How to reset the password in Windows 7 using the Password & Registry Editor program. As you know, anything happens in life, even a password for entering Windows can be forgotten, and if it happened, you can easily take and reset the password in Windows 7, pleases the fact that the whole procedure is not completely complicated.
If you forget the password, and you do not have Win 7, and XP or Win 8, then the option discussed below is also suitable for you. If you read these lines and do not have forgotten password problems, I recommend to read to the end and take the information received.
And those who know may need help sympathetic girlthat has forgotten the password on the entrance. An excellent chance to get to visit and heroically return access to PC with a cute lady, well, after .... And after thinking so clear. Girl Sits VK, and you smoke on the balcony! ;-)
Algorithm of action:
- creating a bootable "USB" with the program size of just in (4.12 MB).
- Password reset procedure in Windows 7.
As it has already become clear, we need a plain flash drive, pre-formatted in " FAT32." How to format a USB flash drive, you can read in the article (create a bootable USB flash drive).
Creating a flash drive for a password reset.
Next, we need to choose the section where Windows is located. In my case - this is " / dev./ sDA1 " Opposite each partition on the left you can see the numbers (1 2 3 4). The desired section is selected by these numbers. That is, to choose my " / dev./ sDA1 "And he is opposite the unit, I need to introduce" 1 "And click" ENTER»
As soon as it is determined with the section, and click "Enter" we look at what happens next! As can be seen from the last line, the program itself found the section " Windows/ System.32/ Config"Good, it should be. In this section, there is a "SAM" file, it needs a program, there are "HASH and" passwords.
Here just click " ENTER»
Further look that the program offers us. In this case, we are interested in (Password reset) that is, reset passwords. This parameter is under the number " 1 "Therefore, we enter 1 and as usual, click" ENTER»
Now the program again offers several action options. Namely, open the editor of the system registry, key " 9 "This is not interesting for us!
We are interested in the first option, enter the number "1" and enter
At this stage, the most interesting thing comes. The program brought us all available users in the system. Our task is to choose the user who needs to reset the password.
(Well, you have long had to decide!)
Read more, what's here and how: Here we see in the column " RID»The unique number of each user. Just below I will explain why we need this " RID"Need. Further in the UserName column lists all available users in the system.
Admin.: Actually, soon this user, and reset the password. In a collumn " Admin.? "You can see what it represents, in this case it has the rights of the Administrator.
User.: Normal account not having administrator rights.
4<8=8 AB@0 B.>@ : This is our administrator's built-in account. The inscription in this form, from the Russian-rapid version of Windows.
> ABL: This is not interested in us at all, as it is "guest"
What to reset the user password, you need to enter it " RID"Or his name, if it is in English. We will reset the password using "RID" since, the name enter it simply, and with the "RID" there is a feature that you should know about.
If you look at the penultimate string, you can see such a fragment of the text " 0 x.< RID> »It is to mean that the user number must be entered with" 0 x." That is, Rid Admin-a is such " 03 e.8 "So you need to introduce" 0 x.03 e.8 ».
I enter " 0 x.03 e.8 "And enter.
Now the program knows with which user to work and will offer us 4 options for action.
1
- Reset the password, Simply put, the user will not pass the password.
2
- In this embodiment, you can set the password to the user. Win 7 does not work.
3
- Enhance the user before the administrator, if it is not.
4
- If the user is blocked by admin, you can unlock.
We are also interested in the user's password reset exactly, so we recruit " 1 "And enter.
We see the message "" Good !!! Password reset passed successfully. But to restart and break into the system without a password, it is even early, since it is necessary to correctly complete the operation of the program and save all changes!
Enter the "exclamation mark (!)" And again, as always ENTER
The program again offers to continue working, but we are no longer necessary. Enter "Q" and input.
Now the program invites us to introduce " n.»We agree, enter and enter
On this, everything, the work on the password relief is completed. It remains only to press the key combination "Ctrl + Alt + Delete" the computer will go to reboot. Now you can go under the Admin-number without a password.
As you can see, in fact reset Windows password It is not difficult and these actions can perform any user. I advise you to make a flash drive with this program, so, just in case.
If you have questions about this topic or add-on, then write in the comment, I will be glad!
What if you forgot the password from the computer? This guide will tell you how to do if you forget the Windows password and how to solve this problem without reinstalling the operating system. In addition, we will consider other possible problems with passwords. Windows 10 and Windows 7 operating systems have improved security features compared to earlier Windows XP / 2000 systems.
By the way, it is possible on your PC one of the frequently used passwords, a complete list of popular passwords, see.
