MMS does not work on iPhone 6. Sending MMS with iPhone: All methods and settings

Articles and Lifehaki

Despite the fact that the IOS operating system has the most simple and affordable interface, an intuitive even child, many users have questions about the fulfillment of the simplest tasks of the device - for example, how to send MMS from iPhone?

It should be remembered that to use the MMS function on the iPhone, the corresponding settings of the cellular operator must be sent, and then installed.

The absence of a traditional item "Send MMS", a familiar to most users of ordinary mobile phones, can significantly complicate the task of sending a multimedia message when you buy a new device.

Methods of sending messages

• In fact, everything is much easier than it may seem at first glance. Send MMS-message from the device is 2 different ways.
• So, first, you should open the "Messages" section and click in the upper right corner of the display on the icon where the sheet of paper and pencil is depicted.
• Following this, the menu of creating a new message will open. After that, you can send either the usual SMS, or a multimedia message. With iPhone, you can send saved pictures and photos using MMS.
• In order for the usual SMS to be turned into MMS, you need to press the icon from the left of the field to enter the text on which the camera is depicted.
• If the image is already in the device, you need to find "choose the existing". Either "take a picture", take a picture and click "Send".
• You will need to specify the destination by clicking on the "+" icon, and then enter the text of the message and the topic, after which - select the "Send" button.
• The following way is to go to the gallery and open the "Photos" section, select the corresponding image and press in the lower left corner of the display icon with the image of the arrow, and then select the "Send MMS" item.
• After that, the image is attached to the message, and the MMS menu opens before the user, where it adds the addressee and enters the text and theme of the message. The "Send" button will execute final sending.

Alternative way

There is a 3rd method with which you can instantly send a MMS message. To do this, the user enters the "Camera" section, takes a picture and presses in the lower left corner on the miniature of the resulting photo.

The photo is deployed on the whole screen, after which the icon with an arrow appears down at the bottom. By clicking on this icon, the finished snapshot can be immediately sent by MMS already familiar to the way.

Those who are interested in how to enable MMS on iPhone 6, you first need to activate the function in the message settings section. Next check and adjust network data. Eliminate the error sometimes helps reset parameters and restoring factory settings.

If a failure occurred when sending a multimedia message, the question arises how to enable MMS on iPhone 6 or another device. First you need to make sure that the function is supported by the operating system. Then the network data will then be adjusted.

Why problems arise

Failures with sending multimedia messages arise for various reasons. Most often, network data is incorrectly entered on the device or they are missing. How to enable MMS feature on iPhone 6 in this case? You will need to reset the parameters and enter the correct data through the device menu.

Problems may arise due to the lack of an Internet connection. To check the availability of the network, you need to turn off Wi-Fi and try to go to any site.

Certain difficulties in how to enable MMS function on iPhone 6, causes the system interface, although it is simplified to the limit. The list does not have a familiar link "Create MMS". To find out where to enable the option is to get better familiar with the features of the device.

Several ways to connect the service

Before you include the MMS feature on iPhone 6, you need to check the correctness of the parameters. Act according to the following algorithm.

1. From the main screen, click on the "Settings" icon, go to "Messages". In the list to find "MMS messages" and check if the option is enabled.
2. In the same menu, go to the "Basic" section, where it is necessary to include "Cell data". This parameter must also be active.
3. At this stage it is worth checking the Internet connection. Disable Wi-Fi and exit any site. If the function works, the problem is not in the absence of access to the network.
4. If, after all these actions, multimedia messages are not sent, remove the SIM card from the device, then insert back.
5. In some cases, the device helps to restart the device.

If after all attempts include the MMS function on iPhone 6 sending and does not happen, it is worth correction network data.

How to check the correct network data

To check whether the parameters are entered correctly, you must open the MMS service in the system.

1. From the main screen, go to the "settings", then in the "main" and "Cell data".
2. Next click by "Cell data" and see the section menu. Select item.
3. Wash the list down and find where to enable MMS.

With the first registration on the network, the device automatically finds the operator and enters the parameters. If this did not happen, the fields in this field will be empty. It happens, and with the data entered, the sending and receipt of multimedia messages does not work. In both cases, you need to fill these fields and enter the right data.

You can get parameters via SMS. To do this, contact the operator on the service phone and leave the application. Data can be found directly on the operator's website.

How to return to the factory settings

If the multimedia messaging feature is active, it remains to reset network data. To do this, you need to perform the following steps.

1. We go from the main menu in "Settings".
2. Go to the "Basic" tab.
3. From the list consistently choose the "Reset" items, "Reset network settings".
4. Reload the device.
5. At the end of the reset, turn off the iPhone, remove the SIM card, set it back and turn on the device.

