How to disassemble the panasonic air conditioner remote control. How to disassemble the remote from the TV? Do-it-yourself lg tv remote repair

Repair the remote control

Remote control not working.
Each of us sometimes faces the question
How to Repair a TV or DVD Remote Control ?
Everything is simple if you have even the slightest skills in repairing some kind of radio equipment.

I met a bunch of tips on the internet, like, and Is it worth repairing an old remote?? Of course it's worth it. Have you ever seen the offal of your own console and

of the rubbish that you will be offered in the nearest store? Then look:

In the native remote control there is a normal microcircuit on a ceramic base and in a plastic case.
In the cousin - a drop. The slightest blow or bend, and goodbye tracks. And they are sooo thin. And remotes, as you know, love to fly.
Spring contacts in Chinese fakes are usually made anyhow. Rubber bands have a very thin conductive layer and wear out in a couple of months.

And do not be fooled by the beautiful appearance of the new Chinese. It's not for long. You will wipe yourself off and you will not have time to look back.
As a last resort, if you are too lazy to bother with repairing your own remote control, use the Chinese one, but in no case throw away the one that came with the TV. The time will come and you will pat yourself on the head. Like - wow what a malades!

So, let's begin.

Disassembly of a modern console
- a terrible sight for the owner of the device because after unscrewing all the screws, the remote is torn apart like a nut. If there is, hard and thin plastic like a bank card. If not, use a blunt screwdriver. You need to open carefully, but confidently. He won't get any worse.

1 . We take out the batteries and measure with the device. Must be at least 1.5 volts. And you can not show off and just change them for new ones. You should not take super-expensive ones, but cheap ones also have no place in your remote control. For the assholes are flowing. And this is the death of the remote control. Battery electrolyte is not friendly with copper tracks. Or rather, quite the opposite, but it will not help you much.

How can you tell a good battery from a bad one?
You don't need to be an expert to do this. A good battery is usually almost twice as heavy as a fake.
Appearance can also say a lot.

2 . Be sure to look at state of spring contacts. If they are clean and shiny, then move on. If dark or rusty or with a white coating, it's time to sand them with sandpaper or a needle file.

3 . We wipe the surface of the board with graphite contacts with a cotton swab moistened with alcohol. I've been using wet alcohol wipes lately. Having them in stock is a must. It happens that there is nothing to wipe your hands with. And so at least peel off the remote control, at least a kinescope with a thick, thick layer of soot
Ideally, it is better to wash the gum with warm water, a soft brush and dishwashing detergent (Together with the body. It will be more pleasant to hold in your hands) If everything is done in conditions close to combat, then an alcohol wipe will do.
Salo on the remote by the way from our hands. On the insides of the TV and the remote control, a lot can be said about the owners of the devices. Seen a lot in 20 years.

4 . The best way to check the remote control is with a cell phone camera. Unlike our eyes, the camera sees infrared radiation. If when you press the button you see the rhythmic blinking of the LED - happiness smiled at you!

If it blinks without pressing a button, then one of the buttons is stuck, or there is too much kaki on the board.
By the way, the camera is unlikely to help you with this. There is an infrared filter and you will not see anything.

5 . If there is no reaction to pressing the buttons, the first thing to do is to replace quartz resonator. It can be of different types and you need to replace it exactly like that. In appearance, its integrity cannot be determined in any way, but believe me - this is the most fragile part in the remote control. Change it and you'll see. The detail is cheesy.

6 . Least likely to die Light-emitting diode. Instead, put any infrared, close in parameters and size. Or from another broken remote control.

7 . If your buttons work through one, you can:

but. Use a repair kit of nickels and glue.

b. Take supermoment gel and foil from a cigarette pack, it is made specifically for this purpose. One side is conductive, the other is paper, on which glue is applied. Piglets are cut out a little larger than the size of the button, with a toothpick we drip glue on the elastic band and with thin tweezers we sculpt a nickel and press it down.

in. Conductive varnish. It is profitable to buy only if you often repair the remote control, because a good one is expensive, and a bad one does not cost itself anything.