In the extreme versions of Windows, a more efficient password system is used, designed to be used in business so that no one without the necessary authority can access information on your computer. This is a stick about two ends. Most users at least once forgets some important password. And then the user / owner of the information becomes the enemy without access "for his computer.
Naturally, for each way of protection there is a way to get around it, especially if you have physical access to the computer.
In this article, we will look at various methods of protecting the computer using the password and how to get around them. We begin not with passwords of user accounts, but with no less important passwords, such as BIOS passwords.
How to "get around" Password BIOS?
Password BIOS. - One of the oldest ways to protect the computer from unauthorized access and one of the most common. Why? This is one of the most effective means if the user does not have access to the system unit. Otherwise, it is like locking the house into a variety of locks and leave the window open.
The default BIOS settings in all system boards do not store password information. So everything you need to do to remove the BIOS password - just reset the current settings by restoring the default configuration. But remember that the reset of the current BIOS settings will destroy not only the password, but all the same settings that you installed yourself.
There are two ways to reset the BIOS settings. Most system boards have a special jumper to clean CMOS (the memory in which the BIOS settings are stored). Usually this jumper is located near the battery on the motherboard, but it is advisable for complete confidence to refer to the instructions from the motherboard. On some motherboards, instead of jumper, there are simply two contacts that you need to close the metal object to reset the CMOS, such as a screwdriver.
If you have a jumper on your board, turn off the computer to clean the CMOS, install the jumper so that it closes the contacts of the jumper, and press the computer's power button. Your computer will not start loading, but the installations in CMOS will be reset. Remove the jumper and turn on the computer again. Most likely, you will see the request on the screen to press F1 to install the BIOS parameters. If you are satisfied with the default settings, press F1, and in the BIOS menu, select the 'Save and Exit' (Save and Exit). After that, the computer will boot as usual, with the exception of the BIOS password.
If you do not know where your board is the necessary jumper or there is no, which is quite possible, you will have to go to another. On each motherboard there is a battery that is a power source for CMOS memory, allowing you to save information. As a rule, this is a standard CR2032 battery.
To clean CMOS, turn off the computer and remove the battery (you may need a thin screwdriver). After 5-10 minutes, install the battery in place and turn on the computer. The default parameters will be installed in the BIOS, and the password will not be. To continue the download, you will need to press the F1 key, and if you set up the default settings, select the 'Save and Exit' menu that appears in the BIOS menu.
As you were convinced, all this is very simple on the desktop, but with a laptop, the BIOS password can become a serious problem. Due to the frequent theft of laptops, the manufacturers take care of accessing, bypassing the password, it was almost impossible. So, if you forgot the BIOS password from your laptop, most likely you will have to contact the manufacturer's service center.
What if you forgot the password from Windows?
If the circumstances have developed in such a way that you have forgotten the Windows password, then, we recommend that you reset it is guided by the built-in account called the administrator. This is done in safe mode, during boot or reboot your PC.
To restore access to your computer, you will need to simply press F8 and in the menu already opened in which some additional options for downloading your operating system will be presented to your attention, you will have to choose the aforementioned "secure mode". Next, you need to select an embedded account, which, by the way, by default, cannot be protected by any password.
If you are all done correctly, since the above-mentioned sequence of actions accurately complied with the above, then you should knock out a window with a message that Windows works in the required, "safe mode" that is as simplified as possible. You will need to click "Yes" and go to the control panel - user accounts where the account icon is the password from which you are your own and want to lose. On the left you must select the "Change Password" item and enter the appropriate window, and after and confirm the new password. Ultimately, that the above-mentioned changes have entered into their legal force, you will need to restart the PC.
How to hack Windows password on a computer or laptop?
In order to do this, you will have to adhere to the following sequence of actions:
- Prepare a CD, or the same flash drive to which a special set of resuscitation programs that intend to restore Windows will be recorded. You will need to insert it into the drive or in the appropriate port during the subsequent reboot of the computer. This resuscitation software package can be prepared independently by downloading a program there intended to separate, save and recover data, or even download some, are ready, RBCD 10.0, for example;
- During the PC start, in order to go to the BIOS, press the "Delete" button. There we will need to change the priority of the installation and assign the computer download from the CD-ROM. After that, we visit our boot disk into the drive and reboot PCs;
- Going into my resuscator disk, which should appear with us after the resuscitation package is loaded, we must select the editable copy of Windows and go to "System Recovery" mode - a section that will be in you at the bottom of the page;
- We are looking for a command line and enter the "regedit" there (we look for it in the dialogs of the same window). We find, and after and allocate the HKEY_LOCAL_MACHINE section, in which we need to choose File, and then Load Hive;
- Open the file "SAM" and select the section - HKEY_LOCAL_MACHINE \\_name \\ Sam \\ Domains \\ Account \\ Users \\ 000001F4. Twice click on the key placed there and go to the very first value located in the string that we need to replace the number 10;
- In the same section, select "File", and then "Load Hive". Click "Yes" to confirm the unloading of the bush. We close the registry editor, thus end the installation process, take the flash drive or disk and reboot the computer.
