How to clean the system completely. How to clean your computer of unnecessary files

If you no longer want to endure the "willfulness" of a cluttered system or you have some problems associated with the pre-sale preparation of your PC - relax! Reading promises to be exciting and at the same time incredibly useful in the final form of its manifestation (meaning the practical application of the information received). Here and now you will learn how to clean your computer completely. You will be given recommendations of an exclusively "total" nature. Since only a complex solution can qualitatively influence the outcome of your actions. However, let's go in order.

The inevitability of the prevention process

Sooner or later, the hard drive needs to undergo some "treatment". Since the information stored on the hard drive often has a chaotic filling structure. Not always a practical solution to the question: "How to clean the computer completely by completely formatting the disk space?" - the best acceptable option. As a rule, arrays of information stored in the depths of user machines are often of some value to their owners. However, to put things in order at the "digital warehouse", there is no need to subject the hard drive to a complete erasure process. It will be enough to run any software tool, the functionality of which allows you to defragment the disk.

Information mess

Let's not go deeply into technical terminology. Let's just touch on the surface of the operational moment of one of the most responsible for storing information in a modern computer's component - HDD. Because understanding the problem: "How to clean the computer completely?" will free your brain from some doubts about the advisability of carrying out a systematic defragmentation of the drive partitions.

The fact is that in the process of using the hard drive, the user constantly deletes something or transfers part of the data to another area of the disk space. The resulting "gaps" are filled with new files, the size of which may significantly exceed the freed space. Ultimately, "weighty" data undergoes a fragmentation process. As a result, the HDD mechanics have to "strain" a little, because of which the performance of the PC is significantly reduced - the effect of "braking" is obvious. It is for this reason that you should periodically defragment your disk. However, in order to achieve the most effective result in solving such problems (of a preventive type), something else should be done first ...

How to clean your computer completely: choosing an action plan

First of all, delete all unnecessary files. To do this, you can use standard Windows tools. However, specialized software, for example, Your Uninstaller, removes residual digital garbage from the system registry during the uninstallation process. Thus, there is a significant savings in disk space.

Effective tough measures

Let's say you need to thoroughly clean your hard drive. In this case, the erasure level should be high and reliable. Confidential information destroyed by the "several passes" method can hardly be recovered by conventional software. If you need a simple solution to the question: "How to completely clean the hard drive?" - use the second method.

Method one: irrevocable

You will need exclusively specialized software. Use the free CCleaner utility. After downloading from the web and software installation, run this functional software.

Activate the "Service" tab (a shortcut in the form of a chest on the left side of the workspace of the program).
Then go to "Erase Discs".
In the appropriate checkboxes, make an acceptable choice.
To confirm your actions - click "Erase".

Option two: how to clean your PC completely without uninstalling Windows

All the same CCleaner will help you to put things in order in all partitions of your HDD:

Activate the Cleaning tab (broom icon).
Check the required items.
Click the Analyze button.
Then click on "Cleanup".
Then go to the "Registry" tab.
Check all the boxes and click "Search for problems".
Then we press "Fix".

The third method of getting rid of digital "garbage": standard Windows toolkit

By using some of the various services built into the system, you will not only get a practical answer to your question: "How to completely clean your hard drive?", But also learn how to use the hidden potential of the OS.

Enter the Start Menu.
Go to the "Computer" tab.
Hover the cursor over the required section and right-click to bring up the context menu.
Select Properties from the drop-down list.
In the service window, which will appear immediately, you need to activate the "General" tab.
By clicking on the "Disk Cleanup" button, you need to mark the types of files that you want to delete.
Confirm your changes with the "OK" button.
Then, in the message window, click "Delete files".

Freeing up RAM resources

Not everyone knows how to clean up a computer's RAM. However, this "secret" will be revealed for you. Use the method that works best for you and optimize your PC.

Open Windows Notepad.
Write the command: FreeMem = Space (64000000).
Save the resulting record under the name "ram_cleaner.vbs" in the "txt" format.

If necessary, run the text file, which will clean up your PC's RAM.

