- This is the automatic launch of programs when you turn on the computer. Most often, this function is turned on independently when installing the program into the operating system. In some cases, autoload can be a very useful feature. You can configure it yourself and leave only the necessary programs in startup. It is worth considering that with a large number of active programs in autorun, the computer's RAM is consumed in a larger amount, as a result of which the system startup can slow down significantly.
Why are programs added to startup?
We have already said above that the installed utilities can independently add themselves to the startup registry. If necessary, the user can independently put any desired program into autorun so that when the computer is turned on, the system automatically launches a frequently used utility.
Why clean the startup registry?
First of all, this manipulation should be done if the computer system began to “slow down” and boot very slowly. Thus, you can free up a significant amount of RAM, the presence of which is an essential criterion for the quality of your computer.
Autoload may also contain super-important programs that contribute to the correct operation of the operating system. Therefore, when cleaning the registry, you should be extremely careful.
Shutdown in Windows 7
Read also: How to speed up Windows 10? TOP 6 Main ways to overclock the operating system
There are several answers to the question of how to disable startup programs in windows 7. Each of them implies a separate method of removal.
Method number 1. Uninstall via the start menu
Users who have been using this version of the operating system for quite a long time must have wondered “What is “hiding” in the Startup folder in the Start menu?”.
More advanced users have long guessed that this folder can be used to disable autorun programs. To do this, open the Start menu, go to All Programs, then find the Startup folder and open it.
If there are no third-party programs in startup, when you open the folder, it will say "(empty)".
If third-party programs are present at startup, you can remove any of them yourself. To do this, right-click on the required program and select the “Delete” item, after which the item will go to the trash, from which it can be permanently deleted using the Shift + Delete key combination.
This method is the easiest, but in this case it is impossible to see all the programs that are in autorun. Some of them are hiding.
If clearing this folder did not resolve unwanted automatic program loading when you start your computer, we recommend that you try one of the methods listed below.
Method number 2. Using MSConfig
Read also: [Instruction] "Service Host: Local System" loads Windows 10 disk
This program is present by default in any version of the Windows operating system. There are 2 ways to call it.
In the first case, open the Start menu and enter "msconfig" (without quotes) in the search bar. After the system detects it, double-click LMB to launch it.
In an alternative launch version, you need to launch the command line by pressing the Win + R hot key combination. In the window that appears, enter the command "msconfig" (without quotes) and click the "OK" button.
After starting the utility, a window will open in which you can remove programs from the startup registry.
To do this, go to the "Startup" tab, and then uncheck the boxes for those applications that you want to disable. After disabling unnecessary programs, click the "Apply" and "OK" buttons.
If you do not know what this or that application is responsible for, it is not recommended to disable it yourself, as you can disrupt the correct operation of the operating system.
After that, you will be prompted to restart the computer, automatically sent by the system. It is not necessary to restart the computer, so in this case the choice is yours.
When using this method, installation of additional programs is not required, since MSConfig is a standard pre-installed utility for all versions of the Windows operating system.
However, this method will not allow you to remove absolutely all programs and applications from autorun, so we recommend that you consider the methods below.
Method number 3. Removing manually from the registry
Read also: [Instruction] How to reinstall Windows (7/8/10) on a computer or laptop | 2019
The registry can also be launched in two ways - through the search menu "Start" or the command line.
In this case, you need to enter the command "regedit" (without quotes). After starting, the main registry window will open in front of you.
In the left part of the window there are two autorun folders - local and personal. The first address is:
A computer\HKEY_ LOCAL_ MACHINE\ Software\ Microsoft\ Windows\ CurrentVersion\ RunAnd for the second:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
To clean the registry from unnecessary applications, we need to get into the final folder (“Run”), navigating through the “tree” of folders as indicated in the address.
To remove applications from autorun, right-click on its name, and then select the "Delete" item in the context menu.
Cleaning is required in both sections.
