Fragment of Instructions
The headset supports a simple connection feature that allows you to connect devices without entering the PIN code. This feature is available only if the devices support Bluetooth version 2.1 or higher. You can also use the active connection feature to connect devices (see page 14). Installing a headset connection with two phones using the MultiPoint function headset can be simultaneously connected to two telephones equipped with Bluetooth interface. 1 Install the connection with the first Bluetooth phone. 2 Click the answer answer button and hold it within 3 seconds to go to connection mode. 3 Turn on the MultiPoint function by pressing and holding the volume button. 4 Turn on the Bluetooth interface on the second phone and search for a headset (information on how to do this can be found in the phone's user manual). 5 In the list of devices detected by the second telephone, select the headset (HM1200). 6 When requesting, enter the PIN of the Bluetooth function (0000, four zero) to establish a connection between the headset and the phone. 7 Reconnect the connection between the first phone and headset. Some phone models do not support the compound with the headset as the second device. Enabling Multipoint Function In Connection Mode Press and hold the volume button. The light indicator blinks twice with blue, and the beep sounds. Turn off the MultiPoint function In connection mode, press and hold the volume button. The light indicator blinks twice in red, and the beep sounds. Disconnecting the headset from the device Turn off the headset or use the Bluetooth menu on the phone to remove the device from the list of connected devices. English 13 Reconnection of the headset with the device If the connection between the headset and the phone to which it is connected, it has broken, follow these steps. Click the call answer button on the headset or use the Bluetooth menu on the phone. Each time the headset is turned on, an attempt will be automatically allowed to restore the connection to the device. This feature may not be supported by some phones. If the MultiPoint function is enabled, the headset attempted to connect with the last two devices. Using Active Connection Function If the active connection feature is enabled, the headset automatically searches the device with the Bluetooth interface and tries to establish a connection to it. This feature works only with mobile phones, and the phone visibility function should be enabled. 1 In the connection mode, press and hold the call response button to switch to active connection mode. Information on how to switch to connection mode can be found on page 11. 14 The purple indicator lights up, and the headset will search for a phone with the Bluetooth interface in the signal zone and attempt to connect to it. Make sure the phone you want to establish a connection is located next to the headset. The headset and the phone should be placed next to avoid accidental connection to other devices. Attempts to actively connect will be performed within 20 seconds. Phone with the Bluetooth interface with which you want to install the connection must not be connected to other devices. If the phone is already connected to another device, complete this connection and restart the active connection feature. Some devices do not support this feature. Call functions Availability of a call function depends on the phone model. English 15 Making a call Repeated a set of the last number for dialing the last call number from the main phone. Perform the following action. Press the call response button. To set the last call number from the second phone, follow the following action. Double-click the call response button. In some models of phones, when you press this button, the call log opens. Click the answer answer button again to dial the selected number. Voice dialing Press and hold the answer button to call, and then say the subscriber's name. This feature is available only on the main phone when using the speakerphone profile. Some devices do not support this feature. The answer to the call when you receive a call, click the call response button. When you receive a call on both phones with which the connection is set, you can only answer the call received on the main phone. Completion of the call To complete the call, click the call response button. Call deviation To reject the incoming call, press and hold the call response button. When you receive a call on both phones with which the connection is established, you can deflect only the call received on the main phone. This feature is available only when using a speaker profile. Opportunities available ...
Contents of delivery:
- Headset
- Charger
- Charging case
- User's manual
- Additional headset nozzles (included delivery for some countries)
The Bluetooth headset Samsung WEP 200 is an image product, its main difference from competitors, which immediately rushes into the eyes, is a miniature size. In general, this is not the first small headset, it suffices to remember such devices from BlueSpoon, but it has a number of features relating to not only its own, but also the delivery kit.
