Installing 7 on a Lenovo laptop from a disk. How to reinstall Windows on a laptop: Step by step instructions

Good day.

Let's configure BIOS boot priority. Now I will show you in pictures (more precisely, pictures) how you can configure the UEFI BIOS and possible "pitfalls" that are rare, but occur.

Well, let's start setting up the BIOS of the Lenovo B590 laptop.

First, we have to go into the BIOS itself. Press the laptop power button as soon as the laptop display lights up, or rather, the matrix backlight is triggered, immediately press the F12 key (if I'm not mistaken, then it is the key to enter the BIOS).

P.S .: In new models (revisions) / BIOS`ax this key was changed to F1. For example on Lenovo b590 20206.

As you have completed everything that is written above, a bios will appear in front of you.

This is how it looks on the Lenovo B590.

And so, go to the Security tab. Ask why? I will explain further. Next, go to Secure Boot.

Secure Boot visible

If you have Enabled, then even by configuring boot from a flash drive or drive, your laptop will not allow you to boot from them, because it is a protection system and therefore needs to be disabled.

This is the pitfall in the UEFI BIOS, because. having configured Bios, the laptop will still not boot from the device you have selected.

We do it as shown from the bottom, that is, we disable this function.

We go to BOOT.

As we switched to BOOT, we see the following.

Here we set the priority of the download, be it a USB flash drive or a drive.

P.S .: To select a priority, select a flash drive or a drive, and use the + (increase) or - (decrease) device priority with the keys.

Press Esc, and rearrange the UEFI / Legacy Boot line from UEFI Only to Legacy First.

P.S.: It may be necessary to restart the laptop, since the BIOS mode changes (that is, new functions will be added).

The F10 key saves the BIOS settings and the laptop automatically reboots.

Congratulations! We set up the BIOS of the Lenovo B590 laptop and sorted out certain nuances, without which it would not be possible to start the laptop from a drive or flash drive.

Many users who bought laptops with Windows 8 preinstalled could not get used to this operating system. There is nothing surprising in this, the eight is very crude and there is a lot of superfluous in it. Windows 8 is also installed on the Lenovo B50 30 laptop. If you decide to part with a licensed, but inconvenient operating system and are thinking about installing windows 7, then you need to reconfigure the BIOS before inserting the disc.

On lenovo laptops, there are two ways to enter the BIOS:

Turn off the computer, then press the power button and immediately hold Fn and F2
Turn off the computer, and press the "system recovery" button with a needle or a paper clip, which is located on the right in the area of \u200b\u200bthe headphone jacks. (But I prefer the first way).

So, we are in Bios. There are a few things you need to change before installing Windows 7.

In the tab ExitOS OptimizedDefaults on the Other OS

BootPriority- LegasyFirst

Well, that's all the settings. We exit the BIOS with saving the settings and proceed with the installation of Windows 7

Yes, I almost forgot, there are drivers on Lenovo's official website only for Windows 64

Increasingly, there are questions on the Internet about how to install Windows 7 on Lenovo laptops. Moreover, people who are faced with such a problem, in most cases, do not understand what the installation problems are connected with. At the same time, their laptops are new, and there can be no breakdowns. But errors and stoppers nevertheless arise. Today we will talk about how the Windows system is installed on Lenovo laptops, since this is a very urgent problem.

Most common problems

If you ask everyone why they want to reinstall Windows on a laptop, then in most cases you will hear the answer that supposedly on all new computers there is a "eight" by default, which is not always possible to get used to and which does not always suit the user with its " sophisticated "gadgets. Much more convenient is the familiar to all "seven", which is both more understandable to use, and more convenient for solving specific problems. That is why on new laptops their owners decide to change the OS.

The most common problem when installing the "seven" on a Lenovo laptop is that the user cannot enter the BIOS at all. Even schoolchildren know that in order to reinstall Windows, you need to get into the basics of a computer — BIOS.

Other problems may arise already during the installation process. We will dwell on them further.

Multiple installation paths

So, you cannot enter the BIOS, and you already have some doubts about whether it is even on Lenovo laptops. In fact, there is, only it is arranged a little differently and the settings for a particular computer model need their own. But some are helped by the standard Fn + F10 command when starting Windows to enter BIOS.

In order for you to see that cherished opened Bios window, you should slightly prepare your technique. First, the installation disc is inserted into the drive while the computer is turned on. In our case, this is Windows 7. Then you have to turn off the computer, disconnect it from the power supply and remove the battery. Yes, it sounds ridiculous, but in most cases it helps. So, After that, it returns the battery to the place where it should be and turn on the laptop through the Novo button, which is located next to the start button.

