It sounds paradoxical, but a router is a type of device that manufacturers rarely equip with a power button. No wonder, because today routers are practically not turned off, and, therefore, they are not rebooted by their users.
By the way, that the routers are not endowed with a special, previously stipulated key, we can take as an example a router from Asus with the model name RT-N13U-B1.
It would seem, and really, why include a feature in the equipment functionality that no one will use, however, not everything is so smooth. Sometimes, users are faced with such network problems as freezing of Internet resources, including various web pages.
In this case, as a rule, restarting the router should have a favorable effect on the problem that has appeared, followed by its elimination. Usually, these difficulties arise for owners and users of low-cost routers.
Difficulties in the first place can be associated with various malfunctions of your router, so rebooting it is designed to reset all violations in the operation of the device.
In this article, we will consider how to restart a wi-fi router, including remotely.
Method number 1: the most simple restart of the router
So the first way to reboot devices is the most simple. To implement it, your device must be equipped with a "Power" button. On many ADSL modems this button is named "On / Off". As a rule, such a button has a convex shape, pleasant to the touch and it will not be difficult to find it.
The first press with the device turned on earlier will disconnect it from the power supply, and the second press will restart its operation. Some manufacturers on their official websites indicate information that after turning off and before turning on the router, you must wait from 20 to 30 seconds.
However, this expectation is unlikely to have any unambiguous explanation. In any case, it is the manufacturer who knows his product and its structure best.
Most router manufacturers believe that the equipment used to access the Internet is intended for permanent work activities, and that is why they do not install such an important power button.
If your router belongs to those not endowed with a power key, then answering the question of how to reboot a wifi router, you should find a wire through which the router receives the necessary electrical energy, and then find its power supply and unplug it, if possible , also for 20-30 seconds. The method is quite ordinary, however it has one drawback.
The disadvantage is that on a considerable number of devices, having carried out its configuration, it is necessary to forcibly save it. If these actions are not implemented, then after turning on the device again, the user risks getting an unconfigured device, which should be reconnected to the network.
For example, dropping settings is detected on:
- Tp-Link TL-WR741ND;
- TP-LINK TL-WR1045ND;
- TP-LINK TL-WR841N.
Method number 2: we reboot the device remotely
From the point of view of the router hardware, this method is the most optimal reboot option. It should also be borne in mind that this method will take the user much more time than the previous one, but it is worth it. The method is also effective and relevant because it is the only one in the case when the user does not have direct access to the router (to the shutdown button or to the outlet). Having answered the question of how to reboot the router remotely, you can read the second and third reboot methods.
To start implementing a reboot, you should enter the parameters of the router by entering the web interface of its settings. This is done by writing the standard address 192.168.1.1 in the browser search bar. After entering the specified address, press the "Enter" button, which is located on your keyboard.
Usually, manufacturers place the reset button directly on the main page of the web interface of the router's parameters, such manufacturers include:
- Asus;
- D-Link;
- Zyxel and others.
Some, however, include the reboot function in a specific section. On TP-Link, enter the "System Tools" section, on NETGEAR, enter the "Router State".
Method number 3: reboot via protocol
You can also reboot the router through a special protocol called telnet... Enter "telnet (desired IP address)" through the search engine. Next, the user must go through authorization, for this he must enter a username and password. After this action, in the window that appears, enter "Restart". Done, your router is now rebooted.
Thus, in this article we have covered quite extensively how to reboot a tp link router, asus, d-link and others.
Over the past few months, the site has published several articles in which I talked about routers. In particular, I talked about and. Today we will analyze a slightly less relevant, but still important question - I will talk about how to reboot the router.
What is it for? There may be several reasons. For example, a router tends to freeze, which is often associated not with the device itself, but with its firmware. The router can cut speed, disconnect and automatically not connect to the network, etc.
Traditionally, let me remind you that this FAQ applies to any models of routers, be it D-Link, ASUS, TP-Link, Zyxel, etc.
Quick reboot
Of course, you should start with the easiest way. On the back of the device, you can find a special on / off button for the router (POWER). As a rule, it can be found only on expensive devices, on inexpensive ones it is rarely or not found at all. So, with its help, you can instantly reboot.
