Photoshop does not open what to do. Not started photoshop Reading Text Global Resources

Check customized cache levels.

If you set the value 1 for the "Cache Level" parameter in Photoshop Installations, then there may be problems with the performance of the functions that use a graphics processor.

Restore the "Cache" parameter value by default, that is 4:

a. Select the Editing menu item\u003e Settings\u003e "Performance" (Windows) or "Photoshop"\u003e Installations (Mac OS).

b. Set 4 for the "Cache" parameter.

c. Close and restart photoshop.

After restarting Photoshop, repeat the steps that caused an error.

Reset the settings.

When resetting the settings, returns to the default graphics processor parameters. See "Restore default settings" where additional information is provided.

After restoring the settings, start photoshop and repeat the steps that caused an error.

Change the drawing mode in additional parameters to the base.

With the basic drawing mode, the minimum volume of video memory is used and the main functions of the graphics processor are turned on:

a. Select Editing\u003e Settings\u003e "Performance" (Windows) or Photoshop\u003e Installations\u003e Productivity (Mac OS).

b. In the "Performance" panel, click the "Advanced Settings" button.

c. Select "Drawing Mode"\u003e Basic.

d. Close and restart photoshop.

If these actions have eliminated the problem, go to normal drawing mode. Restart Photoshop and check whether the problem will arise again. If it occurs again, go back to the basic mode.

Additional information about the settings of the graphics processor and on their optimization for your workflow can be found in the "Frequently Asked Questions on a Graphics Processor (GP) Photoshop".

Note.

If performance settings change to troubleshoot the problem, you must restart Photoshop after each change.

When using multiple graphics cards with conflicting drivers, problems with Photoshop functions on a graphics accelerator and functions requiring the inclusion of GP may occur. For best results, connect two (or more) monitor to one graphics card.

If you need to use several graphics cards, remove or disconnect less powerful cards. For example, suppose you have 2 different cards for which different drivers are used - the NVIDIA graphics card and AMD card. In this case, make sure that a graphic card of high performance is assigned for Photoshop, and not a built-in graphic card or a card, which is directed to energy saving.

a) Right-click in any area of \u200b\u200bthe desktop and select "NVIDIA Control Panel";

b) click "3D Settings Management";

c) Click "Program Settings" and add photoshop.exe and sniffer.exe. In the quality of the priority graphics processor, select High-performance NVIDIA graphics processor.

elena48966319 Oct 14, 2017 12:17 PM

I saw here themes similar, I did not see the answers, but maybe I will be lucky.

My photoshop is paid, I have been using it for the second year. Suddenly stopped opening. A message appeared that the software license is verified. Then I tried to update it, for some reason, my photoshop became a trial version, after the expiration, stopped opening again. The same message that is being verified by software licenses.

I tried a lot of things, deactivated the application, deleted, loaded again, I checked the host files, as advised on the official website. Nothing helps. I do not know who else to contact my problem.

Representatives of Adobe, why it is impossible to reach you? Where is the contacts, the phone of Russian technical support? Why not? You will continue to make money from my account, but do not solve the problem?

I have been paid for two months, it turns out that they will disappear.

Help me, please solve this problem! I lose work, if I do not decide it.

• Elena48966319 Oct 14, 2017 2:00 PM (in Response to DaveScm)

  Thank You for Your Attention But It DOESN "T Work for Me

  I "VE TRIED EVERYTING WHAT THEY SAY IN Support Theme But It" S No Good. I "M TERRIFIED AND I DON" T KNOW WHAT TO DO NOW. AND I "M SCARED IT WILL HAPPEN WITH MY ILLUSTRATOR TOO. THIS IS A CATASTROPHE.

• Re: Photoshop does not open!

  Elena48966319 Oct 15, 2017 3:23 am (in response to Eleank48966319)

  In general, my problem was decided. In the chat of support service ADOB helped me a person promptly very much. Honestly, I no longer believed that this is possible.

  Same tried everything! I advise everyone who encountered such a chat. Spoke English. So open Google translator if you do not know the language at all.

  I was offered to download the program to remotely manage my computer, I just sat and watched, and after 15 minutes everything was decided. He opened the SS, closed it, deleted all the associated with ADOB in the task manager, then he went on the disk with the Adobe folder and deleted four folders there. Unfortunately, I did not coal, which one. But it was after this that everything worked.