8 . There are still cracks in the board, remotes eaten by dogs and other rare occurrences. Here it is necessary to judge its maintainability solely in appearance.

Good luck to you!

The panels are not very different from one another. The repair technology is the same. Do the operations given in the article in sequence, from simple to complex, and you will succeed. First, change the batteries and clean the contacts, if it doesn’t help, take it apart, see if there are any external damage. Etc.

If the remote does not work, but you need to make it (a rare remote, expensive, or you just want to master it yourself), register on the forum:

and ask a question there. And we will definitely win.

If the remote control is rare, then a photograph of the board from both sides is highly desirable, with sufficient clarity to see all the details. It’s better to write a background right away - he fell, water got in ... And what they themselves did to make it work.

Added December 25, 2015.
If your remote stops working after being dropped, replace the quartz first., and then check the rest of the circuit. As a result of the fall, it is he who most often suffers. The main thing do not start scientific research — just replace the quartz with the same.

A TV is a technical apparatus, a complex mechanical system operating on physical-optical, wave and other principles, and, like all technology, it is prone to breakdowns. The same applies to the well-known control panel, the primary sample of which was created by Nikola Tesla himself in the late 19th and early 20th centuries. To date, breakdowns of the control panel are not uncommon, but what to do in such a situation, and whether it is possible to cope with the problem on your own - more on that later.

What is a TV remote control

Over time, remote controls became more and more perfect and self-sufficient, which led to the creation in the second half of the 20th century of a remote control (RC) capable of making an industrial machine work from a distance.

This device is being improved to this day and allows not only from close range, but also from other rooms, rooms to control household appliances, in particular the TV, without much difficulty.

What to say if you managed to create a car or even a helicopter on the remote control. Among the manufacturers of high-quality equipment that have gained a foothold in the market and have earned a name for themselves, there are several - Samsung (which you can read about in more detail below), Philips (Philips), Sony (Sony), Panasonic (Panasonic), LG (LJI), as well as a set of common models e.g. Supra, Mystery, adam24p20g board based models, rmctph1ap1, rmctpj1ap2, z1025, rmctpf2ap1.

The classification of remote controls for TVs depends on a variety of criteria, for example:

Consoles with one built-in program, acting only on its basis.
Universal control panels - those that include several programs at once.
The so-called learning consoles, which means that with due desire and minimal skill, you can program such devices to your taste and make them literally for yourself by adding new programs.

The TV remote control works most often based on infrared electromagnetic radiation, which the human eye does not see, but allows you to give commands literally from almost any distance. The principle of operation in general terms is an interconnected system of programmed commands, activated by pressing a certain button, giving a signal to further details and so on through magnetic waves all the way to the TV itself.

Parsing the remote control from the Samsung TV

As already noted, one of the most common and well-known manufacturers of television devices and remote controls for them is Samsung, which today has a bright reputation and firmly holds its position in the market.

A relatively recent development from Samsung Smart TV deserves special attention.

In a short time, Smart TV has earned public recognition and a high rate of positive feedback. The most convenient and most sensitive touchpad (sensor) is built-in, which allows you to quickly and habitually work in an accessible browser or perform other commands, as well as a host of other obvious advantages.

The smart system, like the remote control for the TV with it, is the most convenient service that has the following features and benefits:

Allows you to control several devices at once, starting with the TV itself, which has the Smart program, including the set-top box connected to it, and ending with other native programs and players.
Convenience and modernity, because this program is connected to the network and allows you to most comfortably adapt your TV and DVD to your tastes and quickly adapt to new preferences.
Manufacturability, which is determined, for example, by the ability to control through search using voice commands, the presence of a modern and high-tech tuner.

It doesn't matter if you lost the remote control, because the program allows you to install the application on your phone - it will be like a replacement for it, as well as a preview of some functions in the radiotelephone. Ease of connection, because, like almost everywhere, you only need an audio cable.

