In order to access the network through a mobile operator, you need to configure the MTS Internet on your device. But today this is becoming irrelevant, as most mobile phones, smartphones and tablet PCs are automatically configured. In fact, all settings come down to specifying an access point (APN) from MTS. After registering the access point, you need to reboot and try to connect to the network.
But if for some reason the automatic settings are not installed, manual settings should be made. There is no need to write dozens of parameters here, everything is done extremely simply. In addition, in modern smartphones and tablet PCs, all settings are simplified as much as possible. In addition to prescribing manual settings, we will consider the possibility of ordering automatic settings from the MTS operator - they can be ordered on the website or via SMS, and then saved and applied.
In order to specify the MTS access point for setting up the Internet, we need to pick up a mobile phone and find where the APN is being installed. This is usually done in the settings menu related to Internet access. Here we create a profile with the name MTS Internet, specify the internet.mts.ru access point, specify the username and password (mts), turn off the proxy and do not use it.
By the way, the newer the phone, the less Internet profile settings it has. If we pick up some old Motorola, we will be surprised at the number of settings items. As for modern phones, everything is much simpler here. As for setting up smartphones, everything depends on which platform the device is running on. If we have an iPhone in front of us, then the access point in it is registered in the menu "Cellular data - APN settings". We indicate here the point internet.mts.ru, do not forget to activate the connection to the network using the appropriate switch, after which we send the iPhone to reboot.
In Android-based devices, the process of setting up an MTS access point is done through the menu "Wireless networks - More - Mobile network". Here we specify the access point, set the login and password, leave the rest of the data unchanged. After that, we send the smartphone to reboot.
As for smartphones with Windows Phone, here we need to enter "Settings - Data transfer - Add an Internet access point". Next, specify the APN - internet.mts.ru and login with a password (mts). All other points are left unchanged. But let's get rid of manual settings and try to order automatic settings. To do this, go to the MTS website, in the section "Help and Service - Settings - Phone Settings".
Here we indicate our number, enter the captcha and wait for the acceptance of the message with the settings. We save the received data, reboot the device and try to go online. Also, to order automatic settings, we can send an empty SMS to 1234.
The menu structure in smartphones may differ, depending on the version of the operating system used.
Setting up an MTS access point on a tablet
As for tablet PCs, they can run on Windows, Google Android and iOS operating systems. These are the same smartphones, only larger. If you need to set up an MTS access point on your tablet, carefully reread the section on setting up phones and smartphones - APN settings in tablet PCs are performed in a similar way.
Installing an access point on the modem
MTS modems already contain all the necessary settings for unhindered Internet access. In order to connect to the network, you need to install the modem in the USB port, wait for the drivers and software to be installed, and then activate the connection. But if we use a universal modem, then most likely there will be no settings in it. Therefore, we will register the MTS access point manually.
To do this, you need to go to the modem software settings, find the section with creating profiles, specify the name of the new profile there, register the internet.mts.ru access point, login and password (mts), as well as the dial-up number *99#. We save the profile, select it as the default profile, and then go online.
Some generic modems may have profiles already configured. Select the MTS profile, check its performance, and simply delete unnecessary profiles.
Mobile Internet provider MTS is one of the largest providers of Internet services in the territory of not only the Russian Federation, but other CIS countries.
The mobile operator provides GSM mobile communication services. In addition, with the help of MTS services, many users have access to the Internet on their android devices.
Usually, when you connect a certain tariff, Internet settings come automatically. But there are times when the device itself does not want to register on the network.
On a smartphone with the Android operating system, it will not be difficult to set up the Internet manually. This operation does not require additional knowledge and skills. All you need to do is follow the instructions and enter the required data very carefully.
Before entering the settings, make sure that you have purchased a SIM card with a suitable tariff, the package of which includes an Internet connection.
Let's start!
First you need to go to the corresponding menu in the smartphone settings. You need to follow the path: "menu" - "settings" - "wireless network".
In the window that appears, put a bird on the item "Mobile Internet". This will enable further access to the network. After that, go to the tab "mobile networks".
If you already have a profile "MTS internet" then just activate it with one click. If your device does not automatically find the provider, then we will act differently.
We go to the point "Create APN to create a new connection point". Here we will enter the MTC data. Type the characters correctly, otherwise the connection will not work.
In the graph "name" you need to enter MTS Internet. In point "APN" picking a domain address internet.mts.ru. In graphs "login" and "password" enter three letters mts.
That's all!
If the Internet still does not work, check if you have entered all the data correctly. You can also try restarting your device. In the event that it is not possible to set up the Internet on your own, contact the service center.
All MTS subscribers, purchasing a new SIM-card or phone, can use the Internet, receive or send SMS and MMS without setting up their phone.
How to get automatic Internet settings from MTS?
If you are unable to access the Internet or send MMS, order automatic mobile Internet settings on the MTS website by entering your phone number. The settings will be sent in a response SMS.
