Well, you have become the owner of a new washing machine! This useful assistant will make washing fully automatic, saving the lion's share of your time, your energy and nerves. But in order for it to serve for many years, it must be properly installed and launched. How to turn on the washing machine so that it will work properly and correctly in the future and will not malfunction? This will be discussed in this article.
Checking the machine before operation
If the installation was performed by specialists, the following steps can be skipped. Otherwise, you need to check everything carefully and only after that you can turn on the washing machine:
- Check for shipping bolts. With their help, the drum is fixed during transportation. Their location is on the back of the washing machine.
Important! If the transit bolts are found, the wash cannot be started.
- After removing the fixing elements, the holes after them are closed using special plugs. They are always included in the package.
- Determine the hardness of the water - this is necessary to select the correct type of powder.
- We check how the machine is connected to the network, connected to the water supply and sewerage system.
- The tap that blocks the inlet hose must be open.
First start
All modern automatic machines have almost the same initial start-up:
- The first step is to check the power cable connection and grounding.
- The laundry is piled into the drum.
Important! Each drum is distinguished by its regulated weight of laundry that can be loaded into it. These data are indicated in the instructions. In case of overload, the drum cross may break.
- Before starting the washing machine, the door must be closed.
- If the machine has a vertical drum, the drum closes first, and then the hatch. And if the loading is horizontal, the door just closes.
- The mixture is poured into the powder compartment, its dose must be determined according to the instructions.
Important! The powder is poured in a certain amount, since if there is an excess of it, foam is formed, and if it is not enough, the laundry will be washed poorly.
- When filling the mixture, use a measuring glass.
Important! Most often, the location of the main compartment for the powder is on the left, the mixture is loaded into it, with which the main wash is performed. Next to it is the location of the prewash containers and the rinse aid section. Of course, these compartments can be located in other places as well - it all depends on the manufacturer.
- Before turning on the washing machine, you must ensure the water supply. Depending on the model, water can be supplied in different ways. Most often, machines are directly connected to the water supply. Some models require hot water connection. And there are options for machines, in which it comes with a separate water tank.
Important! If the washing machine is connected to a water supply, in some configurations a valve is provided to stop the water supply.
If all conditions are met, the washing machine can be turned on, but before that, you need to select the correct washing program.
Varieties of washing programs:
- “Hand wash” is used on delicate fabrics. At the same time, water is used with a temperature not higher than 30-40 degrees. With this washing mode, the drum rotates at a low speed, without spinning.
- The “quick wash” mode lasts about half an hour. The water temperature does not exceed 30 degrees. At the same time, things are wrung out at maximum speed.
- In the “pre-wash” mode, you need to pour the powder into two compartments. One part is used for pre-wash, the other part is used for pre-wash.
- The "Synthetics" setting is used for fabrics that need to be washed at temperatures up to 60 degrees.
- “Delicate wash” is used in the same cases as hand wash. However, this mode is spinning.
- Cotton mode is available in all washing machines. It is intended for washing bed linen or cotton fabrics. Washing takes place at temperatures up to 95 degrees. This process takes up to two hours, spinning is maximum.
- Intensive wash mode removes stubborn dirt. The water temperature is 80-90 degrees.
- In the “economy wash” mode, there is practically no heating of the water. This saves both water and electricity.
- The Wool / Silk mode can only wash items listed in the name of the mode. The water temperature is low, no spinning is performed.
How to extend the life of your washing machine?
Before turning on the Indesit washing machine or any other, you need to follow the rules to extend the life of the equipment:
- sort the laundry, since the mode is selected for a particular fabric;
- in different washing machines, there are differences in temperature and spin;
- it is imperative to sort the laundry by color;
- linen with warning markings cannot be machine washed;
- if there are embroidery or rhinestones on things, they are erased in the “manual” mode;
- use only a working electrical appliance - if a suspicious smell or sound suddenly appears, washing immediately stops;
Important! Before washing, you should carefully check the pockets for small items. Otherwise, they can clog the filter.
- a damp cloth is used to wipe the body and panel of the washing machine;
- after each wash, cleaning with special containers for detergents is required;
- once every six months, the machine requires preventive cleaning, with the use of special detergents.
Video
Whoever is installing the washing machine, do not rush to load it with laundry immediately after that and start the wash cycle. First, you need to carefully check whether everything was done correctly. How exactly such manipulations are performed will be prompted by some professional advice.
