Next, you need to specify the user on whose behalf the recovery will be performed and enter the password for the selected user, if it has been set. Enter the required information and click "OK". In the next menu, click "Recovery Management". This will launch the recovery utility for your Acer laptop, eMachines or Packard Bell. Minor interface differences are possible depending on the manufacturer. If you used the recovery option using the Alt + F10 key combination, then the system recovery procedure will start immediately from this menu. If you have previously saved all important data to an external medium, select "Restore the operating system to factory settings." You will be warned about the necessary precautions. Click "Next" to proceed with the recovery of the laptop operating system. Then you will be shown information about the laptop hard drive.
Packard bell system recovery
On the black screen that appears, select sequentially:
- the option "Launch Recovery Center" for Sony, or "Fix Computer Problems" for Toshiba, or "System Recovery" for HP;
- menu item "Load Defaults BIOS".
Depending on the manufacturer, the name of the option may vary: “Load BIOS Setup Defaults”, “Load Safe-Fail Defaults”, but the words “Load” and “Default” will always be present. Preparation Prepare for a factory reset:
- before you click on "Load Defaults BIOS", save all the necessary information on removable media;
- since the restore operation cannot be interrupted, connect the device to the network using the AC adapter;
- Please note that when you return to the original settings, all programs installed by the user after purchasing the device will be deleted.
How to reset your laptop to factory condition: acer, emachines and packard bell
Attention
Click Yes and then Start. The dialog box that appears contains information about the hard disk to which the operating system will be restored. Attention! If you continue with this procedure, all files on the hard disk will be deleted. 4. Click OK. The computer will reboot before starting the recovery, after which the files will be copied to the hard drive.
Info
It may take a while, but the Packard Bell Recovery Management window will display the progress of the process. After the recovery is complete, you will be prompted to restart your computer. 5. Click OK. The computer will restart. 6. Follow the instructions on the screen for the initial system setup.
Recovering from the hard drive at boot time To reinstall Windows and all preinstalled programs and drivers, follow these steps: 1.
Video: Factory settings of the laptop Where is Recovery and its activation The hidden partition on the hard disk, which stores all the files necessary for system recovery, is called Recovery. It is created by default on all laptops, and is deleted or damaged in most cases as a result of incorrect user actions. You can see where the hidden section is located:
- in the Computer Management menu;
- See Disk Management.
There you can also see the size that Recovery on HDD takes.
Usually this is 20-25 GB of system information and installation files. If you have a Toshiba laptop, then you probably already noticed that on the D drive there is a system folder called HDD Recovery. It also stores the information necessary to reset the system, so it cannot be deleted.
Instructions for returning a laptop to factory settings
Select a restore point, click Next, and then Finish. A confirmation window will appear. 4. Click the Yes button. The system will be restored using the specified restore point.
Important
The process may take several minutes, and upon completion it may require a computer restart. Resetting the system to factory settings If you encounter problems with your computer that cannot be solved by other methods, you may need to reinstall all programs in order to return the system to the factory settings. You can use the hard drive or pre-created recovery discs for reinstallation.
Attention! A full restore removes all files on your hard drive and reinstalls Windows and all preinstalled programs and drivers. We recommend that you back up any important files on your hard disk beforehand.
Bad request
Activating Recovery starts the process of clearing custom BIOS changes, restoring factory defaults, and reinstalling the OS and system programs and drivers. In order to activate Recovery, press a specific combination of hot keys. This will allow you to enter the system menu where you can select several options for system recovery.
It should be remembered that each manufacturer has its own combination of hot keys, below we will consider the most popular. Restoring settings with hotkeys In order to restore the laptop to factory settings, you should remember a few hotkey combinations. When booting the system, press hot keys to access the BIOS Setup menu, from where you can start the process of restoring the parameters.
How to restore a packard bell laptop to factory settings
Recovering a Packard Bell system is a common question asked by professional sysadmins. System recovery on a Packard Bell laptop is not a very complicated procedure, it can be done in no time without going to a specialized workshop. The main thing is that you will get a unique chance to pump your skills, besides, you can save a small amount and spend it on ice cream.
Packard Bell System Restore is necessary when the laptop starts to run too slowly or refuses to turn on at all. Malfunctioning programs, exposure to computer viruses, etc. can lead to such consequences. All the options cannot be enumerated, so we will immediately move on to a practical solution to this problem.
