Detailed instructions for working with the allsubmitter program. Allsubmitter Technical FAQ (common problems and solutions)

Program for website promotion Allsubmitter 4.7

Have you created your website or blog? Good. It's time to attract visitors to your web resource. And so ... Rushed ... We fall asleep the entire Internet messaging with its links to blogs, forums, guestbooks, etc. And the long road began to increase the credibility of the site, but interesting - you can read a lot of good useful posts :). Especially useful is raising tIC andPRregistering your site in white directories (these are directories (sites) that allow you to put direct links to your resource and does not require a backlink ).

Many people used (including myself) the “artisanal” method of registering in directories: we are preparing a file that contains the name, description, link of your site, e-mail, keywords. And we begin to surf the Internet in search of treasure - white directories... When found, copy information from a previously prepared file and fill out the directory fields.

Oh, very long story ....

Appreciate your time? Then you will be interested! There is a program that can do all this chore for you! Name to herAllsubmitter.

Before you start talking about it, it is worth mentioning that it is this program that most optimizers use, which promote and promote your sites for money.

Allsubmitter- The most necessary tool for promotion. What is so interesting about her?

This program has Auto and Semi-automatic modes of registration in directories.

Auto mode - the program will independently register your site with your description in the specified directories.

Semi-automatic mode - the program independently fills in all the necessary fields in the directories, and you just have to check them and confirm the registration.

The second option is necessary for complex registrations in which special control is needed. Or for people who like to do everything themselves

To start working with the program you need 2 things:

– Description of your site;

– Base of white catalogs.

For further automatic registrations you need to submit your website for the program, namely: in " project manager»Create a new one - for your site, in which to fill in all the specified fields: name,e - mail , description, keywords, category, etc.

After that, we import the white catalog database into the program, select your project, start automatic registration and go to the kitchen to drink tea, whileAllsubmitter does everything for you.

Now go to "Directories - Directory Base". There is already a list of categories. Create a new one: “Click p.k. mice - add a category - enter the name –Ok »
In the toolbox Export Import press "Import from * .asd4» and select the database I downloaded.
Next step - check in.

Semi-automatic registration

In order to start work, select in the main menu:
Utilities - Registration - Semi-Automatic Registration
In the window that appears, select one of your projects (sites) - double click on it.
A new window with 10 tabs appears. This is a browser window, above the tabs there is drop-down menu. Push down arrow - put a check mark next to the newly created base and double click on it.
All is ready! Now click "Start Registration".
If you entered everything correctly in the project, the fields on the page will be filled in! One thing that may not be automatically detected is categoryto which your site belongs and, accordingly, captcha(picture with insidious letters and numbers).

When everything is full - register the site in the directory. If this operation went without errors, then press the button "Successfully" and proceed to register in the following directory. On average, if everything is well filled, then it takes 1-5 seconds.

Automatic registration

"I will be short" (c) Putin
1. Utilities - Registration - Automatic registration;
2. Select the desired project;
3. Select a directory database for automatic registration;
4. Click "Exact match" or “Inaccurate coincidence” depending on what category selection accuracy you want.

For example: if you indicate that the site should be registered in the category "Finance" and mode selected "Exact match"then when "Business and Finance" program not will allow this option to the next step, while “Inaccurate coincidence” Approve for further automatic registration.
5. All directories that were not automatically detected can add manually:

Select the desired directory in left column;
-Select a category with drop down menu;
-Press the green arrow button to the right;
-And so continue to the end of the list.

6. Click To register. And go drink tea in the kitchen (if you have added several thousand catalogs - at the same time eat);
7. Go to the tab “Waiting for captcha to be entered” and rewrite the characters from the pictures in the appropriate fields (if there are such images);
8. Go to the tab "Registration Result" and in the semi-automatic registration mode, we fix the failed registrations on the tab "Later";
9. Tab "Poorly" basically rubbish (this statement is true if RIGHT filled ALLfields in a flow project) When you select and delete them - they automatically fall into black list and next time, if desired, they will automatically filtered out.

