What is the i button on apple watch. Turning on and setting up Apple Watch for the first time

The Apple Watch is not a must-have gadget for everyone - but it can make it easier to complete a variety of tasks. For example, listening to music without using an iPhone, or determining physical activity that people who monitor their health may need. Knowing how to use iWatch, you can receive SMS messages and phone calls on your watch - moreover, not only from iPhone, but also from models running on Android OS.

Turning on

The first question for the user of the watch arises about their inclusion. There are three ways how to turn on Apple Watch:


Switching off is performed by the same side button by holding it until the Off slider appears on the screen. and swiping it. Or simply cover the watch with your palm - the light sensor will work and the screen will turn off.

Setting up a smart watch

The next important question is how to set up Apple Watch for further work. To do this, you need an iPhone, preferably with the latest version of the iOS operating system. The first generation smartwatch required an iPhone 5. The Apple Watch Series 3 sold since September 2017 cannot be set up without an iPhone 6 model.

In order to connect Apple Watch to iPhone, you need to sync the devices with each other. The pairing process with the third series of watches will not take long:

  1. The Watch application is downloaded to the smartphone, in which the button for pairing with a smart watch is pressed.
  2. the iPhone is brought up to the watch.
  3. On the watch, a similar button is pressed in the settings.
  4. The viewfinder of the iPhone camera is aimed at the watch screen, where a picture resembling a galaxy appears.

After a certain time it takes for gadgets to synchronize, it becomes possible to set up a smart watch directly from an iPhone.

If synchronization is not required (another iphone will be connected to the watch), unpair Apple Watch as follows:

  1. Open the Watch app on your smartphone.
  2. Select the "My watch" tab at the bottom of the window.
  3. Select the connected Apple Watch and click on the " i ".
  4. Click Unpair Apple Watch.
  5. Confirm the cancellation of device synchronization, after which all data about the watch will be deleted from the gadget.

First setup

To create a pairing with Apple Watch, an iPhone (with Bluetooth enabled) is brought to the watch and perform the following actions:

1. After a message appears on the phone screen about the possibility of starting the configuration, click "Continue".

2. Position the center of the watch display exactly opposite the iPhone camera viewfinder.

3. Choose the hand on which the gadget will be worn.

4. Enter the Apple ID password, with which the user has access to various services.

5. Configure geolocation, the Activity application and, if necessary, mobile communications from the iPhone.

6. Install applications from the online store, set up various useful services.

The first time you use it, you will have to spend more time setting up. Other parameters (including the password for accessing the gadget) can be changed later. This does not always require an iPhone - some of the settings are available from the watch.

For example, to change the watch face on the Apple Watch just press hard on the screen. A gallery of watch faces will open. You need to scroll through it with a swipe gesture and choose the option you like.

It will not be difficult and change language on Apple Watch... It is enough to go to the screen for writing a message or reply, with an effort to press the display. The language selection button appears. And also the replacement is performed from a smartphone - the language selected for the iPhone for dialing SMS is automatically set on the watch.

Digital Crown Button

A novice watch user may be interested in information about the Digital Crown in Apple Watch. What is it and what functionality does it have? The main purpose of the part is to scroll through images, lists and maps, control sound, font sizes and other sliders. It is possible to call with its help a list of phones, to which you can then send a dictated SMS message or call.

Additional Digital Crown features include:

  • opening the last running application by double clicking;
  • activation of the voice assistant Siri with a long press;
  • use as a Home button;
  • transition to watch faces.

With this element, the user can quickly switch between different applications. To do this, double-click on the wheel. It also takes screenshots of the watch screen - but only if you press simultaneously with the side button.

Synchronization with Android OS

If you don't have an iPhone, you should know how to connect your Apple Watch to Android - although the functionality will be severely limited. To synchronize mobile gadgets, the user is required to:

  1. Install the Aerlink: Wear Connect for iOS app on your phone by downloading it from the Play Market;
  2. Download the BLE Utility to the smartwatch;
  3. Launch Aerlink by activating the iOS Service;
  4. Open the Peripheral tab in the BLE Utility application on your watch.

Sometimes synchronization is not performed the first time, so the steps will have to be repeated. The paired watch and smartphone do not form a real pair, as when using an iPhone. Apple Watch in this case can only monitor the phone charge, receive SMS and call notifications. There are no options for sending a message, making a call or answering it.