How to factory reset a Packard Bell laptop
Turn on D2D Recovery, save changes and reboot. Immediately after rebooting, click on the F8 key to bring up the next menu. Select the very first item, as noted in this example. After that, the download of special files and preparation for the responsible procedure will begin.
Next, we need to enter the language parameters and username. In the next menu “Rehabilitation of Packard Bell Laptop, select the last Recovery option. Next, the main stage of our "laboratory work" will begin.
We select the parameter with factory settings. Of course, the program will warn us that all infa will be erased and blah, blah, blah ... Then a window with data on the hard disk partition will open. We check and go ahead. Then another warning may pop up, click OK and watch how the laptop returns to its original state.
At every important event in the operating system, points are created here. We choose the right "moment" and again press "Next". If in doubt, it is better to choose the “oldest” point. The Packard Bell System Restore starts immediately after clicking Finish.
The last window displays the system partition for which recovery is available. The immediate process will start on reboot. Please note that the computer will turn on very slowly. This indicates that the "rehabilitation" of the laptop has been started and after the final boot of Windows, a corresponding message will appear on the display. Safe Mode Likewise, you can restore your Packard Bell system even if the machine does not turn on at all. This is what Safe Mode was created for. If you still do not know, then I give the installation. This is a special Windows startup mode that includes a minimum of programs and services.
There are several ways that we will take a closer look. The option to reset the settings may be needed if:
- you have frequent failures in the installed operating system;
- the installed OS does not boot;
- you need to reset passwords for BIOS and OS (Windows);
- your laptop is "clogged" with unnecessary computer programs that often conflict with each other;
- you changed the BIOS settings, after that the device began to work incorrectly.
What are factory parameters? Factory parameters are set by the manufacturer for a specific model of a computer or laptop. They store BIOS settings and computer configuration parameters.
At the moment of turning on the computer, before the operating system starts loading, hold Alt and press the F10 key. If recovery does not start, then you need to activate the D2D Recovery option in the BIOS settings. You should be aware that changing other BIOS settings may cause the laptop to stop working.
If you have never worked with BIOS settings before and have a vague idea of what it is, then you better start the system recovery environment in a longer, but safer way, which is standard for many computer manufacturers. To do this, immediately after turning on the laptop power, select a special operating mode. system by pressing F8. The Advanced Boot Options menu appears on the screen. Select "Troubleshoot computer problems" and press Enter.
The download of the files will start. Then select your language settings and click Next.
Sometimes a computer owner is faced with the need to clean the system from various bugs that interfere with normal operation. This can be done by reinstalling the operating system or using special utilities. But there is a method that has several undeniable advantages over them.
Resetting the settings to the factory defaults will help restore the device to work in most cases, even if you cannot start the OS. This method is especially relevant for those who do not want to waste time reinstalling the OS. When restoring factory settings, the OS will be reinstalled automatically.
You do not need to enter a second OS activation code. The version of Windows that came with the laptop at the time of purchase will be restored. By rolling back the BIOS, you will fix the listed problems. In this article, we will look at how to return your laptop to factory settings and restore it to working order.
If you have a problem - Packard Bell laptop won't charge, in this case, there are two probable reasons. The first is a malfunction in the power circuit or a problem with the connector. The second is charging or battery problems. Before you draw any conclusions as to why the computer is not charging, it is imperative to inspect the external power supply unit (it is likely that it was the one that failed).
If your Packard Bell laptop stops charging, this may be due to the following malfunctions:
The second case is if there is a problem with the battery itself.
Such an important part of the laptop breaks down quite often. If your Packard Bell laptop stops charging due to just such a breakdown, it is best to simply replace the battery.
Packard Bell laptop battery not charging if she herself is out of order for any reason. In general, there are several main symptoms of a battery malfunction described below.
One of the most frequent cases is a situation when a laptop does not see the battery, while moving the cursor on the panel, you will see the message: "Battery not detected." This happens for two reasons:
- If there is a breakdown in the battery. Then you can simply replace it, choosing with the help of a specialist a suitable laptop for your brand.
- Fault in the power supply circuit due to which it does not charge the battery. Here it will be necessary to do diagnostics in the service.
Does your Packard Bell refuse to run on battery power or shuts down when you unplug the charging cable?
If the laptop does not turn on from the battery, that is, it finds it, but if you pull out the charging cable, the laptop turns off. This behavior can cause the following problems.
- The battery itself is not fully latched, that is, there is no contact. Then you just need to pull it out and insert it back into place.