How to find out the password from the computer?
Question: How to hack the password on the computer, remains relevant until now. Unfortunately, it is really possible to find out the password from the computer, it is possible only correctly in hand in hand. Therefore, if you are not ready to spend a few hours of your free time on this process, we strongly recommend that you just reset it and come up with some kind of new one.
Again, it is much easier to just reset the password and come up with some new one. However, if you need to find out the password, we recommend that you use the program for this purpose what is called, from the image of which you will need to make a boot disk. By setting up the BIOS booting from the drive and installing this program, immediately at the input to the desktop, you will open the window in which you can see usernames, including administrator, as well as passwords from their accounts.
Worth the question: what to do if I forgot the password from my own PC, it is absolutely not necessary to use the above methods of its recovery. Password reset in the Windows 7 operating system, can also be made using the Net User command. For this case, during the restart of PC you need to press F8. Thus, you can open the menu allows you to make additional options for downloading this operating system in which you will need to choose not just "safe mode", and such that would also support a command line. While in it, you will need to choose the built-in administrator account and in the command interpreter window, immediately, after that, the system invitations appear where you need to enter the Net User Name "Password".
We assume that you yourself understand that instead of the "username" you need to enter the name of your local user account, and instead of the "password" you have a new password. If you are all done correctly, in order to close the window, you will need to register on the command line: EXIT and restart the PC.
How to reset the password on windows 8?
In the case of this operating system, things are much simpler! Password reset on Windows 8, can be implemented as follows:
- You will need to click on the login screen to click on the special power icon, which is in the lower right corner of your screen;
- Next you will need to press the SHIFT key and click "Reboot";
- Click "Troubleshooting";
- Click "PC Reset";
- Click "Next" and the system will automatically restart in order to start preparing for the password reset.
How to reset the password on windows 10?
It's not so difficult to reset the password to users of Windows 10, of course, provided if they have access to email, or the same to the phone to which their account was tied. Otherwise, you will have to drop the password from the flash drive, as it has already been described above.
How to reset the Windows 7 administrator password?
Upload the Windows 7 administrator password is best through the Windows command interpreter. Observe the following sequence of actions:
- First, run it. You can do this while holding the following path: Start - Run - Start the program - CMD. In the command interpreter opened menu, you will need to enter: Control UserPasswords, after which you will open the window called "User Accounts";
- Highlight the password account from which you want to reset and do not forget to remove the checkbox of the "Require user name and password" checkbox;
- In the window that opens, you will need to enter, and after and confirm the new password. Next, in the command boot window, you need to enter Exit and restart the PC, as usual.
View passwords that store windows
In addition to the passwords of access of various users, Windows stores and a number of other, no less important: password connecting to the Internet, passwords of mailboxes or access to Web sites. They are usually quite a lot, so it is quite natural that they are forgotten with time.
The operating system offers the "Auto-Fill" function for passwords and other frequently entered information in browsers (Google Chrome, Yandex.Browser, Opera (Blink), Firefox, Explorer 11 and D.R.). So not a rare situation when the user enters the password once, and in a few months, naturally, can not remember it. Everyone understands that important passwords need to be recorded, but they do not all. And if you no longer remember the password, how to find out, because it is displayed in the form of a row of stars: ******?
The solution is offered programs from different manufacturers that can get a password from this row of stars. There are quite a lot of freely distributed programs to decode Windows passwords or hidden passwords from input rows in various browsers.
We will use the program from Passware. This is a convenient in handling a freely distributed program that analyzes the passwords hidden as stars and informs them to you. It is very easy to work with her. It is enough to highlight the string with the password and click the 'Recover' button.
Of course, there are also commercial versions of programs that, as a rule, have a large set of functions. For example, the Password Recovery Toolbox program scans the system and defines saved passwords, data stored for automatic fill, Outlook Express passwords, passwords for connecting to the Internet, etc. This information is then presented in a convenient form. A few more alternatives above the programs described:, or Password Viewer.
Windows XP users passwords
Windows XP stores user passwords in the changed form. For example, Password password will be stored as a string similar to this: 'HT5E-23AE-8F98-NAQ9-83D4-9R89-MU4K'. This information is stored in the file called SAM in the C: \\ Windows \\ System32 \\ Config folder.
