In Windows 7, the search service does a pretty good job. Thanks to the indexing of computer files, the search for the necessary information occurs almost instantly. But, unfortunately, bad things happen. It happens that the search refuses to work, and gives an error, for example, this one: Cannot find "search:query=info". Check if the name is correct and try again .
I think that you should not puzzle over the causes of such an error. It will be much more efficient to go directly to fixing the problem. I will give several ways to restore search functionality in order of their effectiveness.
1. The first step is to check if the service is running. To do this, press Start, right click on the item A computer and select from the context menu Control.
In the window that appears, on the left, we need to select Services. In the list that opens, we find, check the status - if the service is turned off, then you need to turn it on.
To do this, in the properties of the service, click Run, Launch type put - Automatically.
2. The second way is to perform a clean boot of Windows. Its essence is that services and programs that are not related to the operation of the operating system are disabled. Windows boots "bare" like the first time you start it. I wrote about how to perform a clean boot. If the search works with a clean boot, then the problem is in the installed programs.
3. Check the search options in folders. For this we go to Control Panel and looking for Folders settings, then click on the link of the same name.
In the window, go to the tab Search and then press Restore Defaults, and then OK.
4. Check indexing settings. AT Control panels searching and discovering.
There we press the button Change.
Check that all items are checked. Click OK.
Now go back to the window and press the button Additionally. Approximately in the middle of the window that appears, there will be a button Rebuild- we press it.
5. If there is a restore point, then you can try to restore the system from the specified point. The problem is that not everyone customizes . But if it does exist, then this method may be the most effective.
6. Try to create a new user. It is possible that the existing profile has become corrupted, and some system files have been deleted - anything can happen. If the search works under the new user, then it is now undesirable to use the old profile.
I told you everything I remembered. If you know any other ways to “treat” the search, then share them in the comments - perhaps your answer will be useful :).
Also read on this topic:
Searching for a file in Windows by its contents through the XYplorer program
Windows Media Player does not work. What to do?
How to create a restore point in Windows 7?
Automatic logon to Windows 7. Setting up autologon
How to increase the swap file in Windows 7
Sometimes it happens that the search in windows 10 refuses to work or does not work correctly. If anyone has Cortana, then it may also not work together with the search or work in an incomprehensible way. Obviously, the search in windows 10 is very necessary for comfortable work, because with the help of it we find a lot of settings, of which there are a lot in windows 10, files, folders. We will analyze many ways, or rather step-by-step points, when Windows 10 search does not work.
Windows 10 search not working
Step 1: Restart your computer
Sometimes it can be very simple to solve this problem by restarting the computer, or rather the system as a whole. If the problem remains after restarting the computer, then read below and follow the steps in order until the problem is fixed.
Step 2: Delete the old indexed database
To solve these problems, we must open the indexing options of Windows 10 and delete the old search database.
- Open a command prompt and issue the command control /name Microsoft.IndexingOptions to open indexing options.
- In the window that appears, click on " Additionally", then in a new window click on the button" Rebuild". In this way, Windows 10 will delete the current indexed database and generate a new one. To be sure, restart your PC.
Step 3End the Cortana Process
This item is not useful to many, but I know many users who specifically install English-language windows 10 and use Cortana. Remember, there is no cortana in Russian versions of Windows, in order to reduce your time, proceed to the next step. And we will continue if anyone has this function-cortana. Just end the cortana process in the task manager.
- Open Task Manager Ctrl+Alt+Del.
- Find the name Cortana.
- Right-click on the process and select End task from the menu.
Step 4. Windows 10 search not working? Restart File Explorer
Sometimes it can be very useful to restart windows explorer, especially when, for example, shortcuts from the desktop have disappeared. In this case, restarting the explorer will help us start using the working search.
- Open Task Manager Ctrl+Shift+Esc.
- Find Conductor in the list and click restart.
Step 5: Use the Windows Troubleshooter to Repair Indexing Services
Windows 10 has troubleshooting features for all known issues. We will use this option.
- open Control Panel.
- Type control panel in the search bar Elimination.
- Choose from what is offered Troubleshooting Windows Search Service Issues.
- Click below line Additionally to run with admin rights.
- Click on Run as administrator.