Interested in website promotion? Be sure to subscribe to my new overview newsletter "SEO: Hand on the Pulse" once a month you will receive all the best, the latest and most interesting, that appeared on the network on this topic. Tested and reviewed. Including a lot of free, discounts, promo codes!

Grouped Frequently Asked Questions by Application

1. General issues
   

   1.4. The program writes the error "no communication with the database"

2. Project creation
   

   2.1. Why are additional fields needed? What to write in them?

3. Work with the base
   

   3.1. How to install TOP Database update

   3.3. How to find out how many directories with cars, how many with smart registration

   3.4. How to use the database search

   3.5. How to filter and select a database according to your defined, necessary parameters

   3.6. How to simultaneously change a parameter on all sites at once massively throughout the entire database or to the desired part of the database?

   3.7. How to build your own base?

4. Registration and reports
   

   4.1. I try during registration to select the necessary categories of the database, it doesn’t work - they are not selected. And the checkmark is not removed from the previously selected

   4.2. He writes - “there are no more sites to register”

   4.3. How can I add or edit information in the project during the semi-automatic registration?

   4.4. How do I save reporting on current registration with Allsubmitter? How to turn off the program and the computer?

   4.5. During semi-automatic registration in the form of a site, not a single field is filled. What to do?

   4.6. In the course of semi-automatic registration, a page of the site without any forms was opened

   4.7. How do I know how many sites I have left to register?

   4.8. What should I do if, during semi-automatic registration, some directories are quickly registered themselves, without my participation, I do not have time to check and click on the button?

   4.9. Work with captcha

   4.10. Problems with WISIWYG editor (visual text editor) and javascript forms

5. Decoding of some terms, functions, menu items of the Allsubmitter program
6. P.S. where to write with questions that are not mentioned here

   1. General questions:

   1.1. What happens if my computer or Windows "flies"? What will happen to the Allsubmitter and the key?

   First try to install the program and activate on a new computer. If, when installing on a new computer, after what happened with the previous one, Allsubmitter is not activated with the same key, then you need to write to the support service at http://www.webloganalyzer.biz/helpdesk.

   First, it is mandatory to register there again (despite the fact that you were already registered on the site during the purchase) and specifically and accurately state the problem and that you need to untie the key from the old computer.

   And be sure to include all your data - login, e-mail, which were used when buying, and the key itselfto untie.

   Communicate only in the support system - do not respond to email notifications about a response in the system.

   1.2. I want to reinstall Allsubmitter on another computer

   Not more than 1 time per month, it is possible to independently transfer the program, if desired, from one computer to another.

   After that, install the program on a second computer, activate it with the same, the same key and import your databases and projects again. If for some reason the program is still not activated, see paragraph 1.1.

   1.3. How to update Allsubmitter to the new version?

   When you purchase exactly 1 year, you are provided with a free program update.When the developers release the update, the program itself at startup will offer you to download it. Or, if you have canceled notifications or want to do it yourself, go to http://www.webloganalyzer.biz/eng/download.html

   In order to update Allsubmitter, download it and run the installation, installing it in the same folder as the previous version. Activate with the same key.

   If a year has passed unnoticed by you and when installing the new version of Allsubmitter, it will not be activated, and you don’t have the desire or the opportunity to extend the update right now, write to me, I will help, I will give the previous version of the program!

   1.4. Writes the error "No connection to the database"

   If you have such an error, go to the "Settings" - "Program Settings" menu section and manually specify the path to the alsubmitter.fdb file there.

   I have a default database path like this:

   C: \\ Users \\ Public \\ Documents \\ AllSubmitter \\ db \\ allsubmitter.fdb

   
   

   1.5. Use the keyboard shortcuts!

   You can view them, as well as assign and reassign your own in the "Settings" - "Shortcuts" menu. They significantly speed up the work.