So, first of all, it is recommended to study the instructions that came with the device. Even if a person already has experience using automatic washing machines, it is important for him to remember: each brand and model may have its own characteristics. They will certainly be discussed in the manual.
When carefully reading the instruction manual, it is worth starting some practical steps. First of all, it's not a sin to make sure that the so-called shipping bolts have been removed from the machine. Manufacturers usually screw them onto the back of the device. Such bolts are needed so that the drum of this household appliance is fixed during transportation.
However, of course, after installing the machine and before starting it for the first time, they must be unscrewed. Otherwise, washing will fail. Moreover, when starting with the transport bolts not unscrewed, the device can easily break down, and it is possible that a lot of money will be spent on fixing it. The holes remaining after unscrewing these parts must be closed by all means with special plugs, usually supplied with the machine.
The next step should be to check the connection of the device to the mains, as well as to the sewerage and water supply. In the case of the latter two, it is important not only to confirm for yourself that the drainage and water intake holes are connected to the appropriate communications, but also to make sure that everything was sufficiently sealed. After all, if there are gaps at the connection point of the required hoses and pipes, regular leaks cannot be avoided during operation of the device. Special sealing threads, clamps and other similar means will help to cope with such a problem.
Washing will not work if the tap in the inlet hose is turned off. In the absence of such difficulties, you also need to make sure - as well as that there are no other obstacles on the way of water into the washing machine.
It is important to make sure that the instrument is level in all planes and is positioned on a sufficiently stable base. Concrete and well-laid ceramic tiles are considered ideal in this regard. Wooden floors, linoleum and rugs as a base lead to an undesirable effect - vibration of the machine during its operation. A special rubber mat as a stand will help to change the situation in this regard - it will give stability to the device.
It is advisable to know in advance what the hardness of the water supplied to the dwelling is. Then it will be possible to purchase a suitable washing powder for the machine and more accurately choose its dosage for washing. By the way, it is not worth pouring more than 100 grams in any case.
When loading dirty things into the machine, the permissible load volume must not be exceeded (it is usually indicated in the instructions). Otherwise, the service life of the device can be greatly reduced due to unnecessary stress on it. It is better to divide the amount of laundry into two washings, sorting it out by color and type of fabric.
All that remains is to select the desired program. For some models of machines, it will also be necessary to additionally set the temperature or other parameters (number of revolutions, etc.). After that, after closing the door of the device, press its start button.
At the end of the wash cycle, immediately remove the laundry from the drum. If it is there for a long time, it can lead to the formation of mold due to excess moisture. By the way, for this very reason, it is necessary to keep the door of the machine open when the wash is not in progress - so that the excess liquid evaporates.
are popular with Russians for the successful combination of the price-quality pair. Italian washing machines are generously equipped with programs and modes - everything for the convenience of the user. To make "communication" with the device as convenient as possible, all washing modes in the "Indesit" washing machine are placed on the control panel. Each wash option is signed and labeled with an intuitive icon. Let's figure out what functions and programs are in Indesit machines and what their designations are.
Why do you need instructions?
Regardless of the model and brand of the SMA, the first thing a user should do is to read the instructions. This is where you can find answers to most of the questions. Most often they look there to understand the control panel. Subsequently, having memorized the designations and the essence of the proposed programs, the owners of the washing machines can easily and quickly select the desired options.
Signing system from Indesit
The Italian manufacturer has taken care of maximum control accessibility. The icons used are clear to the user. Moreover, each is signed verbally and numbered. Legend:
- Cotton - cotton box or T-shirt.
- Delicate wash - flower.
- Curtains - an image of curtains.
- The tree is economical.
Let's take a closer look at what options are offered by Indesit CMA.
What does Indesit offer?
A mode is a process characterized by certain conditions. Temperature, drum speed, time and goal are varied. A program is a certain order of actions, which, differing in the washing conditions, can consist of several modes.
The main
- Cotton. Drawn a T-shirt or cotton box. The user can select options with different temperatures and durations:
- 90–95 degrees is a good option if you need to wash stained kitchen towels. The drum is fully loaded. And the cycle time is almost 3 hours.
- 60 degrees. With intensive washing, the process is shorter, since the soaking step is excluded. The duration is reduced to 2.5 hours. This option is chosen for heavily soiled white products - tablecloths, towels, bed linen.
