After the L-series was released, which included the Epson L210, the development company paid sufficient attention to removing a feature that previously discouraged the use of ink from other companies. Now users of this series of equipment do not need to use special chips or enter any incomprehensible codes.
There can be only one problem - resetting the epson l210 ink level may be too difficult for someone, especially if you have never dealt with printers of this brand.
Immediately after the ink tank has been emptied below 50 percent, the Drop button will blink continuously. This is not yet an indication that it is time to panic, the printer will work normally for a while. But as soon as the button stops blinking, the device will stop working. This will be a signal to update the contents of the container and reset the error.
How do I reset this error?
The error reset procedure is performed as follows:
- First, make sure that the corresponding button is lit and not blinking.
- Remove the container block and put it in a convenient place.
- Open the lid of the unit and remove the lid from a specific container.
- Break off the cap of the cap, then remove the cap from the bottle, remove the seal and wrap the cap.
- Refill the ink tank with the desired color up to the limit line on the ink tank.
- Screw the cap onto the container tightly.
- Repeat steps from # 3 for each bottle installed in the container.
- Close the lid of the container unit completely and hang it on the device.
The only thing worth noting is that the developer still decided to leave the printer lock if there is too much waste ink in it in order to avoid overfilling the "diaper" and throwing it out on the table. If you want to reset the “pampers” in the Epson L210 inkjet printer, you can use the extremely simple and convenient PrintHelp program.
L210 Epson - Software Reset Ink Level
We need the Printhelp program, download and install it, and then launch it. In the left window of the program, we see the connected Epson printers, if it is connected only one, then accordingly it will be one and will be displayed there. We select the printer we need in this window and try to read the ink level (this is not a mandatory action) to make sure that there is a connection with the printer by clicking on “Read ink levels.
- The program will display the electronic ink level in the donors (ink tanks).
- After making sure that there is no ink, click “Close” on the window that appears.
- Press the button “Reset ink levels, wait a few seconds while the program will perform the necessary actions.
After the epson l110 ink level has been reset, Printhelp will inform you in the lower window. Colors that have not completely run out will remain at the same level, and black will be reset. Remember to refill the printer with ink if necessary.
Epson L800 (click to enlarge)
Epson L800 is an equipment designed for economical printing of photos and CD / DVD discs, equipped with six reservoirs for ink of various colors, protected by a special key. After the filling process, the device makes a request for the keys printed on the label, and only after their introduction does it begin to function. So many owners of these devices are interested in how to bypass the codes and use similar consumables from other manufacturers.
To do this, there are special utilities that perform the reset function. One of the most common utilities is PrintHelp... A program from the developer Resetters, which serves Epson L-series inkjet printers (L100, L110, L200, L210, L355, L800).
To install the application, you need the operating environment Windows XP (x32, x64), Windows 7, as well as an Internet connection. Drivers do not need to be installed.
1. The application is installed on the computer.
2. The printer is connected to the PC using a USB cable.
3. After starting the utility, the available printers will be shown in the window on the left. Here you should select the desired one and press the "Read ink levels" button to check if there is a connection with the device.
4. The program will display the required request.
5. To carry out the zeroing procedure, just click on the "Reset ink level" button
and wait a few seconds until the action is completed. Confirmation of the operation will appear in the window below.
6. To check again press "Reading ink levels"
Many users of Epson printers are faced with a situation where the printer stops printing the started page and stops working, requiring to replace the cartridge. Given that there can be more than four cartridges, and ink is consumed unevenly in them, such messages can arrive in a chaotic manner on the monitor screen.
The situation can be corrected by a continuous ink supply system. However, the printer may continue to report that the ink is out of ink while the ink tanks are still full. Experienced users know the printer is fine. Those who have recently installed the CISS system are completely bewildered. In fact, everything is in perfect order with the printer and the ink supply system. In order to continue working, you only need to spend a few minutes if you know how to zero the ink level.
Why does the printer warn about low ink when the cartridges are full enough?
The reason for this behavior of the printer is quite understandable. The printer may not realize that it has a continuous ink supply system, continuing to "think" that it uses small cartridges with a volume not exceeding 7 ml for work. That is why, as soon as you use up 7 ml of ink for printing, the printer notifies you of the complete end of ink, requiring you to replace the cartridge. In this case, accordingly, the “droplet” indicator on the instrument panel will light up, and a reminder message will be displayed on the computer monitor.
Resetting Ink Levels on Epson Printers
How do I clear the ink counters and continue using my Epson printer? Here is one of the simplest methods suggested by experts to zero ink in a short time.
If printers with built-in CISS run out of ink counter, do not despair: there are several proven ways to zero the levels. For the first L-series software, it was necessary to enter the reset codes that were on the original ink cans into the printer's print control program. Now you can find the codes you need on the Internet.
On devices without a screen, a drop indicator on the control panel lights up when the ink is low.
In order to reset the level, simply press the print cancel button. You can also use this helpful program to organize and improve your printer. Print Help... Having installed it on your computer, in addition to resetting, you can see the remaining ink, and also reset the working counter. In order to do this, you need to purchase a special key.