   

   2. Creating a project:

   2.1. Why do we need "additional fields" in the last tab when creating a project? What to write in them?

   This question is discussed in sufficient detail in (see the file in the instructions and recommendations from the TOP Database).

   Additional fields are needed for any information that you may need to enter in the form fields during registration, but in Allsubmitter there are no standard fields.

   It can be:

   2.2. What is the principle of writing keywords in the "keywords" field

   This field requires you to directories of sites, in order to then issue your site when someone is looking for them in the search. Because the directories are all different, then the principles and search algorithms are different and it’s impossible to give any exact recommendation. It is impossible to say exactly about this field, it is better to write in the singular or plural, to use declensions, to repeat the main keyword in phrases, etc. - All directories have their own algorithms.

   Therefore, there are often different requirements for this field - somewhere they require a space, somewhere separated by a comma, somewhere 3 words, somewhere up to 500 characters. Most often this is a comma separated, up to 250 characters.

   Therefore, this field is not so important, but you should not neglect it.

   Here you need to write those words that people can drive into a directory search.

   These should be the enlarged words of your industry, their various synonymsthat are not necessarily found on your site (these are not META-keywords on your site where only those words that appear on your page are needed).

   Those. (for example) do not buy an asus laptop, asus laptop dealer in Moscow
   a computer, laptop, asus, asus, computer equipment, etc.

   2.3. What is the difference between “Generate” and “Generate 2” in the “Value Generator”

   Generation mode 2 is almost completely similar to the generation mode, there is only one difference before generation, a form will appear in which you can specify the percentage of similarity and the size of the shingle.

   
   

   3. Work with the base:

   3.1. How to install TOP Database update

   There are 2 options for the Allsubmitter program, how to update the TOP Base (or any other base with categories)

   1. Delete the old database and put the new one from scratch, entirely, in one file with subcategories. (at the same time, you probably won’t have a history of registering past projects, because I supply you with my settings).

   2. To point only the necessary parts of the base from the archive “TOP Base divided into more than 800 subcategories”. Just what you did not have before

   Most often it’s more convenient to use option number 1- install a complete database from scratch in the form of a single file (which itself is imported with an extended structure). To do this, first remove the previous, previous version and install a new one.

   The second option to update the database - in parts. You take the category or subcategory of the database you need and put it either cleanly (but then the history of your registrations also probably will not be saved), to a place cleared from the old base, or to the same part of the base that was the same.

   In the second case, if you import from above onto an existing part of the database, corrected during your work, your settings will remain, but my new database can only add new resources to you, but it will not exclude from your database those that I cleaned in the new update.

   To add only new sites in this case (when updating only one part of the database) - i.e. those that were not in the previous given part of the database, and not all my entire part of the database from the update, do not forget to leave the checkboxes “Exclude duplication of domain”, “exclude duplication of links”.

   
   

   In general, unfortunately, the program does not provide for other options (perhaps for now), so decide for yourself what is better and more convenient for what can be done.

   NOW DETAILS HOW TO INSTALL A NEW BASE WITH THE MOST COMMON WAY, OPTION NO. 1 - AS A SINGLE ASD4 FILE:

   1. Removing the old database
   If you try to simply delete the entire database with subcategories at once, the program will swear at inability to delete a category with data.

   Data is the sites contained in the category.

   Thus,

   to delete the previous database you need:

   A. Delete all sites from the database.

   To do this, you need to "stand up" with the cursor on the main category containing all the subcategories - TOP Base or whatever you call it. Be sure to click the checkbox "Show with subcategories" (it’s located immediately under the “Categories” block).

   

   Go to the area with sites and press Ctrl + A or right-click on the menu - select "Select All", then right-click on the menu - "Delete" (that is, not on the Del button, which suggests deleting sites in black list, but simply in the menu with the right mouse click - “Delete”).