In this case, we will use the program, which is freely available to all users on the official website. The utility is easy to use, takes up little space on your hard drive, but at the same time, it is the best solution for autorun cleaning. Download
On the developer's website, the program is provided only in English. We will tell you how to use it correctly without knowing foreign languages.
The program is downloaded in a ZIP format archive, which can be unzipped using any archiver (7zip, WinRar, etc.).
After you unzip the downloaded file, four shortcuts will be presented in the window in front of you. To install the program, we need the autoruns.exe file, which needs to be run as an administrator.
When you first launch the application, you will be required to accept the license agreement by clicking the "Agree" button.
After that, the window of the program itself will start. This means that the utility does not require installation on the computer system.
By default, the application window will open in the "Everything" tab at startup. It presents all, without exception, programs and applications included in autorun.
For the convenience of users, there are also tabs in which applications are divided into categories (Winlog, Driver, Explorer, etc.).
To remove autorun, you need to uncheck the box next to the unnecessary application. If you select a line with a single click of the LMB, then from the bottom of the window you can see information about the program that is in autoload (version, size, location path, etc.).
Method number 1. System partition
Read also: 3 Ways to disable "Sleep mode on Windows (Windows)" (7/8/10)
To go to the system partition, you first need to open the command line by pressing the Win + R hot keys. In the window that opens, enter the command "shell: startup" (without quotes) and press the key "OK".
The window that opens will display the autoload data for the current user.
To view the startup registry data for all users, enter the "shell: common startup" command (without quotes) into the command line.
The window that opens will display the startup applications for all users who have an account on this computer.
To disable autoload, delete folders of unnecessary applications.
Have you noticed that over time, even the most powerful PC starts to slow down. Why is this happening? The reason is the software installed in the system, which starts automatically after the OS starts. To solve this problem, consider how to remove autorun programs in Windows 7.
Is it necessary
What happens after turning on the PC? System utilities and programs are loaded for which automatic loading in the background is configured. It can be: Skype, ICQ, antivirus. They are displayed in the system tray (near the clock).
The more there are, the longer it takes to load. The installed software runs in the background and can be demanding on system resources (RAM).
Why do they automatically start
Some applications do this automatically. Invented by the developers with the following considerations:
- Be in touch. Refers to Skype, ICQ applications;
- Torrent clients for downloading files;
- DropBox, Google Drive services. Automatic launch is needed to synchronize the cloud and data on a PC;
- Utilities that control equipment. For example, software for switching monitor modes, programs for working with a video card.
Let's take a closer look at where to disable autorun programs in Windows 7
Do not disable applications whose purpose you do not know. This will lead to unstable operation of the system.
How to disable autorun programs in Windows 7
When using popular software, the launch is disabled in the application settings. For example, in Skype, to do this, disable the "Run at startup" checkbox.
But not every program has such an opportunity. What to do? Consider popular methods
Disabling using the Msconfig system utility
Use this method if you need installed software and don't want to remove it. There is no need to install or download anything from the internet. To remove the application, press the Win + R keys. A window will open where you write the command "msconfig.exe".
A window will open where go to the "Startup" tab.
A list of applications that start automatically after download will be displayed. Remove unnecessary ones. Disable the checkbox next to the program.
Click OK. A window will open where the OS will offer to restart the PC or exit without restarting. Select the second option, then when you turn off the PC, the system will be updated and the changes made will be activated.
The easiest way to open autorun programs on Windows 7
Go to "Start" - "Programs". Click on "Autoload". Everything that is displayed in it starts after the OS is loaded. How to limit startup? Delete all applications in this directory.
Disabling autorun programs in Windows 7 in the registry
Open the Registry Editor. Press "Win + R", then write the command "regedit". We find the registry branch, as in the screenshot. On the right, a list of programs and services that start at system startup will be displayed.
Do not remove services whose purpose is not clear to you. This will make the system unstable. If software is installed that you do not use at work, remove it from the HDD, and not just from startup. I recommend using .
How to disable autorun flash drive Windows 7
When the flash drive is connected, a window opens.