This part of the SAM file is encrypted by the SYSKEY system utility to improve password security. The data required to decrypt information after SYSKEY is stored in the System file in the same folder. But this folder is not available to anyone from users. Access to it has only the operating system itself during its work. You can access the SAM and System files only running another operating system or connecting the disk to another computer with the Windows system.
All versions of Windows XP have an ADMINISTRATOR account. This name gives the user full access to the system and the ability to reset passwords of all other users. It can save you if you for any reason can not go under your usual password of the user. The specific use of the administrator password depends on the Windows XP version: XP Professional.
The administrator password is set during the installation of the operating system. If you recorded it or simply pressed Enter, leaving it empty, then you will easily enter the system as an administrator and reset user passwords. To enter the system in the administrator mode, on the screen with a greeting system, press twice Ctrl + Alt + Del, a window will appear to enter the administrator password.
When the computer boots, go to 'START \\ CONTROL PANEL \\ User Accounts' (Start \\ Control Panel \\ User Accounts) and change the required password. Since you are here, it is a good opportunity to correct your error if you left the administrator password empty. In addition, it is desirable to change the name of the 'Adminisrator' account. This name is known to everyone and use it first to access your computer. To change the account name, right-click on the 'My Computer' and select 'MANAGE'. Open 'Local Users and Groups' and open the 'Users' folder. Right-click on the 'Administrator' entry and change it.
XP HOME.
This system will not let you just get access to the computer in the administrator mode. First you will need to download the computer in the protection mode from failures. To do this: restart the computer; Immediately after testing BIOS, press F8 several times; In the menu that appears, select 'START Windows XP In Safe Mode' (download Windows XP in failure protection mode). When the computer boots, go to the name of the 'Administrator'. The default password is missing. Now you can change user passwords by going to 'START \\ CONTROL PANEL \\ User Accounts' (Start \\ Control Panel \\ User Accounts). When you finish, restart the computer in the usual way.
Creating a disk dropping passwords
Windows XP allows you to record information on the usual diskette that provides the ability to reset the password. Naturally, if you have already forgotten the password and cannot access the system, you cannot create any disk, but you will start such a floppy disk in advance to protect yourself from such randomness.
To create a floppy disk: Go to 'START \\ CONTROL PANEL \\ User Accounts' (Start \\ Control Panel \\ User Accounts); Select the name under which you entered the system; In the related task menu, select 'Prevent A Forgotten Password' (prevent password forget); Follow the instructions that running the wizard.
To drop passwords using a floppy disk: If you enter a password when entering the system is incorrect, the system will ask, or you have not forgotten; At this stage, you can use your floppy disk, following step-by-step instructions of the operating system.
Be careful: If you used the built-in Windows capabilities to encrypt files and folders, but did not install the operating system update (Service Pack 1), the password deletes will result in loss of encrypted information.
Windows XP / 7/8 / 10 password change utilities
There are special utilities that allow you to edit or reset the passwords of Windows XP / 7/8/10 users. The principle of operation of most of them is to download the minimum version of an alternative operating system, such as DOS or Linux, which can be accessed by access to files with passwords.
An example of such a utility can be found at this address: http://home.eunet.no/~pnordahl/ntpasswd/ work instructions, as well as files to create Linux boot disk, are available on the same site.
Please note that if you used the functions of the operating system to encrypt files and folders by changing the password using any program, you will lose access to encrypted data. In this case, the following method can help, allowing not to replace the forgotten password new, and know the old one.
Password selection and decoding
If nothing else helps, but you have physical access to the computer, it means not all is lost. You can rewrite Config and SAM files and try to decipher passwords that are stored in them using special third-party utilities. As we have said, this will have to use an alternative operating system, such as DOS or Linux. And when files are at your disposal, you can use one of the password decryption programs, for example, LC4 or.
You will need:
- Access to another computer.
- At least two empty floppy disks.
- An archiver designed to work with the command line, for example, RAR.
- The DOS or Windows 98 boot disk (the image of the required disk can be obtained at http://www.bootdisk.com/) or the minimum version of Linux (for example, Knoppix). The need for boot disks disappears if you can simply connect your hard drive to another computer. If you use the DOS boot disk, and the partitions on your hard disk use the NTFS file system, you will need a program to access them that allows you to view sections in NTFS format, such as NTFSDOS.
- The program for receiving passwords. We recommend using, since the Bat version of this program is free, and the free version of the LC4 is very limited.
Using the loading flash drive:
- If there are sections in NTFS format on your hard disk, copy the NTFSDOS file to your boot flash drive.
- Copy the archiver (RAR) on the boot flash drive.
- Load a computer from this flash drive. If there are sections with NTFS, type the NTFSDOS command, this program will show which letter is assigned to your system disk, and it will be necessary to use it instead of the letter C in the next item.
