Download Windows 10 System Restore. Such a USB flash drive should have every Windows user

Windows 10, like previous versions of this operating system, is not completely immune to crashes, computer viruses, hardware failure, and other problems. Therefore, if you have any problems when working or loading the OS, you can use the built-in tools to return the operating system to a working state.

There are several ways to restore Windows 10.

If the computer boots:

Using a restore point.
File history.

If the computer does not boot:

Using a recovery drive.
Using the installation disc.

Now let's look at these recovery options in more detail.

Method 1 - Using a system restore point

Windows periodically saves information about programs, system settings, drivers, registry, and drivers in system restore points. This occurs before significant changes to the OS, such as installing software, drivers, or updating the system. You can also create a restore point manually. You can read how to do this in.

It is worth noting that after recovery, your data will remain intact, and drivers, programs and updates installed after the creation of the recovery point will be deleted.

1. Launch the system properties window (keyboard shortcut Windows + Pause) and open the item "".

2. Press the " Reestablish"And then" Next ". In the list of available restore points, select the desired item and click "Next" again.

3. Check the selected parameters again, press the " Done"And then" Yes "in the warning window. The recovery process starts and the computer restarts.

Method 2 - Reset to Factory Settings

In Windows 10, it is possible to reset the system settings to their original state. In this case, you can do a full reset or save user files. The advantage of this method is that if you want to reinstall the system, you do not need to install Windows from scratch, you just need to perform a reset.

To use this function, you need to go to the next section: " Computer Settings -\u003e Update & Security -\u003e Recovery -\u003e Reset Computer"And click the" Start "button.

We have covered in more detail the process of resetting to factory settings in this article:

Method 3 - File History

This method is not directly related to system recovery, but in conjunction with other methods can also be useful.

File History allows you to make automatic and manual backups of your files. You just need to activate this function and specify which folders you want to save. The system will automatically back up your documents at a customizable frequency. If necessary, you can easily restore files of the version you need.

You can read how to enable, configure and use this tool in this article:

Method 4 - Using a recovery disc

If Windows 10 won't boot, you can try reanimating your system using a recovery disc, which will allow you to access additional startup options.

If you don't have a recovery disc yet, follow these instructions:

After booting from the USB recovery drive, go to the " Diagnostics -\u003e Advanced Options».

Here you can use several options for reanimating your computer:

Restore Windows using a restore point. We have already considered this option above. Its meaning is the same, only the launch is done in a different way.
System image recovery. This method has been known since Windows 7. If you have previously created a system image in Windows, you can easily restore it via a recovery disc. How to create a system image in Windows 10 can be read here:
With the next step, you can try to fix boot errors automatically.
For more advanced users, it is possible to run the command line for system recovery or other purposes.
Well, the last option is to return Windows to the previous build.

It should also be noted that if you wrote the system files to the disk when creating the system recovery disk, then you will have the opportunity to reinstall Windows from this disk. But if you bought a computer with Window 8 (8.1) preinstalled with a hidden recovery partition, then the version of the system that originally came with the computer will be restored.

Method 5 - Using the installation disc

If Windows won't boot and you don't have a recovery disc, you can use the installation disc to reanimate your computer.

You can burn the installation disc to USB or DVD using the downloadable media creation tool.

After booting from the installation media, you will see a window in which you need to select the language options and click the "Next" button.

Return the computer to its original state. A factory reset will be performed with or without saving user files. We have already considered this tool above (method 2).
Extra options. Just like on the system restore disk, a list of tools will open with which you can restore Windows performance using restore points, a system image, etc.

We have covered the main ways to restore Windows 10. Usually, they are enough to get the system back to working condition. You could also add a clean installation of Windows here, but this is already an extreme measure and is indirectly related to system recovery.

The new Windows 10 operating system from Microsoft has already gained popularity among millions of PC users around the world. But like all new products, Windows 10 is not without its flaws. Many users of this OS have bootloader problems... Most often, this problem occurs due to a new operating system update policy.