This is convenient, but if there are many files on the removable media, the system will freeze. This is especially true on weak PCs. It is also a way to distribute malicious software and viruses. To ensure the safety of it.
Click "Start" - "Control Panel" - "AutoPlay". A window will open where disable the checkbox from the item: "Use for all media".
How to turn off using third-party software
Conclusion
We looked at how to disable autorun applications in Windows 7. I recommend that if there are programs on the PC that you do not use, delete them. Use a specialized one for this.
Autorun is a very useful thing, especially when it comes to applications that need to be open all the time. For example, skype or antivirus. But often there are extra programs sitting there: they only interfere with work and load the system.
For example, the uTorrent torrent client. Of course, if you are constantly downloading something, then this may be fine, but in most cases it is not needed. So why load the system once again and spend Internet traffic?!
There are several ways to disable autorun. I will talk about each of them, because it is often not so easy to unroot a program. Let's start with the simplest.
Method number 1
Disabling autorun in the program itself
Often, autoload can be disabled right in the application itself. To do this, open the program, go to its settings and uncheck the box in the right place. I'll use uTorrent as an example.
one . In the upper right part of the window, click the "Settings" button and select the "Program settings" item in the list.
2. In the window that opens (in the "General" section), uncheck the box next to "Run uTorrent with Windows" and "Run minimized", click "Apply" and OK.
As you can see, everything is very simple. But, unfortunately, it doesn't always work. In some applications, this setting may be deeply hidden or absent altogether.
Method number 2
Clean up the "Startup" folder
In general, in Windows, moreover, in any version (XP, 7, 8, 10) there is a special folder where there are shortcuts to programs that are loaded with the system. It is located in Start, in "All Programs" and is called "Startup".
Found in it a hated application - delete without hesitation. This is done as usual: right-click - Delete.
If you do not have this folder, open it through the search. To do this, in Start, in the search bar, type shell: startup and open the found folder. Remove unnecessary applications and then open and clean the shell: common startup folder in the same way
In theory, of course, it is so, but in practice there are only a part of the programs that are in autorun. And it’s not a fact that among them you will find the one you want to get rid of.
Method number 3
Editing the System Configuration
One of the most reliable ways to remove a program from autorun. Works almost always.
one . Open Start, in the search box, enter msconfig and select the found file.
Remove the checkmarks from unnecessary programs, then click "Apply" and OK.
In addition to regular software, this list also includes utility programs, which are highly discouraged from being downloaded. Therefore, it is worth removing the birds only if you are sure that this is the “same” (unnecessary) program.
Usually, after that, a small window appears, where Windows prompts you to restart the system. Doing this is optional. In any case, the next time you turn on the computer, the changes will take effect.
Method number 4
Delete autoloads in CCleaner
CCleaner is such a program that helps the average user to clean the system of all junk (remove junk, clean the registry, and much more). Including through it, you can configure autorun.
Often this application is already installed on the computer and is located in the Start - All Programs - CCleaner folder. But if it is not there, and you would like to keep the system clean and tidy, then you can download and install this utility for free from here.
one . We launch the program, select the item "Service" (Tools), go to "Startup" (Startup). The Windows tab should be open here.
Programs that are in autorun mode will be highlighted in a more saturated color and opposite them in the Enabled column will say Yes or Yes.
2. We click on the program that we want to remove from startup, and click on the "Disable" button (Disable) at the top right.
3 . Restart the computer for the changes to take effect.
Method number 5
Disable autorun via registry
The registry is the place where all Windows system settings are located. You need to work in it carefully, because if you do something “wrong”, you can greatly complicate your life.
Particularly talented, for example, manage to completely disable the system, after which the computer simply refuses to work. So if you are not sure of yourself, it is better not to take risks: use the methods that I wrote about above.
one . Open the registry editor. You can do this through the search in the "Start" by typing the word regedit there
2. Open the folders in the following sequence (on the left side): HKEY_CURRENT_USER - Software - Microsoft - Windows - CurrentVersion - Run
3 . On the right side there will be commands that run certain programs. This is where they need to be removed.