- There is no battery contact: the contacts are damaged or oxidized. You can determine this visually and clean the contacts.
- The battery is not working and needs to be replaced with a new one.
- Also, damage to the motherboard in the power circuit is possible. We advise you to make a diagnosis.
When the laptop battery does not hold charge, it quickly discharges.
There are two reasons why it won't hold its charge.
- I lost the primary capacity and, of course, the battery does not keep charging. It will need to be replaced or the capacity restored. This procedure can be carried out quickly and efficiently only in a specialized professional telemam service.
- A laptop uses more energy, which causes the battery to drain quickly. The battery may not be able to withstand the increased power consumption. Excess consumption may begin due to the fault of the user: due to the ingress of drinks, any mechanical influences, or due to a malfunction of the microcircuits. One way or another, the exact cause of the malfunction will become known to you only after diagnostics.
If you have problems with your Packard Bell laptop battery - bring it to us! We diagnose the cause of such a breakdown absolutely free of charge, and then the decision is yours: you can repair or replace the non-working part. This can easily be done by experienced masters of our service in a short time!
| Seize the moment: 2 weeks left until the end of the promotion! Seasonal discount 40-70% |
|||
| the name of detail | The cost of components in rubles. | Installation cost (repair) in rubles. |
Order service |
| 1 year warranty |
Call or press The average price of the matrix is 4500 3950 rubles. | 900 | |
| 2900 | 900 | ||
| 1500 | 900 | ||
| 1900 | 900 | ||
| 900 | 900 | ||
| 1100 | 900 | ||
| Battery replacement | 1800 | 900 | |
| from 900 (of your choice and depending on performance) | 900 | ||
| 1990 | |||
| Replacement of the south bridge | from 800-2900 (depending on the laptop model) | 1990 | |
| from 900-2900 (depending on the laptop model) | 1990 | ||
| 900 | 900 | ||
| 900 | 900 | ||
Today's article is about factory resetting Acer, eMachines and Packard Bell laptops. Initially, I planned to write separate articles on them, but later I decided to do with one.
The fact is that eMachines and Packard Bell are the same Acer and the recovery procedure is only slightly different visually, and all recovery steps for laptops released under these trademarks are almost identical, so I will just point out one single nuance along the way. ...
So, if you have not read it before, please read this article before starting the factory reset procedure for your Acer, Packard Bell or eMachines laptop, as it describes the preparations you need to make before starting to restore your laptop from the system recovery partition. Further actions are described on the assumption that you have followed all the recommendations I have given in this article.
Well, do not rush to start recovery until you have read this article to the end.
The Alt + F10 key combination is used to launch the Factory Restore Utility for Acer, Packard Bell and eMachines Notebooks. It is necessary to clamp this combination at the moment the computer is turned on, before the operating system starts loading.
In order not to miss this moment, I recommend holding the Alt key and making quick short clicks on the F10 button.
However, in order for the recovery utility to run in this way, the D2D Recovery option must be activated in the BIOS settings. The desired setting is located here:
If you have never worked with BIOS settings before and have a vague idea of what it is, I strongly recommend that you start the system recovery environment in a slightly longer, but more secure way, standard for many manufacturers of mobile computers.
To do this, immediately after turning on the power of the laptop, start quickly clicking on the F8 key. This is usually done when they want to choose a special boot mode for the operating system. We need the following menu to appear on the screen:
As you can see, at the very top is the item "Computer troubleshooting." We select it (if for some reason it is not selected by default) and press the Enter key. The files will start downloading.
Now you will need to specify the user on whose behalf the recovery will be performed and enter the password for the selected user, if it has been set. Enter the required information and click OK.
In the next menu that appears, click the Recovery Management item.
This will launch the Packard Bell, Acer or eMachines laptop repair utility. As I said, the differences in their interface are purely cosmetic.
If you are going to use the recovery option using the Alt + F10 key combination, then all the previous steps are not relevant for you. The process of reanimating the system from the recovery partition will start immediately from this step.
So, since we assume that all our important data was previously saved, we select the option "Restore factory settings of the operating system."
We will be warned about the necessary precautions that you already know about if you read the introductory article. Click "Next" to proceed with the recovery of the laptop operating system.
After that, we will be shown information about the hard drive of our laptop. Just click Next.
We agree with another warning that all data will be lost.
After that, it will take a little time for the computer to complete the preparations ...
… After which the process of restoring to the factory state will begin. We are just waiting.