Reasons: why the TV does not respond to the remote control

Most of us have experienced the problem when we desperately try to switch to our favorite TV channel, pressing all possible buttons and making all possible attempts, but alas, the remote does not show signs of life, some heat up after turning on, and the TV will not respond to its imperatives, and the channels do not switch or only with difficulty, and the buttons themselves are either not pressed at all, or to no avail, whatever they do. Well, if the TV turns on.

The nature of such problems may lie in the following possible aspects:

The energy of the batteries was simply used up, which is why the remote control began to lose contact with the TV, because it is with the help of it that the basic impetus to the functioning of the device occurs.
They stick, sink (jam), the buttons themselves do not work well, which can be found on the remote control, which was previously filled with liquids, received mechanical damage or was misused, which is also a fairly common ailment of all remote controls.
Natural wear and tear, which means erasing or mechanical damage to the surface that receives the signal, due to which the entire remote control in the complex stopped working (button coating or touch plates under the buttons).

Temporary wear and tear is also quite likely, since I don’t always wash my hands before using the remote control, and many people like to have a bite to eat something that leaves large particles of seasoning, crumbs and the like, which will eventually clog the internal cavity of the remote control.

This breakdown will not allow all, or only some of the most important parts, to work.

Do not rush to throw away the device with the black inscription “Broken” and shake your wallet in anticipation of a new one, because often remote control malfunctions can be solved by yourself and as soon as possible at home by disassembling and briefly repairing.

Instructions: how to clean the TV remote control

Let's start with the most superficial and simple task - to clean the control panel with our own hands, and thereby restore its performance and functionality. It should also be indicated that the remote control should be cleaned periodically.

In order to realize our plans, you should first deal with the main components of each remote control, the scheme of which looks like this:

The body is the base, on the surface of which there is a touchpad or buttons, and in itself - the entire mechanism of action.
Covers in certain areas of the body, designed to hide and additionally fix the batteries and all other elements of the remote control.
A printed circuit board or microcircuit, to which a rubber contact plate is attached and adjacent, designed to convert the signal of a certain pressed button into a sequence of electromagnetic pulses with their subsequent transmission to the TV.
An emitter (a system of two transistors, resonators, capacitors and resistors), which actually performs the function of the genesis of electromagnetic waves.
A plate of plastic or rubber buttons.

As for the process itself, cleaning the tricolor remote control inside looks easy. It is necessary to prepare a repair kit with the necessary basic tools with which we will reanimate the device. We unscrew the bolts or screws, open the latches and expose the insides of the patient, it is best to open the case with a plastic or thin metal card so as not to tear or break the clamps and latches.

We carefully take out the board, and if there are clips on it, we first open them too. Next, you should get, as a rule, rubber buttons. Wash the parts, while everything should be done very carefully.

Electromagnetic parts are best simply wiped thoroughly with a damp cloth or rag to remove dust.

The board (microcircuit) should be gently wiped with a small amount of alcohol, but lubricating the rubber plate is unacceptable, because there we risk washing off and erasing all the necessary contacts.

A distinctive feature of LG remotes is that the buttons are mainly built into the top panel of the case and are not removed along with the internal components, which makes them somewhat difficult to clean, but this is solved by putting a thermal cover or other film on it.

Schematically, the analysis of the LG remote looks like this:

First you need to get the batteries behind the cover on the back of the remote control;
Gently draw a thin surface along the slot, unhook the clamps, open the lid;
Remove the board and remove the rubber contact plate;
After carrying out the necessary procedures, assemble the remote control in the reverse order.

Fundamentally, the disassembly of the LG TV remote control does not differ from the disassembly of any other remote control, with the exception of a number of special properties inherent in a particular manufacturer. After all that has been done, you should dry the elements with an air conditioner and assemble in the reverse order, then check the operation and the remote control for operability and proper assembly.