Important: prior to the completion of the discharge operation described in the third paragraph, you will have to wait some time. The process should not be interrupted.

Upon completion of all these actions, you can try to send a multimedia message. If after all attempts include the MMS function on iPhone 6 fails, you should contact your operator. To do this, it is worth calling the service number and listen to the autoinformer instruction.

When talking with a consultant, you need to describe your problem and ask for the activation of the service.

Instructions for new iPhone

The question is how to enable the MMS function on iPhone 6, gets up after purchasing a new device. When registering the device, in most cases the subscriber comes service notification with parameters to access the Internet and sending multimedia messages. It should be saved.

There are cases when applying automatic settings failed. How to enable MMS feature on iPhone 6 in this situation? You can try to enter the parameters yourself. They are on the official website of the mobile operator.

For example, for MTS subscribers at www.mts.ru presents the "Help" section. In the list opened on the left side, the list can be found where to enable your operating system, and click on this link.

The center of the page opens a list of MTS parameters, which should be entered, and a short instruction where to enable the device functions.

You need to go from the main screen in "Settings", then subsection "Cellular communication", paragraph "Cell data transmission network".

The list of parameters allowing you to enable the MMS function on iPhone 6 with the MTS operator, it looks like this:

• access point (APN) - MMS.mts.ru;
• name - MTS;
• password - MTS;
• proxy (in one line) - 192.168.192.192:8080.

To complete the service connection, I send the text MMS to 8890.

What is needed to exchange MMS

Although the menu does not have the "Create MMS" function when the option is connected, sending will not be difficult. There are two main ways.

You need to go to "Messages". Click on the new message icon in the upper right corner of the screen. In response, the field will open.

In fact, through this section you can send any message. To add a picture you need to click on the camera icon, which is on the left of the text input form. In the menu that opens, select: Make a new photo or send picture from your gallery.

When the image is selected, it remains to add the recipient. To do this, click on the plus, then choose contact from the list. It remains only to specify the topic and press the "Send" key.

Important: the message can be sent to a group of users.

How to enable MMS feature on iPhone 6 and send an image directly from the gallery? To do this, on the selected photo, click on the arrow icon, which is located in the left corner at the bottom of the screen. In response to this command, the image send menu will be released. Press the link "Send MMS".

After this command, the field will appear on the screen to create MMS. You can add text to the image, as well as specify the topic. It remains to choose from the list of contacts of the recipient and click on the "Send" key.

Forwarding a new photo through MMS

There is a third way to enable MMS to iPhone 6 and send a photo. Make it can be directly through the camera menu.

Press the miniature of a new photo. After that, it will appear on the entire screen. At the bottom you can notice the arrow icon. If you click on it, the Sending menu will open.

Problems with the exchange of multimedia messages occur for various reasons. Most often this is due to incorrect data. Before turning on the MMS function on iPhone 6, it is worth checking the activity of the corresponding parameters.

If you need to reset the data can be independently. If the restoration of the factory parameters did not help, most likely, the problem of the operator. You should contact your network consultant at the service number.

How to set up MMS on the iPhone?

To enable MMS on your iPhone, you will have to update the iPhone mobile operator settings. This update can be downloaded from iTunes, so to start connect your iPhone to a computer.

After connecting the iPhone, the iTunes program opens. You will see a message speaking about the availability of the settings of your mobile operator.

Select "Download and Update."

Load new operator settings in your iPhone

New operator settings are loaded quickly; It will take no more than 30 seconds. You will see the process indicator passing in the background. Do not disconnect your iPhone during the download process.

After the download is complete, you will see a message saying that the operator settings have been successfully updated. Then your iPhone will be synchronized and a backup will be created, as it always occurs when connected to iTunes. Wait for the completion of the process.

After the sync is complete, you will see a message allowing you to disable iPhone. Do it.

Restart your iPhone

Now you need to restart your iPhone. This can be done by pressing and holding the power button (on the top end of the iPhone, right). On the screen you will see the message "Move to shut down". Do it.

After completely shutdown, the iPhone will turn on it by pressing the power button again.

Transfer and receiving MMS on your iPhone

So, MMS messages must be included.

Return to the message application: When creating a message, you must see the camera icon below the message text. Click on it to add a photo or video.

Also, when watching photos and video files in your gallery, you must see the option of transmitting photos or video using MMS. Earlier only an email transmission option was available.

Congratulations! Your iPhone can now pass and receive photos with photos and videos. Enjoy.

Reading time: 10 min

In this article, I will consider the reasons why the iPhone does not send or accept MMC and what to do in this case to solve the problem.