Design and design
The design of the headset is definitely curious. At least the fact that so small headsets are still new on the market, now they are image, rather expensive solutions, but soon, perhaps, such a size for a Bluetooth headset will become unless standard, then the usual thing. Otherwise, the design of the device can be described by the phrase "catch not for what". The case has a form of a slightly "continuous" bar, the contacts are visible on the back side, by the way, with frequent wearing it may be necessary to clean. The black color is definitely winning, especially in our market, the coating lacquered, reliable, hardly the paint will begin to pursle during operation. He was not chosen by chance, upon closer examination, associations with many Samsung phones immediately appear, although, in principle, the design headset is perfectly combined with any black telephone (take at least the same Sony Ericsson W900, Nokia N80).
The design of the headset was also like men, women, the focus group was small - four men and three women. All noted the miniature size, a good color (except for one girl, which did not like the color), responded positively about the case for transportation (it goes below). And, no matter how surprisingly, everyone after an external inspection arose about the convenience of wearing and as a sound. Before we talk about it in more detail, I will express the question asked by a girl who did not like the color: "Will the WEP200 be released in white color?" Therefore, this device is perfect for both sexes, but the second, less brutal, color is necessary to attract the attention of women. For example, it can be white. Well, and another noticed item, while one of the girls Merila headset - WEP200 becomes absolutely imperceptible under long hair. As it affects the quality of the transmission of speech - it remains incomprehensible, it is quite possible that in no way.
As for the convenience of wearing, before buying, be sure to try this headset. As you see in the photos, the mount here is implemented quite unusual - there is no hack, the earphone is simply inserted into the auditory channel, the fixation is made due to a small rubber seal. Alas, the headset simply did not come up - it's worth tilting my head right or left, it's a little shone, and the device turns out to be on the floor. I am not a member of the headset alone, in other people (I really want to call them experimental), there were no special problems, but it was not clear to the end, whether "ease of wearing", which they said, Damano due to attractive design ( In things that like, there are no shortcomings, isn't it?) or WEP200 is really not difficult and does not cause discomfort?
The headset is very light, you feel on the ear just because you know about her (well, and also, of course, you feel the seal in the auditory canal).
The package for some countries includes additional headset nozzles, alas, in a set with a test sample they were not, possibly, when used with another nozzle, the result in the root would be different (at least for me). It will be interesting to try to displacing the headset Sony Ericsson HBH IV 835, there is a familiar wired headset HPM-70 earphone, in theory, it should be more convenient to solve in WEP200.
The device assembly is good, gaps, the backlash, the symptops are missing.
Control
The device control is quite standard - there is a multifunction button on the front panel, input to the pairing mode, a set of the last dialed number, etc.), on one of the ends of the headset (just hard to say, the top one or the bottom, right or Left) - key-rocker volume adjustment. In general, the keys are pressed quite easily, intelligible, but the owners of large hands will have to be accompanied for some time - miniaturization has a reverse side. I would not call my fingers so big, however, and I had to get used to how to control the volume of the challenge. It is impossible to call this fact a problem, rather, it must be considered when buying. One more thing: at first it is not always possible to correctly calculate the power of pressing the multifunction button when answering an incoming call - the headset is pressed into the ear, pain may occur (although, of course, it is highly dependent on the size of the hearing channel).
And last, as for the control, - in order to enter the device into the pairing mode, it will take a fairly long time of pressing the multifunction key, so do not be surprised. Be sure to ask the seller to demonstrate this focus.
Food
In theory, it would be necessary to start from the type and capacity of the battery used, but the stained of this master will be different. The fact is that the Samsung kit includes a small case, remotely resembling a toy chest (there is no fairy tales inside). In order to charge the device, it is necessary to put the headset on the contacts in this case, close the lid, then connect the charger to it. By the way, it has its own format, it is not "beaten" miniusb. When the headset is on charging, the case is highlighted in red from the inside. As you understand, during charging, it is impossible to use the headset.
