What to do if Lenovo phone won't turn on?
If you are faced with such a problem that the phone does not turn on Lenovo - you need to carry out a small diagnosis yourself. And, perhaps, you can fix the malfunction with your own hands at home, without contacting a service workshop. Of course, this depends on the complexity of the damage, and therefore we suggest that you familiarize yourself with the most obvious reasons.
Full battery discharge
Due to non-compliance with the recharging mode, that is, when you continue to use the gadget at the minimum percentage of charge, the so-called deep discharge of the battery may occur. And then, when the phone is connected to a charger or PC, it will not show signs of life.
These devices simply do not recognize it, since the nominal value of the battery voltage has fallen below the minimum indicated on its label. Plug in the charger and leave it there for a couple of hours.
Charger, power connector
You need to make sure that the smartphone is receiving power from the mains. Examine the charger completely. The power supply unit, cord, cord plugs on both sides must not be visibly damaged. Check it out on another gadget. Examine the connector itself on the smartphone. Possibly phoneLenovo A319, A328, A2010, S60, A6010and other models does not turn on due to non-contact when recharging.
Battery
A failed battery will also cause the phone to Lenovo turned off and does not turn on. Some models have a removable back cover, while others need to be removed using a certain heating and peeling technology.
But it is necessary to inspect the battery and check its nominal voltage. You can contact the service for servicing smartphones Lenovo where experienced specialists will accurately determine the cause of the defect.
Firmware, update
Often, due to incorrect operation of the operating system Android malfunctions occur and you are faced with the fact that Lenovo's phone does not turn on. The reasons that contribute to this:
- the system does not have anti-virus protection;
- using a large number of applications from unknown developers;
- cleaning of software garbage is not performed;
- the phone memory is full.
Problems associated with software bugs are solved in three ways:
Flashing should be the last thing to do, but it fixes most of the defects caused by platform failures.
Power button, loop
Triggered power button on / off , a broken or oxidized plume also leads to the fact that the smartphone does not turn on Lenovo ... Possibly, the bosoms of the button location are dirty and it needs cleaning. This problem cannot be eliminated without disassembling the gadget.
Screen
Connect your gadget to a PC, is it detected by the system? If the computer sees it, then in this case, a matrix (display) defect is likely. The device itself is working, but the screen does not provide an image. What preceded the manifestation of the problem that the phone Lenovo does not turn on? Could it have been a fall, a strong blow, or moisture? Contact the service center for specialists.
Mechanical damage and moisture ingress
Any careless action with a gadget will lead to negative consequences. Mechanical damage such as a fall or impact can cause damage that can be repaired with costly repairs. The same is the case with the ingress of liquids on the phone. It is necessary to take immediate action to prevent further oxidation of the elements inside the smartphone.
Most owners of modern gadgets have repeatedly encountered situations when the device malfunctioned or did not respond to commands. Unfortunately, almost all smartphones fail from time to time, regardless of the manufacturer and price.
Today we will consider the problem when the Lenovo phone does not turn on, and we will analyze the reasons for this.
Lenovo cell phones often have problems with software and hardware components, especially if we are talking about budget models. One of the most common is spontaneous shutdown and lack of subsequent response to various user actions. Although the situation seems dire, at first glance, only in extreme cases will a service repair or replacement of a smartphone be required. The sources of these breakdowns are of three types:
- Hardware - the problem is in the "hardware" after falls, temperature jumps, tests by the sun, moisture and sand.
- Software - directly related to the operating system, viruses and failures.
- External - most often, the breakdown of the charger is mistaken for a malfunction in the smartphone itself.
Let's take a closer look at the reasons why Lenovo phone won't turn on, and how to solve them.
Trouble-shooting
In this section, we will look at the most common problems due to which Lenovo will not turn on:
- Full battery discharge and other related battery problems.
- Firmware update failures.
- Software problem.
- Virus attack.
- Mechanical damage to internal parts.
Full battery discharge
Battery problems can be temporary or permanent and have different solutions:
Incorrect system update
From time to time, the Android OS firmware and its shell are updated, but during the process, failures may occur. Often, after installing a new version of the system, equipment turns into a non-working "brick". However, do not rush to replace it with another model, this is solved by rolling back to the factory settings.
It is done using Recovery Mode. Three buttons are simultaneously clamped in the following sequence:
- Volume up rocker.
- Without releasing the previous one, the return key to the Desktop.
- In parallel with them, the power on and off button.
A menu will appear on the screen. The pointer moves up and down with the volume rocker, respectively. You must select the Factory Reset item, confirm your choice and wait for the process to complete.
If after that the smart does not work, then you need to contact a specialist, and he himself will be engaged in flashing the system.
Software glitches
Even more often, cell phones based on Android do not start due to various kinds of software failures. The manufacturer and developers of the system have foreseen such scenarios, therefore, it is advised to reset the settings in such cases. We have already discussed how to do it above.
Please note that sequential key presses will not work to start recovery mode on some models. It is launched with a special button on the end of the case, which looks like a small hole, using a needle or a special pin that comes with the kit.