Now in Windows 10, you cannot turn off updates, as it was in Windows 7 and XP.

The problem with the bootloader itself manifests itself when the user does not wait for the end of the system update and turns it off the POWER button.

After the user turns on the computer again, he sees such a message on his monitor screen.

This message indicates that your bootloader is damaged and should be restored. It is also worth noting that shutting down the computer during the update is not the only reason for the breakdown. The bootloader can still be damaged viruses and various malware... Still quite common reasons for its breakdown are faulty HDDswhich are broken sectors, that is, the boot record will be located on these sectors. Also, the cause of the bootloader breakdown may be installing a junior OS over Windows 10... To help our readers restore the bootloader, below we have prepared examples in which we will describe in detail how to restore it.

The easiest way to recover

Seeing a message about a bootloader malfunction, the first thing a PC user has to ask is how to restore the Windows 10 bootloader. In this example, we will describe the easiest way to restore it. For this example, we'll need.

If you do not have this disk and Internet access, you can create it on another computer with the same OS.

You can also use the original Windows 10 installation disc for this task. Well, let's get started. Insert the recovery disc into the drive and boot from it when the computer starts.

In the first window of the recovery drive wizard, you must specify keyboard layout, after which the wizard menu will open.

In this window we will select the second tab " Troubleshooting"And immediately go to the next" ".

In additional parameters, we are interested in the "" tab. After clicking on this link, the wizard will ask you to select an OS to restore its launch.

The studied computer has one Windows 10 operating system, so there is only one choice in the wizard. After selecting the OS, the system will begin the procedure for finding computer malfunctions and must restore the damaged bootloader.

If using this method you cannot restore Windows 10 to work, then in the following examples we will describe a detailed process for restoring the boot sector using system utilities DiskPart and BCDboot.

Repair Windows 10 bootloader using command line

For this method, we also need Windows 10 recovery disc... Let's boot from the disk, as in the previous example to the point "". In this menu, we are interested in the "" tab, on which we will go.

First of all, we will run the console utility on the command line DiskPart... To do this, enter the diskpart command in the console

We need this utility to displaying information about all local disks in the system... Now we need to find the bootloader partition number. This is usually a hidden partition with a size of 500 MB. This partition is created automatically by the Windows 10 installer. Next, to search for it in DiskPart, we will enter the list volume command

From the image you can see that the partition with the boot record is in the first volume on the C drive. Also in the image you can see that Windows 10 itself is installed on the D drive. Now we must exit the disk program. This can be done with the exit command

After exiting DiskPart, enter the command bcdboot.exe D: \\ Windows Also note that the command uses drive D, since it is on it that a dozen is installed.

This command completely restored dozens of boot files. The principle of this command is to use the utility BCDboot... The developers specially created this utility to work with Windows boot files... It is also worth noting that thanks to the same utility, the Windows installer creates a hidden partition and copies boot files to it.

Repairing the Windows 10 bootloader using the command line (Method two)

In the second method, we will also use the utilities DiskPart and BCDboot and try to overwrite the bootloader. To do this, launch DiskPart and find out which disk contains our hidden partition and the partition on which Windows 10 is installed. Launching this utility is described above.

Now we need to format the hidden partition that is in the first volume. To do this, we will type the select volume 1 command which will select our hidden encrypted partition of 500 MB.

The next step will be to format the selected section. This is done in order to erase all files from it. For this operation, enter the command in the console format fs \u003d FAT32

After formatting our partition, exit the disk utility and enter the new command bcdboot.exe D: \\ Windows which we entered in the previous example.

This command will not fix the bootloader files as in the previous example, but create new... As you already understood, this method is used if the first one did not work.

Another way to restore Windows 10 boot using command line

This method requires a utility Bootrec... Unlike the previous utility, this utility does not restore bootloader files, but restores boot record... That is, she rebuilds MBR - the first sector on the HDD. It is very important for the operating system that the MBR is safe and sound. When a computer starts up, its BIOS first of all looks for the MBR to start the operating system from. For this example, we will run the command line as in the previous examples. The utility in question has two main commands / FixMbr and / FixBoot The first command is required to fix MBRand the second creates a new... First of all, consider the situation when our MBR is damaged. To do this, enter the first command in the console.