Is it possible to set up the Internet manually?
Yes it is possible. Below are typical GPRS/EDGE/MMS/WAP settings for most modern phones/smartphones/tablets.
Internet settings GPRS/EDGE.
MMS settings.
To use the MMS service, you need to go to the settings section of your device in the main menu and create a new access point with the following parameters.
| MTS MMS | |
| Home page | http://mmsc |
| Data channel (Data bearer) | GPRS |
| Access Point (APN) | mms.mts.ru |
| 192.168.192.192 | |
| WAP Port (WAP 1.x) | 9201 |
| WAP Port (WAP 2.0) | 9201 (8080) |
| Username | mts |
| Password | mts |
WAP settings.
To use the WAP service, you need to go to the settings section of your device in the main menu and create a new access point with the following parameters.
| Profile name | MTS WAP |
| Data channel (Data bearer) | GPRS |
| Access Point (APN) | wap.mts.ru |
| IP protocol address (IP address) | 192.168.192.168 |
| WAP Port (WAP 1.x) | 9201 |
| WAP Port (WAP 2.0) | 9201 (8080) |
| Username | mts |
| Password | mts |
What is the cost of mobile Internet from MTS?
Currently, MTS offers various options ("MiniBIT", "BIT", "SuperBIT") for smartphones, tablets, modems, etc. Learn more on the company's website.
How to set up a smartphone/tablet based on Android, iOS (iPad, iPhone) or other OS to access the Internet?
Settings → Wireless networks → Mobile network → Access points (APN).
Settings → General → Network → Cellular data network.
Write the following:
API: internet.mts.ru
Username: mts
Password: mts
Phone settings for use as a modem:
How to install the modem correctly?
When connecting via infrared:
1. Turn on the infrared port on your phone. Position the infrared port on your phone opposite the infrared port on your computer, within 10 cm.
2. Wait until the IR icon appears in the lower right corner of the monitor - the connection is established.
3. Then a window with the name of the phone will appear - the modem is installed.
4.
When connected using a PCMCIA modem:
1. Insert a PCMCIA modem with a SIM card installed into a special “socket” on the computer.
2. Wait for the message about the successful installation of the "Standard PCMCIA modem" to appear.
3. Start setting up your modem.
1. When connecting via cable or Bluetooth modem, you must install it manually:
2. Connect your phone and computer with a cable, or turn on Bluetooth on your phone.
3.
4. In the window that opens, select the "Modems" tab and click the "Add" button.
5. In the "Add New Hardware Wizard" window, check the box "Do not detect modem type (select from a list)" and click "Next".
5. In the "Install modem" window, click "Install from disk" and select from which disk (from which folder) your modem will be installed.
6. In the next window, select the desired modem (your phone model) and click "Next".
7. Specify which port to install the modem on (for example, COM1), click "Next".
8. After a warning about the incompatibility of the operating system and the modem, click "Continue Anyway".
9. Wait for the message "Modem successfully installed", click "Finish" and proceed to configure the modem.
How to set up a modem?
Before setting up the modem, make sure that the phone is connected to the computer.
1. Open on the computer: "Start" - "Settings" - "Control Panel" - "Phone and Modem".
2. In the window that appears, select the "Modems" tab.
3. Select your installed modem and click the "Properties" button.
4. In the Modem Properties window, select the Advanced Communication Settings tab.
5. In the "Additional initialization commands" field, enter the modem's initialization string: AT+CGDCONT=1,"IP","internet.mts.ru"(Attention! You must enter all characters without spaces).
Click "OK" - the modem is configured, proceed to setting up the connection.
How to set up a connection?
1. Before setting up the connection, make sure that the phone is connected to the computer.
2. Open on the computer: "Start" - "Settings" - "Control Panel" - "Network Connections".
3. Select "Create a new connection" - the "New Network Connection Wizard" will open, click "Next".
4. Check "Connect to the Internet" and click "Next".
5. Select "Set up a connection manually" and click "Next".
6. In the window that opens, check "Via regular modem" and click "Next".
7. Select your installed modem from the list and click Next.
8. In the window that opens, enter:
New connection name: MTS GPRS
How to get online?
1. Connect your phone to your computer.
2. Open on the computer: "Start" - "Settings" - "Control Panel" - "Network Connections" - "MTS GPRS".
3. In the "Connecting to MTS GPRS" window, click the "Call" button.
4. Wait until the "two computers" icon appears on the taskbar - the connection is established.
If you want to terminate the connection, right-click on the "two computers" icon and select "Disconnect".
Within the framework of this article, the MTS Internet setup on Android is described step by step. In most cases, this procedure occurs automatically when you turn on the device for the first time. The main advantage in this is the minimal impact of the user. But sometimes things go wrong. In this case, you need to do everything manually. This is a little more difficult, but still everyone can cope with this task, regardless of their level of training.