Software solutions for system optimization and prevention

There is a lot of specialized software, the use of which will allow you to permanently get rid of the headache caused by the generated "garbage" in the system. It should be noted that some programs have incredibly broad functionality. For example, TuneUp Utilites 2014 independently monitors system performance and constantly optimizes the operating system. For a beginner, such a program is just a treasure. By the way, this software implements a special service, the work of which is the answer to the question frequently asked by users: "how to clear the computer's RAM." When there is no desire and time to understand thoroughly all the intricacies and nuances of PC maintenance, then this option is optimal.

Penultimate cleanup option: formatting the hard drive

When the user decides to resort to the process of reinstalling the Windows operating system, then it is worth using the presented method of cleaning the HDD. Before the OS distribution is installed on your hard drive, you can always format a particular area of the hard drive. This is perhaps one of the most radical ways to clean the drive from the information on it. However, if you had any difficulty in deciding how to format drive "C", then now you know what to do for this.

The final method of digital "disposal": the command line

To wipe data on disk space, you can use the following cleaning method:

Press the "Win" and "R" keys at the same time.
In the service line, enter: cmd, and then click OK.
In the command window, write: format (section identifier), then be sure to put a colon.

In the end, you should get the following: format c :, where "c" is the letter designation of the HDD partition, in this case - the system partition.

Before I finish

It would probably be unfair to keep silent about memory cards. Since the problem of "accumulation of digital garbage" today for flash media is no less relevant than for PC hard drives. It's no secret that miniature storage devices (flash drives) can have a pretty decent capacity rating. Therefore, the knowledge of how to format the memory card is also necessary for the user.

When you insert the above storage device into a special slot of the PC (card reader), the system assigns a certain alphabetic character to the embedded equipment.
With the marker on the memory card, right-click once. Select "Format" from the context menu.
The FAT32 file system is the most suitable for miniature storage devices. Therefore, it is necessary to format the memory card according to the recommended parameters.
Your flash drive will last a long time if you do not "spontaneously" remove the device from the PC without first agreeing with the OS the moment when the system should turn off the power supplied to the flash drive.

Finally

You should now be clear on how to clean your computer completely? Windows 8 you have installed or the seventh OS - it does not matter. All of the above examples are relevant and effective for literally all versions of Microsoft operating systems. You just have to apply the knowledge gained in practice in order to facilitate the work of your PC. Good luck and stable performance!

The inevitability of the prevention process

Information mess

How to clean your computer completely: choosing an action plan

Effective tough measures

Method one: irrevocable

You will need exclusively specialized software. Use the free CCleaner utility. After downloading from the web and software installation, run this functional software.

Activate the "Service" tab (a shortcut in the form of a chest on the left side of the workspace of the program).
Then go to "Erase Discs".
In the appropriate checkboxes, make an acceptable choice.
To confirm your actions - click "Erase".

Option two: how to clean your PC completely without uninstalling Windows

All the same CCleaner will help you to put things in order in all partitions of your HDD:

Activate the Cleaning tab (broom icon).
Check the required items.
Click the Analyze button.
Then click on "Cleanup".
Then go to the "Registry" tab.
Check all the boxes and click "Search for problems".
Then we press "Fix".

The third method of getting rid of digital "garbage": standard Windows toolkit

Enter the Start Menu.
Go to the "Computer" tab.
Hover the cursor over the required section and right-click to bring up the context menu.
Select Properties from the drop-down list.
In the service window, which will appear immediately, you need to activate the "General" tab.
By clicking on the "Disk Cleanup" button, you need to mark the types of files that you want to delete.
Confirm your changes with the "OK" button.
Then, in the message window, click "Delete files".

Freeing up RAM resources

Not everyone knows how to clean up a computer's RAM. However, this "secret" will be revealed for you. Use the method that works best for you and optimize your PC.

Open Windows Notepad.
Write the command: FreeMem = Space (64000000).
Save the resulting record under the name "ram_cleaner.vbs" in the "txt" format.

If necessary, run the text file, which will clean up your PC's RAM.

Software solutions for system optimization and prevention

Penultimate cleanup option: formatting the hard drive

The final method of digital "disposal": the command line

To wipe data on disk space, you can use the following cleaning method:

Press the "Win" and "R" keys at the same time.
In the service line, enter: cmd, and then click OK.
In the command window, write: format (section identifier), then be sure to put a colon.