   Right-click on the category TOP Base and select "Delete with subcategories."

   

   2. Installing a new base

   Remove the first two checkmarks- “Exclude duplicate links” and “Exclude duplicate domains”

   Put a third checkmark below - "Import to the database using categories."

   
   

   3.2. How to backup data on projects and the database (to transfer, for example, to a home computer)

   The answer to the question "If I work with the same projects at home and in the office, what do I need to copy every time?"

   There are two options:

   1. You can backup the database allsubmitter.fdb, - in the “Settings” menu - “Backup”, and at work restore from backup.

   During restoration, all data of the old database is lost, so ALL information will be identical to the home one.

   

   2. You can in the "Project Manager" section in the left column in the "Export / Import" block, save the desired project to the archive - “Save the project to the archive”, and at work to restore - “Create the project from the archive”.

   

   3.3. How to find out how many directories with cars, how many with smart registration?

   This can be seen in the "Directory Base" section of the site list. Among the speakers there is a column “Automatic. reg. "

   
   

   Black check marks - sites where you can register on the machine
   Gray - smart registration (sites already completed at least once on a semiautomatic device and all or most of the forms are recognized)
   No checkmark - the site was not passed in the Allsubmitter program, i.e. "Zero"

   In this column, you can sort the entire database by this column by clicking on the column name - Automatic. reg. And then, with a group of sites with the desired type of checkboxes, do some other actions - either export only the necessary sites (with auto, smart or without registration), or transfer them to the created subcategory, etc.

   You can also see the number of sites with the necessary checkmarks.

   The number at the bottom of the “Automat. reg. " always shows the number of sites with black checkmarks (which, in principle, can be registered on the machine), i.e. it shows the number of sites for the machine always - regardless of whether these sites are highlighted or not.

   
   

   To quickly find out the number with gray or no checkmarks, you can select them and right-click and select "Export * .txt" from the menu

   It is not necessary to export the file; you can click the No button further. But in brackets you will immediately be shown the number of sites. This applies to any sample from the database by which you quickly need to know the quantity.

   
   

   Option number 2 for counting the number of necessary types of sites - the number of sites for auto, semi-automatic and without registration in the desired category.

   
   

   To do this, click on the small gray arrow to the right of the name of the column "Automatic Reg" and see the drop-down menu, where

   Blanks\u003d gray checkmarks (Smart registration is possible)
   True \u003d black checkmarks (automatic registration is possible)
   False\u003d no checkmarks (no registration was done)

   Just select the parameter you need and look at the number written in the lower left corner of the base field.

   Once again about automatic registration

   I wrote many times everywhere that I am against automatic registration, because for a number of reasons, it is practically ineffective compared to semi-automatic and in bulk it only harms the site, usually the damage is irreparable.

   Therefore, if your site is expensive, if you have plans for the future related to this site, I recommend that you use a semiautomatic device, for which, in principle, absolutely all sites from the database are suitable.

   3.4. How to use database search?

   For this, there are so-called filters.

   To quickly search through any of the fields:

   1) if you know its exact meaning (for example, the value 4 for Page Rank), enter it - i.e. number 4 in an empty line under the name of the columns.

   
   

   2) if you do not know the exact value soughtenter part of it between% characters

   Those. like so, for example you can find the site you need in the database by domain. Because If you don’t know its full name in the database (after all, there is usually an add page), you need to type in the part you know (the domain name or its part) between% - in an empty line under the column name Url

   for example% catalog% - all sites containing "catalog"
   or% .ua% - all domain.ua sites
   or% mail.ru% - a specific site mal.ru or sites containing mail.ru in its name, for example, mymail.ru may drop out

   Or you can type something in the Title column:

   % error%
   % urgent%
   % ccount%

   Etc. and see all the sites where words with these parts are found, for example, such as "Error 404", "hosting has expired", "Account suspended", etc. - i.e. those to be blacklisted.