And check the nearby RunOnce folder. Full path to it: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce. Here, too, there may be commands that launch all sorts of applications. We delete them in the same way.
You can also check and, if necessary, clean these two folders:
- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce
Which programs to remove from autorun, and which ones are better left
For the fastest possible loading and operation of Windows, it is desirable to free autorun as much as possible from unnecessary things. However, you should not be zealous, because this can lead to serious problems, especially if you touch service applications.
Programs such as iTunes, uTorrent, Mail.ru, Yandex can be safely removed. Usually they are specially added to startup right during installation and do nothing useful.
But everything that has such words as Intel, Nvidia, Microsoft in its name is better left. And, of course, do not touch the antivirus - it should work constantly from the moment the computer is turned on until it is turned off.
With messengers, the situation is ambiguous. System boot speed certainly suffers, but manual startup takes extra time. And sometimes you can completely forget to start some Skype and end up missing an important call or message. So decide for yourself.
In general, if in doubt, you can type the name of the program into the Yandex or Google search engine and find out what it does. Most likely, it will also be written there whether it can be removed from autorun without consequences or not.
Today, almost any installed program adds itself to startup. That is, it starts when you turn on your computer or laptop. What's bad about it? It's simple: the more you type, the slower your PC or laptop will turn on. And if there is not enough RAM, it will fail and slow down. Accordingly, in order to prevent this, and at the same time optimize the operation of the computer, you need to disable autorun programs in Windows. Not necessarily all - it is enough to remove only the extra ones and those that you rarely use.
- Open "Start" and select "Run".
- In the window that appears, write msconfig and press Enter.
- In the new window, go to the "Startup" tab and uncheck unnecessary items.
It's so easy to remove unnecessary programs from startup. After changing the settings and clicking the "OK" button, the system will ask you to restart your PC or laptop. It is not necessary to do this, but it is desirable.
If, after restarting the computer, you find that some software is missing, you can always open this window again and check the necessary boxes.
How to disable startup programs in Windows 7
The same method works on the "seven". He's just a little different.
What startup programs can be disabled? Preferably only those that you know. If the name of the program is unfamiliar to you, it is better not to touch it. Some of them are service and are needed for the normal operation of a computer or laptop. And if you turn them off, the consequences can be unpredictable.
To do this, go to Start - All Programs - Startup.
This is where the software is displayed, which is loaded when the computer is turned on (but the list is likely to be incomplete). And to remove it from startup, just delete the extra items (i.e. right-click - Delete).
Startup management in Windows 8 and 10 operating systems is carried out through the device manager
Accordingly, to disable autorun programs in Windows 10 or 8:
- Press Ctrl+Shift+Esc keys.
- Click More.
- Click the "Startup" tab (or "Startup" if you have an English version).
Finally, as promised, I will give universal tips on how to set up autoload in any version of Windows. This is done with the help of additional software.
For example, you can clean up startup using CCleaner. This is an excellent software that removes various garbage and optimizes the computer. So, to remove auto-start programs when you turn on your laptop or PC:
- Launch CCleaner.
- Go to the "Service" tab.
The software that is loaded with the OS is displayed here. Highlight the desired item and click the "Turn off" button (or double-click on it).
You can also switch to other tabs - for example, Google Chrome. All plug-ins (extensions) included in your browser are displayed here and, if necessary, you can disable unnecessary ones.
You can also remove unnecessary programs from startup in Windows using the excellent Auslogics BoostSpeed utility, which is designed to optimize PC performance. To do this:
- Run her.
- Go to the "Tools" tab.
- Select "Autostart".
And then everything is simple: select the necessary items and remove the checkmarks. If necessary, you can click on the line "Show additional. elements”, after which the list of applications will increase several times. But remember - turn off only what you know.
Many of them brazenly, without the permission of the user, climb into startup and can automatically start again when the computer is turned on, even after performing the above manipulations. In this case, you need to go to the software settings and uncheck the corresponding box.
To make it clearer, I will show how this is done using the example of the well-known Skype messenger.