If the button is missing, don't worry. You can see the Reset button recessed into the case. In general, it is necessary for a complete reset of the settings, but with its help you can also reboot. To do this, take something sharp (a ballpoint pen is ideal), press the button and hold it for no more than one or two seconds. If you hold it down longer, then simply reset all settings, which is fraught with the lack of the Internet and installing new settings. Be careful with this method, it is very tricky. And in general, I advise them to use only in extreme cases.
Finally, if all else fails, then simply unplug the router adapter for 10 seconds. Then put it back in and the device will automatically connect after a while. It is recommended to use this method as little as possible, as it is alleged that it can adversely affect the lifespan of the router.
Reboot via interface
You can reboot the router using the web interface. The method is not the most convenient, but reliable.
First of all, you must get to the device interface by entering a specific address in the browser address bar (usually 192.168.0.1 or 192.168.1.1 - the exact address can be found from).
After you get into the router settings panel, you will need to find the virtual restart button. It all depends not so much on the model of your router as on its firmware. Somewhere there is a separate button for restarting, somewhere it is hidden in the menu. For example, in some D-Link firmware it looks like this:
Accordingly, just click on "Restart" and wait a few seconds for the device to reboot. Then exit the settings using the "Exit" button.
Reboot using the command line
The device can also be rebooted using the Telnet command line. Telnet is a text-based program, essentially the same one with which you can remotely connect to a computer. In order to reboot the router using it, it is necessary that the router supports this protocol.
So, start Telnet and write open ip-address of the router without quotes (for example, open 192.168.1.1). If you get a response like “Failed to connect to this node, on port such and such. Connection failure ”, you can forget about this undertaking, since the connection is impossible.
If the connection was successful, then you will need to go through authorization. To do this, write your username and password:
- admin your login
- admin your password
As you can see, there is nothing complicated in the procedure itself. Do not forget to ask questions and answer on the topic of the article.
In order to reboot the router, just click on the button behind the router or remove the power plug. You need to wait a certain time for all components to stop working. In a minute after disconnecting you can turn on the router with the button or insert the plug into the socket. Attentionthis kind of reboot is harmful to the wireless network, so don't click the button all the time! Do not be alarmed if the Internet is not available for the first 20-60 seconds, let the router recover. In a minute, access to the network should recover.
Soft restart
This method will be more correct for the operation of the router. This requires in the search bar write in 192.168.0.1 , or 192.168.1.1 ... In the opened site, enter your username and password " admin". Key reboots is in the section " System», « System settings”, The section names may differ depending on the router model. We will now look at how to reboot the network on different routers.
TP-Link
On this device, the restart button is hidden away in the side menu. Press to enter the reboot menu. System Toolsand select If you have an English version of the control panel, select the following options: System Tools — Reboot and button Reboot.
ZyXEL
If you are the owner of a Zixel router, restarting it will not be difficult for you. To do this, follow the steps listed below.
D-Link
In the D-Link control panel, find the “ System" and click “ Reload " or save and reload... To enter the control site, in the same way as in previous cases, type in the search bar IP the addressand log in with your login «
admin». 
Asus
Asus is among the top leaders in wireless network quality, but these devices can become unstable. To restart the router, you do not need to go through the settings, just click on the main control page then click again
Using Telnet
The last way to restart the network is through Telnet. This method is not suitable for beginners! To start a restart, you need to perform a number of actions:
- Download Telnet client
- Open the program in the client Putty
- We enter IP router and put a mark opposite telnet
- We confirm act
If you did everything according to our instructions, a window should open and the program itself will start working with the router. If the window does not appear, then an error has occurred, perhaps the router does not support this function. 
Often in such a complex technique as a router, there are some internal software errors. As a result, the device simply stops working normally - it does not "distribute" the Internet or simply does not allow you to connect to itself. This difficult situation can be resolved in various ways. One of the easiest is reboot.
Reboot options
Run RestartrouterD -LinkDIR 615 in two ways:
Program
For many not very experienced users, such a question as rebooting the D-Link DIR 615 router causes problems. This operation is extremely simple, it does not require any special skills or abilities from the person performing it.