   And if you saved (did not remove) a checkmark, for example, on the value Blanks in the “Automatic. reg ”by clicking on the gray triangle next to it) (directories for smart-registration), then leaving this checkmark and entering% catalog% under the URL field will give you this result (see screenshot below).

   These will be all sites from this category of the database, including catalog in their address and allowing smart-registration.

   To cancel the filter, click the cross in the lower left corner of the window.

   
   

   3.5. How to filter and sample the database according to its specific, necessary parameters.

   Need promotion only on Yandex? Or just under Google?
   Need a super high-quality selection of sites according to your criteria?
   Little time or limited in quality material (few well-reproduced articles or descriptions) and want to start with the best sites?

   There are 2 options.

   Option 1. Make your own permanent selection from the desired part of the database - in a new subcategory.

   First you need to drive the right piece of the database to the parameters you need.

   Then “play with the filter”, choose the one that suits you best in terms of parameters and the number of sites in the sample.

   How it's done:

   In the "Databases" section, "get up" to the desired category (so that there is a checkmark with subcategories), select all sites, select “define parameters” in the left column, select there those parameters that you need to determine for this group of sites from the database - Yandex ban, Google ban, tits and Page Rank domain, HTTP code (error code), domain age, Alexa Rank, Yandex Catalog, DMOZ catalog, Yandex theme , Yandex region, etc.

   The choice of parameters for verification depends only on your final goals.

   

   I will not apply the decryption of the parameters here, see the link:

   Then sort the sites in the column of the desired parameter, select the necessary. There is a pretty intuitive filtering system. Located above the list of sites in the "Directory Base" section.

   To add a condition - click the Button on the panel - Plus Sign.

   To filter by the newly selected or deleted parameters - Button with a funnel next to the plus.

   
   

   Using the filter by parameters in the "Directory Base" section

   The only thing, I noticed that the Allsubmitter does not very correctly determine some values, for example, TCI. And yet, it’s better to run it 2 times - at least it doesn’t issue the correct HTTP code for a small part of the sites being run for parameters either the first time.

   And also keep in mind that the database mainly contains links to pages with the form of adding, rather than the main pages of sites, so Page Rank should be set in the parameters of the domain (main).

   Still, with a large number of parameters immediately and checking a large volume base, Allsubmitter can freeze or “crash”. If you encounter this problem, try fewer options and fewer parts of the database.

   Option 2. Quick filtering during the semi-automatic registration process (for sites previously checked for parameters).

   You can select the necessary part of the database - for example, Site Directories - White, start semi-automatic registration and quickly choose only the sites with the necessary parameters for the first registration - for example, Tits is greater than or equal to 10 (without transferring them to the database in separate subcategories).

   This is done in a hidden menu bar on the left during semi-automatic registration:

   

   How to open a hidden panel with sites from the current database during semi-automatic registration

   Move the menu bar

   Specify a quick filter in the desired column (for example, TCI) - for example,% 10%

   A more advanced filter setting appears below - you can click the "Configure" button and select various values \u200b\u200b- from and to, equally and more, etc.

   

   3.6. How to simultaneously change a parameter in all sites at once massively throughout the entire database or to the desired part of the database?

   For example, if you need to put the same, your comment, or your value in the “Successful registration string” or “Link type” field, etc. in several sites.

   Select the part of the database you need, right-click on the selected sites - select "Edit".

   
   

   Appears group Editing window.

   After that, all selected sites will have this particular comment. He will overwrite everything that came before him. Therefore, handle this field carefully; rollback to past values \u200b\u200bis impossible.

   
   

   3.6. How to build your own base?

   I specifically regularly send you updates in 2 versions in asd4 format (except txt format):

   1) In the form of ONE file, which is imported to the place of the remote base system and is also lined up in all categories. In this case, you lose your some settings - remote sites, settings on the passed sites. But you get a cleaned and updated version of the database.