In the end, you should get the following: format c :, where "c" is the letter designation of the HDD partition, in this case - the system partition.

Before I finish

When you insert the above storage device into a special slot of the PC (card reader), the system assigns a certain alphabetic character to the embedded equipment.
With the marker on the memory card, right-click once. Select "Format" from the context menu.
The FAT32 file system is the most suitable for miniature storage devices. Therefore, it is necessary to format the memory card according to the recommended parameters.
Your flash drive will last a long time if you do not "spontaneously" remove the device from the PC without first agreeing with the OS the moment when the system should turn off the power supplied to the flash drive.

Finally

In this article I will teach you how to clean your computer from garbage. I'm a blogger and I download a lot of stuff on my computer, install programs, test patches and the like. A lot of debris accumulates in the system, interfering with normal operation. I will consider several tricks on how to clean and speed up your computer with your own hands.

It is these four steps that will provide maximum speed and optimization. I asked my friends to advise the program, it turned out to be one nonsense, I started looking for it myself. Let's start by cleaning up the hard drive.

How to clean up junk from your computer: hard drive

I'll tell you how to clean your computer from garbage, follow all the steps in the article. Don't use the standard uninstaller, Revo Uninstaller will help. As for the garbage on the hard disk itself, we carry out it in two stages.

First stage: standard

Few people know that Windows has a standard utility for cleaning hard drives. To do this, open “my computer” and right-click on each of the local drives and select “properties”.

Find and click "clear".

And we agree with our decision.

The process will go through, after which quite a lot of space will be added to your disk. I am writing this article from a work computer, he is 2 weeks old, and over these two weeks, trash has accumulated for almost 6 GB.

Method two: by the program

A standard cleaner is good only for the system itself, so you need to clean the rest of the hard drive as well. For these purposes, I recommend the CCleaner program, here is its official site... There is nothing complicated to download for free. We open and see the program window in Russian.

We select the item "cleaning".
First, we do the analysis.
The entire list of unnecessary files will appear, click delete.

This completes the cleaning of the hard disk. I offer a list of alternatives for free.

Advanced Disk Cleaner
Blank and secure
Freespacer
HDD Cleaner
Moo0 Disk Cleaner

Cleaning your computer from garbage: the registry

Cleaning the computer from garbage in the registry, I use the Wise Registry Cleaner program, you can download it here, the program is completely free. Download and install. At the first start, they will ask about a backup copy of the registry, we make it. We choose deep cleaning to get rid of all the jambs, which is good, everything is completely in Russian.

Go to the optimization section.

The section itself.
We mark the checkboxes, I put everything.
Click Optimize.
After the program is running, the words "optimized" will appear.

The last section is compression of the registry, a cool thing. We must first conduct an analysis. The computer will not respond for some time, do not be afraid.

Now click on compress. The registry will start compressing, I advise you not to do anything at this time.

After compression, a reboot will take place, this is mandatory. The second step was taken, the registry was optimized, the free utility Wise Registry Cleaner helped. For an alternative, I offer more programs, you can download it for free and without registration.

Registry application for windows 7, 8 and 10

Auslogics Registry Cleaner.
Vit Registry Fix Free.
Reg Organizer - this program works fine for Windows 10 for free, I tested it.
Avira RegistryCleaner.

Cleaning the system volume information folder

A month ago, my computer started to boot very slowly for about 35 minutes. Thought it was the end of the hard drive, but nothing happened. The point was that the system volume information folder stores backup copies of restore points, and I had 253 GB of these points, and began to clean it. First you need to enable the visibility of hidden folders. We enter the control panel and find the folder parameters.

The path to the panel.
We expose large icons.
Click the folder options.
View tab.
Uncheck the box.
We change the check box.
Press ok.

This folder is now on drive C, but you cannot open it even if you have configured administrator rights. To clear, you need to go to drive C, and find system volume information, right-click and select properties.

To add an administrator to access, click add.

Enter your account and click ok.

All record is created, click ok.

During creation, there will be all sorts of warnings, we ignore them.

To clear the restore points, go to the control panel and look at the screenshot.

Path to the program.
In the left section, select "system protection".
Select drive C.
Click configure.

That was the problem, I had this slider set to 50%, so all the memory was full. I set it to 5 percent, let the dots be. To clear the memory, click delete.