- Select the problem you're having with search in windows 10, usually it's Files not showing up in search results.
Step 6. Set the startup options for the windows search service and restart it
Sometimes the system forgets to load the necessary services at startup, this is due to the large number of startup processes. Check and restart the search service in windows 10.
- Press button combination Windows+R and enter in the line services.msc
- Find a Service Windows Search and right click on it and select Properties.
- Select a startup type. Automatic (delayed start) or auto. Depending on preference and press apply.
- Navigate back to services, find windows search.
- Right click on it and Restart.
Step 7Resize the paging file
Oddly enough, but one user under the nickname GTR24V increased the paging file on the system drive, which led to the correct operation of the "search" in Windows 10. It is obvious that, according to recommendations on the Internet, many sites say that if more than 8 GB of RAM, then you need to disable the paging file. This is not at all the case, the swap file is needed in any case, even if it is minimal, see .
- Press the win + R key combination and write in the line sysdm.cpl
- Go to tab Additionally and press options.
- In the window that appears, click the tab Additionally and Change.
- Untick Automatically select put a point Specify size and specify any size for checking. Minimum 16 MB.
Step 8Disable Keystroke Encryption in Zemana AntiLogger Free
Also an interesting situation with the Zemana AntiLogger Free encryption protection program. If the function to encrypt button presses is enabled, then search in windows 10 may not work. If there are similar programs, then look at the settings, and I will analyze an example with Zemana AntiLogger.
- Open the program and disable item with encryption buttons.
With the introduction of the new Windows 10 operating system, there are many interesting changes. One of them is the search bar, which is available on the taskbar. If you have problems with its functionality, or the search does not work at all in Windows 10, check out our tips.
The search bar in Windows 10 is available not only in the form of a line for typing on the taskbar, but also as a feature in the Start menu. With its help, we can quickly find the program we are interested in, the game, and so on. Unfortunately, like many other features and solutions in Windows 10, there are also errors when working with search.
Similar problems occur with the Start menu not working in some editions of Windows 10. Sometimes, users simply cannot start it, or it freezes while working and a fatal error message appears. However, there is a simple solution to fix the problem. But first, let's understand why the search bar is not working and what is the source of this problem.
If these problems appear in Windows 10 - for example, we cannot access the search bar, the search does not work, or suddenly stops working for unknown reasons - you can try to solve this problem yourself.
Of course, the easiest way is to restart the computer and see if the error occurs. If yes, we will try to fix it through the search service. To use this tool, press the Win + R keyboard shortcut, then type the command services.msc and press Enter.
After the window opens, find the Windows Search item in the list of available services. You need to check what value is displayed in the "Status" column. If the service is running it should be "Running". If not, right-click on Windows Search and select "Properties" from the drop-down list. Then, in the window that opens, select Startup type: Auto, and in the Status item, click the Start button. After making these changes, the search bar should work without problems. You can also restart your computer after making changes.
Windows 10 start menu button not working
What to do if the search through the Start menu does not work? Or even worse, if the Start menu button doesn't respond at all? However, there is a simple solution. This solution is especially useful to you if a message appears in Windows 10: “Critical error. The start menu and the Cortana app are not working. We will try to fix this issue the next time you sign in." If you have problems entering the Start menu, you will need to use the command line. Run it in administrator mode and enter the following command:
sfc /scannow
The system will start scanning for errors, after which the problem should be fixed. However, if the solution doesn't work and you still get the above error, do the following. Go to section:
"Settings - System - Tablet Mode"
and set the switch "Enable tablet mode".
Then open:
Settings - Personalization - Start
and turn on the item "Open the home screen in full screen mode".
In most cases, after enabling these features, the search and the Start menu button will work.
If this method does not work, we will reboot (restart) the Start menu button. To do this, open the PowerShell application with administrator rights and enter the following command:
Get-AppXPackage -AllUsers | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”)
The last method does a restart to the initial settings. If you still have problems with the search or the Start menu button, write about it in the comments.
How to disable search on the taskbar
If the search engine built into the taskbar bothers you, then you can instantly turn it off in a few clicks. Let's see how to remove it in Windows 10.