During loading, you will see that you have entered the service menu. There you select the "Diagnostics" tab. From there, install the "UEFI Software Options". After that, your computer will notify you with a short message that it needs to be restarted. If you follow the recommendations of your technique, then after rebooting the computer itself will enter the BIOS.

Next, you should find the Security section where you disable the SecuryBoot setting. Next, in the main menu, look for the Startup tab. Now you need to arrange the boot order of the disks, which will guide the system. To do this, in the Boot tab, find the computer's hard drive (as a rule, it is designated as ATAHDD) and use the "+" key or the top arrow to raise this tab to the very top. There may also be a problem that the tab does not rise. Then it will act on the contrary - we lower the WindowBootManager tab to the very bottom. In the second place in the list should be the name "ATAPICD1", and after it the parameter from which the Windows system will be reinstalled.

After all these tricky manipulations, go back and look for the UEFI \\ LegacyBoot tab and select the LegacyOnly parameter there. After you have saved using the F10 key, you can start a standard reinstallation of the system.

Increasingly, there are questions on the network about how to install windows 7 on Lenovo laptops. Moreover, people who are faced with such a problem, in most cases, do not understand what the installation problems are connected with. At the same time, their laptops are new, and there can be no breakdowns. But errors and stoppers nevertheless arise. Today we will talk about how the windows system is installed on Lenovo laptops, since this is a very urgent problem.

Most common problems

If you ask everyone why they want to reinstall the windows system on a laptop, then in most cases you will hear the answer that supposedly on all new computers there is a "eight" by default, which is not always possible to get used to and which does not always suit the user with its " sophisticated "gadgets. Much more convenient is the familiar to all "seven", which is both more understandable to use, and more convenient for solving specific problems. That is why on new laptops their owners decide to change the OS.

The most common problem when installing the "seven" on a Lenovo laptop is that the user cannot enter the BIOS at all. Even schoolchildren know that in order to reinstall windows, you need to get into the basics of a computer - BIOS.

Other problems may arise already during the installation process. We will dwell on them further.

Multiple installation paths

In order for you to see that cherished opened Bios window, you should slightly prepare your technique. First, the installation disc is inserted into the drive while the computer is turned on. In our case, this is windows 7. Then you must turn off the computer, disconnect it from the power supply and remove the battery. Yes, it sounds ridiculous, but in most cases it helps. So, After that, it returns the battery to the place where it should be and turn on the laptop through the Novo button, which is located next to the start button.

If this standard procedure did not help you, then you always have the opportunity to go to the official website of the Lenovo manufacturer and see a few tricks for installing the system there. But after you have found the BIOS on a LENOVO laptop, then you should not have any further problems with reinstalling, as it is standard for all models of computers and laptops.

windowsTune.ru

Lenovo B50 30: installing windows 7. Step by step instructions

Lenovo has long been known to the vast majority of users as a manufacturer of high-quality and inexpensive laptops. Laptops have good technical characteristics. However, incidents occur with this manufacturer. Nobody is immune from this. For example, on the Lenovo B50-30 model, installing windows 7 by default was not possible. Why did this happen and how to install the "seven" on this laptop, if it is just from the store? In this we will now understand.

Why did it happen?

Lenovo had no ulterior motive. It's just that this laptop model was developed and sold in 2013. Let's remember what they were doing at Microsoft at that time? Right. They promoted their new operating system (windows 8) in all sorts of ways (sometimes very aggressively). Some manufacturers were forced to somehow limit the ability to install the "seven" on their devices. On the official website of the company, there are no windows 7 drivers for the Lenovo B50-30 model at all.

The most interesting thing is that updating the BIOS did not solve the problem in any way (although it should have). Curses and all sorts of disasters rained down on the company. But all this did not last long. Craftsmen quickly solved the problem. The matter turned out to be in the BIOS settings. By default, the manufacturer had pre-installed options that made the installation of the "seven" impossible. And if you consider that for most users of BIOS - a dark forest, then a kind of "trick with the ears" worked quite well on Lenovo B50-30. How to install windows 7 on this model? As easy as pie. And you will be convinced of this now.

BIOS settings for installing "seven"

The first step is to go into the BIOS settings. To do this, when loading a laptop, you need to press the combination of keys FN and F2. Now you should go to the General Settings tab. Here you need to select the item Load Default Settings and click OK. Next, go to the Boot tab and select the Other OS item in the OS Optimized Defaults line. Now it remains to exit BIOS, not forgetting to save all the changes.