Automatically
A similar MTS on Android is the easiest. We install a SIM card in a smartphone or tablet and turn it on. After downloading, if necessary, enter the PIN code. After the final initialization of the new device, the operator software will start searching for the necessary parameters in its databases. When the necessary information is found, it will be sent over the network to the gadget. It will be enough for the subscriber to accept and save. After that, you can start checking the performance of this service.
Manually
It is not always possible to automatically configure the MTS Internet on Android. For example, the device is not certified for use in our country, or it is a completely new device, and the operator did not have time to enter the necessary data into its database. In this case, manual is simply not enough. The order of its implementation is as follows:
- We go to the address: "Applications \ Network Settings".
- Here we find the item "Mobile networks" and select "Access point".
- We create a "New APN".
- In the name field, enter the abbreviation of the operator - "MTS".
- APN should be "internet.mts.ru".
- Login and password are set to "mts".
- We call the menu and save the changes made.
The Internet setup on the phone or tablet will end after the reboot is done. It is not always offered to the subscriber to do this, but, as practice shows, it is better to do it anyway. To do this, simply turn off the device and then turn it on.
Checking
MTS mobile Internet settings are checked as follows. Enable data sharing. To do this, we call the drop-down menu from above and in it we click on the “Data Transfer” button (a rectangle is drawn on it with two arrows that are directed in different directions). Then you need to wait until the network services start and the IP address is obtained (the button should change its color). We launch any of the browsers (for example, Opera). Then the site address is entered (ya.ru or mail.ru) and enter is pressed. After that, the page from the Internet should load.
Results
Setting up MTS Internet on Android can be done in two ways: automatic and manual. The first of them takes place with minimal user participation, but it is not always feasible. In this case, everything is done by manually setting the settings. In the end, you need to make sure that the result is achieved. Do not forget that the account must have the required amount of funds. Otherwise, the service will not be activated. There is nothing difficult in this. Everyone can cope with this task. It is enough just to perform the previously described algorithm step by step, and everything should definitely work out.
Modern technologies make it possible to reduce the Internet setup in most smartphones, mobile phones and tablet PCs to just specifying an access point. Then you should restart the device on which Internet access is configured and connect to the network. There are exceptions, and automatic settings are not installed for some reason. In such cases, the settings must be made manually. The essence of setting up MTS access is very simple, and the procedure is simplified to the maximum.
It is possible to order receiving automatic settings from the MTS operator using an SMS message on the website. You just have to save them and apply.
Setting up an MTS access point on your phone
Find the menu item on your phone where the APN is set. Most likely, you should look in the settings menu that relate to Internet access. You need to create a profile with the following:
- profile name - MTS Internet;
- access point - internet.mts.ru;
- standard login / password - mts.
If you compare the number of settings for a new phone model and some old Motorola model, you will be surprised at how many fewer Internet profile settings there are in modern phones.
The platform on which the smartphone operates is the main criterion for how the access points will be configured.
Smartphones with Windows phone are configured in the menu, which must be entered in the following way: "Settings - Data transfer" and finally "Add Internet access point". Here, specify APN - internet.mts.ru, as well as login / password - (mts). The rest of the items remain unchanged.
If you have a platform Android, then you need to take the following "steps": "Wireless networks - More", and then the item "Mobile network". The entered data is similar to those described above: we set the access point, login, password. After that, restart the smartphone.
If you are the owner iPhone, then go to the menu "Cellular data - APN settings", write down the standard address internet.mts.ru. To correctly activate the network connection, use the appropriate switch and send the iPhone to reboot.
The easiest way is to avoid manual settings and try automatic settings. Find the "Phone Settings" section on the MTS website. To do this, go to the "Help and Service" item, and then "Settings". After specifying the captcha and the phone number on which access is configured, we expect to receive a message with the settings. We save the received data, reboot the phone. You can also order automatic settings by sending a blank notification to 1234.
Please note that the menu structure may differ depending on the version of the operating system.
Setting up an MTS access point on tablets
Tablets are the same smartphones, only larger. Tablet PCs run on the following operating systems: Google Android, Windows, iOS. To set up a hotspot on a tablet, carefully read how to set up hotspots on smartphones and phones. APN settings are made in a similar way.
Setting up an MTS access point on a modem
To connect the MTS modem to the network, you need to connect the modem to the USB port, then wait for the software / drivers to be installed and activate the connection. The simplicity of the procedure is explained by the fact that MTS modems contain all the necessary settings.
In a universal modem, there are often no settings. To specify the settings manually, go to the software settings and find the section with creating a new profile. There, specify the profile name, access point, login, password and another dial-up number *99#. After saving the profile, select it as default and log out.
If you are lucky and your modem has configured profiles, then select the MTS profile, check its performance. Unnecessary profiles can be simply deleted as unnecessary.