In the image above, you can see that the operation was successful, which means that the MBR has been restored.

Now let's consider the situation when the first method does not work, that is, we will create a new MBR sector. To do this, we will use the second command.

From the image above, you can see that the new MBR sector was created successfully.

The examples show how easy it is to recover the MBR sector using the Bootrec console utility. If you have problem with startm Windows 10, we advise you to use this example first.

We clean the system from malicious software before restoring the bootloader

If a malicious program is the cause of the bootloader failure, then this the malicious code must be removed before recovery... In this situation, it will help you. This is the rescue disk that has many tools for restoring your computer, as well as treating it from viruses... You can download Dr.Web LiveDisk on its official website www.drweb.ru. This Live CD is linux based and free. This disc is distributed as an ISO image that can be burned to both an optical disc and a USB flash drive. After the image is written to the disk, launch Dr.Web LiveDisk.

In the start menu, select the first item and continue loading Dr.Web LiveDisk. After a few seconds, the Linux-based OS should start, which is actually Dr.Web LiveDisk.

In this operating system, you can completely clean your computer from viruses and even make a backup of all information.

Also useful is the fact that this OS has full Internet support and a built-in browser. Firefox.

Summing up

In conclusion, I would like to say that if you know all the intricacies of bootloader recovery, then you can quickly fix your computer. It is also worth paying attention to the situation when it is impossible to restore the boot sector and the bootloader itself. In this case, you need to play it safe and use the full system recovery tools. Such means are complete system image, created by means of the Windows 10 operating system itself, as well as a program such as Acronis True Image... We hope that our material will help you recover the bootloader from MBR, and your computer will function as before.

How to burn a Windows 10 image to a USB flash drive

To recover damaged Windows 10 files, you need to create bootable media.

When installing an operating system on a computer, by default, it is proposed to create it on a USB flash drive in automatic mode. If for some reason this step was skipped or the flash drive was damaged, then you need to create a new image of Windows 10 using third-party programs such as MediaCreationTool, Rufus or WinToFlash, as well as using the "Command Prompt" administrator console.

Since all modern computers are released with support for the UEFI interface, the most widespread methods of creating bootable USB drives using the Rufus program and using the administrator console.

Create a bootable UEFI flash card

If your computer has an integrated bootloader that supports UEFI, you can only use media formatted according to the FAT32 standard for installing Windows 10.

In cases where a bootable flash card for Windows 10 is created in Microsoft's MediaCreationTool, the structure of the FAT32 file allocation table is generated automatically. The program simply does not offer any other options, immediately making the flash card universal. Using this universal flash card, you can install tens on a standard hard drive with BIOS or UEFI. There is no difference.

There is also an option to create a universal flash card using the "Command Line". The algorithm of actions in this case will be as follows:

Launch the Run window by pressing Win + R.
Enter the commands, confirming them with the Enter key:
Download the ISO file of the Tens from Microsoft or from a location of your choice.
Double-click on the image file, expanding it and simultaneously connecting it to the virtual drive.
Select all files and directories of the image and copy them by clicking the "Copy" button.
Insert everything into an empty area of \u200b\u200bthe flash card.
Copy files to the free space of the flash drive
This completes the process of forming a universal bootable flash card. You can start installing "tens".
Removable disk prepared for Windows 10 installation

The created universal flash card will be bootable both for computers with a basic input-output system BIOS, and for integrated UEFI.

Video: How to create a bootable USB flash drive for Windows 10 using Command Prompt or MediaCreationTool

Create flash card only for computers with MBR partitions supporting UEFI

Quickly create a bootable USB flash drive for Windows 10 to install on a UEFI-enabled computer using third-party software. One of these programs is Rufus. It is quite widespread among users and has proven itself well. It does not provide for installation on a hard drive, it is possible to use this program on devices with an uninstalled OS. Allows you to perform a wide range of operations:

flashing the BIOS chip;
generate a bootable flash card using the ISO image of the tens or systems such as Linux;
carry out low-level formatting.