  So thanks to Avinoshu Kumaru! Very grateful.

  I would not have coped myself.

... worked, worked and suddenly today Photoshop stopped running: (.

Initially, it loads so much so much, but at the stage "Reading Text Global Resources" - housing. You have to remove the task by clicking "Ctrl + Alt + Del".

I tried to restart several times, but every time he was vis. I cleaned the registry using Regcleaner, restarted Windows, but it did not help. Reinstalled photoshop from a licensed disk (without deleting, but simply made Repair), but unfortunately it also did not help. And I was still hoping for it.

Even a little in the heart stumbled. After all, I need to work. How will I make layouts to my customers?

Since there was no one near anyone, I decided to ask Yandex by typing a request "Photoshop Reading Text Global Resources". And I found something.

Problem

When Adobe Photoshop CS2 is started, it hangs when a message is displayed in the job window. "READING TEXT GLOBAL RESOURCES".

Cause of hanging

There are assumptions that this problem arises due to the installation of new non-standard fonts or as a result of changes in Windows text settings. I just put the font smoothing in Windows.

There are several solutions. At least three. In Camentas, you can write what method to help you cope with this problem (this may be needed to our colleagues who also do not start photoshop at the stage Reading Text Global Resources).

Solution 1. (I did not help)

Delete file "New Doc Sizes.psp"and restart photoshop.

Note: The file "New Doc Sizes.psp" is usually on the disk

with: / Documents and Settings / [user_name] / Application Data / Adobe / Photoshop / 9.0 / Photoshop CS SETTINGS.

When loading, Photoshop will create a new new doc sizes.psp file.

Solution 2. (allowed my problem)

Delete configuration file Adobe Photoshop CS PrefS.PSP settings.

Updated to Windows 10 faced a problem - the files in Photoshop stopped dragging! You have to open the file through the menu, which is very uncomfortable and long.

Searches for solving led to the results that I want to share with you. Take it, come in handy.

First, simple solution:

If the files are not dragged into photoshop, you need to check the access rights. To do this, click on the program shortcut right mouse button and go to the "Properties" tab where we put a tick "Perform this program on behalf of the administrator".

Immediately I say, this method did not help me, in this case there is a second solution:

1. Go to the start and in the search bar below you insert the command: regedit
2. Next We go on: HKEY_LOCAL_MACHINE\u003e Software\u003e Microsoft\u003e Windows\u003e Currentversion\u003e Policies\u003e System
3. Find the EnableLua section. Opening it with a double click and change the variable from 1 to 0. Save. The computer will ask for a reboot. We agree or reboot manually. We rejoice - now the files are dragged into Photoshop.

Verified personally on:
1. Windows 10 Photoshop CS6 X64
2. Windows 8 Photoshop CS6 X64
3. Windows 7 Photoshop CS6 X64

Updated 01/27/2019

In Win10 Eng, only one way is helped by only one way - we go to the Propirties label in the Compatibility tab (compatibility) Go down Go to Change Settings for All Users Remove the daw with Run This Program AS An Administrator Press Apply - and all the files are dragged. And all these your Anable Loua is a hat, after a change on 0, photos, music, video, skype and other windows scales will not work. Do you need it?

There are special programs just for "broken" photos. They restore the picture on a specific algorithm.
But by experience I can say that it turns out to restore interest 10-15, no more.

well, then it's easier to go to the bank and there to arrange calmly and without any mistakes

is there any difference? just in writing there, but the format is the same

I present you a free program for converting RAW in JPG, as well as to view detailed pictures (EXIF) - ShowExif v0.06-16beta.

Just sobs the letter E in the extension of the JPEG file. And you will be happy.

How to make JPG from JPEG? Win + r write word cmd. , click approx. Write dir folder where photos. Write ren * .jpeg * .jpg. All pictures will become YPG.

In fact, this is the same format.
Its full name is Joint Photographic Experts Group - JPEG reduction.
But in the old operating systems, the file expansion could not be more than 3 letters. Therefore, the expansion of the files of this format has reduced to 3 letters JPG.
And in other operating systems this restriction is not, therefore the expansion has not been reduced.
So there are parallel two extension standards for the same format of the Falov.

If you think only about changing the format, then Paint is the easiest solution.

