In this manual, we will tell you how to connect Highscreen Boost 2 via USB to a computer or laptop like a USB drive. Nowadays all Android devices (phones, smartphones and tablets) can be connected using a USB cable.
If something doesn't work out for you, ask a question in the comments. So, how to connect Highscreen Boost 2 to your computer via USB. Before connecting, be sure to install any computer motherboard drivers required to connect your device to your computer via USB.
Connecting Highscreen Boost 2 via USB to a computer
Connect one end of the supplied USB cable to the computer, and the other to Highscreen Boost 2. After this manipulation, the USB icon should appear in the status bar of the gadget, if the device has been recognized.
In Android 4, most firmwares connect via USB automatically, so to get started, just try connecting Highscreen Boost 2 to your computer's USB. If the connection fails, then you can try to connect the gadget to the computer in USB mode in the following way.
Connect the USB cable to Highscreen Boost 2 and to your computer. Go to your smartphone settings and select the ‘Memory’ section. Next, find the USB connection settings, where you need to select the device as MTP. A message appears that USB is connected, or click on 'Attach USB as mass storage' if necessary. A confirmation dialog will then appear. Click ‘OK’.
For the old version of Android 2.1, the connection is as follows. On the home screen, use your finger to slide down the status bar at the top. Then click ‘USB Connection’. And the USB mode will be connected.
For Android 2.3, things are a little more complicated. Pull down the notification panel, click 'Connect as USB storage'. Then press the ‘Ok’ button. When the green Android icon turns orange, it means the gadget is in USB storage mode. On Windows, it should appear as a removable USB drive that will be assigned a drive letter.
Connect your phone via wifi bluetooth usb Highscreen. There is a phone for example Highscreen zera f, Boost 2 SE, four and there is a computer. A simple question: "How to connect a Highscreen phone Boost 2 SE model on the Android 4.3 operating system with a color IPS screen, touchscreen - 1280x720 dpi or other to a PC?The answer simply will not work, you need to know what equipment is available for pairing on the Highscreen zera s rev s, five pro, hercules or another model and on a personal computer.
For example, a Highscreen model four phone running Android 5.1 operating system with a color IPS screen, touchscreen - 854x480 dpi can be connected to a computer via wifi, bluetooth or via usb cable, data cable.
Ideally, it should be like this, connected a usb cable or entered a password for wifi or turned on bluetooth and everything worked. In most cases, this is the case.
If for some reason you have difficulties with connecting the phone to the laptop or PC via wifi, bluetooth, usb, read the following instruction.
Further it will be described: solving the problem when connecting the phone bay, alpha rage, spade or another model via usb, setting up bluetooth connection and connecting to a PC, connecting a mobile phone via a data cable, connect to a laptop via wifi.
How to connect pure f, verge, winwin or other model phone to PC
A small review and recommendations on how to connect a Highscreen phone model zera s rev s on the Android 4.4 operating system with a color IPS screen, touch screen - 960x540 dp to a computer, laptop, to a PC via usb, wifi, bluetooth to save music recording, files, rewrite photos, videos and more on your PC. The information for this article is collected from different sources and grouped into sections: connecting a phone to a computer via usb - suitable for many modern phones, connecting a phone to a computer via bluetooth, for different models of phones equipped with wireless communication and connecting a pure f, verge, winwin phone to computer via data cable.
In order to connect the phone to the computer, there are several ways:
The simplest is via a usb cable, after connecting a new removable disk should appear on the computer, as if you had inserted a USB flash drive into the usb port. In order to have access to phone data: Contacts, messages, calendar and others, you need to install a special program developed by the phone manufacturer. With such a connection, errors and problems are possible, which will be described in more detail below.
Downloading phone data from a flash card. Everything is simple here. We take out the flash card from the phone, insert it into the computer, a new disk appears in "My Computer" with the phone files. For everything to go smoothly, you need to enable the "Save everything to a flash card" setting in your phone, and your computer must have a slot for inserting a flash card in the MicroSD format you need, Memory Stick PRO Duo or another.