In some cases (especially difficult), you will still have to install the "eight" and use it to update the BIOS firmware. Sometimes this is necessary, since the stock BIOS does not always give the user the opportunity to change the operating system in the boot options. But after the update everything should be fine. Then you can restart your Lenovo B50-30. Windows 7 installation is now possible.

Installation process

It differs little from the standard one. In fact, it is not different at all. But it's better to describe it all. So, the algorithm for installing the "seven" on Lenovo B50-30 after all the manipulations with the BIOS:

Insert a USB flash drive or disk with windows installation files.
At boot time, we hold down the FN and F12 key combination. A dialog box will appear.
In the window, select the medium (CD-DVD for a disc or USB-HDD for a flash drive). This will start downloading the system installer.
In the next window, select the installation language and country of location. Click "Next".
Now select the item "Install windows only" and create a disk layout. Remember that the "seven" is placed only on the NTFS partition. The rest of the sections can be adjusted after the installation of the system.

Click the "Next" button - the installation process begins. The laptop will restart several times.
After the last reboot, you will be prompted for a username and password.
Press the "Next" button and wait. After a while, the installed system will start.

You have mastered your Lenovo B50-30. Windows 7 installation is complete. However, before using the system, there are a few other things to tweak. For after installation, you will have a "bare" operating system, which really can't do anything, since there are no devices installed in it. This means that you have to install drivers.

Device Drivers

What is the problem with Lenovo B50-30 laptop? There are no WiFi drivers (windows 7) or any other drivers for the "seven" on the official website. And Wi-Fi is critical. After all, without the Internet, you will not be able to download other drivers. There are several options here. You can download drivers from the "eight". In some cases, they are fine. Or you can go to the website of the component manufacturer and download the latest version from there. But in any case, you will need a second computer with Internet access.

Sometimes the websites of equipment manufacturers do not have software for the Lenovo B50-30 model. However, there will be a driver for Wi-Fi anyway. It is worth putting only it. And further problems can be solved through the "Device Manager" in the installed OS. It allows you to update hardware drivers from the official Microsoft servers. As long as the "seven" is officially supported, they will not go anywhere from there. The main thing is to start the Internet on this piece of hardware. As soon as you do this, life immediately becomes easier.

Conclusion

Undoubtedly, this article will be useful for those who are "lucky" to purchase a Lenovo B50-30 laptop. Installing windows 7 on it is possible, although the process is somewhat unusual. For some inexperienced users, it may seem overwhelmingly complex. But in fact, there is nothing difficult about it. The main thing is to update the BIOS and slightly change its settings. After that, it will be possible to put at least "seven", at least "Linux", at least "MacOS" on this laptop.

fb.ru

Lenovo G50-30 laptop - how to install windows 7

Good day everyone. They brought the Lenovo G50-30 laptop to install the system. It seems that I have been doing this for several years. The laptop is new. I got into the settings, disabled UEFI, Secure boot. Included compatibility with wines7. Started the installation. After copying the files, it crashes into a blue screen "The BIOS in this system is not fully ACPI compliant Stop 0x000000A5". I tried to put win XP - even with F7 - the same eggs. Tried to boot from WIN XP PE, WIN7 PE \u200b\u200b- the same blue screen. Victoria, Memtest also does not start. I'm in stupor. It is clear that it swears at ACPI, but why the tests do not run from under DOS? There are no items with ACPI settings. There was one crazy idea that the problem was with the RAM. But the laptop is guaranteed and the whole bottom is in the stickers. You won't be able to get inside. What are the options?

How to install windows 7 on a Lenovo G50-30 laptop - recipe # 1.

First, follow the instructions from the official Lenovo website.
Next - boot from the windows 7 installation disk.
Press Shift + (+ Fn) F10 - the command line will open.
Run the console utility for working with disks, partitions and volumes in windows in the command line: diskpart
Browse the list of disks to find the one to work with.
Select disk 0
Clean the drive from other partitions.
Convert GPT disk to MBR.convert mbr
Quit Diskpartexit

How to enter BIOS on Lenovo G50-30 laptop?

To enter BIOS on Lenovo G50-30 press Fn + F2 at startup.

Lenovo G50-30 + windows 7 - recipe number 2.

In the BIOS, in the Exit -\u003e OS Optimized Defaults tab, install windows 7 OS.
In the Configuration -\u003e USB mode tab, set 2.0. (then we will return 3.0)
In the Boot tab, set Boot Mode, Boot Priority to.
Choose Exit -\u003e Exit Saving Changes, confirm YES.
During the reboot, press Fn + F12, the Boot Manager opens, where we select Legacy CD ROM (DVD).

windows 7 on Lenovo G50-30 using BIOS update - recipe # 3.

