When working with some applications. This can happen when many applications are open right away (which puts a heavy load on RAM). Especially if you quickly switch and collapse them with your fingers.
In many cases, users have no idea how to restart the iPad. It also happens that a turned off tablet does not turn on by standardly holding down the Power button. We suggest that you consider the main methods of rebooting, as well as some alternative options when system recovery is required.
IOS standard reboot
The standard way to restart the iPad comes in handy when the system crash is minor. To do this, just hold down the Power button and hold it for a few seconds. Then the screen is darkened, a slider with the words "Close" will appear on top. You just have to swipe your finger.
In some situations, holding Power and switching to such a window is enough for the iPad to "come to its senses." In this case, there is a Close button. Click it first. If the problem is solved - there is no need to turn off the tablet.
Turn off the iPad, wait for it to clear rAM, the screen goes blank completely. If it warmed up from use - wait a bit. Then turn on the tablet while holding the same on / off button on top of the case.
Hard Reboot
This reboot option is suitable if the iPad does not respond to any of the commands. Hold the Power and Home buttons simultaneously. You must wait 10 seconds. After that, the device should turn off. To turn on, just hold down the Power button and the iPad will work in proper mode.
Using a hard reset does not have to be permanent. Do not use this method for any problems with applications. Otherwise, you only hurt file system devices.
Reboot with iPad Recovery
If your iPad freezes how to restart, you don’t know and it has many hints of poor performance - you can try to completely restore the tablet. After this procedure, there will be two options:
- You will restore the iPad version from the backup you backed up;
- You will use the tablet from scratch, as new.
To do this, turn off the gadget in an acceptable way (see above). Thereafter:
- We connect iPad to the computer. You do not need to turn on the tablet.
- Open iTunes (the version of the program should be fresh).
- Press the Home button on the tablet and hold it.
- Follow iTunes directions, click "Restore iPad".
- We are waiting for the recovery to complete, then we select the option to use the iPad.
These methods will help you quickly restart your iPad. Tablet recovery is recommended in cases where it has a lot of extra applications, their cache. It happens that the memory is occupied by unknown data. Even by deleting programs and all files manually, you cannot restore the proper amount of free space. Recovery solves all problems.
Hello, dear user, no, happy (I say, then that I myself am so) the owner of an iPad tablet computer or an excellent iPhone smartphone. In today's short article, I will tell you how to restart the iPad or iPhone, and to do this as quickly and easily as possible.
In fact, rebooting any device is just turning it off and then turning it on. With devices based operating system iOS is exactly the same picture. Why, in fact, need to restart the tablet or smartphone? There can be many reasons, for example: you made any changes in the device settings and in order for the changes you made to take effect you need to restart the device. Or maybe your iPad or iPhone just crashes, and the best remedy for freezing is rebooting.
So, the instruction is how to restart your iPhone or iPad. The instructions below are suitable for all Apple iOS devices; the version of the operating system does not matter.
System reboot process
Follow the steps below to reboot your device’s OS:
Here is such a simple procedure. Now you know how to restart your iPad or iPhone smartphone, and I dare hopefully I partly contributed to this. Comments on this, small, instructions are welcome.
“If the iPad hangs, what needs to be done to make it work again?” - such a question arises from the owners apple tabletswho suddenly realize that they, too, are not immune from the unstable operation of the device. In fairness, similar problems with the iPad are very rare. However, it may still freeze when you launch the application, update, or turn it on.
Forced process termination
If iPad falls upon launching the application, does not respond to touch, the program itself does not turn off, then do not take radical steps like rebooting the device. To get started, try forcibly terminating the hung process:
- Double-click the Home button to display a list of running applications.
- Swipe up a program that is stuck.
How to close all applications on iPad
If the application does not look like, because the screen does not respond to swipe and tapas, then use another way to force the program to terminate. What do we have to do:
- Hold down the power button and hold until the “Turn off” window appears.
- Release the power button and hold down the Home key for 5 seconds.
If these actions do not help bring iPad to life, then you will have to use other methods - in particular, rebooting.
Reboot iPad
A standard reboot, which is turning off and then turning on the device, will not help here, since the screen does not respond to touch. Therefore, you need to do a hard reboot. Do not worry, personal data will not be lost, all information will remain in the memory of the iPad.