What can I say? On the one hand, the manufacturer's attempt is visible to the Nokia BH300 (the sizes almost the same) "on the body" there is a charger connector, new "thin" memory is used. SAMSUNG engineers decided to go their own way. Purely subjectively, the decision is curious, it is not adequately appreciated until then until you turn on logical thinking. Well, the logic suggests that the same BH300, while it is charging, you can not disconnect from the phone - when you receive a call, it is enough to disconnect the memory, hang a headset on your ear and start a conversation. The same, in principle, can be done with the WEP200, that's just time the extraction process from the box will increase the magnitude more, and purely psychologically I do not want to touch the headset while it is in the case. On the other hand, the time of complete charging of the headset is not so big if you put it on charge in the evening, then exactly no problem with the case will experience. In addition, the additional functionality of the magic box is to use as a case for transportation - makes it even more attractive. And also, guess who will especially like this thing (mean gender signs)? Who will just flash from the process of opening and closing the charter, his demonstrations surrounding?
The headset uses the Li Ion-POL battery with a capacity of 70 mAh, the WEP200 conversation mode can work 4 hours, in standby mode - 100 hours, charging time - about two hours.
Immediately, probably, you need to say about what. The headset is one of the few that use Bluetooth 2.0 profile. It's great, the seller can tell you about it, but what does it give? Apparently, the main result of using this profile is reduced energy consumption, we will talk more about this in another material.
Communication with phone, sound quality
The headset was tested with two phones, it is Nokia N80, Sony Ericsson W900. As mentioned above, to enter the device to the conjugation mode, you need to keep the multifunction key for a long time, it is not very convenient. The rest of the conjugation problems did not have any, however, not only with the conjugation, but in general, with operation, the voice set works adequately, as well as switching between lines, performing the reception and postback.
The sound quality can be described as the average, removing from the phone more than three or four meters, you hear noises, crackle, in normal mode (one meter or less) they are missing, but the interlocutors complained that the voice is heard from the barrel, asked to repeat Slared louder. You hear the interlocutor well, there are no problems with it, the volume level is sufficient.
The headset is not equipped with a DSP processor, what will mean this fact for the user - no need to explain: it is best to talk in a quiet room, otherwise, if you are, for example, in a supermarket, your interlocutor enjoys a wonderful addition to your conversation - the voices of people around , speakers on the speakerphone, etc.
findings
Samsung WEP200 is an image headset with many "but". Beautiful, but the quality of transmission of speech is noticeably lame. Included with the headset there is a beautiful chain, but is it not easier to charge the headset in the usual way? Fastening method is unusual, but is it convenient? The headset has a small size and weight, but is it adding a convenience?
As for competitors. The average price of WEP200 in retail is about 100 dollars, at first it seems that it can be compared with other miniature "luxury" headsets - Jabra JX-10, Nokia BH-800. But this is not so, to understand it is enough to look at the Nokia BH-300 model (the average price is about 65 dollars) - almost WEP200 and BH-300 are similar as a brother with a sister (in this order). The main differences of the 300th model - you can change the rims, several pieces of different colors are included, charging is carried out in the usual way, the design of the device is more "female". Most characteristics of these devices coincide. Apparently, and the WEP200, and the BH 300 are made on the basis of a single headset, "ancestry" (most likely, from Jabra), we still have to return to some devices.
Based on this, additional $ 35 when buying a WEP200 (take the BH-300 "Basic" price, very large, I must say) the consumer will pay for the case and black color "included". The language does not turn to call it a successful purchase - for $ 100 you can buy a more functional and even more image product (for example, Jabra JX-10). And, nevertheless, WEP200 will find its buyer, it is possible that in most women will find sellers can immediately demonstrate a charging case, talk about the ease and imperceptibility of the device (the case at this time can be opened and close, hide and pull out His headset).
Specifications:
- Bluetooth Profile: 2.0
- Standby time: 100 hours
- Talk time: 4 hours
- Weight: 9 grams
Instruction K.Bluetooth Garnities
Charging:
The headset has a built-in lithium battery; Charge the battery to a complete charge before use.
