A fairly limited number of subscribers know about the availability of such a service as “second line”. So they have to languish while waiting for the moment when the called interlocutor finishes his conversation. One of the leaders of the domestic mobile market, the operator MTS, provides this service with the corresponding option - “Call waiting and holding”. To find out how the Second Line of MTS functions, you just need to read the proposed article.
Using a second line is the only chance to keep two subscribers in touch at once. If you hear periodic beeping during a conversation, you will be notified that a call has arrived from another subscriber. You can accept it with one click of your finger. In this case, the previous interlocutor will have to hang on the line for a bit. The situation will be similar with outgoing calls. It will not be difficult for you to put the first subscriber on hold and dial the number of the second.
Operating principle of the MTS Second Line
The presence of another line will allow you to find out about the second call in the current call mode. Once in front of a conversational interlocutor, the caller will be able to hear not the usual “hang up” sounds on the receiver, but a polite request to wait a little.
Simultaneously with the calling party, “beeping” sounds will appear in the called subscriber’s phone, informing about a new incoming call.
Depending on the importance of the first and second calls, the called party will have several options for conducting a conversation:
- You can ignore the appearance of the second call, calmly continuing the current conversation;
- To answer the persistent signals of the second caller and send the first one to the “standby” mode, you should press the “2” key and the green call key in turn;
- Alternately pressing the number “1” and the same green key will allow you to answer the second subscriber, and completely stop the conversation with the first;
- If the second incoming call is not interesting to you, you can simply drop it. To do this, after pressing the number “0” you will have to press the same green key.
By the way, these manipulations can be successfully performed without pressing number keys. The functionality of all mobile phones implements this process quite easily.
Important: Both smartphones and all phones support “second line” functions. But the third caller will not be able to reach the interlocutor. In any case, he will only be able to hear busy tones.
Using the second line function provides additional options both when receiving calls and when making them. Without interrupting the conversation, you can dial the necessary numbers on the keyboard and make a call. In this case, the current call will be put on hold, and you will be able to reach the second subscriber.
The pricing of the described service will be influenced by the directions of the calls made. There will be no charge for incoming calls, and outgoing calls will be charged at current rates. When the subscriber is in a roaming zone, the cost of calls will be determined by the current roaming network.
Whatever tariff the subscriber uses, he does not have to worry about how to enable a second line on MTS. The service will be available to absolutely everyone. Its activation is carried out using a USSD request in the format *43#. Using the same combination, you can check the status of the service.
Setting up a Second Line in the MTS network using the telephone menu
Even the oldest phone models are capable of connecting another line. To do this, you just need to “go” to the call settings. To begin with, it is advisable to check the status of the service, and only then start using it.
MTS will be able to offer another useful service that allows you to find out about those calls that were made while the phone was turned off (inaccessible). We are talking about the “You got a call” option.
How to disable MTS Second Line?
Finding out how to disable the second line on MTS is also not difficult. This deactivation is performed using the already specified USSD code in the format *43# or using the telephone menu.
Important: For those subscribers who “joined” the MTS network after March 13, 2009, the service will be connected by default. Users whose subscription period began earlier than the specified date must activate the second line independently.
Android is full of useful bells and whistles and they are constantly being replenished with new ones, making it possible to use our gadgets more efficiently.
If you want to receive notifications during a call, you will need to activate the "call waiting" option
This setting is available in phones regardless of the operating system version, for example, Android 5.1 or 6.0.1 and user interface.
You will hear some beeps in the speaker, you can switch to another call and talk to someone else.
This way, you will be able to keep the original call open and answer the new one without closing either of the two.
If you answer another call while on a call, the first party will hear a voice message or song, depending on your network operator.
How to enable call waiting on your Android phone
By the way, there is another great way to almost instantly enable call waiting on your Android phone. I recommend.Log into the telephony app and then turn them on. To do this, click “Options” at the top left and go to settings.
Now go to the “Advanced” tab.
Here, in the “Call Waiting” section, move the slider to the right position.
This means that you will receive notifications about other incoming calls while you are on a call.
That's not all. Let's go back and go to another tab - “Signals when calling.
Here, opposite the line “Notification. During a call...”, also move the slider to the right.
Important points in setting up call waiting on Android
Please note that the names may differ slightly from mine, depending on the android version and user interface.
In this case, I used a Samsung Galaxy phone with Android 6. Also, make sure that the call on hold option is active.
This feature has no other settings and can be turned on or off.
There are other settings in the telephony menu that you can play with, but with caution.
We are talking about call forwarding - be careful not to make a mistake. There you have the choice of when and which number will be forwarded to another.
You can also turn on call blocking, show or hide your phone number, and other options. All these settings are available in the Phone application menu. Good luck.
We've all had such cases when, while talking on the phone with another subscriber, someone tries to call us. Not all cellular users know what to do in such a situation. However, you can solve this problem quite simply by connecting the “Second Line” service to your phone.
This service is available to all mobile phone users. In order for you to use the service, you just need to connect it. After connecting the service, you will be able to switch from one call to another. However, not all Megafon subscribers know about this service, so they continue to use the same line. What not to eat is convenient.