- Place the system files with passwords in the archive. For example, if you are using the RAR32 archiver, the corresponding command will look like this: RAR32 A -VA: \\ Systemandsam C: \\ Windows \\ System32 \\ Config \\ System C: \\ Windows \\ System32 \\ Config \\ SAM If the files do not fit on one USB flash drive, archiver Asked you to insert the second.
Hacking passwords
Each of your selected programs will display a list of accounts detected in the SAM file. Choose those of them, passwords to which you need to determine. If you are using, select ATACK TYPE: BRUTE-FORCE. If you used only the numbers in the password, check the 'All Digits (0-9)' item. Start the password selection process using the command from the Recovery menu.
The selection of the password can last from 10 minutes to several hours, or even a few days, and it may end up. Especially if letters in various registers, numbers and special characters are used in the password.
This is a good way to verify the reliability of your passwords. If you want to just check your password, do the steps described above and see how long it will take its selection.
Programs for hacking password in Windows
Software that can help you crack a password in Windows There is a huge amount. In addition to the above-mentioned program, there is also Windows Admin Password Hack. But, unfortunately, it is impossible to call it now because it works only in Windows 2000 / XP. Its closest replacement is MULTIBOOT 2K10, which is essentially a functional boot disk.
conclusions
In any case, if someone from your loved ones forgot your password on Windows 7, well, or you yourself have been forced to come across this - do not despair, there are a lot of solving this problem. Well, in order to: how to hack a password on a laptop - you no longer arose, we strongly recommend that you save them anywhere, in notes inside your own smartphone, for example.
We hope that you do not have to resort to the methods described by us. So that such a need has not arise, remember that all important passwords need to record. And if there is a real need to protect information on your computer, use passwords from characters in both registers and numbers and do not use ordinary words. In this case, your passwords will be very difficult to hack.
3 more useful articles:
A program that checks the reliability of user user passwords. This utility uses network administrators to calculate users with ...
A simple utility that allows you to display passwords hidden stars. Compatible with all browsers, among them and ...
Windows Repair is a rare type of program that can save your personal computer almost from all ...
There are situations where you need to create a boot disk or a flash drive, with which you can reset the password. For example, you have entered too complex password and forgot it, now you can not get access to your operating system, or simply decided to be reinsured for the future. Instead of resorting to reinstalling OS, you can simply reset the password using a removable media that can be created in two ways - system and software. About them and will be discussed in this article. The methods under consideration are relevant for all Windows operating systems from 7 to 10.
You can only use this method if you have access to your operating system and remember the password, and you plan to make a discount diskette to make a future. So, to create a boot flash drive or do the following steps:
- To start, insert the USB flash drive into a free USB connector or disk into the drive. You will integrate configurations to reset the password in this removable media.
- Mouse over the context menu icon "Start" and click on the right key, then select "Control Panel". Also to call this window with a list of menu can use the key combination "Win + X". If you have a Windows 7 operating system, then to go to the control panel, first click the left button on the menu. "Start", then select the appropriate item in the list.
- Now go to the account edit menu, which is located in the control panel. To not spend an extra time on its search in additional system folders, configure the display mode of the items through the icons (you can do it by changing the parameter "View" In the upper right corner of the window).
- Now select Menu "Creating a password reset floppy"located in the left side of the window.
- After that, the window opens with the title "Master forgotten passwords". Read brief information about the basic functions of this system utility and click "Further".
- Open the list of disk devices of your PC or laptop and, among them, select your flash drive or disk that intend to use to reset the password (in this example it is a flash drive from the letter G :), then click "Further".
- Enter the password to enter your account and click the left button on "Further". If you do not have a password, then nothing in this field is inserted.
- Wait until the options for your flash drive or disk will be recorded to reset parameters, then click on "Further".
- The process of recording will be held very quickly - in just a couple of seconds. Upon completion, click "Finish".
After the manipulations made on your removable media will be recorded file called "UserKey.psw"which is responsible for resetting the password.
Now that you forget the password and at least once enter the wrong, an additional function will appear in the input window "Reset the password". It will be available only if the removable media is connected to the computer with the reset program recorded.
On a note!This method will work for the account through which you have created a password reset floppy disk.
Video - Create a password flash drive flash drive
Password reset manual when entering Windows 7
Consider how using the created flash drive it is possible to reset the password using the example of Windows 7.
Important! Previously, you must connect the password flash drive.
- When you enter an incorrect password, the Count "Restore Password" appears, here you need to click on it.
- After clicking on the option opens "Password Reset Wizard"read the information and click "Further".
- Expand the list with devices and select your flash drive, click "Next".
- Print a new password twice, click "Next".
- Upon completion of the reset, click Finish and log in, specifying new data.