Making a hard restart is very simple: hold Power and Home and hold them until a full reboot, that is, the appearance of a white apple.
During the reboot, the RAM is cleared, so the errors that led to the device freezing will be eliminated.
Re-flashing the device
If the iPad hangs on an apple, does not turn off and does not turn on, then even a hard reset will not help to fix the problem. In this case, you need to do device recovery via iTunes. But before proceeding with recovery, make sure that you have backup copy data, because during the operation, all information from the iPad will be erased.
If the backup is ready, then you can begin to restore the device. First try to execute it in mode Recovery mode:
- Launch iTunes, connect your iPad with a USB cable.
- Click Restore iPad.
iTunes will find and start downloading on its own desired version firmware. You can speed up the recovery process if you first download the firmware to your computer. To select it, click on the “Restore” button, having previously pressed the Shift key.
iPad user data recovery via iTunes
If Recovery Mode cannot be restored, put the tablet in DFU mode.
- Connect your iPad to a computer running iTunes.
- Hold the Power and Home keys for 10 seconds.
- Release the power key and hold Home until the following message appears in iTunes:The recovery process in DFU is the same as in Recovery Mode: you need to click "Restore" and wait for the download and installation latest version iOS
If you are reading this article, then you should be wondering how to restart the Apple iPad if it freezes.
The Apple iPad is a high-end device, the best in its class, but even problems like freezes happen. Today, two methods are known to restart the iPad: one in normal use, and the second when the data and tablet files become unavailable, and the graphical interface does not respond.
The last reset method is actually the first diagnostic step that precedes the use of serious recovery tools. Using this method of restarting your Apple iPad does not guarantee that the latest results of your work will be saved. If at the time of freezing the tablet you typed text Document, there is a risk of losing it, but on the other hand it will not compromise the rest of the files on your iPad.
- Find the “Sleep / Power’ ’” button located on the top of the iPad and hold it for a few seconds.
- Locate the “Turn off device” slider slider that appears on the iPad screen.
- Use your finger to move the slider in the opposite direction. This action will turn off the iPad.
- To download the tablet, press the “Sleep / Power’ ’” button at the top of the iPad again. This will turn on the device.
IPad restart if interface freezes
- Find the Sleep / Power ’’ button at the top of the iPad and the Home button below the screen when the tablet is upright.
- Hold both buttons until the screen saver appears and the screen turns black.
- Press the Sleep / Power ’’ button on the top to restore power to the device.
Like these simple ways You can restart the iPad when it freezes.
Sometimes an iOS device freezes and newcomers are constantly faced with a problem: How to restart iPhone, iPad or iPod touch? It would seem that the simplest operation, but, nevertheless, to explain how this is done is still worth it. And just this knowledge is useful in itself. There are 3 ways to reboot the system.
- Standard way
Standard way
In fact, in the usual way, you rarely need to reboot the device. But sometimes, in case of some glitches or before starting a heavy game, a reboot is required.
If you have an iPhone, iPad, iPod Touch that doesn’t hang, and you just need to restart it for one reason or another, then press the Power button until the slider with the word “Turn off” appears.
When the slider appears - move the slider to the right with a finger. iPad will shut down. Shutdown can last 10-20 seconds - you will see the shutdown status in the middle of the screen (a barely noticeable icon in the center).
Note: The Power button on all iPad and iPod Touch models is located on top of the device (single button). For iPhone, this button is at the top (iPhone 5S, 5C and older) or to the right (iPhone 6, 6 Plus and newer).
So, we take the device in hand. Push button Home (she is the only one on the front side) and at the same time a button Powerlocated at the top (iPhone 6, 6 Plus and newer on the right). We hold until a full reboot (the appearance of a white apple on the screen).
The device itself will turn off and restart.
The third way to reboot is the most ingenious - it is suitable for those who have a malfunctioning Power button, or for people with disabilities. A function that can be activated through: Settings-\u003e General-\u003e Accessibility-\u003e Asisstive Touch. As in the case with, there is a small life hack that allows you to restart iOS programmatically without resorting to physical buttons.
Launch the Asisstive Touch panel, then click on “Device”