Multimedia

When all the settings are complete, you can start downloading useful information to your smart watch - including multimedia files. When synchronizing with an iPhone, it becomes possible download music to Apple Watchto listen to it even when unpaired using your AirPods wireless headset. Instructions for uploading audio files to your watch are as follows:

  1. The Watch application starts on the smartphone and the music folder opens.
  2. The required number of melodies is selected (about 2 GB is available on a smart watch, which is enough for 150-200 tracks).
  3. Start synchronizing the created playlist, which may take from 10 minutes to several hours.

Synchronized ringtones can be played directly from the watch, even if the iPhone is turned off, not charged, or is far enough away. Before starting, you first need to change the music source in the Select Source settings menu. The result is the ability to use the Apple Watch as an iPod.

How to set up WhatsApp

Since the developers of the application have not yet adapted WhatsApp for the Apple Watch, its functionality may be somewhat limited. To set up notifications, you must:

  1. Download WhatsApp to your phone;
  2. In the Watch application on the iPhone, set the appropriate switch.
  3. In the WhatsApp settings on your smartphone, activate all items in the Notifications menu.

To uninstall an application, just turn off the setting on the iPhone that is responsible for using the application on Apple Watch.

Sports functions

In the list of default installed smart watch applications, there is an Activity utility that allows you to track physical activity and determine a number of indicators:

  • the "Mobility" ring is responsible for counting calories burned;
  • the "Exercise" ring monitors the intensity of your workouts;
  • the warm-up ring controls the user's activity during periods when he moved for at least 60 seconds. contract.

Swipe up for details on how to fill in the rings. With another swipe, you can get data on the number of steps, distance traveled, information about training.

The app also allows change the goal of the activity on Apple Watch.To do this, you must forcefully click on any screen in the "Activity" program and set the required Calories. Changing Warm Up and Exercise tasks is not available.

Apple Pay

Among the convenient functions of the gadget is the ability pay with Apple Watch instead of a bank card. To do this, you will have to connect to the appropriate service using your Apple ID profile. In order to set up Apple Pay on Apple Watch, you need:

  1. Open the program first on the iPhone.
  2. Transfer it to your watch via the Watch app.
  3. Add a card to the list.

Cards that have already been used to pay for purchases in the App Store or iTunes Store are added by entering their security code. The new payment method will have to take a picture with the iPhone camera and follow all the instructions of the application. Sometimes it takes a few minutes for the bank to verify the identity of the cardholder.

To pay by hours you need:

  • make sure that the store accepts payment in this way (one of the symbols);
  • double-click the side button to use the default map;
  • keep the watch display at a distance of several centimeters from the contactless reader;
  • wait for a slight pulsation of the clock.

Protection features

Inexpensive smartwatches are protected against counterfeiting and theft. In order to check Apple Watch for authenticity open the settings of the gadget and find the field with the serial number (IMEI) in the "General" menu. For the third generation of watches, this opportunity is available using an iPhone synchronized with them. The device information contains all the necessary information, including the IMEI. You can also find the serial number on the watch case or strap connector.

The model is protected from unauthorized access with a password. It is not necessary to install it, but if you have confidential information on your watch, you should take care of protection. Sometimes users have questions, how to unlock Apple Watch if you forgot your password... It's easy to do - just remember your Apple ID and reset your watch.

Reset Apple Watch to factory settings you can use the paired iPhone and the watch app installed on it. The information is erased directly from the gadget - after connecting to the charging cable, disconnecting with the side button and selecting the item to delete content and settings in the menu that appears. After the reset, the password disappears; to continue working with the Apple Watch, you will have to sync with your smartphone and go through the setup procedure - or restore a backup.

Firmware upgrade

For smart watches, it is possible to replace the old firmware. In order to update Apple Watch OS 4 you need an iPhone with the latest version of iOS. User actions in this case should be as follows:

  1. Make sure that the watch is charged at least 50%, connect it to the charger.
  2. Connect the iPhone to a Wi-Fi network, put it next to the clock.
  3. Open the Watch program on the phone, go to the main settings and select the software update item.
  4. Download update - sometimes you have to enter a password to do this.

The flashing may take about an hour. During the update process, you cannot remove the watch from charging, close the Watch application on your phone, and restart at least one of the synchronized devices. Knowing how to flash Apple Watch, you don't have to worry that the operating system installed on the gadget will become outdated and will not support new functions.