In the current windows 8, we download the BIOS from the official Lenovo website and update to the latest version.
Install windows 8 x64, go to the partition settings, destroy all partitions, create new ones - for the system and the rest. (Item # 1 and Item # 2 can be swapped, depending on whether Win8 is already installed or not)
We go into BIOS, change USB3.0 to USB 2.0 in the second tab.
In the last tab, I change the OS from Win8x64 to Win7.
In the same place, click Load Defalt Settings.
We save everything, reboot the laptop and install Win7 x64 without any problems (it doesn't matter from a disk or flash drive).

Solution 0x000000a5 + Lenovo G50-30 with windows 7 already uploaded to the disk - recipe number 4.

If windows 7 is already uploaded to disk (for example, sysrep), then you can overcome bluescreen like this:

We go into the BIOS, change in the second tab USB3.0 to USB 2.0 (then we will return it)
In the last tab, change the OS from Win8 to Win7.
Click Load Defalt Settings.
Save & Exit.

The procedure is important! There will be no more Bluescreen.

Recently asked to install windows 7 instead of windows 8 on a laptop Lenovo B590. As usual, I tried to enter the BIOS through F2, then through other keys and ops .. it did not work. I had to dig around and find a way out, or rather an entrance :) Than today I will gladly share with you.

On the Internet, I also saw quite a few questions from those who wanted to change the eight to seven, but everyone had problems with entering the BIOS. Below you can watch the video tutorial on installing windows 7 on lenovo B590, and if suddenly it is impossible to watch the video, we read the manual in the text version.

How to enter BIOS on Lenovo B590 laptop

First, turn on the laptop and insert the windows 7 disk into the drive. Turn off, take out the battery, pull out the mains power from the laptop. We put the power in place and start the laptop from the NOVO button. It's a tiny little button next to the power button.

In a few seconds you will be taken to the service menu. We select the Russian language, the keyboard layout is Russian. then select the Diagnostics item, Extra options, UEFI firmware options.

Now the laptop will require a reboot - press the restart button and voila, we entered the BIOS.

Now, with the arrows on the keyboard, go to the Security section, select the Security Boot item with the down arrow and press enter.

the Securu Boot parameter is set to Disabled - disabled.

We return to the main BIOS menu with the Esc key and with the right arrows go to the Startup section.

Select the Boot item - press enter. In this section, use the arrows to find your hard drive - ATA HDD ... and with the + (plus) button located on the right of the numeric keypad, we raise it to the very top of the list. If it does not go up to the very top, then select Windows Boot Manager and use the - (minus) key to lower it down.

In the same way, we raise to the second place with a cidir - ATAPI CD1

Next in line you can put the device with which windows will be installed if it is not a built-in floppy drive.

Go back again with the Esc key, click down on the UEFI / Legacy Boot item, change the UEFI Only parameter to Legacy Only.

We save the configuration with the F10 key and agree with the enter key.

Keep in mind: if you forgot something, changed it, or set it up wrong, you can enter the BIOS on the Lenovo B590 to restore the default settings only by removing the back cover of the laptop (it's okay - only 2 screws) and taking out the cmos battery for a while. Then don't forget to set the correct date and time.

How to install windows 7 on Lenovo B590 laptop instead of windows 8

Now, in fact, the very process of installing Windows.

After rebooting, you do not need to press any keys, although we have assigned the F12 key to enter the boot device selection menu, the laptop will find the boot device itself and show the installation menu.

At the beginning of the installation, be sure to select Complete installation.

how to partition hard drive windows 7

Next, you will go to the hard drive where you will have to delete all existing partitions... Everything is obligatory, otherwise you will not be able to reformat the screw from CDA to NTFS. To delete, click on the right Disk settings - select partitions one at a time and click Delete.

And do not forget to think about the fact that you are losing the factory warranty. And if changing the operating system is more important for you than guarantees, then we continue to dissect the hard drive.

Now we need to create 2 partitions, one more, which the system will create itself with a size of 100 MB, do not count. To do this, on the right, click Create, select the desired size (I set 200,000 MB - a little less than the second section) and click ok. We do the same with the rest of the unoccupied space, only we do not set the size, but leave it as the system suggests.

With the partition of the hard disk finished, select the second partition (the first is occupied by system files and has only 100 MB of space) and click on the installation

Services and bases for the selection of keywords

How to Get the Most Out of Instagram 'Search' and 'Recommendations' for Your Business

The best software for recording sound from a microphone

How to select an object in Photoshop and separate it from the background