Technology is expanding and improving to make our lives more comfortable. Just think how much easier it would be if we didn't have to worry about charging for devices. But until this problem is solved, we will discuss how to charge the iPad from a computer.
Charge correctly
The problem can occur if you forget the adapter or it is broken. To charge your tablet from a PC, you need a cable, preferably original or MFI-certified. You need to understand how to properly charge your iPad. It would seem that everything is elementary: connect the cable to the tablet, insert it into the USB PC - and you're done. But not everything is so simple.
Speed up the process
When you are connected and the iPad is charging from the computer, "No charging" appears. But this is not entirely correct message. The charge goes, just very slowly. And if you also use the device during the process, then it will not charge at all. Here's the thing: to charge the tablet, you need a current of at least 2 amperes, while the USB input produces an average of 0.5 amperes.
Let's say you find an input where the tablet charges noticeably faster. Now the answer to the question of how to charge an iPad from a computer is to put the device into sleep mode. The device will charge significantly faster if not used during this process.
From Mac
Great if you own a Mac, as it has more powerful ports that can provide enough amperage to charge your tablet. You can hardly tell the difference between a Mac and a wall outlet.
The answer to the question of how to charge an iPad from a laptop is to buy a special cable, on one side of which there is an output for a 30 pin connector or lightning, and on the other there is a branch for 2 USB. Thus, you can connect to two ports at the same time, which will double the current strength.
Useful add-ons
An excellent solution to the problem can be a program for charging the iPad via USB or a special device, the principle of which is to start a mechanism to increase the amperage in the USB ports of your laptop. This way you can charge your device faster.
The most popular of this segment are: Ai Charger, GIGABYTE On / Off Charge. These add-ons will do a great job of charging your iPad from your computer.
For car enthusiasts
If you own a car, you can easily charge the tablet from the cigarette lighter, but for this you must have a USB adapter to the cigarette lighter for iPad. This can be said to be the answer to the question of how to charge iPad without charging. However, you should not leave the device overnight, as it is possible that in the morning the battery of your car may be discharged.
Using Power Bank
The last option, how to charge iPad without a charger, will be external Power Bank batteries.
USB mobile chargers provide the required amperage and easily charge the tablet with only a wire, and the speed will be the same as from a regular 220 volt network.
The most popular and reliable are external batteries from the Chinese company Xiaomi. There are models for 5000, 10000, 16000 amperes. Apart from Xiaomi's Power Bank, there are other variants of this segment that represent a quality and durable product. Everyone will find something for themselves.
Articles and Life Hacks
If a user has purchased an iOS tablet for the first time, he will likely have many questions related to its operation. So, he should know about how to properly charge iPad... Let's try to figure it out, because this information will help more often and generally extend the battery life of our device.
Battery and iPad Charging Guidelines
In order for the battery of the device to last as long as possible, we need only a few recommendations. After purchasing your tablet, we recommend that you completely discharge and charge it. It is advisable to carry out such complete discharge-charge cycles at least once a month.
It is highly not recommended to leave the tablet computer without charging for a long time (from a week), otherwise it may not turn on at all. In addition, it must not be left on for a long time and with a full charge, otherwise the capacity of the battery will decrease over time.
Finally, the iPad must operate in temperatures between 0 ° C and 30-35 ° C. It is forbidden to use it at temperatures above or below these indicators.
To charge the Apple tablet, we need a special adapter from the package. You can connect it via a USB cable to a PC, or to a 220 volt electrical outlet. In the second case, charging takes about 6 hours. When using a connection to a computer, keep in mind that you can only charge the device when it is turned off. This charge can last up to 12 hours.
How to properly charge our iPad and save battery power?
Experts believe that the lithium-ion battery of this tablet should be charged if the charge is less than 20%. So how do you properly charge your iPad? As already mentioned, in the first days of operation (as well as once a month), it is recommended to carry out a full discharge-charge cycle of the device. It is even better if, after buying a tablet, we fully charge and discharge the device from 3 to 5 times in a row.
Now let's debunk the myth that an extra battery charge negatively affects the operation of mobile technology in general. The modern manufacturer has long built in a special circuit that protects the battery from such adverse effects.
To save battery power, we can:
reduce the brightness of the display through the settings ("Settings");
update the firmware regularly;
turn off Wi-Fi when we are not using it;
enable "Air mode" through the settings;
disable bluetooth, notifications, geolocation services;
enable the automatic blocking mode through the basic settings ("Auto-Lock");
delete unused mailboxes and disable the automatic mail check function;
disable unnecessary sounds ("Sounds") through the basic settings.
If we adhere to at least some of the above rules, it will help to extend the battery life of our device.
Details Category: Settings, instructions for iPad. Published: Wednesday, 24 July 2013 09:17 iPad make serious mistakes by improperly charging the tablet or allowing it to completely discharge. This instruction will be equally useful to owners iPad and owners iPhone ... If you carefully and attentively take care of the battery of the device, then it will delight you much longer.Key points to properly charge and discharge your battery:
Do not completely discharge the battery!