If the smartwatch is frozen, a reboot will help restore its functionality. In order to restart Apple Watch you can use two ways:

  1. By pressing the side button and swiping across the screen when the Power Off menu appears. The key is held down until the manufacturer's logo appears.
  2. By pressing the side button and the Digital Crown at the same time, releasing them only after a reboot.

To increase the operating time of the smartwatch, there is a battery saving mode in the options list. When using it, the gadget only shows the time and cannot sync with phones. Eco mode is automatically activated if the battery charge drops to below 10%. Thanks to this, the watch can work for several more hours. If you want to turn off eco mode on Apple Watch, the gadget will have to be reloaded using the side button. Automatic shutdown occurs after charging.

To charge Apple Watch use a special cable and power adapter connected to the mains. The gadget should be put on the charger with the back side and wait until the charge indicator shows 100%. The process of restoring the battery capacity takes up to 2 hours. After that, the gadget will work for 18 hours in normal mode and will hold a charge for up to two days, if you just use it as a watch.

How to find Apple Watch using iPhone

To find your watch, you need an iPhone, iPad, or iPod touch with iOS 10.3 or higher, and the Apple Watch itself must be turned on.

  1. Install app Find iPhone;
  2. Log in (login and password Apple ID from your iCloud account);
  3. In the My devices tab, select Apple Watch;
  4. Select an option Actions... When your Apple Watch is on, you can track its location on a map, mark it as lost, delete all data from your device, or play a beep to locate the watch.
  5. If you are confident that the Apple Watch is in close proximity, you can press Play sound... The watch will start emitting a repeating beep;
  6. If the clock is found, turn off the sound by clicking on the option Close on the dial.

application Find iPhone will be useless if iWatch is turned off or out of Wi-Fi zone. In this case, you must use the Lost Mode in Find iPhone to lock the device and track its location. When someone finds and turns on your watch, you will immediately receive a corresponding notification.

How to connect Apple Watch to Wi-Fi

Connecting to Wi-Fi makes it possible to use the advanced functionality of the gadget, for example:

  • use the voice assistant Siri;
  • create Reminders and Calendar Events;
  • control Apple TV;
  • receive and send messages.

The connection is made automatically to the Wi-Fi network in which the iPhone connected to the watch was registered.

Consider the features of manual connection:

  • make sure your iphone has Bluetooth and Wi-Fi enabled;
  • check if the devices are connected to each other;
  • disable Bluetooth, while the watch will be connected to the smartphone only via Wi-Fi connection;

Now you can use all the functions of the Apple Watch even at a great distance from the iPhone. The Bluetooth range is only 10m, but this connection consumes less power from the watch's battery.

How to turn off Voice Over on Apple Watch

There are two ways to turn off screen sound:

  1. Place two fingers on the display. To resume dubbing, you must do the same.
  2. In order to completely turn off the voice acting, you need to open the Settings in the clock menu. Next, the General tab, then select Accessibility and it remains to click on the VoiceOver button.

How to track sleep

Unfortunately, the developers do not provide a built-in sleep tracker on the Apple Watch. But there is an opportunity to use third-party applications for analysis, for example:

  • AutoSleep.
  • Sleep ++
  • Sleep Tracker.
  • Pillow (perhaps the best sleep monitoring app. In addition, there is a Smart Alarm function).

How to measure pressure

Apple Watch does not measure pressure. On the net you can find information only about future developments of the company for the implementation of this function in subsequent watch models.

Apple Watch notifications don't come

The following steps will help you solve this problem:

  • disabling the wrist recognition function;
  • disable Do Not Disturb or Screen Lock mode;
  • break and re-pair;
  • reset the settings;
  • cleaning the sensors that fit the wrist.

How to change the strap

This is very easy to do. So, for example, you can change a boring or worn out sports strap for a leather one, or even a Milanese mesh bracelet. Fortunately, the choice on the market is simply huge.

To change you need:

  • Turn the clock face down;
  • Press the strap fixing button;
  • Slide the strap to the side while holding the release button.

Several years have passed, and during this time Apple has managed to bring the watch setting process to perfection. Setting up your new Apple Watch is much easier now than it used to be. Workout data is synced via iCloud, making it easier to migrate from your old Apple Watch to your new one. Moreover, you can connect two Apple Watches at once to one iPhone.

This means you don't have to disconnect your old Apple Watch from your iPhone while you set up your new ones. This way, no data will be lost during the setup process.