To get started, right-click next to the search bar on the Windows 10 taskbar. From the drop-down menu, select the "Search" option, and check the box for "Disabled".
The search bar will immediately disappear from the taskbar. All these changes take effect instantly and can be marked in the same way. To return it, simply select the "Show search field" item.
In Windows 10, another option for displaying the search bar is available - that is, instead of the input field, you can install the Magnifier icon, when clicked, a search box will appear. To do this, set the "Show search icon" to the middle value.
In windows 7, the search service does its job pretty well. Thanks to the indexing of computer files, the search for the necessary information occurs almost instantly. But, unfortunately, bad things happen. It happens that the search refuses to work, and gives an error, for example, this one: Cannot find "search:query=information". Check if the name is correct and try again.
I think that you should not puzzle over the causes of such an error. It will be much more efficient to go directly to fixing the problem. I will give several ways to restore search functionality in order of their effectiveness.
1. First of all, you need to check if the windows Search service is running. To do this, click Start, right-click on Computer and select Manage from the context menu.
In the window that appears, on the left, we need to select Services. In the list that opens, we find windows Search, check the status - if the service is turned off, then you need to turn it on.
To do this, in the properties of the service, click Start, set the Startup type to Automatic.
2. The second way is to perform a clean boot of windows. Its essence is that services and programs that are not related to the operation of the operating system are disabled. windows boots "bare" like the first time you start it. I wrote about how to perform a clean boot in this article. If the search works with a clean boot, then the problem is in the installed programs.
3. Check the search options in folders. To do this, go to the Control Panel and look for Folder Options, then click on the link of the same name.
In the window, go to the Search tab, and then click Restore Defaults, and then OK.
4. Check indexing settings. In the Control Panel, search for and open Indexing Options.
There, click the Edit button.
Check that all items are checked. We press OK.
Now go back to the Indexing Options window and click the Advanced button. Approximately in the middle of the window that appears, there will be a Rebuild button - click it.
5. If there is a restore point, then you can try to restore the system from the specified point. The problem is that not everyone sets up the creation of a restore point. But if it does exist, then this method may be the most effective.
6. Try to create a new user. It is possible that the existing profile has become corrupted, and some system files have been deleted - anything can happen. If the search works under the new user, then it is now undesirable to use the old profile.
I told you everything I remembered. If you know of any other ways to "treat" the search, then share them in the comments - perhaps your answer will be useful :).
Tags: windows 7, search
myfirstcomp.ru
Search not working in windows 7
In Windows 7, system search is implemented at a very good level and performs its function perfectly. Due to the competent indexing of folders and files on your PC, the search for the necessary data is performed in a split second. However, errors may occur in the operation of this service.
Fixing search errors
In case of malfunctions, the user sees an error of this kind:
"Unable to find 'search:query=search query'. Please check if the name is correct and try again"
Consider ways to solve this problem.
Method 1: Checking the service
First of all, you need to check whether the "windows search" service is enabled.
Method 2: Folder Options
The error may occur due to incorrect folder search options.
Method 3: Indexing Options
To search for files and folders as quickly as possible, Windows 7 uses an index. Changing the settings of this parameter may result in search errors.
Method 4: Taskbar Properties
Method 5: Clean Boot the System
This method is suitable for an experienced user. Windows 7 starts with the necessary drivers and a small number of programs that are automatically loaded.
After performing these steps, we perform the points that were described in the methods described above.
To restore the system to normal boot, perform the following steps:
Method 6: New account
There is such a possibility that your current profile is "corrupted". It deleted any important files for the system. Create a new profile and try using the search.
Lesson: Creating a new user on windows 7
We are glad we were able to help you resolve the issue.
Poll: Did this article help you?
Not reallylumpics.ru
Search does not work in windows XP, 7, 8, 10 - troubleshooting
The Windows 10 version of the system has many additional features, including a convenient search bar located on the taskbar. A useful option, which many users got used to very quickly - with its help, you can very quickly find the desired file directly in the search engine on the taskbar. However, some may have problems with its work, or it may refuse to work at all for some reason.
Most often, this can happen after the next system update, or after installing the "Tens" using the author's assembly.