Why is it important? You've probably noticed that a special notification pops up at a discharge of 20%. And again it warns you at a 10% discharge. V Apple they did it for a reason, because they know what a full discharge is fraught with for lithium-ion batteries.
Discard old stereotypes and do not try to completely discharge the battery several times immediately after purchase. This way, you are more likely to make things worse.
Use only original chargers from Apple , do not try to save money by buying questionable counterparts. Once I practically "killed" a new phone battery this way. Lg by purchasing a non-original charger.
Make sure your charger matches your device model.
For example, a charger from iPhone you will take a very long time to charge your iPad , but all because it is not intended for a tablet. Though iPad mini according to Apple , you can charge.
Use iPad in the temperature conditions provided for it. The temperature range for operation is from 0 to 35 degrees.
Don't let your tablet sit idle for a long time. If you still plan not to use it for a long time, then check it at least monthly and recharge it.
By the way, there is one more small nuance that was revealed in a practical way. A friend of mine once complained to me about a problem. He charged his iPhone by 100%, but, despite this, the charge fell catastrophically. I advised him to pay attention to such a nuance. When i -the device is charging, then we see the charging icon in the upper right corner and percentages.
So, when the percentage of charge is 100%, this does not mean that iPad fully and correctly charged. If there is a battery icon next to the percentages, as in the screenshot above, then you should wait. Only when the battery icon is as in the screenshot below (with the "socket" symbol), then your device is fully charged.
After my friend charged his iPhone according to this scheme, his problem completely disappeared. And so far, the problem of fast discharge does not arise for him. Of course, if you use i -the device is in merciless mode, turning on the brightness to the full extent, using 3 G - Internet, etc., then the battery will not last long.
In the next review, we will tell you how
As you know, the iPad can be charged both with a charger from the mains, and from a personal computer via a USB port connection. However, having a right does not always mean that it is practically possible to exercise it.
Users often ask - why, when you connect the iPad to a laptop or stationary PC, an inscription appears that the battery is not charging? Did the store slip a bad tablet? Take your time to run to the communication salon and write complaints. Most likely, the reason is in the personal computer itself, from which you are trying to charge the iPad.
Why is the iPad not charging from the computer?
The thing is that in the process of charging the device consumes quite a lot of power and not every personal computer is able to meet such high requirements.
If you have an Apple computer not older than 2011, there should be no problems with charging your tablet computer. New Mac computers have a specially adapted USB interface for connecting and charging iPads.
If you don't have a Mac, but a regular PC based on the Windows operating system, the standard USB connectors may not be powerful enough to charge the iPad.
Typically, the system unit has multiple USB ports on the front or rear panel. All these interfaces can be of different types and, accordingly, can deliver different amperage. Just try to find the most powerful USB connector. Perhaps, during experiments on one of the outputs, the iPad will throw out a notification that charging has started successfully.
To reduce the load, charge tablets only in sleep mode. To put it into sleep mode, you need to block the tap of the tablet. If after that the device does not want to charge, you will have to look for more sophisticated ways to solve the problem.
In fact, it would be best to charge directly from the mains using a dedicated adapter. It is advisable to resort to the mediation of a desktop computer or laptop only in cases when there is no special charger at hand or you are somewhere in a remote area. For example, let's go to the dacha. The laptop is there, but the wife forgot to put the charger in the backpack. Or there is no electrical network at all on site and you need to recharge the iPad from the laptop battery at least a little.
Install the utility to increase the amperage on USB
Knowing about this user problem, many computer equipment manufacturers have developed special programs that allow you to bring the power flow through the USB interface to a level sufficient for normal iPad charging.
These utilities are developed strictly for specific motherboards, and not only will not work with other hardware, but can also lead to serious damage to the equipment.
Therefore, find out exactly the brand of the motherboard installed on your PC or laptop and look for advising software on the manufacturer's official website. It is possible that in order to turn on the amperage amplifier for USB, you will have to make some additional settings in the BIOS. In this case, if you doubt your computer competence, it is better to invite a professional for such a responsible business.
- The iCharger utility is designed for MSI notebooks.
- AiCharger is suitable for Asus laptops.
- The ON / OFF Charge software is for GIGABITE notebooks.
Tricks and gimmicks
Your favorite iPad won't charge from your computer? It's time to get a little smart. The USB interface has one such wonderful property - if you connect to two ports at the same time, then the total energy output also doubles.
And here is an easy way how you can charge iPad even from a desktop that is not suitable for this case. Purchase a conversion cable with two USBs at one end. Connect these two connectors to the two inputs on your computer, and connect the remaining end to your tablet. Now the iPad will receive electricity simultaneously through two channels and this should be enough for a normal charging process.
- Use only the USB cable supplied with your tablet to connect devices, as other types of interfaces may have reduced power and will not be able to effectively charge the battery.