- 40 degrees. Recommended for colored items. The duration is about 2.5 hours.
- Synthetics. Shown is a flask showing temperature. There are two options:
- 60 ° C - 1 h 25 min.
- 40 ° C - gentle version lasting 1 h 11 min. Loading - 50%. This is usually 2.5–3.5 kg, depending on the model.
- Wool. A skein of thread is drawn. For woolen and cashmere items. Duration - 55 minutes. Temperature - 40 ° C. The spinning speed is reduced.
- Silk. The picture shows a T-shirt. For curtains made of fine fabrics, for viscose and lingerie. They are washed at 30 ° C for 55 minutes. Load the drum by about 20% - up to 1–1.5 kg. No spin.
Some models may contain separate modes, without the emphasis on fabric. There is a wash:
- Preliminary. Use instead of soaking. Gently roll in lukewarm (30 ° C) water.
- Daily (everyday) - a standard program for prompt washing of lightly soiled items.
- Intense. For cotton and linen. Hot water up to 95 ° C. It is analogous to 90 ° C cotton.
- Delicate - similar to "wool". You can wash completely different fabrics that have one thing in common - special requirements for the process conditions. Wool, organza, lycra and other delicate fabrics are washed at 40 degrees.
Additional
They are chosen for specific things - taking into account the fabric and the degree of pollution:
- Jeans. The icon matches the name. Designed specifically for jeans. Washed at 40 degrees. Loading - up to 2.5 kg. Drum RPM reduced.
- Fast wash mode. The picture is a watch. The express version allows you to wash things in a quarter of an hour. Loading - about one and a half kg. Temperature - 30 ° C.
- Shoes. The picture shows a sneaker. Created for sports shoes - sneakers, suede sneakers. Wash in lukewarm water, two pairs at a time. The cycle duration is 50 minutes.
- Sportswear. There are models with two options - regular and intensive. The water heats up to 30 ° C. Time - 1 h 20 min.
SMA "Indesit" also has special functions:
- extra rinse - intuitive notation - variations on the theme of drops and a bowl of water;
- spinning - drawing in the form of a swirling spiral;
- Eco Time - Reduces time and water consumption. Combines with "synthetics" and "cotton 40".
- easy ironing - an iron is drawn;
- delayed start - clock icon.
What buttons and selectors are there?
Any Indesit CMA has the following elements on the control panel:
- Program selector. The panel contains icons duplicated by pictures. The user sets the desired option by turning the selector.
- Temperature switch. If the user selects a specific program, the temperature is automatically set. But thanks to the selector, you can adjust the water heating.
- RPM switch. The drum rotation speed can also be changed - in any direction.
- Start / stop or on / off button. Activates and deactivates the machine. Near the button there is a LED signaling the state of the device.
Also on "Indesit" typewriters, depending on the model, there are additional buttons:
- 50% loading. It is pressed if you need to wash several things. Saving water and energy.
- Reducing the spin speed. Used for delicate fabrics.
- Super rinse. For thorough rinsing.
- Cold wash. For delicate fabrics and not very dirty items.
- Disable spin.
How do I set the desired mode?
The selection is made with the programmer knob. Around the selector switch are labels and icons. On older models, there are no verbal designations - only icons, hence the problems with the choice. It happens that the owners of cars do not understand the images, then instructions are needed - to decipher the designations. In the new models, the manufacturer took into account this omission - all the icons are duplicated with words.
Before setting the mode, you need to sort out the items that you are going to wash. Evaluate them - by type of fabric, color, degree of contamination. Taking these positions into account, a decision is made: choose a ready-made program or customize your own. If the preference fell on the second option, then the user chooses:
- temperature;
- duration of the process;
- rotational speed.
A ready-made program is included or your own is configured, the user can additionally add:
- soak;
- rinsing;
- easy ironing;
- spinning.
The process can be postponed for a certain time - depending on the duration of the timer. Usually the maximum delayed start time is 24 hours. The descriptions of the modes can be found in the instructions.
Features of the work of SMA "Indesit"
When using Indesit washing machines, follow these rules:
- Observe the maximum permissible drum load.
- Sort laundry by color, type of fabric, color fastness and presence of decor (embroidery, beads, rhinestones, etc.). The presence of decorative ornaments is a reason to use special bags.
- Read the labels on things - what is allowed and what is prohibited for a particular product.