Its main drawback is the impossibility of creating a universal bootable flash card. To form a bootable flash card, the software is pre-downloaded from the developer's website. When forming a flash card for a computer with UEFI and a hard drive with MBR partitions, the procedure is as follows:

Select the type of removable media in the "Device" area.
Set "MBR for computers with UEFI" in the "Partition scheme and system interface type" area.
Set the parameters for creating a flash drive
Click the button with the drive icon.
Select an ISO image
Highlight the file selected for the installation of "tens" in the opened "Explorer".
In the "Explorer" select the image file to install
Click the Start button.
Press the "Start" key
After a short period of 3-7 minutes (depending on the speed and RAM of the computer), the bootable flash card will be ready.

Create a flash card only for GPT computers that support UEFI

When creating a flash card for a computer that supports UEFI, with a hard drive that has a GPT boot table, you need to apply the following procedure:

Run the Rufus utility to create bootable media.
Select removable media in the "Device" area.
Check "GPT for UEFI Computers" in the "Partition Scheme and System Interface Type" area.
Select FAT32 (default) in the File System area.
Select the option "ISO-image" next to the line "Create bootable disc".
Swipe your settings
Click the drive icon on the button.
Click on the key with the drive icon
Select the file in the "Explorer" to write to the flash card and click on the "Open" button.
Select the ISO file and click "Open"
Click on the "Start" button.
Click on the "Start" button to create a bootable flash card with the utility
Wait until the bootable flash card is created.

Rufus is constantly being improved and updated by the manufacturer. The new version of the program can always be obtained on the official website of the developer.

To avoid problems with the creation of bootable media, you can resort to a more efficient recovery option "tens". To do this, the system must be installed from the Microsoft website. At the end of the process, the system itself will offer to create rescue media for recovery. You need to specify in the choice of media the flash card and wait until the end of the copy creation. In case of any failures, you can restore system settings without deleting documents and installed applications. And also there is no need to reactivate the system product, so it interferes with users with a constantly pop-up reminder.

Video: how to create a bootable flash card using Rufus

How to restore a system from a USB flash drive

The most popular methods of system recovery are:

recovery from a flash drive using BIOS;
recovery from a USB flash drive using the Boot menu;
boot from a USB flash drive created during the installation of Windows 10.

System recovery using BIOS

To recover Windows 10 from a flash card through a UEFI-enabled BIOS, you must assign boot priority to UEFI. There is a choice of initial boot for both a hard drive with MBR partitions and a hard drive with a GPT table. To assign a priority in UEFI, go to the Boot Priority block and set up a module where a flash card with Windows 10 boot files will be installed.

On computers with older basic I / O, the boot algorithm is slightly different and depends on the manufacturer of the BIOS chips. There is no fundamental difference, the only difference is in the graphic design of the window menu and the location of the boot options. To create a bootable USB drive in this case, you must do the following:

Turn on your computer or laptop. Hold down the BIOS Enter key. Depending on the manufacturer, this can be any F2, F12, F2 + Fn, or Delete key. Legacy models use triple keyboard shortcuts, such as Ctrl + Alt + Esc.
Put the USB flash drive in BIOS as the first bootable disk.
Insert the USB flash drive into a USB port on your computer. When the installer window appears, select the language, keyboard layout, time format and click on the "Next" button.
Set the parameters in the window and click on the "Next" button
Click the "System Restore" line in the lower left corner of the window with the "Install" button in the center.
Click on the line "System Restore"
Click on the Diagnostics icon in the Select Action window and then on Advanced Options.
In the window, click on the "Diagnostics" icon
Click on "System Restore" in the "Advanced Options" panel. Select the desired restore point. Click on the "Next" button.
In the panel, select a restore point and click on the "Next" button
If there are no restore points, then the system will start using the bootable USB flash drive.
The computer will start a system configuration restore session, which runs automatically. At the end of the recovery, a reboot will take place and the computer will be brought to a working state.