If you want to completely switch to the new Apple Watch, then you will need to disconnect the old watch from the smartphone and connect the new one. Below we will explain in more detail how all this is done.

How to disable oldApple Watch fromiPhone

Step 1: Make sure your iPhone and Apple Watch are close to each other.

Step 2: Open the app Apple Watch on iPhone.

Step 3: Select a tab My watchand then choose your watch.

Step 4: This will show all Apple Watch connected to your iPhone. If you have more than one watch, click on the " i»Next to the ones you want to disable.

Step 5: Click Break pair withApple Watch.

Step 6: Now enter your Apple ID password.

Wait for your Apple Watch to reset, erase all content, and reboot.

how throw off Apple Watchwithout iPhone

Step 1: Go to the application Settings on Apple Watch.

Step 2: Go to The main-> Reset.

Step 3: Select Erase content and settings.

Step 4: Enter the password if required.

Step 5: When the reset is complete, go to the website iCloud. com on your computer and disable Activation Lock. To do this, on the iCloud website go to Settings and in the section My devicesselect your Apple Watch. Click the " X»Next to the clock to remove it. Then confirm your action.

how tune new Apple Watch

Step 1: Press and hold the side button of Apple Watch to turn it on. If the watch does not turn on, it needs to be charged.

Step 2: Bring your iPhone to your Apple Watch. A window will appear on the iPhone with a proposal to link the smartphone to the Apple Watch. Click on Start pairing.

Step 3: An animation appears on the Apple Watch. Point your iPhone's camera at the watch so you can see the animation.

If that doesn't work, click Pair withApple Watch manually and use a password.

Step 4: After a while, authentication will complete and Apple Watch will start setting up.

Step 5: Now you need to choose whether you want to restore this Apple Watch from a copy or set it up as new.

Step 6: Then accept the terms and conditions and sign in with your Apple ID.

Step 7: Customize the basic functions as you like.

Step 8: Create a password. You can skip this step, but if you're going to use your Apple Watch for Apple Pay or unlocking your Mac, then it's worth setting a password. By default, you need to enter a password of 4 characters, but you can choose a password of as much as 6 characters, which will be more reliable.

Apple Watch Series 3 Is the latest generation of smartwatches from the Cupertino tech giant. Unlike Series 2, they are equipped with an autonomous LTE module that works through a built-in eSIM (not yet supported in Russia), so they can be used even without a smartphone. But it will still be required to activate the device.

How do I turn on Apple Watch Series 2, 3?

To switch on, press and hold the “long” (not round!) Side button until the manufacturer's logo appears on the display.

If after 10-15 seconds of holding the long side button, the screen does not flash and the device does not turn on, make sure that it is sufficiently charged. Connect the "charger" and leave for 30 minutes. After that, you can try to turn on the device again.

How to set up Apple Watch Series 2, 3?

For the initial setup, you will also need a smartphone updated to the latest iOS version, with Bluetooth enabled and an active Internet connection (via a mobile network or Wi-Fi).

How to do the initial setup

In order to initially set up your smartwatch, you need an iPhone with internet access. How to pair these two devices:

  • Include them;
  • Bring your watch to your iPhone. Wait a while until a message appears on the phone screen asking you to use your smartphone to make settings. In it, click "Next". If it doesn't appear, check Bluetooth - it should be turned on. You can also open the corresponding application and click the Create Pair button;
  • After that, a special animation will appear on the watch screen, and the smartphone will turn on the camera through which it will recognize it. Position the display of the companion device in the center of the viewfinder as shown in the prompts. If automatic recognition does not occur, click the Create Manual Pairing button. The wizard will show you instructions for pairing devices;
  • Choose which hand you plan to wear the watch on;
  • Agree to all terms of use;
  • Enter your Apple ID password.

How to connect Apple Watch 2, 3 to WiFi?

The smartwatch, upon initial activation, copies the settings profile from the connected smartphone. That is, if Wi-Fi, GPS, Siri, etc. are enabled on the iPhone, they are automatically activated on the companion device. Wireless passwords will also be transmitted along with the rest of the data.

You can enable WiFi on Apple Watch 3, as well as disable it or configure other settings, directly in the corresponding window of the First Time Setup Wizard.

What else can you do?

In the Quick Start Wizard, you can also:

  • Set a password for login. It will be activated when this accessory is removed from your hand;
  • Set up a branded payment service;
  • Install applications from the AppStore.