- Check your pockets to prevent damage to your AGR.
- Turning sweaters, shirts, and other clothing inside out will improve the washing performance.
- It is forbidden to wash many large items at the same time so that the balance of the drum is not disturbed.
- By pressing the "start" button, make sure that the device is connected to the mains.
- When choosing a mode, turn the selector to the desired position. If necessary, adjust the process parameters with the special switches. After correcting the software settings, start the device.
What is prohibited?
Users of the Indesit SMA should know which actions should be avoided and which are prohibited at all:
- It is not recommended to load several large items into the machine at the same time. It is advisable to put one or two large products and every little thing in addition.
- Do not use powders for hand washing - this threatens with increased foaming.
Special Modes in Popular Indesit Models
- WG1035txc. A distinctive feature of this modification is the presence of additional installations for each main program. For example, not just "synthetics", but several options - with fabric softening, anti-shedding and for permanently colored garments. Additionally, automatic application of emollients is installed.
- IWDC 6105. There is a non-standard option "light sport" - for washing lightly soiled sports items for fitness, yoga or swimming. There is a "quick dry wash" - quickly washes and dries things. Half load. Ready time - 15 minutes.
- WISL 105. Only one additional option - “daily wash at 30 ° C”. Suitable for synthetics with little dirt. Saves water and energy. It is recommended to use liquid detergents.
- WISL 102. In addition to the "daily care 30 degrees", there is also "light ironing" - its activation depends on the tolerance of the selected program, load and temperature.
- WIT 60. Budget version without additional options. But there is a "stop water" function.
- WIUN 102. There is a “daily wash of synthetics” at 30 degrees.
Useful video:
A distinctive feature of the Indesit range is its conservative control panel. It is easy to understand, since almost every icon is duplicated by an inscription. Simple operation is the key to "mutual understanding" between the user and the technology.
2018-09-11 Evgeny Fomenko
Preliminary preparation
The service life of the washing machine depends on how you start the washing machine for the first time. It is enough to do something wrong for the device to fail and it will be necessary to repair a machine that has not yet been in operation. In any case, having made the purchase of a washing machine, before turning on the washing machine for the first time, you must carefully study the instructions.
Before washing clothes in a new machine for the first time, you should check how correctly it is connected:
To make the device use less electrical energy:
- Do not overload the drum in excess of the norm established by the manufacturer;
- Do not machine wash items that are not intended to be machine washed;
- Keep out of drum metal objects that could damage the drum and laundry.
Readiness check
The readiness of the washing machine for operation is determined by performing preliminary preparations. Following the recommendations of the instructions for the device, the unit must be connected to the network and check the presence of voltage on the washing machine. This is indicated by the indication on the display. These can be indicators of the "On / Off" button, "Network" and so on.
After turning on the machine to the network, load the drum with linen, not exceeding the norm and select the required washing mode. To do this, it is recommended to look at the instructions to determine what type of things, in what mode to wash, and then do so.
Speaking of the readiness of the washing machine for work, it will not be superfluous to check the hardness of the water in the water supply, which is planned to be used when the machine is operating. Depending on the chemical state of the water, the required amount is poured into a special compartment for washing powder. Housewives usually add special water softeners or bleaches as needed.
What to pay special attention to
Both when starting the machine for the first time, and during its further operation, it is necessary to follow certain rules that will help the washing to be of better quality, and the machine to work much longer.
Unusual sounds after starting the cycle indicate a malfunction or that there are foreign objects in the machine that interfere with its normal operation. The illuminated indicator or the highlighted error code will help determine its nature and take measures to eliminate it, without leading to the need for repair.
Most modern machines, for example models LG, Combustion, Miele, Samsung, Haier, Hotpoint, Atlant, are equipped with special sensors that signal when there is a danger of drum overload. In this case, you need to remove unnecessary things from it, since overloading the machine can lead to damage to the crosspiece.
The water inlet valve, especially when first turned on, needs periodic inspection and cleaning if necessary. Otherwise, fine particles of sand and rust from the water that get into the machine may damage the pump or clog the drain system. Experts recommend from the first days of the new machine to use special filters that soften the water or add chemical water softeners.
Detergents for the first wash
A recently purchased washing machine has most likely been tested before being sold and is therefore contaminated with oil and dirt in the drum. They must be removed before use. Therefore, the first cycle should always be carried out with no laundry loaded in the drum.