Video: booting a computer from a USB flash drive via BIOS

System recovery using the Boot menu

The boot menu is one of the functions of the basic I / O system. It allows you to configure the boot priority of devices without resorting to BIOS settings. In the Boot menu panel, you can immediately set the bootable USB flash drive as the first boot device. There is no need to enter BIOS in this case.

Changing the settings in the Boot menu does not affect the BIOS settings, since changes made at boot are not saved. The next time you turn on Windows 10, it will boot from the hard drive, as configured in the basic I / O system settings.

Depending on the manufacturer, the Boot menu can be launched when the computer is turned on by pressing and holding the Esc, F10, F12 key, etc.

Press and hold the Boot Menu launch key

The boot menu can look different:

Due to the high-speed boot of Windows 10, you may not have time to press the key to invoke the boot menu. The thing is that the "Quick Start" option is enabled by default in the system, the shutdown does not occur completely, and the computer goes into hibernation mode.

You can change the boot option in three different ways:

Press and hold the Shift key while shutting down the computer. The shutdown will take place normally without going into hibernation.
Do not turn off the computer, but reboot.
Disable the "Quick Start" option. For what:
- open the "Control Panel" and click on the "Power supply" icon;

This instructional article describes in detail how a Windows 10 recovery disk is formed. Also, an example of using such a media to return the "tens" to a functional state in case of problems, when the OS refuses to boot even in safe mode, is considered.

Already from the very name of the drive, it becomes clear that this media is intended to reanimate the operating system or perform actions in it that cannot be performed from under a running Windows 10 (full reset, rollback to the previous state if the PC does not turn on or restore "dozens" from a pre-formed backup).

People who decide to switch to a new operating system often come across the concept of a recovery disk, but not everywhere there is information about what it is. In order to solve such a problem, as well as to teach users to create drives for Windows reanimation, this article was written. The material is presented in such a way that a novice user does not have any questions regarding the creation of the resuscitation disk "tens" and its practical use.

A disk means a flash drive due to the relevance of the latter, despite the outdated name.

How to create Windows 10 recovery media using Control Panel

Microsoft provided an elementary option for forming a USB flash drive to restore Windows 10, slightly optimizing this mechanism, which is familiar with Windows 7. Since then, the principle has remained the same: a few clicks and a couple of minutes of waiting, and the media created on another computer is also suitable for solving the problem, but in if you are using a Windows 10 image of the same bit and OS edition.

1. We visit the Control Panel.

There are many ways here: executing the "control" command, using the search bar, the Win → X menu, a shortcut in a convenient place.

2. Select the "View" field value as "Large icons", if it is different.

3. Call the "Restore" applet.

Some of the actions below (for example, the following) will require administrator privileges or work under such an account.

5. Determine the need to activate the option for backing up system files to the Windows Resume USB flash drive.

If you activate the option, the process will take longer due to copying a much larger amount of information to the media, but at the same time, the Windows recovery procedure will be much easier. Even when the system recovery image is missing or inoperable (after all, all the necessary files are present on the drive).

6. Connect the removable USB drive to the corresponding port, if it is not already connected.

Keep in mind that it will be formatted and the information will be overwritten, so take care to create a copy if necessary.

8. We are waiting for the completion of the copying process.

The appearance of the next window signals the completion of copying files.

9. Click "Finish".

That's all, the Windows 10 recovery disc is ready for use.

After booting from a finished drive, using the Boot Menu, or changing the priority of boot devices, you can visit the recovery environment, having all the necessary features for this.

For your information: the drive for reanimating the operating system can be used as a regular USB flash drive if there is free space on it. In order not to affect the files and directories located on it, you should change their attributes to "Hidden" through the properties of the target objects or create a directory for your own files.

Example of operating Windows 10 bootable recovery media

The use of the created media, in contrast to the system recovery disk, is permissible on a computer with any version of Windows 10, regardless of the installed updates and the status of the license. But a more significant feature of such a flash drive is that there is no need to download the distribution kit as an ISO file from the Internet.