Connect to laptop or computer via bluetooth. It is necessary that both devices be equipped with a bluetooth module. You can connect to the phone through a special program or by means of Windows. Before connecting, you need to activate, turn on both bluetooth modules on the phone and PC and go through the procedure for identifying and pairing devices. Read more about this here.
If the phone is quite simple or outdated and does not have a USB port and a flash card and there is no bluetooth module, then there is only one way to connect - via a DATA cable. Consider whether to mess with a data cable connection. The fact is that the connection is not always successful and it is not always possible to squeeze something out of such low-capacity phones today. Nevertheless, there is such a method, and after successfully connecting the data cable to the phone and computer, one more software condition is required. You will need to find a program that supports your phone model. Practically all well-known mobile brands Nokia, Samsung, Apple, Motorola, Sony Ericsson, HTC and others? have their own special licensed software that will help you connect your phone to a PC. The program should be included in the CD for your phone or it can be downloaded from the cell phone manufacturer's website.
Problems when connecting phones, tablets on the Android platform.
Question: “I bought a smartphone with Android. I turn it on, connect the phone to the computer via a USB cable. The sound of connecting a new device is heard in the speakers of the computer and on the smartphone, there is no new disk in the system. The drivers are all installed, there are no problems with the cable or phone either. What to do?"
Answer: The problem of not connecting the phone to the computer may be due to.
Defective cable;
- the computer is faulty, not configured;
- defective, telephone not configured.
1.USB cable should not be long, short, short, not bent, contacts not damaged. It is best to find a cable already tested on another phone and use it when connecting your phone.
2. The computer should initially work without problems and errors. Always used to recognize connected devices, printers, cameras, flash drives, has the necessary drivers and programs installed for work. The computer must be completely rebooted. Start - Shutdown - Reboot.
3. The phone must be rebooted before connecting - turn it off completely and boot from the black screen. If this does not help, you need to turn off the phone again, remove the battery, SIM card, flash card from it. Then put everything in its place: battery, SIM card, flash card, cover, pull out the usb cable from the phone and computer and insert it. Switch on the phone.
More fine tuning of the connection between the phone and the pc:
Connect the Android smartphone to the computer via USB and wait for the characteristic sound from the speakers, making it clear that the connection has occurred. In the Windows tray at the bottom, a message appears device connected and a description of the connection: connecting or connected or searching for a driver.
Go to the Android phone settings and check the item: Settings -Applications -Developer Tool. The USB debugging item must be disabled.
After these actions, a connection window will appear on the phone screen. With options: USB connection - Removable disk, Phone connection. Select the option you want. For a simple amount of files, download, download music, videos, games, you need to select the item - Removable disk. In this mode, some phone functions will not work.
After that Windows will give a message that an additional Flash drive is connected and it will be possible to work with files. But be careful not to accidentally delete the system files of installed programs from the phone, without them the phone will not be able to work.
Disconnect the phone correctly. you need to click on the connection picture in the lower right corner of the tray and select the "Disconnect flash drive" command. After disconnecting the phone from the laptop, PC, Android may slow down a little for a while, until the operating system indexes the new files of the phone.
Working with the file system when connecting the phone to the PC can be in the user or administrator mode. In administrator-root mode, access to all system files of the smartphone appears. The user is not given such rights, no matter what he spoils. You can read about how to get ROOT access to your Android phone here.
Question 2:
Description of the problem:
Previously, when connected to a PC, a notification about the choice of connection would automatically pop up on the phone: Only charging, Disk drive. Today, for the first time, the phone did not show it. It just starts charging without any notifications. What I did: I rebooted the phone, rebooted the computer, configured everything through the "Settings / Connect to PC", turned off the antivirus. I forgive advice from you people.
Answer 2:
If you have the Task Killer program installed on your phone or computer (quick closing, application remover), you must remove it from your phone.
- For HTC phone, install the latest version of the HTCsync program.
- Turn off the phone.