During the initial setup, various tips for use will be shown on the smartphone screen.

Key features of Apple Watch Series 2, 3

Analysis of Apple Watch Series 2, 3 activity

The program for tracking physical indicators is called "Activity" and is preinstalled with watchOS, that is, it is ready to work immediately after the initial setup.

Interesting

Instructions on how to turn activity tracking on or off are shown directly in the first-time setup wizard on your smartphone. There are hints in the application itself.

The donut chart interface displays the following metrics:

  • The number of calories burned while moving (the "Mobility" parameter);
  • The total duration of movements (parameter "Exercises");
  • The number of hours in the current day, in each of which you moved for at least 1 minute (parameter "With warm-up").

To view detailed information about each parameter, you need to swipe up on the screen with pie charts.

The Exercise and Warm Up options are not configurable. "Mobility" can be changed by a strong tap on any screen - after that a screen will open with the settings for the number of calories that need to be burned to achieve the daily goal.

Reminders about the need to "walk" are configured in the control application on the smartphone, in the tab "My watch" - "Activity".

How to measure pressure on Apple Watch Series 2, 3?

No way. This model, like the previous ones, is not equipped with a built-in tonometer and therefore cannot measure blood pressure.

Heart rate measurement on Apple Watch 2, 3

To measure your heart rate, you must run the Pulse program from the applications menu. In addition, the device constantly analyzes the heart rate when the "Training" mode is active, as well as 3 minutes after its completion.

When you open the Pulse program for the first time, the application prompts you to turn on notifications about increased heart rate in the absence of physical activity. This function can be activated if required.

Apple Watch heart rate variability

To measure heart rate, photoplethysmography technology is used, i.e. the pulse is analyzed by the degree of light transmission of blood in the vessels under the skin.

As a result, the quality of the heart rate measurement can vary depending on how the photocells adhere to the skin, on the color of the skin, on the user's health and other factors. The exact value may differ by several beats per minute from the measured value, both upward and downward.

Sleep analysis in Apple Watch Series 2, 3

There are no built-in tools for monitoring the quality and phases of sleep in this companion device. Therefore, for tracking, it is recommended to use third-party software that can be downloaded from the AppStore - such as Sleep ++, AutoSleep, Sleep Better, Sleep Tracker, etc.

How to track sleep on Apple Watch 2, 3 using third-party software

The principle of operation of various third-party software is approximately the same. Required:

  1. Install the desired sleep tracker from the AppStore;
  2. Open sleep tracker and start tracking mode.

Smart alarm for Apple Watch Series 2, 3

To use the watch as a smart alarm, you will also need to install third-party software that supports this function. For example, Sleep ++ or similar from the above list.

How do I use Apple Pay on Apple Watch 2, 3?

In order for the branded payment service to work, you will need to set a password code. This is described in the instructions for the initial setup of the device. In addition, right in the same menu, you can link the card with which you plan to pay for purchases.

To configure the service, if this item was skipped in the initial configuration menu, you will need:

  1. Open the Watch application on your smartphone;
  2. Open the "My Watch" tab;
  3. Open the item "Wallet and Apple Pay";
  4. If a passcode is not set on the watch, the application will offer to install it right now. Do it;
  5. Click "Add card";
  6. Select a card from the list of already linked ones - or enter the data for a new one;
  7. Enter the security code of the card;
  8. Click "Next" and wait for information from the issuing bank;
  9. Click Next.

That's it, the branded payment service will work.

To pay in a store, you need to quickly press the side button on the watch twice and then bring it with the screen down to the terminal. They will vibrate slightly when activated.

Need to know

If the transaction size exceeds 1000 rubles, you will have to enter the PIN-code of the linked card on the terminal to pay.

Unlock Mac with Apple Watch

The watch can only unlock Mac computers and laptops that run macOS High Sierra and support a Bluetooth wireless connection. In addition, all company devices must be associated with one account. To configure unlocking, do the following:

  1. On a computer or laptop, open the "Settings" application, select "Protection and Security", then "Basic";
  2. Check the box next to "Unlock Mac with Watch";
  3. Enter your account password;
  4. Confirm.

All. The computer will now unlock automatically.

How do I charge Apple Watch Series 2, 3?

To charge, you need to use the included wireless charger. It is enough to connect it to the network and put the watch with its back side on its active surface. The charger is equipped with special magnets that automatically align it.

AirPower wireless charging can also be used.