Before resetting the counters, be sure to add ink to the donor tanks to avoid airborne airflow and damage to the printhead. The printer will be ready for use in just a few seconds. In this case, printing will resume from the point of stopping, which will avoid rejects during work.
The described algorithm is applicable to the absolute majority of Epson printers. The printer will continue to operate until the next 7 ml of ink is used up. Then the operation can be repeated and your printer will print correctly again.
Zeroing video instruction
Free printer ink reset
Epson L110, L210, L300, L350, L355, L550, L555.Instructions for refilling ink containers
and resetting the printer lock when the ink levels are low.Once again Epson made us happy with its loyalty. In the new L-series printers, namely - L110, L210, L300, L350, L355, L550, L555 - there is NO protection against the use of non-original ink. There are no chips and no codes to enter. Pour and print!
What the users of inkjet machines dreamed of has come true! CISS - on board! There are no restrictions on the use of various inks! All responsibility is the user's risk (a modern car can also be A80 gasoline instead of A92, BUT - not for long).
A small visual guide on how to reset ink levels in printers L110, L210, L300, L350, L355, L550, L555.
This can also be found in the documentation for the printer, but usually no one reads it.After one of the ink tanks is more than half empty, the "Drop" button will blink. It's okay - the printer will print for a long time.
After the "Drop" lights up constantly - the printer will be blocked so that you refill the containers with any ink, and most importantly - reset the ink low error. Here's how to do it all:As you can see, the requirement comes down to checking the physical level of ink in the container visually!
Now, remember the requirement in other models of printers with cartridges that we are used to!
They demand to be replaced! cartridge. And there is no other way. But why doesn't Epson ask you to see the actual amount of ink remaining in the cartridge? Don't you guess? :-)
Okay, lyrics aside. Go ahead (this is just an instruction).
Interestingly, "you can continue using the printer even if there are NO new ink bottles" :-)
Further..
That's all!
No chips. No cartridges. No blocking.
In general, Epson has made the unimaginable - a typewriter.
Previously, they produced machines for "printing money" for themselves, but now they "allowed" to use any ink without restrictions (except for a guarantee).
True, L series printers are much more expensive than the previous series by about 5 times. So they have everything thought out.
Well, for people with our mentality - the main thing is that you can use NOT originals.
This is a very controversial issue and a fairly large number of users are now leaning towards original ink of their own free will, and not coercion from Epson. And it is right! And honestly!P.S. One blockage still remained. But this is not for the sake of self-interest, but for the benefit of the user for. If the diaper overflows and pours onto the table, this is not good, therefore, at the software level (and not at the visual level :-)) Epson left the printer blocking with a large amount of waste ink.
Hopefully soon printers will be shipped with you controllable visually, like this already can be done with ink level!
Every student, office or bank employee uses a printer almost every day - equipment that allows you to print out notes, books, graduation theses, documents. Copies of pages are sharp and effective when the right amount of special ink is present.
Their presence is monitored by an electronic system. After changing ink, an important step on the part of the user is to take a precautionary step. Simply put, we must warn the system about the ink change, otherwise the printer software counter will not be able to display the information correctly. To prevent full cells from being displayed as empty, you need to reset the ink level on the printer.
After you have verified the quality of the ink for the printer and their compatibility with the device, you can proceed to reset the counter. How to do it yourself, without resorting to the services of a service center in order to save money? Try to do this procedure with your own efforts. Of course, after reading the useful material and step-by-step instructions. Don't worry, everyone can reset the ink counter on a printer. The main thing is not to confuse the buttons and act strictly according to the recommendations of experts. By the way, here is an excellent video instruction on this topic. It will help if you perceive the material on a visual level.
It should be noted that there are several ways to reset the ink counter. Let's consider them in detail, capturing information and trying in practice!
The first method is the most popular, affordable and, moreover, the simplest. Find the button with a red triangle on the printer and press it. holding for 10 seconds. After that, the control system will reset and stop monitoring the ink level. It is important to know that the procedure is individual for each specific ink color, which means that you must rebuild the counter for each shade. After your efforts, the program will stop reporting the presence of ink. So, you will have to independently control their level, that is, visually. Agree, this is not very convenient. Especially when you get used to various programs, applications and gadgets. If you think so too, then let's move on to another method.
You can install a utility called Service tool v3400 or General Tools. Thanks to its functions, the counter will be reset. In the window that opens, perform the indicated actions. If, in this case, the counter has not been reset, and the problem has not been eliminated, then it is worth resorting to the third, more effective method.
It is worth noting that the third option is suitable for modern continuous ink systems. It is necessary to zero the chips of the cartridges. Connect the printer to the network. The indicator should be on, not blinking. Open the cover of the printer or MFP. Look for the drop icon in the control panel. It will glow red. Read in detail how to reset ink levels and discover the world of self-reliance! It turns out that no special knowledge and skills are needed for this! Good luck!