You can, of course, try to restore the system using a restore point and this method will be the most effective, but not everyone creates these points, therefore, before using such a radical method, we recommend trying the methods for solving the problem, discussed below. We will also touch on the version of windows 7, where similar problems are also possible.
Restart search service in windows 7
If you have a Seven, the solution to the problem may be to restart the service responsible for searching the system.
We go along the path Start / Control Panel / Administrative Tools / Services. Here in the list we find windows Search - click Properties.
If the service is disabled, click Start. The startup type must be set to Automatic. If the service is running, try stopping and starting again. 
After starting, we check the operation of the search function.
Rebuilding indexes in Windows 7, 10
An effective method of fixing such a failure for windows 7 and 10 versions can be rebuilding indexes. The same recommendation for fixing this bug is given by Microsoft. To do this, in the control panel, find the Indexing Options item.
In the Options window, open Advanced. 
Click Rebuild in the Troubleshooting section, and then confirm this action. 
Alternatively, in the indexing options window, click the Troubleshoot search and indexing link. 
Uninstall Microsoft Edge browser
The troubleshooting procedure will begin. 
Upon completion, you will be prompted to select options for the problems noticed. Select the first two among them by ticking and click Next. 
After diagnosing and fixing, if successful, you will receive an appropriate message about the successful completion of the automatic error correction. Restart your computer - the problem should be fixed.
Using registry editor on windows 10
You can try to solve the problem by editing the registry keys (parameters). We launch the system registry editor, for example, by entering the word regedit in the Run window, called by the Win + R key combination.
Using the explorer (represented in the form of a tree structure similar to the standard system explorer), we are looking for the windows Search branch located on the path: HKEY_LOCAL_MACHINE \SOFTWARE \Microsoft 
In the working window on the right, a parameter called SetupCompletedSuccesfuly is of interest, it should be set to 1. 
Next, in the explorer, open the windows Search directory and find the key named FileChangeClientConfigs. 
Change the name of this folder to FileChangeClientConfigsBak and save the changes. 
We restart the computer, the probability of a positive result is high. 
All actions with the system registry related to its adjustment should be carried out with extreme caution, since incorrectly configured parameters may disrupt the stability of the system.
composs.ru
Search in windows 7
Hello, friends! Before writing this article, I practically did not use the search in windows. Why, if everything is clear, what and where lies. It was enough to look at 2-3 places. It took about 5 minutes. Moreover, on the computer, as unnecessary, the search service was disabled, which gives great opportunities in windows 7. And the search service also automatically turns off indexing and finding any files quickly through the search was not possible at all. That is, out of ignorance, turned off this universal thing. But this is no longer the slow search in windows XP. It has evolved a lot in windows Vista and made a huge step forward in windows 7. Here we will look at the main search features in windows 7 so that we can find the information we need even more efficiently.
Search from the start menu
First you need to show the main search box. It is invoked using the Win + F or F3 keys on the desktop.
The window is not bright and there is almost nothing to tell here. The question immediately arises about the need for it in windows 7. Most likely it was left for those who have recently switched from previous versions of windows. To not get lost.
The most accessible and easily found search in windows 7 is from the main Start menu. (How to make a familiar Start button in windows 8 can be read here). It is enough to open the main menu and the cursor is immediately placed in the search field. You start typing part of the file name and the results already appear. Surprises the speed of issuing results and its further sorting. We'll talk about this later.
The results are presented as groups of files from different categories. In the figure, these are Programs, Control Panel, Documents, Video and Music. If you know what category your file can be in, go straight to it and look further. We'll explore this below as well.
From the Start menu, it is convenient to search for programs or control panel items. Now there is no need to go the long way Start > All Programs > Accessories to select the Calculator. It is enough to open Start, write "Ka" and the good old Calculator is already at hand.
By default, Start menu searches are performed from the index (see the next section). But this can be changed by editing the registry. Use the search from the start menu. We write regedit and select the first and only (in my case) item - regedit.exe
The Registry Editor opens. We need to go on the left side along the path
HKEY_CURRENT_USER\Software\Microsoft\windows\CurrentVersion\Explorer\Advanced
On the right side, select the Start_SearchFiles parameter
By default, it has a value of 2 - search in the index. You can set the value to 0 - do not search for files or 1 - search only among the files of the current profile.