This can be done using any camera that the remote control sensor is pointing at and any button is pressed.

After the final check - feel free to use the remote control. Using this procedure, you can significantly improve performance and even return the remote control to its original quality, even for those who are not particularly versed in technology.

The nuances of repairing remote controls for a TV

As noted above, you can carry out initial preventive maintenance and restoration, or you can repair the TV remote control in more depth without preparation.

However, the following should be taken into account:

If you want to repair the remote control, you can do it yourself.
They will take a decent amount for banal operations for the work, if we are not talking about replacing the main components, which, by the way, you can also replace yourself.
Most likely, it will take time, at a time when personal repairs will cost a maximum of an hour of free time.

However, if it comes to serious damage, for example, to the board or contacts on the rubber plate, in order to replace it, the services of a qualified specialist may come in handy to repair and restore it.

Do-it-yourself TV remote control repair steps

We consider the case of a serious internal breakdown, when the total mass of buttons works, and random buttons that break most often, such as Guide on Philips models, Set, Select, Source, Pairing and other standard ones.

In this case, you should do the following:

It is necessary to disassemble the remote control according to the scheme described above;
Next, you should clean everything according to the scheme described above;
Thoroughly clean the pad and record from grease and dust;
Apply glue to the non-working button;
Pour a small amount of pre-prepared graphite (you can tear it off a graphite plate or pencil);

Complete disassembly of the TV remote controlSony BRAVIA

The remote control from the TV can fail at any time. And if you were wondering how to disassemble the Sony BRAVIA TV remote control, then you definitely need our help.

We often encounter button sticking on this device, this can be easily dealt with at home. Secondly, the remote control needs to be cleaned from dust and dirt. Often, due to the ingress of foreign objects into the device, it starts to work incorrectly.

So let's get started. First, take a small screwdriver and unscrew all the screws you see. It's not hard, just be careful.

The remote control is not very hard to open, but you should use a knife and use it to push back the latches, thanks to which it closes. First, open it slightly, but do it in such a way that the appearance of the device is not affected. You need to separate the top of the case from the bottom.

The keys of the device are rubber, they can be wiped clean with a damp cloth from dirt. The microcircuit, if it has stopped working, can also be wiped with a solution containing alcohol. Just don't overdo it. Let the parts dry thoroughly before assembling the device.

The remote control will work stably and correctly only if it is properly assembled, also please note that if any parts of the device are damaged, it will not function even after you disassemble it.

How to repair a remote control with your own hands - this question very often arises among consumers of electronic equipment. try to count how many of them you have at home and don't go astray. TV or even several, music center, DVD players, video projectors, receivers, satellite boxes, IP TV, air conditioning, Fans are now controlled by remotes. You get used to it conveniently, and when the Electronic Assistant fails, it becomes sad. Questions arise why the remote does not work? how to repair the remote control yourself, how to make the remote control work again, how and most importantly Where to fix the remote control? But it turns out that you can fix the remote control with your own hands. Remote control malfunctions, in most cases, are easily corrected.

First you need to determine and make sure that the remote control is really broken, and not the controlled device. How to do? Reading and doing...
How to check the remote control.

You need a phone with a camera, or a camera. The camera is already present in almost all phones, except for the most basic ones.
We enter this mode on the phone, check the remote control,
direct the emitting window at the camera
press any or more buttons.

If the remote control is active, on the phone screen you will see how a small light flashes in the window,

If there are no flashes, then the remote is broken.

There are faulty remotes, when there are flashes without pressing the button, this signals the closure of some button or its contacts. How to fix a remote control with such a defect, read on ... Do not forget about the batteries, you should replace them with new ones, check the contacts, remove oxides. Batteries for remote controls should be good, . Contacts from cheap batteries often corrode. How to repair a remote control with such a malfunction? Be sure to completely clean the contacts from plaque to a metallic sheen and moisten the contacts with a liquid with a high alcohol content. If you doubt the suitability of the batteries, you can temporarily put them for testing from a working remote control. If this does not help and the remote control does not work, we proceed to repair the remote control with our own hands. To do this, you need to disassemble it.