- Charge iPad only in sleep mode, otherwise the charging process will take a very long time - a day or more.
- If the tablet has not been recharged for a very long time, the battery power level will be very low and then, even after connecting to the charger, it will take about another twenty minutes until a notification about the start of charging appears on the screen.
- The computer or laptop itself, from which the iPad is charged, should not be in sleep or standby mode.
- It is advisable that the laptop was in recharging mode. Otherwise, the system will limit the supply of current to the USB in order to self-protect the battery.
- It is recommended to use Apple devices such as MacBook, MacBook Pro or Mac Mini to charge iPad. All of these machines are equipped with powerful USB ports specifically designed to charge iPads.
Users of modern mobile devices are accustomed to the fact that they can charge their electronic “friends” in two ways - using a connecting cable, charger and socket, or using a connecting cable and USB port of a PC. However, the second method cannot be called convenient - the computer replenishes the resources of the device much slower than the outlet, and in the case of the iPad, the process is so slow that the inscription "No charging" appears next to the charge indicator.
Of course, the owner of the Apple tablet has a question - is it possible to charge the iPad from a computer at all? We will delight you - you can! But the recharge will move at such a meager speed that it will take almost a day to fully charge! But why does the iPad write - "No charging", because even at a scanty speed, it goes? And is it possible to speed up the process of charging a gadget? We will answer these questions in this article!
To quickly charge the iPad, it requires a current of 1.2 A, while the standard USB ports of a Windows computer usually give out about 0.5 A, and this value is much lower than the minimum threshold required to start charging. That is why the “charge” command does not work in the “head” of the tablet, about which it carefully notifies the user.
It is noteworthy that by connecting the iPad to a computer or laptop from Apple, you will not encounter a similar situation, because their USBs give out a large current, and the device is safely charging. Of course, not as fast as from the outlet, but much faster than in a day.
However, in our country, not so many people use Mac computers. What should Windows PC owners do? How to charge iPad quickly if the charger is forgotten or lost, and the USB port of the computer is the only possible source of power? Use the guidelines below.
How to accelerate the charge?
We are looking for the "strongest" USB port
Above we mentioned that the standard USB port of Windows on a computer produces an average current of 0.5 A, but it is interesting that in different sockets it can be very different. At the same time, as a rule, in the connectors located on the rear wall of the system unit, it is larger than in the front ports.
Therefore, the first recommendation is as follows - try to find the "strongest" port, perhaps there is one on your PC, when connected to which the inscription "No charging" will disappear. If it does not disappear when connected to any USB, we advise you to leave the tablet connected to one of the ports on the back wall, even if in your case the current in it will be slightly higher.
We "unload" the iPad as much as possible
The less the tablet "spends", the faster it will charge - this is logical, so the second step that needs to be taken to speed up the power of the device is to "unload" it as much as possible - close all applications running in the background, activate the air mode, block the device and do not use it.
To activate the airplane mode - unlock the tablet, swipe up from the bottom and activate the icon with the airplane icon in the quick control curtain that appears - just tap on it. In this mode, all wireless functions of the device will be disabled.
Installing a special program
The above two ways to speed up iPad charging will, unfortunately, help only marginally. If this state of affairs does not suit you, you need to move on to a more radical measure - installing a special program that can cleverly redistribute the PC's energy, "supplying" a current greater than 0.5 A to the USB port. Such utilities can strengthen the USB connector even up to 2A.
However, you need to be careful with them, because if at a low current the maximum that threatens you is not a fast charge speed, but at an increased current, both the internal elements of the PC and the iPad may suffer.
The most popular program for increasing the current on USB ports is called Ai Charger, developed by its well-known company ASUS. It, according to the official description and user reviews, is very convenient and safe.
The utility only needs to be installed and rebooted, then when the computer is turned on, it will always start on its own, and it will also independently read devices connected to USB and give them the required amperage.
By the way, a special plus of the program is the fact that it can charge the device even if the PC is in sleep mode. If you are charging iPad without the program, you will need to constantly take care that the PC does not "fall asleep".
We buy a special cable
Of course, the advice to purchase a special cable for fast charging iPad is not very appropriate when you need to power the gadget here and now, and there is absolutely no time to run to the store. However, you should be aware that such things exist.
What is a Quick Charge Cable? On one side there is a standard connector for iPad, on the other there are two USB - which means that the tablet can be connected to two sockets at once, thus doubling the current.
Let's summarize
Well, now you know how to charge iPad from a PC and understand what methods can be used to make the charging process fast. Unfortunately, the first two methods will not help you speed up charging significantly, and the last one requires either you have a special cable or time to find and buy it - you can just as well buy a new iPad charger and easily charge the device from the outlet.
So in conditions when you need to get a charged tablet urgently and there is no time for purchases, you have only one way out - to use a special program. Just do not forget - not all of them are safe - the one that we recommend has a lot of positive reviews and a trusted developer, and therefore if you already decided to use a special utility, download the ASUS development!