Viruses
Viruses are another popular cause of difficulties with Android technology. They get in by downloading files and applications from unknown sources, and can seriously damage the system data required to run. Most likely, a flashing will be required, which will completely delete the information. But in some cases, the service center specialists still undertake manual cleaning of the system storage from viruses and malware.
You can avoid this outcome by first downloading anti-virus software, for example, Dr.Web or ESET.
Mechanical damage and moisture ingress
Consider the most popular types of mechanical damage that prevent switching on:
- Breakage of the screen (malfunction of the loop, display, or moisture ingress through the seams).
- The charging socket is dirty. Dust, clothing threads or crumbs get into it. you need to be careful using a regular needle for this.
- Breakage of the contacts of the gadget with batteries. This can be both oxidation and mechanical stress, which led to deformation.
- Damaged power button. If the device is new, then most likely it is a factory defect.
- The worst of the options is a burned-out power controller that manages charging.
Conclusion
If the problem cannot be diagnosed, or it cannot be solved at home, the gadget must be taken to a service center. If it's under warranty, avoid third-party tampering and applications that require superuser rights. And remember that only qualified technicians at certified repair points will be able to accurately diagnose the cause of the problem and find the best ways to solve it.
Video
The Lenovo A319 phone is one of the best options for budget gadget lovers. The manufacturer has a good reputation, and the smartphone itself is quite inexpensive. Nevertheless, no matter how reliable the device is, one day you may face technical problems.
Many are worried about the question: what to do if the A319 does not turn on? And what if Lenovo A319 does not turn on and hangs on the screensaver? Many users of this gadget have encountered this problem. Since it is very common, we suggest that you familiarize yourself with the main options for its solution.
Option number 1. Reboot
We are all accustomed to the fact that if some technique does not work, then it needs to be rebooted. And it is not at all necessary to find out why exactly it does not start or starts to turn on, but does not load to the end. There are a huge number of reasons for failures, and even experts cannot always name the problem that you are faced with in a particular case.
So if Lenovo A319 won't boot or freeze when turned on, the best and easiest way to resolve the issue is to restart your phone.
Have you tried restarting your device but it didn't work? Then repeat it five more times. Getting the system to boot normally is not easy, but multiple reboots are overwhelmingly successful.
You can also try simultaneously holding down the Home button, as well as the power and volume keys. Some Lenovo models, including the A 319, respond to such an impact and stop hanging.
The main advantage of these methods of solving the problem is the absence of any risk to the phone and the data stored on it. This is their main difference from the methods of bringing the phone back to life, which we will look at next.
Option number 2. Hard reset
If an elementary reboot did not help, and still Lenovo a319 does not turn on or does not load beyond the screensaver, you need to resort to more radical measures. The best option is to reset all settings, or, in other words, Hard Reset the phone. This is quite simple to do - you just need to go into Recovery mode.
To make it easier for you to perform this procedure, we offer a simple algorithm:
- Turn off the phone by holding down the power key for 10-15 seconds.
- We simultaneously hold down the power and volume down keys. You can do this with one hand, but we recommend using both. There have been cases when, through negligence, people dropped the device, trying to press both buttons with the fingers of one hand.
- We are waiting for the manufacturer's logo to appear, and after a few seconds we get into the Recovery mode.
- Operating with the buttons to decrease and increase the volume, select the item "Wipe Data". It involves deleting all data and settings from the phone. Thus, whatever the software problem is, most likely you will fix it.
- The system will ask you if you really agree to the deletion of all data. Confirm the action and wait about a minute. Next, you agree to reboot the device and wait for the updated software to download.
If all systems start up normally and the phone functions the same as it did before the problems occurred, then congratulations - you have found a relatively simple and painless way to resolve the issue. If the phone still does not turn on, or the download does not go beyond the screensaver, it remains to resort to the third method.
Option number 3. Flashing
The third method is the most radical, but you should definitely use it if the phone suddenly turns off, does not turn on, or freezes. We act according to a simple logic - if the system cannot be restored, then it should be replaced. In the case of computers and laptops, we usually reinstall the operating system, and for phones, a firmware change works.
First, download the firmware to your computer, and then drop it onto the memory card installed in the phone. The firmware downloads as an archive, and you do not need to extract files from it. We throw it on the card in this form.
Now we go to Recovery in exactly the same way as in the previous case, that is, holding down the power and volume buttons. If there are installation files on the memory card, then the system will recognize them by offering you the following item: install zip from sdcard. This is exactly what is needed if the phone turns off and we need to change the firmware. We confirm the actions by starting the file upload.
Flashing usually takes a few minutes. Do not be alarmed if the phone goes off during the session - this is quite normal. It can reboot, and repeatedly. And this is not a cause for concern.
After several reboots, the system will turn on, and, most likely, you will no longer see freezes and brakes. This means that the problem is a thing of the past, and now you know how to turn on a phone that has started to slow down or does not turn on.