- We disassemble the phone (remove the cover, battery, SIM card, USB flash drive) and put it back together.
- We turn on the phone.
- We connect the usb cable.
- A selection window appears on the phone (Charge, Disk drive, Other).
- Select the Disk Drive.
- Connecting to a PC.
How to connect phone to computer via Bluetooth
To connect you need:
Turn on Bluetooth in the phone, if necessary, set the mode - "Visible to all" in the "Bluetooth" menu.
- Turn on Bluetooth on the PC, the Bluetooth logo should appear in the tray.
- Or select the "Connect" command through this Bluetooth logo.
- Or connect to pair your phone with a computer through a special program. For Nokia phone - Nokia PC Suite. For Samsung - Samsung PC Studio.
- When connecting through the phone manufacturer's program, you need to go to the program settings. For Nokia PC Suite select the Manage Connections tab - Bluetooth connection type - click the "Configure" button.
- As a result, a password entry window should appear on the phone and computer, enter, for example, 0000.
If the connection fails, click the "Search for devices" or "Search again" command.
Connecting a phone to a computer via a DATA cable using proprietary software and drivers from phone manufacturers.
For phones, smartphones Samsung - the program Samsung PC Studio.
Samsung PC Studio allows you to connect your phone to a personal computer and provides the ability to control your phone over the network. Samsung PC Studio application can transfer and edit personal information and media files on SAMSUNG phones. And also, the program has a connection wizard, a contact manager, messages and files, and a manager for synchronizing the phone with a computer. In some cases, the program requires DirectX 9.0 for Windows.
Key features of Samsung PC Studio:
Backing up and restoring phone information: contacts, calendar, files via PC.
- Synchronization of calendar contacts and notes in the format of Microsoft Outlook.
- Using the phone as a modem.
- View and rename mobile phone files.
- Create, view, delete and change contact information on a PC.
- View, delete, copy SMS messages to PC. Create and send SMS from PC.
- Convert music to a format supported by your phone.
- Save, view and play images and video files from phone to PC.
- Image editing to create phone desktop backgrounds, MMS images and download them to your phone.
- Download and install programs, applications and games to your phone.
Software for synchronization of phones, smartphones Nokia - program Nokia PC Suite.
Nokia, like other phone manufacturers, for some models of its phones, requires its original DKU data cables for connection. Connecting a phone to a PC through such cables is possible only through the official, proprietary software - the PC Suite program. Nokia PC Suite application - a package of programs through which you can change and edit images, melody, polyphony, edit and modify phonebook entries, work with messages, use the phone as a modem and most importantly, of course, copy and download files to the phone via PC.
Connection of Siemens phones, DES, SiMoCo, MRM programs.
Many communication programs can be used for Siemens phones - DES (Data Exchange Software), SiMoCo (Siemens Mobile Control) or MPM (Mobile Phone Manager). This phone manager is a multifunctional application with which you can successfully copy and save information on your Siemens phone.
Connecting Motorola phones.
The universal programs listed above are also suitable for Motorola phones, I would especially like to highlight the program for synchronizing Motorola phones with a PC - MPT (Mobile Phone Tools) and ME (MobilEdit).
Programs for all phones.
The latest versions of Nokia PC Suite support connection to almost all models of Nokia phones, but there are problems with finding and purchasing original DKU data cables on store shelves. To solve this problem, there is the MobiMB program, through which you can connect your phone to a computer not through proprietary CA, FBUS and DLR cables. This program is similar to PC Suite and can connect the phone via bluetooth and IrDA as well.
It was theory, now practice:
1. Install on the computer all the necessary software, programs, drivers from the phone's CD disk or download the software from the phone manufacturer's website via the Internet.
2. We reboot the computer.
3. Insert the cable into the phone and computer port.
4.Open the program (for Nokia) - Nokia PC Suite.
5.Select the connection we need, in our case the serial port.
6. press the "Advanced" button and select the correct COM port.
7. Our phone should appear in the program in the list of phones.
If the phone does not appear in the list of connected ones, then either the wrong COM port or problems with the drivers are selected, or the cable is missing.