Software
If you have forgotten the password and cannot enter your account, then the problem is not solved by the Windows standard interface. We will have to use third-party programs. You need to have two components for work:
- another computer with internet access;
- empty CD or USB media recording.
When you made it in their presence, you can proceed to record diskettes for reset. For this we will use the program Online NT Password & Registry Editor. To create a removable password reset media using this program, do the following steps:
- Download the archive with the program files by clicking on the link http://pogostick.net/jpnh/ntpasswd/bootdisk.html.
Scroll down the page down to the "Download" block.
- The site will be available versions for CD and USB media. If you plan to create a boot disk, then download the version for the CD if the USB flash drive is for USB. Then unpack the disk or flash drive.
- Run the console. You can do it with the command window "Run". Open this window by clicking "Win + R"then enter in the string "CMD" and press "OK" or "ENTER".
- In the command line input field, take the command that is depicted in the screenshot below. "E:" In this case, this is the letter of the disk, which is marked by removable medium. If your flash drive or disk has a different letter, then enter it precisely (and do not forget about the colon at the end). After entering the command, click "ENTER". If nothing happened, it means that the command is entered correctly. In this case, the command line will notify you only about errors.
- Insert the flash card or CD into that computer on which you want to reset the password, and turn it on. After that, a window should appear on the monitor, as in the screenshot below. This is a "introductory" information window, so just click "ENTER"To go on. If you do not have this window, then read the instructions for changing the parameters - most likely, your removable media is simply not in the first place in the download.
- Next, the following window will appear, in which devices with an installed operating system will be displayed (in most cases such a device is just one - your hard disk). The device will have a sequence number (in this case "1"), and it is this number that you need to enter into this screen, and then click on "ENTER".
- The program will check the availability of the necessary components on your flash drive or disk. When this process is completed, you will have several options for further interaction (they are also numbered). Enter the number of the option responsible for resetting the password, it is "Password Reset" (here is the number "1") and press the input button.
- Now enter the parameter number corresponding to the editing passwords.
- Next, you will see a computer user table, as well as information about their powers (administrator and guest). These accounts will have its own unique identifier. RID - You need it to enter this window. Enter RID your account and click "ENTER".
- Enter the sequence number of the parameter that is responsible for the password reset Clear User Password.
- If the operation has been successful, you will see the inscription in the window. "Password Cleared". Now enter «Q».
- Enter the command "Y"to save the changes by confirming the key "ENTER". After that you can run your OS without entering the password.
On a note! The program under consideration is not the only one in its own way. There are other password reset programs - for example, Renee Passnow. The functionality of these programs is similar.
Now that you know the password reset methods, it can save you from the need to reinstall the system and can save your system data in a critical case.
Video - boot flash drive for password reset in a couple of minutes
By numerous requests, readers decided to write a detailed and simple instruction, how to reset the password from the user account in any version of Windows: 10, 8.1, 8, 7, XP.
So, you turned on the computer, and the system asks to enter a password to enter. You enter a user password, and it does not fit: an error "Invalid password" occurs. What to do, if no password is suitable, and you need to enter the system? There is a solution - the password can be reset using a special program recorded on the loading USB flash drive. Now I will tell you how to create such a flash drive. 
You will need to take a long time to use anyone. other computer. To do this, contact a relative, a friend, a neighbor, maybe there is a computer at work - I think it is not a problem now.
So, sit down at another computer or laptop. Insert any flash drive to it:
Download the free Windows Password Reset Program. You can download it from the official site (or from my Yandex.Disk): 
Run the downloaded file lsrmphdsetup.exe.: Install the program as usual: i.e. We agree with everyone and in all windows we click the button " Next". In the last installation window, press the button " FINISH"- The program will start automatically and its label will be created on the desktop: 
In the starting window we click the button Burn Bootable CD / USB Disk Now! ("Burn boot CD / USB disk right now"): 
In the next window select Windows versionwhich is installed on that computer where we will then drop the password. Not available Windows 10.but it's not scary: if you have a "dozen", then choose here Windows 8.1. With your discharge.
By the way, on one of the forums, I saw a message that you can create a bootable USB flash drive with Windows 8.1 64-bit, and it is suitable for resetting the password on any version of Windows (I checked on Windows 10 64-bit and on Windows 7 64-bit - so And there is): 
After you have chosen the desired version of Windows - click the button " Next”:
In the next window, put the marker at the point USB Flash. and choose the letter of our flash drive (it is already inserted into the computer). In my case, the letter Flyers: F..