   2) In the form of more than 800 files - i.e. All categories and subcategories removed separately. So, if it’s more convenient for you, if, for example, you carefully assemble your own database for some types of sites or topics, and you definitely need to save your own settings for your database, then you can import my database in parts.

   When importing a piece of my database, you can leave the checkboxes “Exclude duplicate links” and “Exclude duplicate domains” and then only that part of my database is imported that was not in your and my previous one.

   You can create your own base, or by doing parsing using the SE Wizard in the "Databases" section.

   In the official instructions of Allsubmitter there is an item "Creating a database", it is briefly written about it.

   6.2. Write to me - Yashchenko Anna, author of the TOP Base

   If you still have questions about the program, you can first ask a question to me, by contacts:

   ICQ: 398180232
   Skype: topbase.ru
   Email:

   I can also, for example, help you with the restoration of the key to your mail or renewing the key for the next year.

   But, if I don’t know the answer to the question, if the question is technical, in your individual case with the program, then please write to the Allsubmitter support. When you purchase, you are entitled to 1 year of free support.

   6.3. To support Allsubmitter

   To do this, you need to go to the "Support" section on the Allsubmitter website - here is a link to this section http://www.webloganalyzer.biz/helpdesk, register if you have not talked to support in this section. This is the second registration after registration on the site itself upon purchase. Registration is very simple and instant, does not require confirmation by e-mail.

   Then you need to log in, click Ask a Question and ask your question in Russian.
   

   Ask questions immediately in detail:

   With the indication of your username and email that were registered at the time of purchase
   describing your problem and your attempts to solve it
   with attached screenshots, if needed.

   All this will significantly reduce the time of correspondence!

   You need to answer only in this support system. Do not reply to emails that come to the mail with notification notifications!

   Replies from support usually always come within 24 hours.

   

To the question PEOPLE !! ! GIVE THE LINK WHERE YOU CAN DOWNLOAD THE WORKING ALLSUBMITTER + key specified by the author Joseph Stalin the best answer is Allsubmitter 4.7 with auto-registration
AllSubmitter 4.7 is a professional program for website promotion and promotion. The program automatically and semi-automatically registers your site with high quality Internet information resources (search engines, catalogs, ratings, message boards, shareware sites, news resources, link exchange).
Semi-automatic mode:
When using Allsubmitter 4.7, the quality of registration is not that not lower - even higher than when manually entering information about your site in the database. If only because the possibility of a "human" error is in most cases prevented by the program, and the program itself, in turn, does not have to "make decisions" in areas where only a person is competent. The program provides a multi-window, modernized, browser (based on Internet Explorer), where you have full control over the registration process, as with normal manual registration. But filling in all fields (including rubrics) is done with one click of the mouse.
Auto mode:
AllSubmitter also contains a module for automatic registration. With a unique opportunity, almost instantly replenishment and correction of inoperative databases for automatic registration. Thus, you will always have up-to-date bases for automatic registration. The Allsubmitter 4.7 + program allows you to create, almost instantly, your own database of sites for registration, filter out inefficient sites from the point of view of search engines.
Semi-automatic mode is always much better than automatic mode, so I advise you not to always use a car. Each site owner is interested in a large search for links. The site was created to help Internet users successfully receive information and take useful programs. A big request to treat my creation with respect is almost the first experience in creating web pages. If you didn’t find something you need, come in, maybe I'll post it later.
Many professional optimizers have opted for the program. The program contains artificial intelligence for filling out the registration forms on which you register for the first time, and whose field names are not yet known to the program. The databases contain many systems into which you can add a site. The program registers in all sites without exception. The opportunity to replenish the database. Ability to work with many directories at once. There is a rating review (including competitors) in relation to search engines PR Google and IC Yandex.
Finding new external links is not an easy task, therefore programs for automatic registration and promotion play a very important role in this not simple matter today. With the help of downloaded products, you will get the opportunity to manage the process yourself without resorting to the help of various expensive services. Very high-quality and controlled registration in Internet information resources (search engines, catalogs, ratings, bulletin boards, news resources, link exchange, etc.) Registration, with 100% quality in any Internet resources.
Now, with the help of this program, you can easily find out the Citation Index, Page-rang and other equally important parameters of your site, see the position of the site, you can say in all search engines, and determine your competitors. The highest quality, fastest and most controlled registration in any Internet information resources (search engines, catalogs, ratings, message boards, shareware sites, news resources, link exchange, etc.) - I want to get a lot from auto-registration. When using AllSubmitter, the quality of registration is higher than when manually entering information about your site in the database, because the possibility of a manually entered error is, in most cases, prevented by the program, and the program, in turn, does not have to make decisions in the area where it is competent leash