Setting up indexing
Indexing is the process of creating files with the properties and parameters of other files. Files have a bunch of properties that can be viewed on the General or Summary tab. These are Size, creation date, modification date and so on. This data is included in the index.
Why is searching from the index fast? Because you don’t really need to sort through a bunch of files, you can go to one place on your computer (to the index) and find everything there.
The index can be configured in the Indexing Options. Open the Start menu and in the search we write "ind" and select Indexing Options
Alternatively, this element can be found by going to Control Panel > Selecting Icon Display > Indexing Options
By default, the user profile, main menu, and offline files, if any, are indexed. This window also shows how many items are indexed - 4223 and below you can see the indexing status - completed.
To add any folder to the index, click Edit. The window below will open. In the upper field, select the necessary folders with checkmarks and click OK
Then some time should pass for these folders to be indexed and a quick search will be carried out on them too.
A legitimate question appears. why not include the entire hard drive in the index so that the search is always fast? And a logical answer. Searching through an index is faster the fewer files you add to that index. When adding system folders, index files will take up a lot of space, and the benefits of this will be doubtful. Thus, we add only what is needed to the index.
The location of the index can be changed if you need to free up additional space on the system disk. (Additional space is also well freed with CCleaner) To do this, in the Indexing Options window, click on the Advanced button. On the Indexing Options tab, in the Index Location section, click Choose New and specify any folder on your hard drive. In the same window, you can create this folder
On the File Types tab, you can check the boxes to set the file types you need for indexing. The type is an extension. This is what is in the filename after the dot.
Here you can add a new file extension.
Troubleshooting indexing issues
If you open the Indexing Options and see the picture below, then most likely you have disabled the windows Search service
In order to enable it, you need to go to Services. (open the start menu and type "sl" select Services)
Find windows Search, right-click on it and select Properties.
On the General tab, in the Startup type: field, select Automatic from the drop-down list. Click Apply. Then click Start, wait for the service to start
Then you need to check if hard disk partitions are allowed for indexing. To do this, go to Start > Computer, select the disk. Right click on it and select Properties
If the checkbox Allow indexing the contents of files is not checked at the bottom, set it and click OK. Indexing permission must be checked on all drives.
Search in File Explorer
In this part, we will consider an effective search in windows 7 explorer. Open Start\u003e Computer
We list the main elements of search or navigation:
- The address bar is where you are. Like in a browser
- History - where did you go and where were you today
- Forward and Back buttons - allow you to always go back a few steps or forward to places where you have already been
- Directory tree - shows where you are in relation to the entire storage system in your computer
- The content of where you are and where the address bar points
- Type of representation of the information where you are
- Search box
The type of information presentation allows you to choose one of eight display options for the convenience of searching. To open such a selection window, you must click on the down arrow to the right of the "View Type" icon
If you select the table view type, then you will be able to sort information by table columns by simply clicking on this column. Also, on hover, an icon (down arrow) appears at the right of the name of each column. By clicking on which you can open a drop-down menu with additional sorting options for faster search. In the figure, you can see the Date drop-down menu with the ability to select the one you need using the calendar.
You can also set a range of dates by highlighting the start date and selecting the end date while holding down the Shift key
Each column has its own drop-down menus that allow you to search for information even more efficiently.
Search box
You have entered a folder and want to find something. By entering a query in the search box in the upper right corner, you will search in this folder, which is indicated by the address bar, and in all directories nested in it. When placing the cursor in it, a pop-up window appears below, suggesting the use of various filters for the search
When you select a change date, a familiar window appears with a calendar and additional options.
Options allow you to select time intervals that do not intersect with each other. This may not seem logical, but this element makes the search even more efficient. Example. If you select Yesterday, you will be shown files modified yesterday. If you select Earlier this week, you will be shown files modified this week, excluding files modified yesterday. It turns out an interesting moment. If today is Tuesday and you select Earlier this week, you won't get results. Today is July 27th. If you select Last week, you will receive the files modified between July 15th and July 21st. If you select earlier this month, you will receive files modified from July 1 to July 14, thus excluding the current and last weeks.