Remove the cover and remove the batteries. Inspect the remote control housing for mounting recesses. Often there are self-tapping screws under the battery cover.
It is very common to fasten parts of the remote control case with clips and glue, so it is impossible to disassemble them without damage. Opening such a remote control should be done carefully so as not to injure your hands and break the instrument. With a nail file or a spoon that fits well into the groove between the top and bottom of the remote, gradually snap off the clips or break the glued groove, prying the bottom of the remote and effortlessly moving around the case. The split console consists of
Boards, with an integrated microcircuit, quartz, infrared diode, contacts on the board, buttons, conductive tracks, contact group for power elements.
Rubber button mat with conductive contacts
Two-piece body and sometimes a transparent plastic window
Frequent malfunctions
The buttons on the remote get stuck.
you have to press hard on the buttons
Only works at very close range
The remote if you hit it works, then it does not work

The main reason why the buttons on the remote do not work is the contamination of the button contacts. Dirt can interfere with closing the contacts of the buttons, or vice versa closes them. And the operation algorithm of the remotes is such that when several buttons are pressed at the same time, the command from the remote control is blocked and, of course, the remote control does not work. Therefore, it is necessary to clean the contact pads on the board and clean the contact patches on the rubber mat. There are two types of contact patches for buttons.
With graphite coating and with conductive rubber. Graphite coating gradually wears out and leaves marks on the pads of the board, contaminating and shorting them. If you are lucky, you have a remote with conductive rubber, but even here, over time, problems with dirt and oxides appear. The contact pads on the board can also be made in different ways, either with graphite sputtering or copper conductors.
Often, when you open the remote control, there is oily dirt on the board, this is fat condensation from the skin of your hands. If you have been using the remote control for a long time, this dirt will already be on the buttons and the case on top in a dry form. When you have to press the buttons with force in order for the remote to work or they are poorly pressed, this is 100 percent pollution! If you take the remote apart, you will understand what I am talking about. I have a clean one in the photo, later I will definitely replace the photo, where everything will be clearly visible. How to repair the remote control with your own hands with such a disaster? If the buttons are not coated with graphite, a good cleaning will help.

We clean the board with a cotton swab dipped in alcohol or vodka, do not use colognes, they leave a film and it will be even worse. We wash the rubber keyboard and case in water using a grease remover and a stiff brush from an old toothbrush. Dry well. With an eraser, we go through the rubber heels on the rubber mat and the contacts on the board. We collect and check the remote control. Works great! The site "How to do it yourself" helped you.

How to make for remotes with graphite coating on the buttons, the restoration of contacts is described below.
How to repair the remote control with your own hands for other malfunctions

If the remote does not work after that, then in order to fix the remote, you will need some knowledge of electronics and the ability to solder.

We check the soldering of contact springs for batteries on the board and the soldering points of the emitting diode. We carefully inspect and solder defective solderings.
The remote stopped working after being dropped.

I want to warn you, sharp blows are dangerous for them, ceramic quartz on the board is very fragile. To make the remote, you need to replace it.
Remote only switches from close range

Perhaps the batteries need to be replaced or the emitting diode is dead. First, we check the batteries by replacing, and if there is no result, we change the emitting diode.
The buttons on the remote do not work.

Sometimes cleaning does not help, the rubber loses its electrically conductive properties over time, or the graphite coating on the patches of the rubber mat wears out. How to fix a remote with such buttons? Using a remote control repair kit. This includes a small tube of silicone adhesive and conductive rubber pads.

The old patch is carefully cut off with a blade and a new one from the set is glued in its place. The kit is enough to repair 3-5 remotes.