Well, or instead .jpeg Write.jpg


he speaks:
No different. JPG is an abbreviated JPEG. Expert group by photography :)

How to make JPG from JPEG? Win + R Write the word CMD, click OK. Write dir folder where photos. Write Ren * .jpeg * .jpg. All pictures will become YPG.

Solving problems caused by faulty, unsupported or incompatible GP or graphics driver.

Overview of problems caused by faulty, unsupported or incompatible graphics processor or graphics driver

If you encountered imaging problems, low productivity or malfunction, the reason may be conclusable, unsupported or incompatible graphics processor (also called graphics card, video cardor GP) or graphic drive. In particular, this document provides instructions for eliminating the following problems:

Attention.

If your video card was released after May 2013, it can be assumed that the Photoshop application will support your card. Follow these steps to search and troubleshoot


Update graphic driver.

Updating the graphics driver can fix many problems, for example, troubleshooting, incorrect imaging, performance problems. Get new versions of the driver directly from the manufacturer of your video card:

• Graphic drivers are updated via operating system updates. Make sure that the latest updates for Mac OS are installed by selecting the Software Update item in the Apple menu or in the "Updates" section in the App Store.

After installing updates, restart Photoshop. Enable the parameter by selecting "Settings"> "Performance"> "Use a graphics processor", and repeat the actions that caused the problem.

Note.

• Windows Update Center does not always provide the latest and best versions of drivers. You need to go directly to the Map Manufacturer website to check the availability of driver updates.
• Be sure to select the desired driver. The names of the drivers for laptops are sometimes different from the names of similar drivers for desktop PCs.
• In the case of using video adapters of some manufacturers, you must update the additional software in addition to the video card driver. Carefully read the update instructions and contact the video adapter directly if the instructions are not clear.

Check customized cache levels.

If you set the value 1 for the "Cache Level" parameter in Photoshop Installations, then there may be problems with the performance of the functions that use a graphics processor.

Restore the "Cache" parameter value by default, that is 4:

a. Select the Editing menu item\u003e Settings\u003e "Performance" (Windows) or "Photoshop"\u003e Installations (Mac OS).

b. Set 4 for the "Cache" parameter.

c. Close and restart photoshop.

After restarting Photoshop, repeat the steps that caused an error.

Reset the settings.

When resetting the settings, returns to the default graphics processor parameters. See "Restore default settings" where additional information is provided.

After restoring the settings, start photoshop and repeat the steps that caused an error.


Change the drawing mode in additional parameters to the base.


With the basic drawing mode, the minimum volume of video memory is used and the main functions of the graphics processor are turned on:

a. Select Editing\u003e Settings\u003e "Performance" (Windows) or Photoshop\u003e Installations\u003e Productivity (Mac OS).

b. In the "Performance" panel, click the "Advanced Settings" button.

c. Select "Drawing Mode"\u003e Basic.

d. Close and restart photoshop.

If these actions have eliminated the problem, go to normal drawing mode. Restart Photoshop and check whether the problem will arise again. If it occurs again, go back to the basic mode.

Additional information about the settings of the graphics processor and on their optimization for your workflow can be found in the "Frequently Asked Questions on a Graphics Processor (GP) Photoshop".


Note.

If performance settings change to troubleshoot the problem, you must restart Photoshop after each change.

When using multiple graphics cards with conflicting drivers, problems with Photoshop functions on a graphics accelerator and functions requiring the inclusion of GP may occur. For best results, connect two (or more) monitor to one graphics card.

If you need to use several graphics cards, remove or disconnect less powerful cards. For example, suppose you have 2 different cards for which different drivers are used - the NVIDIA graphics card and AMD card. In this case, make sure that a graphic card of high performance is assigned for Photoshop, and not a built-in graphic card or a card, which is directed to energy saving.

a) Right-click in any area of \u200b\u200bthe desktop and select "NVIDIA Control Panel";

b) click "3D Settings Management";

c) Click "Program Settings" and add photoshop.exe and sniffer.exe. In the quality of the priority graphics processor, select High-performance NVIDIA graphics processor.

This Council is applicable to all types of operating systems, Windows family.

It often happens that when installing and running Photoshop, it "works" - without problems. But it is worth opening any image to edit, as Photoshop inexorably gives an error message. It is also important that this problem is present not only in pirated / unlicensed versions of the program, but also in licensed. Accordingly, it becomes clear that here, the problem is not at all that the unlicensed or licensed version of Photoshop is used. Often, ProgramPhotoshop, issues an emergency completion of its work, due to hardware and software failures, the computer itself. Below, I will give a few reasons for such phenomena and eliminate these phenomena.