This article is suitable for all iPhone 11 / XS (R) models / x / 8/7 / 6 and Plus on iOS 13. On older versions may differ or missing the menu items and hardware support specified in the article.

Configuring iPhone to send MMS

To enable MMS on the iPhone, go to "Settings" - "Messages". Activate the appropriate toggle switch there. As a rule, MMS is configured automatically and the input of connection parameters is not required.

Increase

After that, in the settings, enable cellular transmission. Make sure the mobile network operability by opening, for example, a web page. To successfully complete the activation, it is advisable to restart the iPhone. To do this, hold the side button and make the swipe left to right over the pop-up menu. After that turn on the device.

Specify your question by a specialist

Do not know how to solve the problem in the work of your gadget and need a specialist advice?

Increase

Causes why not send MMS

If you have problems with sending MMS, you must first check whether your operator provides transmission of such messages. Perhaps this function is paid and does not turn on automatically. To check the MMS availability, you can contact the operator or enter your personal account on the website or in the company application. As a rule, this setting is displayed in the list of connected services.

Increase

If MMS is not sent, try to do the following steps:

• Make sure to automatically set the MMS settings. To do this, follow the "Settings" path - "Cellular Communication" - "Data Settings" - "cellular data network". There must be written apn, username and password. The corresponding values \u200b\u200bof these parameters should be recognized by the operator. For example, Beeline has:, Beeline and Beeline, respectively.



Increase

• Conflict with iMessage. MMS may not be sent due to the fact that your interlocutor IOS-deva. It is easy to understand the color of the windows: they become blue, and not green. In this case, the transmission is used via iMessage. If you do not use it, then you should disable this feature. Open the "Settings" and select the "Messages" item. Consider that the operator may charge for the re-activation of the iMessage.



Increase

• Send a message as MMS. In the continuation of the previous item, it is worth noting that the message already sent through the iMessage can be transferred to the usual way. To do this, hold the message and in the window that appears select "Send as SMS / MMS.



Increase

• Disconnect LTE. MMS messages can incorrectly work in the LTE network. To disable them, go to "Settings" - "Cellular Communication" - "Data Settings" - "Voice and Data".



Increase

• Hardware problem. Restart the iPhone and try to remove the SIM card and return to the place.
• Reset network settings. Perhaps the iPhone has some kind of software failure, due to which the connection is incorrectly working with MMS. To reset the network settings, go to "Settings" - "Basic" - "Reset".

MMS for many mobile users are an important component of comfortable communication and work. Using multimedia messages, you can send photos, video and audio files. However, to use such a function, you must correctly make settings. So, how to enable and configure MMS on iPhone? We will talk about it further.

MMS setup process

This article will talk about the common one. At the same time, the settings that differ from each other are entered for each individual operator. You can find them on the official websites of mobile operators.

Below is an example of MMS key settings on iPhone:

• you must go to "Home" and select the "Settings" menu;
• after that, you need to press "the main";
• then you need to go to the "Network" section;
• after that, you need to enable the "Cellular data network" option.

At the final stage, the settings of your operator for MMS are made. Find out the settings for your operator subscribers can on their official sites of cellular companies.

Additional settings

After the profile is configured for MMS, experts advise be sure to reboot the gadget. Then you will need to specify the send number or make the number:

• you must enable "Settings";
• go to the "Phone" section;
• at the next stage, you need to choose "My Number".

After that, you will need to make the SIM card number you use. For rooms registered in Russia, all rooms begin with +7.

When the subscriber enables the necessary settings, you will need to restart the smartphone again.Otherwise, the function will not turn on and the subscriber will not be able to accept, as well as send MMC. Only after another reboot you can fully use multimedia messages.

It should be noted that when the subscriber is sent to each message, the camera icon should be displayed to the left of the text input field. If there is no one after another reboot, then you will need to enter all the settings first. The phone will automatically determine the type of message being sent. And if it does not have a photo, then it will go as a standard SMS message, and if the file is added, then it will be designated as multimedia.

Sending MMS.

To add to the message, for example, a photo, the subscriber must be pressed on the icon of the camera. When sending a file to the subscriber, the subscriber is offered to "select the available" or the second option - "make a new snapshot". It is enough to choose the appropriate option, for example, it can make a new snapshot. After that, a new window opens, or rather the chamber window. After the shooting process is performed, and the result suits the user, just press the "Use" button.

In MMS, you can also enable any text and click the "Send" button. After that, the load life will disappear. In the event that the message was not sent, the icon with an exclamation mark will be displayed near the photo. By clicking on it, the subscriber will receive information from the impossibility of sending a message.