Allsubmitter - This is a program for promoting sites in search engines (Yandex, Google and others). The program allows you to add your site to a huge number of directories, forums and blogs. As a result, all sorts of indicators and site traffic increase. Since not every beginner will understand the program, I have prepared a short instruction on creating a project and registering in catalogs.

Project creation

Run the Allsubmitter program and open the " Project Manager". In the project window, click on the button " Create new project"(In the block" Actions"). Next, fill in the following fields:

• Name - any
• Customer and Executor - click on the add button and enter: name, email and website URL. If desired, add the rest of the data (last name, icq, phone, fax and comment).

Go to the tab " Description"And fill in:

• URL (registration) - the address of your site
• Name - full site name
• Description - make an accurate description of the site (from 250 to 700 characters)
• Short description - a couple of short sentences (from 60 to 150 characters)
• Keywords (comma separator) - words describing the site

• Keywords (space separator) - words describing the site
• Site language - “RUS” or “Russian”
• Company - you can write the site address (without www and without /)

Go to the tab " Contact Information"And fill in:

• Name - any
• Surname - any (optional)
• Country - for example, Russia
• Town - for example, St. Petersburg
• State - (not necessary)
• Address - (not necessary)
• Postcode - any (optional)
• Telephone - any (optional)

• Fax - (not necessary)
• Email- indicate your mail (not primary), to which letters with confirmation of registrations will come
• Login - unusual login (to be free)
• Password - any English letters and numbers
• Username - you can enter the same as login
• Trackback Page - it’s better not to create such a page
• List of categories, exact match (separated by commas) - indicate as many different categories as possible (suitable for the theme of the site)
• The list of categories in which you want to register your site (separated by commas) - again, as much as possible
• Words that should not be in the category name (separated by commas) - for example, sales categories or categories for sites with erotic content

Directory Base

We return to the start window of the program and open the section " Directory Base". Then, on the left in the block " Export Import»Select the import database directory into the program. Several options are offered: from a txt file, from an asd4 file, from an aidataxml file. What base do you have, choose this option.

In the parameters for adding a database, install:

• Exclude duplicate links - uncheck
• Exclude duplicate domains - uncheck
• Do not add from the black list - tick
• Import to the database using categories - tick
• If a duplicate with a car, but without in the database, replace - tick
• If a duplicate with a car is always replaced - uncheck

After a few minutes, sites will be added to the common database. You can view the full list in the " Categories«.

Registration in catalogs

Everything is ready for registration in catalogs. In the start window of the program, select the section " Automatic registration". In the list of projects, select the previously created site.

Selected sites will be displayed on the left, click on the “ Not an exact match". So we will select the appropriate sites and weed out the unnecessary.

Set the number of registration flows (for example, 300) and click on the “ To register«.

Catalog registration begins. Some directories require captcha input (characters from the image), the program will try to automatically recognize it. But this function does not always work correctly, in which case it is necessary to enter captcha manually (on the “ Awaiting captcha input«).

Successful registrations can be viewed on the tab " Registration Result«.