• The first and most simple cause is low computer system parameters. That is, your computer does not meet the most minimal requirements, for the normal operation of the Photoshop program. And you can learn about the minimum system requirements for the Photoshop program: https://helpx.adobe.com/ru/photoshop/system-requirements.html. If your computer does not fall under these parameters, you can think about purchasing a new computer. As an alternative, you can try to use the alternative GIMP program: http://www.gimp.org/downloads. This program, in contrast to the "heavy" Photoshop, will work perfectly even on old computers, and in its functionality, not much inferior photoshop and has even a number of advantages. Of course, if you are engaged in professional photo editing, you can not do without Photoshop.
• The second, although not frequent but not a rare cause, the accident program, the use of unlicensed copies of the PHOTOSHOP itself. Although, earlier, I wrote that not only the pirated / unlicensed versions of the Photoshop program, but on pirate assemblies, such phenomena "bad behavior" are much more often occurring. Think about using the free test version of Photoshop, or completely free and legally, you can download old versions (in English) from the company of Adobe. To access the installation files, licensed keys and PDF guides, you must have an Adobe account. Registration is free. You can create an account here: https://www.adobe.com/account/sign-in.adobedotcom.html. Also, do not forget about the alternative - GIMP.
• As possible and strange someone will seem, but one of the frequent causes of "hanging" and "departures" of Photoshop programs, these are viruses. Check your computer for viruses, free and reliable anti-virus utility Kaspersky Virus Removal Tool: http://free.kaspersky.com/en.
• Also, in consequence of viruses, the use of various "cleaners" and "optimizers" of systems, there are system files, get serious damage. Often, such damage, there is also a "freshly installed" OS, due to the use of pirate assemblies. It is worth abandoning the assemblies. Their instability has long been proven by practice. If you have, Windows system files are damaged in a consequence of viruses and other reasons, check their system for the integrity of all system files. According to the results of the verification and in case of problems detection, the system will try to restore damaged files. To check and correct damage, use.
• In my practice, there were relatively rare cases when the Photoshop program did not want to run, or completed its work unexpectedly, due to the lack of some DLL -BBB. In this case, an error should be displayed with the message that the program cannot continue to work / It stops its work due to the missing DLL ... -File (you, it can be called differently, well, for example: FFP 23Ie .dll). In this case, look here and download the desired DLL file. Next, add it to the desired folder. Details, how to do it, read at the very end.
• The culprit of the troubles may be a pirate assembly of Windows. If you have an assembly, I advise you to reinstall the system by setting the clean operating system downloaded from the official Microsoft website. To do this, you can use the utility.
• Well, lastly. A frequent and even very common cause of problems in the work of Photoshop, which is very often encountered - outdated, missing or damaged drivers on the video adapter. In this case, it is worth updating / install / reinstall drivers, on your graphic adapter (video adapter / video card). To do this, you can use the free program that will find the driver for your system and the video adapter and install it. A program for automatically searching and updating drivers: http://drp.su/en.

Conclusion.

If everything is described above, it did not help you, try to enter the Photoshop program and disable the acceleration / draw mode. Open GL. To do this, select Edit - "Installation / Tincture" (in different versions of Photoshop, this parameter is called differently) - "Performance". In the window that opens, remove the checkbox (if installed / stands) opposite the "Enable Open GL Recruitment Recruitment / Enable Hardware Acceleration Open GL / Enable the use of a graphics device" (in different versions of Photoshop, this parameter is called differently). Perhaps this is all you can do.

Added (02/19/2019)
If you fly photoshop when you open the JPG and TIFF files, check out the article. Tips from this notes will be useful not only to the owners of Photoshop CC 2019.

10 DLL files for all browsers

You will need to log in to your computer administrator account - unpack the DLL (do not forget to remove it from the folder! (95x109, 2kb)) (507x67, 7kb) Copy and transfer to: C: / / Windows / System, as well as in C: / / Windows / System32 for Windows 7 64-bit, you must deliver DLL C: / / SYSTEM, System 32, SYSWOW64

The attachment:

2. Filters are updated, as well as version versions, but they do not receive updates on the Internet. Therefore, they are not always compatible with our versions of graphic editors - Photoshop and PSP.
There is a "Patch" program. We just have to download it and with this tiny program to find our filters that do not work in our PSP or PS. This program is compatible not only with 7 versions of Windows, but also with XP,

Download it. here

or here.