2. Connect the charger to the headset, through the charging port.
3. In the process of charging, the LED indicator will work, after complete battery charging, the indicator will go out.
Note:
1. Complete charge takes about 90-10 minutes.
2. With the first charging, charge the device at least 4 hours.
3. The first 3 charging spend, only after complete discharge until the headset is complete.
4. The device will be charged at temperatures from -10 to +45 degrees Celsius.
Turning on / off:
1. Hold down the "On" key by clicking about 3 seconds, until the indicator is turned on, the device will be turned on.
2. To disable the device, hold down the "On" key by clicking about 3 seconds; After the indicator flashes 3 times, the device will be disabled.
Creating a mobile phone connection:
1. Before you start creating a connection, make sure that the headset is disabled.
2. Turn on the Bluetooth function on the phone.
3. Hold the "On" key by clicking about 5 seconds; The indicator will flash red and blue alternately (for the headset "Jabra" and "Motorola" the indicator will burn constantly), which means that the device is in connection mode.
3. Search for new Bluetooth devices on the phone.
4. In the mobile phone device window, you will find the inscription "Sanyo BL812", "Jabra" or "Motorola".
5. Select the "Sanyo BL812", "Jabra" or "Motorola" string and create a connection.
6. Enter PIN connection code 1234 for "Sanyo. BL.812 "or 0000 for "Jabra"And" Motorola ",click the "YES" button, the indicator will stop being blinking red and blue alternately, and starts flashing blue (for the "Jabra" and "Motorola" headset - the indicator will stop constantly burning in blue, and starts flashing blue). This means that the connection has passed successfully.
7. After connecting the headset with the phone, be sure to restart the headset (turn off and turn on after 10 seconds).
8. Now the headset will be in ready mode, you can call and receive calls.
Note:
1. If the connection is not created within 90 seconds, the headset will automatically switch to the readiness mode. At the same time, you can not use the headset. Repeat the compound 1-6 operations.
2. When creating a connection; The recommended distance between devices is less than 1 m. In this case, there should be no metallic obstacles between the instruments. This headset has a PIN code "1234" or "0000". Different mobile phones have different ways to customize, refer to your phone model manual.
3. If the connection is created, it will be saved even under the following circumstances:
1) The device will be disabled
2) one of the devices stopped working
3) One of the devices will be rebooted
How to receive calls:
1. When a call came to you, press the "Conversation" key, after you hear the call.
How to end the conversation:
1. After the conversation is completed, press the "Conversation" key to complete the conversation.
2. You can also wait until your interlocutor turn off, then you will turn off automatically.
Restore the last bell:
1. If your phone has the "Restore Call" function, you can use it with the headset.
2. The function is activated by double pressing the "Conversation" key.
Volume control:
1. To increase the volume, press the "Volume +" key.
2. To reduce the volume, press the "Volume-" key.
Manufacturer Microchnikov Nano Phones.
Representative of Nano Phones in Nizhny Novgorod.
If your device fails to configure to work with the headset in the standard way, contact Plantronics Technical Support.
Professional solutions for the modern contact center
Plantronics understands that your main concern is high-quality customer service. Professional communication solutions are able to help turn customer service centers employees in real superheroes. Modern contact centers have passed the way from simple call centers to customer service centers, where relationships are built on the strict rules and the company's reputation is subject to verification each time.
UNIFIED Communications - Unified Communications for Modern Business
The Unified Communications concept allows you to establish a connection with one touch. This greatly facilitates voice and video calls, so you will have to worry only what to say, but not what device to use for this. Free interaction with the UC (Unified Communications) solutions of Plantronics provides a legitimate speech, conversations without noise and connecting to any device.
Sound systems for creating an effective work environment
Sound systems are a new step on the way to create an effective and comfortable work environment. Today, the most common type of office is "Open-Office" when there are no partitions in the office, and employees can move freely and communicate with each other. This positively affects the setting in the team and the exchange of information, and at the same time creates additional distracting factors, the main of which is speech colleagues. It is very difficult to concentrate at work when you are surrounded by a different kind of conversations, and which you have to be distracted, not wanting. By the solution of this problem, the use of Sound Systems from Cambridge Sound Management.