At this point, the entire hard drive is clean of debris. Let's move on to the last step.

Defragment your hard drive: free windows 7, 8, 10

Let's start with the standard method, it works the same on all systems, including windows 8. Go to my computer and select the disk for defragmentation.

Defragmentation is the transfer and clustering of system files by type.

Right click.
Find properties.
Service tab and perform defragmentation.

In the next window, select the local disk. First, click on the analysis, how it goes, click on defragmentation. There are analogues of the standard program, I will not disassemble them, because they all work according to the same principle.

List of programs for windows 10 and all the rest.

Auslogics Disk Defrag.
SuperRam
Advanced defrag
Ashampoo magical defrag
ScanDefrag
Memory Improve Ultimate

Do not use online tools to check for garbage, they will not help, it is better to do it manually.

The article shows how to clean your computer from garbage, namely: hard drive, registry, restore points and defragmentation. Keep only what you need on your computer. At the end of the video.

Today I went to watch one computer, I was told that it slows down and may need to re-install Windows. I looked at this computer and the hardware seems to be quite good, except that the RAM is not enough, only 1 GB. But even for such a volume of RAM, it worked very slowly.

It turned on and off for a long time, and it slows down both with files and on the Internet. Well, if the computer used to work fine, and began to glitch a little, then this is noticeable and even a little angry.

I want to tell you how I brought this computer back to life, and how to do without reinstalling the Windows operating system. When the computer starts to work slowly, then reinstalling the OS usually helps (if it's not about the hardware). It's just that if Windows has been running on a computer for a year or two, then it dulls by itself, and no amount of cleaning will most likely help.

But on the computer that I undertook to treat the brakes, Windows was installed a few months ago. And I didn't really want to install an operating system anew. The computer is working (in the office) and I didn't want to set it up anew.

Therefore, I began to study the enemy from the inside, and somehow, out of habit, I climbed into the most sore spot of such problems, this.

What to do if the computer slows down?

There was just a nightmare that was being done. There were a lot of different programs, toolbars and services that loaded along with the computer, tortured him during work, and turned off with him. That's why it took so long to turn on and off. Moreover, the brakes when working from these programs, because they performed their tasks, and of course used both system resources and the Internet connection.

What I did, I launched my Total Commander which has a built-in startup management utility and cleaned up the list. I removed almost everything, leaving only the antivirus and a couple of other programs the user needs. How to remove programs from startup, I wrote in the article.

So I rebooted the computer and was surprised at the result myself, everything worked fine.

But I decided to do a few more procedures in order to probably remove these "slowdowns" of the system.

Started cleaning the registry and unnecessary files. I used a utility from the same Total Commander, I didn't want to install CCleaner. Then I launched and disabled unnecessary add-ons in the browser (in Chrome).

I rebooted my computer again and was happy with the result. The system worked like a fresh one, everything quickly opened and started. Here is a real example of getting rid of a slow computer without reinstalling Windows. Good luck friends!

Progress never stands still, which makes human life only easier every year. Personal computers are no exception, because hardware and software are regularly updated. But no PC will be able to delight with its work, if you exclude human intervention. It's no secret that freezes, various errors and lags are most often caused by the fact that no one has been cleaning the system for a long time. Any information tends to remain on the drive, and the processing of this information takes up more and more power, so you need to regularly clean your hard drive using third-party software or standard Windows tools. Is it so difficult to “clean up” your hard drive? Let's take a little time to understand this procedure and find answers to all questions regarding how to completely clean your computer.

Cleaning your computer

All known operating systems use a hard disk to store any information: lags of various programs, temporary data, files in the recycle bin, etc. If we talk about Windows, then large amounts of information can be in the registry. All these accumulations can noticeably affect the operation of the device, so you need to know how to completely clean your computer in order to avoid the brakes of the operating system.

Partial cleaning

Have you decided to take on the “cleaning” of the workspace, but are afraid of losing your personal data? Do not be alarmed, because in order to get rid of freezes, it is not necessary to demolish the system to the root. Standard tools and a variety of software will help you get rid of the garbage accumulated in the system.