Then press the button " Start.”:
The program will download the necessary components from the Microsoft website for some time:
After that, the program will ask: " Format USB disk now?"All files, if they are on a flash drive, will be deleted. Click the button " Yes”:
Now we wait until the loading flash drive is created:
At the end of the process - click the button " FINISH”:
Everything! The loading flash drive with the password reset program is ready. Take it out and carry it on your computer.
Insert the bootable USB flash drive into your computer. And now the most important thing comes, and at the same time the most difficult for those who will do it for the first time, the moment. We need configure computer download from our flash drive .
Those who can upload a computer from a flash drive - can immediately move to the end of this article. For those who do not know how to boot from the flash drive, I will try to explain as clear as possible:
============================================================================================
In order to "force" the computer to boot not as usual (i.e. from the hard disk), and from the device you need (in our case - from the flash drive) - you need to enable a specific setting in BIOSE Computer.
To get into this very BIOS, we need immediately after turning on the computer to press a specific key on the keyboard (and click more than once, and many, many times until I see the BIOS on the screen).
On different computers and laptops, this key is different:
- Most often used key Delete. (or Del. ).
- Also often bios can be called up F2. (and on some laptops Fn + F2. ).
- The keys are less common ESC, F1, F6 other.
In general, immediately after you press the power button (POWER) on your computer or laptop, then do not wait until Windows load starts, and immediately begin to press many times on the key Delete. on keyboard. After a few seconds (5-10) on the screen should appear BIOS.
If nothing like this appeared, but started like the download of your Windows, then we don't expect anything else: rebooting our computer again (you can directly with the RESET button) and try to press many times the other key - F2..
If you again did not get into the BIOS - reboot the computer again and try to press the following key - ESC. Later F6. etc. But I hope you do not have to experiment so long: in the overwhelming majority of cases, or the Delete key is triggered or F2.
By the way, the hint about which key to download bios usually flashes at the bottom on the screen immediately after turning on the computer. But for some reason no one looks at her, or does not have time to consider.
On different computers BIOS Different, and he looks in different ways.
I have on my computer, for example, such: 
On another computer, he will be like this: 
On the third computer, such: 
That is, I am talking to what to write a separate instruction to each bios is almost unrealistic.
The main thing is that anyone needs to be known to customize the download from the flash drive: in BIOS (as if he did not look like) you need to find a section where the word is present Boot. (from English. "Download"). Turning through the arrows on the keyboard to this section - set first in the list of boot devices flash drive.
In the BIOS, the flash drive can be displayed with its own name (for example, Transcend.) or as USB-HDD.; There are other options. One thing is important: it must be selected as the first device from which the computer will be loaded..
Usually, the flash drive is "raised" to the first place with the arrow on the keyboard, or keys +/- either F5 / F6..
Having setting up the setup in Bios, we must leave it, not forgetting to save the changes made. To do this, go to the section EXIT (he usually the very last) - and there choose the item " Save and EXIT."(" Save and exit "). And then confirm again that we leave by clicking " Yes”.
On this, everything: if you did everything right, the computer will reboot and the download will go from the flash drive (you need to press the Delete key again, or F2, or something else is not necessary!).
Many do not want to even communicate with the creation of a loading flash drive with any software, because They are afraid that still will not be able to adjust the computer download from it. I tried to describe the entire process of loading from the flash drive as it can more. If you caught this text, I hope it became a little more clear and now it remains to be practiced.
===============================================================================================================
So, I created a bootable flash drive on another computer with a password reset program. I insert this USB flash drive into my computer and turn it on.
Immediately, I make a lot of many times the key Delete. on keyboard. After a few seconds I get into BIOS.
I turn with the arrows on the keyboard in the section Boot. (Although in my bios, you can work with the mouse - in the old versions of the bios will not work so).
Here I have the first device now hDD (Achi Po: WDC WD50 ...): 
I highlight this line with the arrow on the keyboard and click the key ENTER. A list of devices from which you can boot are open. In my case, this is a hard drive and my flash drive (it is listed here twice). We raise the first place in the list - flash drive (If you have a choice: USB or UEFI, then select UEFI). We do it using the arrows on the keyboard, or keys +/-
either F5 / F6.:
Now the flash drive in the first place in the list of boot devices: 
Now we leave here, saving the changes. To do this, move the arrow on the keyboard on the last section EXIT. Select line Save Changes and Exit - Click the key ENTER:
Then choose Yes:
After a while, the menu in which the key opens ENTER We choose item Lazesoft Live CD.:
We are waiting for the download: 
In the next window, check the item is selected. RESET Windows Password. ("Windows Password Reset") and click the button Next:
The window will populate a message about the non-commercial use of the program - click Yes:
Podmame again Next:
In the next window select username, whose password will be reset and click Next:
Click on the button RESET / UNLOCK.:
Password Successfully dropped - click OK. Then FINISH:
Go to " Start"And Zhmem. Reboot Computer ("To restart a computer"): 
Press OK:
After the computer reboots, we can log in Windows without password!