The soft reset process is as follows:
After that, the router will automatically reboot. It should be remembered that if before that a setting was performed, entering any parameters, then they must be saved.
You can also do this in the "System" section by selecting the "Save and Restart" item - save and reboot. This operation will save all important data in volatile memory.
Video: configuring the router
Hardware
Manual reboot is required in case of emergency when, for some reason, it is not possible to use the web interface.
This operation can be done in two ways:
At the back of the DIR 615 case there is a “Power” button. With it, you can turn off the power supply to the device, even if the plug is inserted into a 220 (V) socket. After turning off the power, you need to press this button again. The device turns on. This restart method is the fastest.
Sometimes it happens that the entered settings led to a serious software error during the operation of the router. Moreover, these settings are saved in volatile memory and do not allow restarting by software, since it is not possible to enter the web interface. The manufacturer has foreseen a similar situation. It is for this case that there is a special reset button for standard parameters.
This operation requires a long, thin object. For example, an awl or a ballpoint pen rod.
When something like this is available, you should proceed as follows:
- take the device case in your hands and turn it over to the side where the LAN ports are located;
- find a button recessed into the plastic - press it and hold it for 10 seconds.
After performing this operation, the device will be rebooted. This method has one drawback - all previously entered settings will be erased.
Restarting the D-Link DIR 615 is simple enough. But it should be remembered that not all methods allow you to save the settings entered by the user.
Rebooting your router is the first thing to do if you experience network problems. Quite often, this simple action will be enough for everything to start working as it should. In this article, we will tell you how to reboot your TP-Link router.
Reboot the TP-Link router via the web interface
The softest and safest way to reboot any router is via the web interface. If you can enter the web interface, then try restarting the router in this way. Perhaps rebooting through the web interface will be enough to fix your problem.
In order to reboot the TP-Link router via the web interface, you need to open any browser and enter it into the address bar. For TP-Link routers, this is usually 192.168.1.1.
After entering the IP address, you will see a window with a request to enter the login and password to access the web interface. At this stage, just enter your username and password. If the login and password are correct, then the router's web interface will appear in front of you.
In the web interface, you need to open the drop-down menu "System Tools" and select the item "Reboot"
After that, a page with the router reboot function will open. Here you just need to click on the "Reboot" button.
After that, a pop-up window will appear asking you to confirm the reboot of the TP-Link router. Click on the "Ok" button and the router will start to reboot.
Reboot your TP-Link router using the on / off button
Another way to reboot your TP-Link router is to turn the device on and off using the On / Off button on the back of the device. Look at the back of your router. If there is a button labeled "On / Off", then you can use it to reboot the router. Just press this button to turn off the router, wait a few seconds and press it again to turn the router back on.
Unfortunately, this method is not always applicable. The fact is that the "On / Off" button is not present on all models of TP-Link routers. Therefore, do not be surprised if you cannot find such a button on your router.
It should also be noted that the button labeled "Reset" is not intended to reboot the router. This button is used to reset the settings or the so-called "Hard reset". Therefore, you should not try to reboot the router using this button.
How to restart the router if the "On / Off" button is missing
If the “On / Off” button is not on your TP-Link router, and rebooting via the web interface is not suitable for other reasons (for example, the router is frozen tight), then you can reboot the router simply by disconnecting it from the power supply. To do this, unplug it from the outlet for a few seconds, then plug it back in.
How to reboot a router via Telnet
There is also such a rather exotic way of rebooting, as rebooting via Telnet. This method is used only in specific situations, but it is impossible not to mention it. In order to reboot the router via Telnet, you need a Telnet client. For example, you can use a free Telnet client called.
Run Putty program on your computer. After launch, a window will appear for configuring Telnet connection. In this window, you need to enter the IP address of the router, select the Telnet connection method and click on the "Open" button.
After clicking on the "Open" button, a window with a text interface will appear on the screen. Using this window, you can manage your router via Telnet connection. The first thing to do is to enter a username and password to access the router.
After entering the username and password, the router can be rebooted to do this, simply execute the "reboot" command.
