a PC. It is he who often becomes a source of noise in headphones. What to do?
It is not clear to refuse the microphone. Instead, you will have to make a small sensitivity setting and volume of the device. Then it will be possible to get rid of excess noise.
How to do it? It is required to follow a small instruction. It looks like this:
- Download computer. Be sure to connect the headset with the microphone.
- Press the mixer on the right side of the PCM screen. In the menu that appears, click on "Sound Recording Devices ...".
- Find a connected microphone. Double-click on the appropriate string.
- Go to the "Levels" tab.
- Adjust by moving the slider volume and microphone sensitivity. If there is a PC Beep, disable it (shift the volume mark to zero).
- In the "Improvements" section, put a tick on the "Reduce noise level". You can also mark the item "Remove the constant component".
All this will help quite quickly get rid of noise in the headset. How to set the settings for the microphone? This is an individual component, each user independently selects the appropriate option.
Conclusions and conclusions
It does not matter what kind of headset is connected to the computer - wired or not. The main thing is that the bulk of the problems is found on all models of devices. For a computer with a microphone, connected and used most often without much difficulty. And the main reason for noise in the headset is the high sensitivity of the microphone, as well as the really loud situation around the user.
How to remove noise in headphones? All listed techniques will help to correct the situation. If we are talking about wireless headset, With constant noise, it is recommended to change the USB-jack used as a receiver. Otherwise, all the previously listed tips remain the same.
Foreign noise in headphones occasionally arises due to infection with viruses. After curing the computer, the headset begins to work properly. Fortunately, this kind of events are not so frequent. And the main methods of struggle with the problem being studied is to reinstall the driver, reduce and adjust the microphone. From now on, it is clear how to remove the noise in the headphones on the computer.
Despite the technological achievements, Bluetooth headphones still suffer from some unpleasant problems.
We looked at the most common problems of Bluetooth headphones and found several solutions.
My smartphone can not find Bluetooth headphones
You want to connect headphones to your smartphone, but for some reason headphones are not displayed in the list of Bluetooth devices? Here is a list how to solve the problem:
- Check if you enable Bluetooth connection on your phone. Surprisingly just skip.
- Check whether your headphones are compatible with your device and OS. If you are using iPhone, it should work at least on iOS 7, which originally supports Bluetooth Smart Ready. If you are on Android, make sure it works at least on Android 4.3.
- Make sure your smartphone and headphones are close to each other when you want to connect them. The best way to ensure a good connection is to bring the devices not less than 50 cm from each other.
- Check the manufacturer recommended by the manufacturer. Not all bluetooth headphones will connect to your phone in the same way; Sometimes it is just as easy as just turning on the headphones, in other cases it is a little more difficult. To avoid problems with the connection of your device, carefully read all the detailed steps about what you should do.
- Try turning off and turn it on again. This is an old method, but let's take the truth in the eye - sometimes it really works.
- Turn off or remove all interference. Perhaps for some reason your headphones are trying to connect to another device, and not to your smartphone.
- Get off from the Wi-Fi router. Perhaps yours wi-Fi router Uses the same spectrum as headphones, and thus causes some interference.
My Bluetooth headphones are periodically disconnected
There is nothing more disappointing than listening to music when suddenly your bluetooth headphones are simply disconnected. Sometimes the Bluetooth connection is completely disconnected and makes you connect again, at another time it will disappear for a few seconds before it connects. These problems are easy to solve:
- Stay within the range of your headphones and smartphones. It is very easy to move away from the smartphone and bluetooth will not work.
- Remove all unnecessary Bluetooth connections. It is possible that your smartphone is "overloaded" by the number of attempts to connect to it.
- Make sure your Bluetooth headset is charged. Bluetooth headphones tend to a periodic disconnection with a low battery charge level.
- Try to turn off the headphones, and then connect them again with your smartphone.
The connection between my headphones and smartphone works unstable
It also often happens that when you are trying to connect your headphones and smartphone together, you either get an error message, or the dispenser process will work unstable - without actual remediation. The simplest solution here:
- Delete all unused or unnecessary Bluetooth connections. Some devices begin to hang if there are too many devices in the Bluetooth connections list.
If it does not help, you can try any of the other ways that we have already indicated.
I hear noise in Bluetooth headphones
Despite the long way, Bluetooth technology is still susceptible to interference, such as static or crackling noises when you listen to music.
- First, you must disable or turn off other unused bluetooth devices in this district.
- If static will not disappear, try to reboot your headphones (you can easily understand this by contacting the manufacturer's site).
- Turn on the media player, then turn off the headphones for 30 seconds, and then connect them again.
- Reduce the distance between your smartphone and headphones, as it also helps to reduce (or even decide) any problems with noise.
All this proven methods for solving some of the most unpleasant bluetooth problemsbut this is not full list. If none of these troubleshooting methods work, it is better to contact the manufacturer.
Have you tried any of these methods to troubleshoot problems with Bluetooth's own devices?