But what if you need to make some kind of exotic search. For example, select files that have changed since last week. This is where search operators come in handy. First we select Files changed this week and put the statement
For convenience, the width of the search field can be changed by dragging the border between the address bar and the search field to the desired location.
You can and should combine different filters. For example, you sorted the files by modification date, now you can sort by size. Click on the search box and select the Size filter. The following window will open in front of you with a choice of range.
If you need files up to 50 MB and 100 to 200 MB, search operators will come to the rescue again.
size: 100mb
Of course, typing it is inconvenient because everything slows down because of the search. Therefore, it is recommended to create a query with notepad and copy it into the search bar.
As I wrote the article and tried different filters and sorting options, I managed to find such files, in such places, that you wonder. Search in windows 7 + indexing by efficiency like Google for the Internet.
In addition, you can search not only by modification date and size, but also by other file properties. For example, by extension, frame width, and others. If the search did not give the desired result, then below you are invited to choose to search the Libraries (see in the next section) in the Homegroup on your entire computer, choose another place to search, search the Internet and search the contents of files.
When you select Other search location, a window will open where you can select locations where the necessary files may be located using the checkboxes. These can be external hard drives, flash drives and other drives.
Then click OK and the search will automatically start in the selected places.
If you have chosen a place that is not in the index, the system will immediately warn you and warn you that the search may be slow. It is also proposed to add the selected place to the index
If you often search from this place, then you need to add. If this is an isolated case, then most likely you can skip it. The index will be smaller and the search will be faster.
Search in Libraries
A library is a place where a lot of useful information is stored. The computer is the same, only there the library is divided into four categories for ease of searching: Music, Video, Images and Documents. You can add up to 50 folders to each of these libraries. + you can create your own libraries. To create a new library, right-click on Libraries > New > Library. Give a name to the new library
It turns out that the Library is a virtual folder in which you can connect your real folders from various places on your hard drive. The library will be searched for all folders connected to it.
How to connect a folder to a library
Go to the library to which you want to connect the folder. In the "Includes" section, click on the link. In my case - 2 places
In the window that opens, click the Add... button and select the desired folder
Libraries are indexed by default and when the process is over you can instantly find the information you need.
Libraries have an extended set of filters, which adds convenience to the search
When you place the cursor in the search box, in addition to filters, your search queries that you entered in the past are also shown. If they suddenly start to interfere with you, you can easily remove them by hovering over the desired mouse cursor and pressing Del on the keyboard.
In Explorer, you can search in the folder in which you are and in all subfolders. In the library, you can search all connected folders at once, and since they are in the index, it will be fast. Another advantage of using libraries is advanced filters for easier searching. I don’t know how to get around using the Library in windows 7.
Since Libraries are something virtual, nothing happens to your files when they are deleted.
Conclusion
Friends! In this article, we touched on a small part, the tip of the iceberg, called search in windows 7. We also figured out indexing files on your hard drive and how this can help you find information faster. We stopped in more detail on the search in the explorer. Thanks to convenient filters, you can search and find information much more efficiently.
I would also like to add that the search conditions can be saved. To do this, click on the button of the same name on the toolbar
All saved searches are located in the folder of the same name (Searchs) in your profile.
To display the results for one of the searches, just go to the Explorer (on its left side) in the Searches folder and select the one you need. The results will appear immediately.
For more information about searching in windows 7, please visit http://www.oszone.net/11299/Search
Best regards, Anton Dyachenko
YouPK.ru
Windows search not working
(01.07.2011 12:23) Good afternoon. I have windows 7 Ultimate SP 1 Beta. After installing IE Explorer 9 and returning to IE Explorer 8, the search disappeared altogether! And before there was a search (before installing IE Explorer 9), but some kind of truncated one (maybe because I have a windows 7 Ultimate Lite system? (in general, I searched only by file names and sizes, and could not search in the content of files, for example, in *.txt or *.doc, *.pdf and others!!) I will say that in WinXP I like the search device much more!! But for serious reasons I can not go back to XP (Aser laptop) I tried to do what you advised: the first 2 and the last one: regsvr32 mshtml.dll - writes: mshtml.dll module loaded, but DllRegisterServer entry point not found Check that mshtml.dll is a valid DLL or OCX file and try again. What do you advise? Thanks in advance! |