And now directly how to set up photoshop!

Change your settings as shown on the screenshots!

The lesson prepared Galina Sokolov.

To set up Photoshop, you need to refer to the window " Installations", Which is caused by pressing hot keys Ctrl+ K. or execution of the command: Editing - Establishment - Basic.

Step 1

In the category window "Basic" Settings for optimal performance PhotoshopCS.6 There are parameters that are provided by default, but for greater convenience, you can add some settings, for example, I added such an option in your settings as "Scaling the mouse with a wheel."

This unit allows you to quickly switch to scale the image, which is very convenient during detailed image processing, for example, during the selection of a complex object when you need to close and remove the image.

Step 2.

Using the interface settings, you can change the appearance of the photoshop program, for example, by default, the black-colored photoshop interface, but you can change it to the brighter: dark gray or light gray.

You can also disable some options that are provided by default, but not as important for work, for example, in the group "The border" You can disable options "Shadows", What will allow photoshop to save their capacities for more important tasks.

If the question about the power of the computer is especially acute, then you can reset the checkbox and in such an option as "Tips", What will allow you to free up additional power, but this is only if you thoroughly studied all the tools and the photoshop menu.

Here you can choose the language of the interface and, of course, I always say that for novice users you should always choose only Russian, which will allow you to master the photoshop several times faster than photoshop with English.

Step 3.

Thanks to category control elements "File Processing" Controls opening and saving files.

When saving files, the dialog box appears where you want to specify the data for saving the image.

Also here is the most important option:

"Automatically save recovery information - every 10 minutes"

Such an installation makes it possible not to lose information in the photoshop failures and such an installation was not in earlier versions of photoshop.

Another important and very convenient option is " Save in background »Which allows you to wait until Photoshop saves the file and allows you to continue to work while saving the file.

Step 4.

Using performance settings, you can increase the efficiency of work. The performance of the Photoshop program directly depends on the amount of computer memory.

Group "Using Memory" Has a field "Busy underPhotoshop.», In which you can determine in advance how many percent of RAM will use your photoshop, for example, in my photoshop this percentage reaches 88%.

Fully 100% should not be given photoshop, as other programs installed on your computer will not have enough RAM.

In a group "Work disks" A disc is marked on which Photoshop creates temporary files and it is desirable that the photoshop itself is not located on this disk, such a distribution contributes to a clearer work of photoshop.

In a group "Optimization of levels of caching and sizes of fragments»The option is established "History of Action", Which characterizes the depth of the steps of history and which can be optimally installed by 15-20 steps.

Characteristics of Kesha levels It is set to maximum - that is, equal to 8 in order to work with the images of large sizes.

Same Fragment size Keshait is chosen big - in my case I chose 1024 kb.

In a group "Graphic Processor Settings" You must select the tab "Use a graphics processor" - This option is responsible for the work of important photoshop graphic instruments.

In additional parameters, you must put ticks, as shown in the screenshot:

Step 5.

This category defines the view of the mouse cursor that is used when working with images. You can choose that cursor you like to use to work.

Step 6.

With the help of the settings of this category, transparent areas are adjusted. As well as cursor settings, the parameters for transparent areas are for cosmetic purposes, so you need to experiment to select the cursor version you need.

Step 7.

Settings category " Units of measurement and ruler " Define those units of measure that you will use when working in the photoshop program. If you wish, you can use for measurement not only by pixels, centimeters and millimeters, but also inch, items, peaks and percentages.

Step 8.

Using the settings for this group, you can choose a color for guides, grids and use the setting of the intervals between the grid lines with a specific number of divisions:

Step 9.

This category uses External moduleswhich are installed in Photoshop.

In order for external modules to work without interruptions, you must install the checkboxes that are in the screenshot:

Step 10.

Category "Fonts" Allows you to manage the mode "Direct quotes", and also use to manage the parameter "Sample size to view the font", which is used in the font menu on the attribute panel and on the Palog "Symbol".

Step 11.

Settings in category "3D" allow you to manage the working environment 3D. In the screenshot you can see which parameters must be installed for the work of the environment 3 D.:

I hope that I answered the question - how set up photoshop.