Ready. Skype will no longer open when you turn on your PC, and you do not need to go into the Windows settings or use additional software for this. Similarly, you can disable autorun of any program.
True, this procedure will be slightly different. The desired item can be located anywhere and be called differently, but the essence is about the same.
Hey! Friends, do you know what I do on almost every computer that comes to me? That's right, I'm cleaning the list of startup programs. When I turn on someone else's computer, somewhere in about 80% of cases, I want to cry :). I just can’t watch the process when, along with turning on the computer, another 20 programs are launched, and the computer seems to have already turned on, but you have to wait a few more minutes until you can open the folder, etc.
As you already understood, I will write about how to remove programs from startup, and thereby speed up the loading of the computer many times over. In the article, I also wrote about autoloading programs, and how to clean up the autoload list. But there I wrote how to do it using the Total Commander program, also with additional utilities, and probably only I have such a version of Total Commander :), it is already old.
I remember I was still uneducated in the computer business, and my computer broke down, Windows went off the campaign, I don’t remember exactly. And I took my system unit for repair to a friend. He did everything for me, for only 20 UAH. and then installed this Total Commander (by the way, I set it to autorun, I suffered for a long time until I removed it from there :)) and since then I have been using it, though I only use it to clean the system, there is a good utility there. Okay, enough memories :), on to the case.
So in this article I will write about how to remove programs from autorun using a standard utility in Windows. There are many programs for this business, but I understand that you don’t always want to download and install some additional programs, and then also understand them. Especially if it is possible to do everything with a built-in tool.
Why clean the list of programs in startup?
Let's first understand where they come from. Everything is very simple, you install different programs, some you install yourself, and some are installed without your help. Some programs are added to the startup list, and when you turn on the computer, they start themselves. Sometimes it is convenient, and even necessary. It's good when, for example, Skype, antivirus, etc. automatically starts.
There are programs that start automatically, but you don't need them at all, or you need them very rarely. For example, the same DAEMON Tools Lite, an excellent program, but for example, I need it once a month, and I can run it myself. And here it always starts when you turn on the computer. Okay, it would just start up, so it also works all the time and eats RAM. And if there are ten such useless programs, or more? This all greatly affects the speed of turning on the computer and its operation.
I think you have already understood where the startup programs come from and why they themselves start when the computer is turned on. In short, autorun is a list of programs that should start when you turn on your computer.
Why they need to be removed from there, I think you already understood. All this is done in order to increase the speed of loading the computer and increase the speed of its work. After all, all these programs that are always running, of course, slow down the computer, and sometimes they also quietly use the Internet connection, I wrote about this case in the article.
So, we clean the startup list and your computer will breathe in a new way! Of course, I turned off unnecessary programs from startup, but I still check from time to time. It happens that garbage appears again in this list.
How to remove programs that run when you turn on your computer?
As I promised, we will use the standard tool.
On Windows 7:"Start", "All programs", “Standard” look for and run the utility “Run”.
On Windows XP:"Start", "Run".
In the window that appears, enter the command msconfig and click "Ok".
A window will open in which we go to the tab. We look at the list and remove all programs that you do not need to autoload.
Be careful!
Do not uncheck programs that you do not know. If you want, you can type the name of the program from the list in a search, such as Google, and see what kind of program it is. After checking, you can decide whether to disable it or not.
As you can see, my startup list is very modest. After you remove all unnecessary (uncheck), click "Apply" and "OK".
It happens that unnecessary programs can still be among the services. Therefore, in the window that we opened above, go to the “Services” tab. Immediately check the box next to "Do not display Microsoft services". And uncheck unnecessary services. To save the result, click "Apply" and "Ok".
A message will appear, you can exit without restarting, or restart your computer.
If you have disabled a decent number of programs and services, then after rebooting you will see how much faster your computer will turn on and work. I hope that my advice will be useful to you and you will use it, since the effect of it is very good. Good luck!
More on the site:
How to remove programs from startup (autorun)? Speed up computer boot updated: February 7, 2018 by: admin