We describe the problem
- computer, laptop with Windows XP, Vista, 7, 8
- built-in Administrator user (administrator) is disabled or password is also forgotten
- all users on the Windows login screen under password and you do not know any
- user with a forgotten password - normal local account, not Windows LiveID (with mail)
If something from the listed does not coincide, the recovery process may be different.
Problem solving the problem
What is necessary:
- ability to use Torrent networks
- be able to record an ISO image on disk / USB
- actually the disc itself (CD-R, CD-RW, DVD-R, DVD + R, DVD-RW ...) or any pure USB flash drive of any capacity
- changing computer boot order
The following method and program are supplied by "AS IS" - as it is, are not responsible for possible damage and inoperability. The author used this way on multiple computers and has not yet had problems.
1. Download Bootpass.
BOOTPASS - boot disk (Windows 7PE x86).
The disk contains full-featured programs for resetting and editing Windows passwords, removal programs for extortionable banners
Like most boot discs, they are downloaded in ISO format.
Because the disk image in ISO format is already standard and can record any programs, even standard Windows 8 tools.
Download Bootpass from torrent network (for example, http://rutracker.org/forum/viewtopic.php?t\u003d4487280).
You can download not all files, but only the required BOOTPASS.ISO file.
Others at will:
- ISO-BURNER.EXE is a very small program (646KB) to record an ISO image to disk.
- Rufus.exe or wintbootic.exe to record an ISO image on USB
- text files - for information and instructions
2. Record BOOTPASS.ISO to disk
Now write the downloaded image of Bootpass.iso to the CD-RW optical disc or USB.
There are many recording options, we will show only 3:
2.1 Standard Windows 8
In Windows 8, it is done very easily. Right-click the context menu and select "Write a disk image".
Do not forget to insert a clean drive.
2.2 ISO-BURNER
If this program downloaded this program in the torrent, the window will appear when it starts [Email Protected] ISO BURNER. Total 2 fields - specify the path to the image of ISO, select the CD-RW or DVD-RW recording device. Press "Burn ISO".
2.3 used to Ultraiso
Because it knows how to record and simply files, and ISO images on optical discs and on USB, HDD, can also create boot discs, save in ISO format. In general, an advanced program.
You can download it from torrents, from the official site ,.
P.S. Ultraiso Shareware product, you need to buy it, if you like it. By the way, the recorded disk can be checked, opens in the conductor or not.
3. Change the computer loading order
If your download order is already set first with a CD-ROM (DVD-ROM), or you know how, boldly skip the step.
There are 2 ways to change the procedure for downloading a computer:
3.1 BIOS.
In the BIOS of any computer there are options for selecting a sequence to load the system. If, when you turn on the computer, these options are not displayed automatically, press the F2, or DEL buttons - they may differ depending on the model and assembly of your BIOS.
In the BIOS "I need to go to the Boot section and in boot sequence to select the first CD / DVD boot device.
Save the settings and exit (Save and Exit)
3.2 without BIOS
Most modern computers have the ability to appoint a boot order without entering the BIOS. For this, a quick boot menu is used, which is called by pressing a special key immediately after turning on the computer (for example, F10, F12 or even F8 - depending on the motherboard model).
Usually, when booting the BIOS, it suggests itself on the screen, which key must be pressed.
P.S. The disk must be inserted into the drive.
4. Download disk BOOTPASS
The recorded disk was inserted, the download from the CD / DVD is set, the drive is working, and then we will have such a window.
We have a choice of many programs that resell Windows passwords.
We are enough Password RESET V3.0. If it does not work, you can try others.
- Select a user with a forgotten password, click OK. The program ask whether you are sure of your desires, they answer yes! (OK)
- Next will ask, repeat (OK) or restart (reboot) computer?
- We repeat how much users need to be cleaned from passwords and reboot the computer.
- I confirm the reboot @yes
- Remove the disk from the drive and click OK
5. Check
As soon as Windows is loaded, it will ask what user to choose. Windows will not ask you a password.
If all is good, do not forget to install a new password for your user.
P.S. In the password, use the capital letters, numbers, and even better and the specialime- * - + - \u003d /? ...
P.P.S. You can use phrases as a password (rarely used) written in English layout. For example, "Svyatybagira1002" -\u003e "CDZNFZ
6. What to do if
it did not work out to reset the Windows password
Go to step 4 and try another program.
stopped downloading Windows
Remove all discs and USB. In the BIOS, set the HDD / SATA / SSD hard disk. In the extreme case, launch Windows Restore or call the wizard.