Browser data

The browser is used by users most often. It is from there that the active collection and sorting of data takes place. All information that appears during operation is recorded on the hard disk and slows down the system quite noticeably. This problem is of great relevance on old equipment, which already does not cope with processing very quickly.

There is a very simple way to clean browsers from accumulated information garbage, for which the built-in tools are enough:

Internet Explorer users can get rid of temporary files using the Control Panel. You just need to open “Browser Options” and delete all browsing history, which is located on the “General” tab.
In Mozilla Firefox, you need to go to the options window, select "Settings" and go to the "Advanced" section, there you need to find the "Network" item. Clear the cache data, and then select the heading "Offline Web Content" and click on the "Clear" button to get rid of unnecessary data.
The Google Chrome browser automatically cleans up unnecessary data if you enable this option in the settings. If your software runs on the Chrominium engine, then you can significantly speed up the process of Internet surfing with just a few mouse clicks. Hold down the Ctrl, Shift and Delete keys on the keyboard. These actions will open a menu in which all functions for clearing Google Chrome data will be available.

Using Ccleaner

How do I completely clean my computer using the standard software? The answer to this question will help you find a software called Ccleaner. This program has a positive reputation among a huge number of users. The free version can be easily downloaded and installed from the publisher's official website. The simple interface of the program makes the whole procedure very easy.

Ccleaner analyzes and cleans the system, temporary files and cache of all applications that are installed on your computer. The whole procedure looks pretty simple:

Select the desired tab within the program and check the boxes next to the items of interest.
Click the Analyze button and wait a while.
After analysis, the program will provide a list of files, programs and folders that can be deleted.
Click the "Clean" button and be content with a clean system.

Important! If you are interested in registry cleaning, then Ccleaner is your choice. Just select the "Registry" tab and follow the steps described above.

If a partial cleaning of the operating system did not bring the desired results, then you should learn how to completely clean the hard drive on your computer.

Complete cleaning

Now we will talk about starting the life of a computer from scratch. This method is the most effective, but more laborious in comparison with the previous ones.

In order to carry out a complete cleaning of the hard drive, you need:

Open the “My Computer” tab and open one of the disks by right-clicking on one of the disks.
In this menu, select the "Format" item, set the necessary parameters and confirm your actions by clicking on the "Start" button.
The uninstallation process will start, and after a while the disk will be cleaned up.

Important! This method will not be able to get rid of the information that is on the system disk from the operating system.

But in order to clean up the system disk, you must do the following:

First, you need to combine the drives by right-clicking on the "My Computer" shortcut. Select the "Management" section in the menu that appears.
Click on "Disk Management" and combine the media using standard tools in the interface of the window that opens.
Then repeat all the steps that were described above.

Important! To completely uninstall the Windows operating system, you will need a Windows 7 (8, 8.1, 10) installation disc. During the installation, the user will be offered various operations on the partitions, where the complete removal of information from the media is carried out.

Defragmentation

You can also achieve fast performance with defragmentation. It is very easy to carry out it:

Open “My Computer” and right-click on one of the drives.
A context menu will open, in which you need to go to the "Service" tab.
Check the media for errors and feel free to run the defragmentation utility. The process will take a long time, and it is not recommended to use a computer during it.

Important! Only defragment if you have an HDD, not an SDD. SDDs do not need this procedure.

Now you know how to completely clean your computer from information junk and return the computer to working condition. By following the instructions and recommendations that you have read, you can easily achieve the desired result.

If a computer's hard disk is divided into several volumes, then even beginners do not have problems with cleaning up unnecessary information from logical partitions, since a simple method of uninstalling files in Windows Explorer works. But the most important for Windows is the system drive "C", on which the OS itself is installed. It is very important to monitor the availability of sufficient free memory on this volume for the normal functioning of the system, as well as to correctly clean up Windows in order to optimize its operation.

Below are guides on how you can completely clear your computer's memory without uninstalling the Windows operating system. First, we will consider the methods of cleaning a PC with Windows 10, and then the methods recommended for Windows 7 and 8 (which are also effectively applicable in the "Top Ten").

Technique for cleaning the system partition in a computer on Windows 10

To clean Windows 10, follow these steps:

Compact OS and hibernation

In the new "Tenth" OS, the developers have provided the ability to compress system files, which can save disk space on the "C" drive with a volume of at least 2 Gb in 64-bit OS and about 1.5 Gb on computers with a 32-bit system. In previous versions of Windows, hibernation could only be turned off completely, and in Windows 10, you can adjust the file size.