We go into the recovery environment of the "tens".

1. Using the boot menu of the PC (Boot Menu) select the USB stick as the primary boot device.

2. We indicate the language of Windows 10 (Russian, of course).

3. In the window with the "Install" button, click on the "System Restore" link.

As a result, you will find yourself in the Windows 10 resuscitation environment, which allows you to return the operating system to a functional state using one of the following methods: using a rollback point, a full system reset, restoring the registry, checking the health of system files. Also, the user will have a fully functional command line.

All operating systems have unexpected failures. You can create a Windows 7 recovery disc yourself by writing the necessary files to a suitable storage medium. For this procedure, the user will need about 10 minutes of time.

Restoring Windows 10 from Control Panel

The latest version of the operating system has many flaws and sometimes after the update it may not start for some users. The solution to this problem was provided by Microsoft and the Windows 10 recovery disc can be made from the Control Panel.

If the creation of a Windows 10 recovery disk does not occur on your own computer, then you must definitely find out the bit depth of the broken and temporarily used Windows, they must be the same.

Instructions on the question: how create a Windows 10 recovery drive:

After the program finishes, the flash drive can be used to restore Windows 10 and install it. Sometimes creating media using this method fails, in these cases you need to create the rescue disk using other methods.

Some users may need to create a Windows 8 recovery disc. This can be done in the same way as described above.

Reinstall Windows 10 with the official app

The Microsoft website suggests using a separate application to create a bootable USB drive.

After these steps, you can use the USB flash drive to install or reset the system.

Windows installation flash drive from the system image

To restore Windows 10 from a system image, you must first create this file. This can be done through the built-in application. To open it, go to " Control Panel» → « All Control Panel Items» → «» → « System image backup».

In the next window, select the section " System imaging».

In the window that appears, you need to select the medium to which the image will be saved.

It is advisable to create a separate disk partition to store this data, as you will need it to restore Windows 10 from an image. If you do not have a flash drive at hand, you can reset the system settings from the created file on your hard drive.

After the end of the data backup, the user will be prompted to create a system recovery disk. Thanks to this, in the event of an unexpected error in the system, you can restore all the data that was on the archived disk.

Installation USB drive for Windows via UltraISO

First, you need to download the ISO file of the desired OS version from the Internet. Also, to create a recovery disk for Windows 7, just like other versions, the user will need a program or its analogues ( Rufus, Wintobootik etc.) that can write system images to a USB drive.

To restore Windows 7 through an ISO image, you need to do all the exact same steps, but at the stage of choosing an image file for recording, you need to use the image of the seven or other OS versions. The same method is suitable if you are wondering how to restore Windows XP or another version of this OS.

Creating an installation disc

If for some reason a laptop or PC does not want to perceive a bootable USB flash drive, for example, on very old devices or if the USB ports are malfunctioning, then in these cases you can use a DVD-R or DVD-RW disc.

Due to the fact that the volume of disc media is limited, you need to find an image up to 4.7 GB (capacity for DVD-R and DVD-RW). Such files contain only a basic assembly without additional data and applications. Official images of all Windows operating systems occupy a volume of 2-3 GB. But amateur versions have a basic set of demanded programs and improvements, so they can take several times more.

How to make an installation disc

This requires a drive, DVD and UltraISO. The program can be replaced with another one that can write information to disk.

Now you need to wait until the end of the transfer of information to the optical disc.

Multiboot flash drive

Such a multifunctional device is essential for computer masters. It is much more convenient to restore Windows XP, Vista, 7, 8, 10 and other versions from one universal flash drive. This solution is called a multi-boot device. To create it you need a program WinSetupFromUSB... It uses a minimalistic boot loader that allows the boot disk to be used with multiple system images at once.

First you need to download WinSetupFromUSB and ISO images of the desired systems. After starting the program, a window with settings appears in front of the user.