In this case, you can try to connect your phone to your computer through another program, such as MobiMB.
The logic of the connection process on different programs and phones via the date cable will be the same, the only difference will be in the names of the program menu items.
To connect Motorola phones through the MPT (Mobile Phone Tools) program, you can prompt this setting. If the program does not find the phone the first time. Then, in order to connect the phone, press F6 and select "Communication Options". Check the boxes next to "Activate reception" and "Activate transmission" and click the "Change Modem" button. After that, the program will offer to select the phone model. After that, the program will try to find the phone, and when it is found, everything will work.
Detailed instructions on how to connect a Highscreen five pro phone on the Android 5 OS platform on a screen with a resolution of 1280x720, color AMOLED type, 16.78 million colors, touchscreen to PC via wifi bluetooth, via wi-fi, bluetooth, bluetooth, via data cable. Program for connecting phones Highscreen power ice, zera f, Boost 2 SE, four, zera s rev s, five pro, hercules, bay, alpha rage, spade, pure f, verge, winwin, pure j, spark 2, thor black, Alpha R, omega prime s mini, spider, winjoy, black gtx, Zera U, spark, yummy duo, boost 3 pro, blast, strike, alpha gtr, explosion, alpha gt, cosmo, jet duo to computer, laptop.
Popular Highscreen Reviews
 | Free download of pictures is possible on such types of Highscreen phones as simple and touchscreen, for different OS, registration is not required. |
 | Where can I download ringtones or listen to music on my Highscreen phone for free? |
 | Here you can find the latest and current drivers for Highscreen mobile phones and tablets. This link contains the correct, correct programs and the latest drivers for Highscreen mobile devices. |
The cable connection is very convenient for the user - you can quickly upload your photos, upload new ones. And what a disappointment and annoyance we experience when connecting usb and not seeing any folders. How to steer the situation? There are several options for the development of events, we act in stages.
Restart your computer and Highscreen. Manipulation often helps to resolve inconveniences, especially if earlier the interaction was performed correctly.
Check the cord - not broken? Even the original wires are prone to fail with active use. And the Chinese refuse without good reason, they simply stop working or perform an endless cycle of connection - disconnection.
Examine the port. It may also be defective. It's easy to check - use another.
Another common case is the breakage of the socket (the connector into which the wires are inserted). This usually happens in two cases: careless use (constant sharp "pulling out" of the cords) or water ingress. In this case, urgent repairs are required, because the product is unlikely to be charged. Contact a service center, fixing problems is quick and inexpensive.
You can also try an interesting way - remove the battery for a while, after turning off the smartphone. In some cases, this serves as a solution.
These are problems that can be classified as mechanical. There are a number of software programs that we will consider. Therefore, if the above does not help, do not despair, there is a chance to fix everything.
Initially, we go to study the settings. Find the item "Memory". Open the properties - rather, they are all hiding under three dots next to each other. If you have a modem mode - disable it, select media.
The computer must be enabled for automatic object detection and search for updates as needed - Windows Update.
When connecting to a laptop for the first time, an “unrecognized device” pop-up window will appear. By accidentally clicking in an extraneous area of \u200b\u200bthe screen, you can lock the media. Be sure to unlock, otherwise the content will not be shown!
Lack of drivers is the main problem when connecting to a PC. Moreover, both USB and the phone itself can fly off. If you still have the disc that came with your motherboard, launch it and follow the instructions on the screen. If not, find your motherboard ID and search the internet for drivers. This will remove the problem, and you can determine the software for Highscreen in the "Device Manager" section. If there is an exclamation mark with the name, reinstall the software from the media or from the network.
Viruses block important functions and can interfere with correct identification by technology. Download antivirus.
Non-standard firmwares cause a lot of trouble for owners. Use preset data.
Try a factory reset. Before doing this, it is advisable to make a backup using a popular application. Do not forget that any manually configured installations will be removed. The files will remain on the SD card.