How to activate the Second Line service
Please note that the “Second Line” service is included in the initial “Call Waiting” service and does not require independent connection, since it is already connected to your SIM card. However, if, for some reason, the service is disabled, you can activate it using a simple code - *43#, which must be entered on the keyboard of your mobile device and press “Call”. This service will be very useful, helping you manage incoming calls in a way that is convenient for you. If a call comes to your cell phone number, and at that moment you are already talking on the phone, then thanks to the “second line” service you will be able to answer the incoming call without disconnecting from the first interlocutor.
There is no mandatory subscription fee, so the service is provided free of charge and is already included in the initial set of services on your smartphone.
How to manage the Second Line service
If you have set up the “Second Line” service and you receive an incoming call during a conversation with another subscriber, you can:
- Answer an incoming call by pressing 2 on the keyboard of your mobile device, then the “Call” key.
- Disconnect an incoming call by pressing the number 0 on the keyboard, then pressing the “Call” key.
If you want to return to the conversation with the first interlocutor, press the number – 2 on the keyboard of your mobile device. If you want to disconnect from any conversation, press – 1.
It is easier to manage the service through the smartphone itself. On older mobile phones, dual call control is also provided. Managing incoming calls does not require any special skills. Your mobile device, using prompts on the phone screen, will tell you how to manage incoming calls. This method of managing the service is much more practical. Since, by managing calls using numbers, you can accidentally disconnect from two calls at the same time.
When you use the “Second Line” service, the “Call Hold” service is automatically activated. In this case, this service allows you to hold a conversation with your interlocutor while you answer the second incoming call. This service is also free and included in the basic set of services.
Please note that the initial set of services includes a special “Conference Call” service. This service allows you to organize a collective conversation so that you can discuss a particular issue as a group.
How to set up the Second Line service
You can set up the “Second Line” service through the menu of your cell phone. To do this, go to the settings of your cellular device. Find the Call Settings folder. Find the “Second Line” item and check the service connection. If the service is disabled, reconnect it.
How to disable the Second Line service
If you need to disable the “Second Line” function, you can also do this in your phone’s settings. Or by typing the code *43# on the keyboard of your device.
Each MTS subscriber has access to the “Call Waiting and Hold” service, the activation of which allows you not to miss a single important call. That is, you will be able to receive a call even when you are already talking with another subscriber. In most cases, the service does not require connection and is activated automatically on all tariffs. However, in some cases, you need to connect the service yourself, and few people know how to connect a second line to MTS.
As part of this review, we will tell you what the “Call Waiting and Holding” service is and how you can activate it. We will also look at the characteristic features of the service that the operator does not pay due attention to, but they can play an important role for the subscriber.
Connecting a second line to MTS
The Call Waiting and Hold service allows you to accept an incoming call even if you are already talking to another subscriber. During a conversation and a simultaneous call, you will hear a signal, which means that another subscriber is calling you. You will be able to answer an incoming call or call another person while holding the current conversation. When you hear the second incoming call signal, you can perform several different actions.
If you receive an incoming call during a conversation, you can:
- Ignore the beep and continue communicating;
- Refuse an incoming call by pressing the number 0;
- Interrupt the conversation and accept the incoming call by pressing number 1;
- Leave the first caller on hold and accept an incoming call by pressing the number 2 or the accept call button;
- N - hold all active calls and make a new call to phone number N.
It should be noted that many modern phones support the “Call Waiting” function, thanks to which switching between connections with different subscribers occurs in a simpler way.
Before connecting a second line to MTS, you should make sure that the service has not been activated previously. You can check the service status using the command *#43#. If you entered into an agreement with MTS later than March 13, 2009, then the “Call Waiting and Holding” service should be activated automatically. The second line can only be missing if you previously disabled it yourself. If the MTS SIM card was purchased before March 13, 2009, then in order to to connect a second line to MTS, dial *43# on your phone. You can also connect to the service through or in the application. If there is a need to disable the service, use command #43#.
How much does the second line cost?
We have all long been accustomed to the fact that almost every useful service costs money. This is especially true when it comes to the services of cellular operators. We found out how to connect a second line to MTS, but how much will you have to pay for it? Oddly enough, but The “Call Waiting and Hold” service is completely free. There is no service connection fee or subscription fee. However, if the call is put on hold, you will have to pay for two calls at the same time. Tariffing is carried out in accordance with the terms of your tariff plan.
The service supports one held and one active call. It is not possible to answer the third incoming call; to do this, you must end one of the previous ones.
In conclusion, it should be said that the second line allows you not only to receive a second incoming call, but also to make outgoing calls. You can call another while you are talking to the current subscriber, and the current call will be put on hold.
In order not to miss an important call from a business partner while you are planning a trip to the country with your relatives, it is recommended connect to the “second line” service, or as it is officially called – “Call Waiting”. With its help, you can simultaneously receive two incoming calls. You can switch one by one from one conversation to another using the prompts displayed on the phone screen.
Managing the “Call Waiting” service
Connecting/disconnecting the second line is free. This can be done in several ways:
IVR service. We call number ##914. After that, listening to the answering machine prompts, dial 1#15# to turn it on, and 2#35# to turn it off.
SMS service. Send an SMS with the text “On” or “OFF” to number 1029.
USSD service. To enable, dial *114*15#call. To turn off – *114*35# and press the dial key.
FOX. In Motiv’s personal account, go to the section with additional services, mark the required service for activation, or remove the mark if the need for it is no longer needed.
The only point worth remembering is that the “second line” is only available if you have a positive balance in your account. It is impossible to use it as a loan.