It needs:

Select the drive to be installed on.
Check the box “ Auto format it with FBinst". This allows you to format the media to the desired format before starting the installation.
Check FAT32 format. Please note that this file system does not recognize images larger than 4 GB in size. When installing NTFS, some computers will not be able to see the USB flash drive and it will not work.
Select the type of operating system to be installed by ticking.
In Explorer, assign the system image file.
Press the button " GO»And confirm actions in new warning windows.

After that, the process of installing files to the specified media will begin. The details of the installation can be viewed by checking the “” box.

After completing the installation of one system image, you can immediately proceed to mount the next OS. Now you can restore Windows XP and other versions of the operating system using a single USB flash drive or a separate hard drive.

When recording the second OS distribution kit, you need to uncheck the " Auto format it with FBinst". Otherwise, the previously recorded system will be deleted from the drive.

In addition to the Windows installation version, you can load Linux distributions and many useful programs like Acronis, antivirus, and backup loaders in a similar way. To do this, you must first download the necessary ISO files and, when installing on the drive in the WinSetupForUSB program, select the item “ Linux ISO / Other Grub4dos compatible ISO»

After the installation is complete, immediately check the functionality of the programs on the USB flash drive by ticking the “ Test in QEMU».

For the drive to be recognized by the computer, it must be inserted into a USB 2.0 connected directly to the motherboard.

When launched in BIOS, a minimalistic GRUB4DOS window will appear in front of the user, in which you need to select the operating system or the installed program with the keys.

To create a multiboot flash drive, they also use the program MultiBoot... It includes the Grub4Dos installer, formatter and WinSetupUSB. The only difference from the previous creation method is a more beautiful graphical menu when starting the media and already built-in recovery programs, Acronis, etc.

How to start an installation flash drive or disk

After creating a Windows 7 recovery disc on a laptop or PC, you need to launch it. To do this, insert the storage medium into the device. Then turn off your computer.

To restore the system, you must first configure the BIOS of the device so that it can start a USB flash drive or disk. To do this, in the first 2 seconds after turning on the computer, you need to press a certain key. It differs from manufacturer to manufacturer. You can read more about this in the instructions for the device. Approximate use of keys to enter BIOS on different branded devices:

Acer, Lenovo, Asus, Sony - F2 or Ctrl + Alt + Esc
HP - F10
Samsung - Del
dell devices - F1 or Del

To boot the BIOS on the first try, press the desired key 3-5 times. After that, a blue menu with items in English will appear on the screen. On personal computers, the BIOS may look more attractive.

To boot from the installation disk, you need to go to the section " Boot " and change the boot priority there (" Boot Device Prority "). In the same section, you need to find a previously made USB flash drive or disc with recovery files and move the media to the first boot position using the F5 and F6 keys.

After that, you need to find the section " UEFI Boot Support" or " Boot Mode " and set Enabled or UEFI Boot there.

After these settings, you need to go to the section " Exit"And select the item" Exit & Save Changes».

The installation version of Windows will start loading from the disk. Depending on the OS version, the boot menu may look different.

With the help of a recovery disk, you can perform not only a full reinstallation, but also partial repair of damaged files via the command line, or restore damaged boot files.

Select the desired recovery method in the program menu and wait for the utility to finish. The main thing is that the device does not turn off during recovery, it is better to connect it to the network. Failure to do so may result in a malfunction during recovery and a hard disk error. A similar problem will have to be solved by physically repairing the device.

System reset on laptops

For system recovery on laptops, a built-in OS reset is provided. To recover Windows 7 without a disk, you need to run the standard recovery tool on your laptop.

To do this, after starting the device, hold down the power button or a specific key combination for 5-10 seconds. Further, to restore the system using the built-in program, select the desired item in the menu that appears and wait for the program to finish.

The laptop will recover Windows XP if it was originally installed on it. This will also happen with all other OS versions. If at the time of purchase there was an old version of the operating system, then it will be restored.

There are many different ways to restore your system after a breakdown or infection. The easiest method is to completely reinstall the OS using an installation disk, which is created in 10 minutes and then can be used on any device to fix them.