That is, "idle". This will clean the internal assemblies and parts of the machine and prepare it for further operation. Do not pour too much detergent into the detergent drawer right away, but choose the longest cycle.
The popular Helfer Start HLR0054 is a chemical agent well suited for the first wash. It effectively cleans devices from unpleasant odors, fuel oil, grease and other industrial contaminants. It is loaded into the powder compartment and after a complete “idle” cycle. As a result, the washer will be cleared of various deposits and ready to use.
On sale there are special ORO tablets for the first wash in the machine - an automatic machine. The first tablet - CLEAN quickly dissolves dirt on the inner surfaces of the machine, and the second - CALC, is put into the machine after 25-30 washes or after 3 months of operation. This is a preventive measure against the formation of corrosion and limescale on the heating element and is recommended to be done regularly.
Temperature mode and other features of the first wash
After checking the readiness of the appliance and working in the "idle" mode, you must select the program for the first wash with the items in the drum.
Modern models are distinguished by a wide variety of programs and additional options, such as disinfection. When choosing a mode, you should take into account the temperature indicators that affect the quality of washing. If the modes are incorrectly selected, the washed items can be irretrievably damaged. The attached instructions will help in selecting the mode.
Each washing machine has its own set of controls. So, more budgetary washers have an adjusting wheel, with the help of which the required washing mode is selected. On expensive models, touch panels and displays are installed.
Any machine must have a Start, Start, or Run button. It is pressing this button that turns on the washing machine in the selected mode.
The main focus is on how correct the machine is to communications. If a leak is detected, work should be stopped immediately and the damage should be repaired.
The principle of the first wash is practically the same in Aeg, Ariston, Beko, Drive, Bosch, Direct, Samsung, Candy, WLG and many others washing machines. This is a “dry” wash with a closed tub. On top-loading machines, the drum must be closed first, and then the loading hatch. With horizontal loading machines, everything is easier - you just need to close the hatch door.
Washing machines, especially the brands ECO, Electrolux, Zanussi, Ariston, Indesit, Kandy and many other brands, do not tolerate washing with hand wash powder, because it generates too much foam that can damage the electronics of the device ... In this case, it is necessary to immediately disconnect the machine from the power supply and remove the excess powder manually.
When operating not only a new washing machine, it is necessary to follow the recommendations of specialists, which will extend its service life and make things cleaner:
- If there is an unusual noise, rattling, abnormal vibration, grinding or whistling sound from the instrument, you need to stop work and stop the unit... For a new car, it is very important not to lose the opportunity to contact a service center under warranty. Therefore, if problems are found, it is not recommended to try to fix them yourself, so as not to violate the integrity of the warranty seals;
- Wipe down the case regularly machines with chlorine-free products and do not leave it damp after washing;
- During the first wash and afterwards, clean the drain system regularly and also remove moisture from under the sealing rubber cuff;
- Check pockets items before loading into the drum;
- Do not close the hatch after stopping the machine to allow moisture to evaporate.
Some manufacturers install a childproof function on their washing machines, for example, in Samsung Eco Bubble. To open such a machine, it is necessary to unlock the hatch lock by pressing a certain combination of buttons on the control panel.
We present to your attention a video about the first launch of the LG washing machine:
When buying washing machines, many people do not pay attention to the instructions for use. It seems that everything is simple: you turn on the technique and use it. However, this issue needs to be taken more seriously. The operating instructions will answer any question from the user, because the information in it is presented simply and intelligibly.
Users of Indesit washing appliances, as a rule, have difficulties with the control panel, since it is rather complicated. In this article, we will figure out how to use the Indesit washing machine.
Start washing
First, let's figure out how to use. It should be noted that it is quite simple to operate the washing equipment of this brand. However, it is better to study beforehand. It contains the following items:
- Open the hatch of the machine and place the laundry.In this case, the amount of laundry must not exceed the maximum permissible drum load.
- Make sure that the washing machine is connected to the mains.Then you need to press the power button.
- Select the desired washing modeby setting the program selector to the required position.
- Adjust the washing temperature.This is done by means of a toggle switch for selecting the temperature.
- Change washing programat your own discretion using the buttons that will be described below.
- Press the "start" button.After that, the washing process will start. You can also choose to just spin or rinse and spin separately.