Another option on how to make the remote control work is to use the "contactol" electrically conductive glue, which we apply to the fat-free patches of the rubber mat. But these methods of restoring remotes are expensive and make sense when you need to repair a lot of remotes or the remote cannot be found on sale. Chips in remotes fail very rarely. I also advise you to pay attention to mechanical failures.
broken tracks,
bad soldering,
shorting at the intersections between the printed track and the graphite conductors, if any, they are applied on top of the former. The latter is very insidious, and can manifest itself at times. You should pay attention if the batteries in the remote control are quickly discharged.
I will add that such malfunctions are typical not only for remote controls, all devices where there are such buttons suffer from this, but they can also be repaired with your own hands

How to disassemble the remote control from a Samsung TV and 4 more companies

You can disassemble and repair the TV remote control yourself, if you correctly approach this process TV has long been an integral part of modern life. Almost every house has at least 1 TV, and in most cases 2 or more, depending on the number of rooms and the wishes of the household. And everyone who has such equipment knows what a remote control is - a remote control. In addition, almost half of the families encountered breakdowns of the TV remote control and know what repair of the remote control is. Most often, people downplay the value of the remote control, you should not do this. Better spend some of your time on repairs.

TV remote control manufacturers

As already noted, in a house where there is a TV, there is also a remote control. Each company itself is engaged in the development of remote control for its equipment, which guarantees not only the appropriate quality, but also that the remote control will always fit the TV that you bought. It also allows you to quickly pick up a new remote if the old one is broken. You can pick up the necessary spare parts much faster if it was decided to repair the remote control with your own hands.

Among the main brands of TVs and remote controls, we can distinguish the following, the most popular manufacturers:

Samsung;
Philips;
Panasonic;
Sony;

Repair of the TV remote control, as a rule, depends on the manufacturer

Samsung appliances are best combined with accessories of the same brand. In addition, there are remote control options for each specific model of TVs, players and set-top boxes, including those related to the Smart system. Panasonic, just like Samsung, develops remote control models for each new TV model created, but recently the manufacturer has been trying to create an option that will not only fit a specific type, freely manage all new models from the company. Which, of course, will help save both in material terms and in the efficiency of replacement.

It is logical that 1 universal remote will take up much less space than, for example, 2, 3 or more.

At the very beginning of work, both the TV and the remote control usually show their best sides, but it happens that over time you begin to encounter various problems in the operation of the remote control of your device and, most often, such problems begin abruptly, and the person does not know what happened , and how to change it. The question is: what went wrong? Is something wrong with the TV or with the remote control?

Reasons: why the TV does not respond to the remote control

It doesn’t matter which company is the leader in the production of TVs, Samsung, Philips, Sony, Panasonic, LJI or some other company, all equipment can fail in its work sooner or later. And these failures are not only very unexpected, but also quite serious. Before you panic when the TV cannot be turned on with the remote control, you should check if the TV itself works at all?

If the TV does not respond to the remote control, then you should check the connection of the equipment to the power source

For this you need:

First, check if the equipment is connected to a power source. Even a small child can handle it. If the TV plug is connected and the current is supplied to the outlet, but the TV does not turn on, check the wire itself, it happens that the cable from the TV to the plug is frayed, bent, etc.
If both the plug and the cable are in order, and there is current in the outlet, and the TV still does not want to turn on, then try starting it using the button located on the body of the equipment itself. If the equipment does not respond, then it is worth sounding the alarm and checking the performance of the TV itself.
In the case when, when turned on with a button on the panel, the TV works as if nothing had happened, but does not want to respond to the remote control, the question arises of why this happened. Most likely, in this case, the problem is specifically in the remote control.

If repairing a TV at home is almost impossible, and experts advise you to contact the masters in case of such breakdowns, then the remote control can be repaired on your own. But first of all, they must determine why the TV stopped responding to its native remote control.