Uninstalling built-in programs in Windows 10

In addition to moving programs described in the first section, Windows 10 now has access to uninstall them. This can be done independently through the built-in tools of the operating system or using the current version of "CCleaner".

This concludes the new chips in the operating system with the index "10" and then we will consider the methods applicable in all current and supported by Microsoft versions of Windows 7, 8 and 10.

Using the built-in Windows cleaning program

It is required to perform the following several sequential steps:

Cleaning your computer from unnecessary applications

To do this, you need to take the following steps:

Analysis of used disk space

This utility performs a full automatic analysis of the contents of the computer and indicates to the user what is consuming the most memory. For example, if you find a significant number of image and video files that are not planned for use in the future, you can quickly delete them to clear a large amount of PC disk space.

Wipe temporary files completely

Unfortunately, the built-in Windows cleaning program cannot completely remove temporary data left from numerous user-installed applications. The most convenient and efficient utility for this purpose is freely redistributable.

The program has passed, many years of testing by a huge number of users and has earned good reviews. One of the important advantages of CCleaner is its intuitive interface and high quality of tasks performed.

Additional ways

Monitor unused utilities on your own and uninstall them if there is no need for them;
It is not recommended to keep music and video files on the C drive. It is better to use logical partitions for this;
Configure the settings for saving OS restore points;
In computers with a small amount of memory, the hard drive should be completely turned off and do not use hibernation mode, since it uses several gigabytes of memory on the system disk.

Good afternoon, dear readers! In this article, I will show you how to completely clean your computer from junk and thereby speed up its work. An excellent free program will help us with this. CCleaner - created to clean and optimize the Windows operating system.

If your computer starts to work slowly, takes a long time to load, slow down, etc. Do not rush to call a technician or reinstall the Windows operating system. So as in most cases, the main reason for the slow operation of the computer is its "trash".

By installing and uninstalling various programs, games, visiting all kinds of sites, downloading files, in two words "working with a computer", we imperceptibly clog up the system. Thus, we slow down the computer.

In order for the computer to work as quickly as possible, it is necessary from time to time to clean it of garbage, which we will do today. To completely clean the computer, a special program CCleaner will help us.

Download CCleaner

The CCleaner program is free to download on the official website.

How to completely clean your computer of junk using CCleaner

Cleaning

1. After launching the CCleaner program, by default, the "Clean" item will be opened.Windows and applications from unused and unnecessary files. Here you need to click on the "Analysis" button. Then the system will be analyzed.

2. Upon completion of the analysis, we see a message where it is written that approximately 3850 megabytes of unnecessary garbage will be removed. We press the button "Cleanup". After that, the system and applications will be cleaned.

Registry

1. After we have cleared the computer of unnecessary garbage, go to the second item "Registry". Here you need to check the Windows registry for errors that can seriously affect the performance of the operating system.

To do this, open the "Registry" item, then click on the "Search for problems" button.

2. Upon completion of the search for problems, click the "Fix" button.

4. In the newly opened window, click on the "Fix Selected" button. After that, the registry errors will be corrected.

The process of correcting registry errors must be repeated several times until the errors are completely corrected.

Service

1. After correcting registry errors, go to the final item "Service". In the sub-item "Remove programs" remove all unnecessary programs by selecting them and clicking on the "Uninstall" button.

If you are not familiar with the program, try to find its description on the Internet, if necessary, delete it too.

2. After removing the programs, open the "Startup" sub-item, here we see a list of programs that start when Windows starts, turn off unnecessary programs by highlighting them and clicking on the "Turn off" button.

They will remain on your computer, but will not open automatically when Windows starts, this will significantly speed up the boot of your computer.

After completing these steps, you will completely clear your computer of garbage and speed up its work, read also other ways to speed up your computer, that's all for me, I wish you success!

Index in the designation of the microcircuit datasheet

DIY running lights on LEDs - a circuit on the ATtiny2313 microcontroller

Smooth switching off of the light in the car interior

Hybrid cyclotron without OOS of class "a" Varieties without transformer circuits