Some models of Indesit washing appliances do not contain a start button. In this case, to switch on, you must first select a washing program. Then select the desired washing temperature and press the on / off button.
Washing appliances of the Indesit brand do not contain unnecessary electronics. It has both voice and remote control. It is also equipped with touch panels and color displays. Washing machines of this brand may seem old-fashioned to people who love modern gadgets. But at the same time, the absence of unnecessary electronics makes such equipment cheaper, and therefore more attractive to buyers.
It is important to note that the lack of the latest electronics does not in any way affect the quality of the wash. On the contrary, the control module of the washing machine is more reliable because it is simpler.
However, it is not only the technique that affects the quality of the wash.
It is also important for the user to learn how to properly start and adjust the Indesit washing machine. In other words, to get a good result, you need to learn how to use the Indesit washing machine.
- The laundry placed in the machine drum must be sorted. This should be done according to the type of fabric, the color of the linen, the durability of the paint, as well as the presence of weakly fixed elements on the linen.
- Check labels before washing new items. The manufacturer usually indicates on the label whether the item can be washed.
- It is important to check all pockets before loading clothes into the drum. Any small object caught in the Indesit washing machine can cause serious malfunctions. No less problems can arise if you accidentally wash an important document (passport, credit card, etc.). Therefore, it is better to immediately acquire this useful habit.
- Check that the buttons are securely fastened to the clothes before washing. You also need to zip up your clothing. And if the clothes contain plastic zippers, then it is better to wash them in a specialized bag.
- It is advisable to turn clothes inside out before washing. Then it is washed off better.
- Do not wash many large items at a time, this will worsen the balance of the drum of the machine. It is better to mix small and large items, and wash in several batches.
- Large items should not be washed one at a time. The result will be an order of magnitude higher if you put several small items in the drum along with a large item.
- You should not use powders used for hand washing, because in this case, too much foam is formed.
- Each detergent must be placed in the appropriate tray. Each product has its own powder receptacle compartment.
- If the laundry will be washed without heating water, then you need to use half the amount of powder. Indeed, in cold water, it will not completely dissolve and will be removed at the end of washing with dirty water.
- The washing program can only be selected after stopping the Indesit washing machine. Failure to comply with this rule of the control module.
Most popular programs
Indesit washing machines have a variety of modes. Some modes are used much more often than others.
Users of Indesit washing equipment most often use the following programs:
- Mixed things (the program is marked with the number 3 on the selector);
- Wool (indicated by number 14);
- Medium-dirty, non-fading synthetics (indicated by the number 9 on the selector);
- Heavily soiled whites (number 1)
- .Colored things (number 4);
To wash heavily soiled white items, select washing mode 1. This is done using the program selector. The temperature selection toggle switch is used to select the MAX or 900C value. If you do not need to boil the laundry, then you can set 600C. Do not choose a lower temperature.
The number 3 on the toggle switch indicates the "mixed things" program. This program is the most versatile and is used more often than others. It is chosen when washing fading colored clothes or white, non-fading colored linen. In the first case, the temperature is set to 400C, and in the second - 50-600C.
Number 4 denotes the "colored things" mode. This mode is necessary for washing lightly and moderately soiled items. In this case, the water temperature is 400C. However, this mode can be used to wash not only colored but also white items.
For synthetic clothes, it is better to use the mode under the number 9, and for woolen clothes, under the number 14.
Care should be taken when washing woolen items. It is possible to wash such a thing only if it is allowed by its manufacturer. In other words, if the tag of a wool item contains a sign that prohibits machine washing, then it cannot be machine washed.
Buttons and selectors
First, let's look at the main elements located on the control panel.
The items listed below are on any model of Indesit washing equipment:
- Selector for switching programs.It is the most important element of the control panel. It allows you to select the desired washing mode by turning the knob.
- Temperature selector.The control module automatically sets the water temperature after selecting the washing mode. They also set the speed of rotation of the drum. However, these values can be changed using the temperature selection selector.
- Regulator of turns.Allows you to change the speed of rotation of the drum of the washing machine.
- On / off button.It is found on all Indesit washing equipment. Required to activate and deactivate the machine.
It should be noted that there is an LED indicator next to the on / off button. It is he who notifies about the inclusion of the washing machine.
On Indesit typewriters, there may be the following additional:
This button is used when you want to wash a small amount of laundry. It saves energy and water. This button is completely similar to the previous one and performs the same functions.