Examples of breakdowns due to which the TV remote control does not work

In addition to the fact that the remote control may completely refuse to connect and work with the TV, other problems may arise in the event of a breakdown in the remote control. For example, the remote control does not switch channels well, when you press some buttons, the equipment reacts as if other buttons are pressed - if you decide to switch the channel, and instead of turning on the next one, the remote control starts to increase or decrease the volume of the TV, etc.

Sometimes the buttons are pressed with difficulty, stick, react from the second, third or more times.

The reaction of the TV to the remote control is possible only in conditions of close range. This can be noticeable if you turn on the TV from different parts and corners of the hall. For each of the breakdowns, there is a reason that causes one or another malfunction, and it also happens that at one moment several reasons came together at once, and in this case you can get a very serious problem.

You can get acquainted with the most popular causes of remote control breakdowns on the Internet.

Among the causes of breakdowns are:

Small children. As practice shows, in families with small children, it is they who cause the remote control to break. A child, out of ignorance, can wash the remote control in a bucket or in the bathroom, throw it against the wall, etc. If just such a reason has been identified, then it will be easiest and most reliable to replace the old remote control with a new one and hide it away from children's eyes.
Batteries. As you know, in television remote controls, energy is obtained on the basis of AA batteries, which are inserted into a special compartment. In order to restore the functionality of the remote control, the usual replacement of batteries or accumulators can help.
Scheme. Various breakdowns can also be hidden in the remote control circuit, ranging from loose contacts to more serious problems. A popular example of a microcircuit is the Adam24P20G circuit.
Quartz remote control device.
Buttons. The special gasket between the circuit and the buttons may become thinner.

Many problems can be identified even in the early stages, for example, by the appearance of the remote control. If you notice that the body is melted, cracked or gnawed, then this should lead to the idea that perhaps there is already a problem inside, which in the future will lead to a complete failure of the equipment to work. Some problems can be identified and eliminated in the early stages.

Do-it-yourself TV remote control repair steps

Knowing the reason why the remote control broke down, you can decide what should be done to revive the remote control. Most often, the remote control has malfunctions, some of which are able to fix on their own. Consider a few examples of how to restore the remote control. Insufficient power supply to operate the console circuits. In this case, most likely, a simple battery replacement will be required.

In order to properly repair the remote control, you must perform all the steps in stages

Here you do not need to disassemble something, solder - you just need:

Open the remote control compartment;
Remove old batteries;
Replace them with new ones.

If the buttons respond poorly to pressing, you will have to disassemble the device in order to check the integrity of the gasket between the buttons and the remote control circuit. Disassembling the remote control is a matter that requires appropriate preparations. First of all, you should have a set of small-section screwdrivers, both flat and Phillips, at hand. In addition, disassembling the remote control will come in handy when you need to lubricate certain parts of the device.

If the hull breaks, it is best to replace it with a new one, or repair or fix the wreckage with improvised materials. Insulating tape is our everything.

When you know what to do, you can manage on your own. In addition, all these examples will be useful when deciding to repair the remote control with your own hands. But still, sometimes you should entrust this work to craftsmen who have been repairing such equipment for more than a year.

The check of equipment, most often, stops after the TV itself is checked, especially if everything is checked on the basis of the store. This leads to the fact that any problems with the remote control begin to be noticed much later, when it is already almost impossible to exchange the remote control or repair it under the warranty card. It is believed that the remote control is not such an important element of the TV, but it is not. Any remote control should be checked thoroughly.

You can check the remote control at home without resorting to the help of specialists

Subject to verification:

Remote control for smart system. For example, it can be the RMCTPF2AP1 and RMCTPH1AP1.
Ordinary standard remotes, for example, from Samsung - TM1050.
Consoles of popular companies: LJI, Sony, Mysteries. For example, LG Magic Motion Z1025.
TV tuner remote.

Do-it-yourself TV remote control repair (video)

In conclusion, the question becomes relevant - what is needed in order to check the operation of the remote control at home? First of all, observe the reaction of buttons, for example, Pairing or Select. For most models of modern remote controls, these buttons should be illuminated if the device is in working condition.