How to charge Apple Watch outside the home

For charging, you can use not only the household network. The power cable can also connect to the USB ports of a computer, laptop, external battery (powerbank), or any similar charger.

How to update Apple Watch 2, 3?

The software update (watchOS) is performed via a tethered iPhone smartphone. Instructions:

  1. Set your watch to charge. Until the update is completed, you cannot remove from the charge;
  2. Make sure they are more than 50% charged;
  3. Open the Watch application on your smartphone, in it - the "My Watch" tab;
  4. Select the item "Basic", in it - "Software update";
  5. Download the update. If necessary, you will need to enter a password for your account;
  6. The update will install automatically;
  7. Installing the update may take time. Wait for completion. The corresponding indicator will inform about it.

You can remove the watch from charging only after the update is completed.

Can Apple Watch Connect to Android?

No you can not. Apple Watch does not work with Android phones. There is no third-party app that mimics the corresponding iOS software.

However, the user community is looking for a different way to pair the two devices. But at the moment, the answer to the question "Does Apple Watch work with Android" is no, it doesn't.

Apple Watch Series 2, 3 Quick Guide

How to check Apple Watch 2, 3 for authenticity

First, make sure it's a Watch, not an iWatch smartwatch or something like that.

How to check Apple Watch upon purchase:

  1. Conduct a visual inspection. Make sure that the case is free of any connectors, including slots for SIM cards or memory cards, connectors for charging, etc .;
  2. Turn on the device. Make sure it turns on in principle;
  3. Try connecting to your smartphone. If during the initial setup the device prompted you to enter your account information, you can enter. The main thing is that there is no "Activate Watch" screen.

How to turn off GPS on Apple Watch 3

GPS does not turn off. It can be disabled on the phone, then the number of geolocation requests will decrease slightly.

Apple Watch Series 2, 3 won't charge - what to do?

If Apple Watch won't charge, you can try the following:

  1. Make sure the power supply is plugged into a power outlet and that it has power. Try a different outlet;
  2. Make sure the wireless charger is in contact with the watch and the magnets are aligned. Try reconnecting. Try flipping the charger;
  3. Make sure the chargers (including the wireless module, cable and power supply) are original and included in the package;
  4. The charger must not have a shipping tape on either side;
  5. The charger and watch must be clean;
  6. Try to force restart your watch. Press the round and side buttons and hold them for 10 seconds. After rebooting, put on charge again;
  7. Try a different cable, a different power supply, or a different wireless charger.

If they still do not charge, take them to a service center.

How to reset Apple Watch to factory settings

The easiest way to reset is to remotely delete all personal data via the iCloud service:

  1. Open the icloud.com website on your computer;
  2. Log in with your account;
  3. Select "Find iPhone";
  4. Choose your watch from the available devices;
  5. Click "Erase" and then select "Next" until the process is complete;
  6. Also click the "Delete" button (the icon with a cross) next to the name of the clock.

Through the app is a little more complicated. More on this will be written later in this manual in Russian (in the section "How to break a pair").

In order to reset the watch (to carry out the so-called "Apple Watch Restore"), the associated iPhone must be connected to the Internet via a mobile connection or Wi-Fi.

How to charge Apple Watch without original charging

The third-generation companion device (Apple Watch series 3) has limited support for Qi wireless charging and may be compatible with some chargers. Try placing it back against a Qi-enabled active charger for a few seconds. If charging goes, this device can be used.

How to unpair Apple Watch 2, 3

Before selling the watch, you will need to remove your own credentials from the watch. How to unlink Apple Watch from Apple ID:

  1. Open the control application on the phone;
  2. Open the "My Watch" tab;
  3. Open the "Information" menu (indicated by the i symbol in a circle next to the watch name);
  4. Select "Break pair";
  5. If you are using a tariff plan, click "Delete tariff";
  6. Enter the password for your account;
  7. Reaffirm your desire to break the pair.

Unlinking also resets to factory settings.

Apple Watch Series 2, 3 notifications are not received

This may be due to the following:

  • The smartphone to which the smartwatch is connected is currently in use. Then notifications are displayed on it;
  • Your watch is active in screen lock or do not disturb mode. Unlock or disable this mode through the Control Center;
  • The watch is disconnected from the phone. This is announced in the Control Center with a special pictogram. Turn on Wi-Fi and Bluetooth on your phone, and on your watch, first activate Airplane Mode and then turn it off.

How to unlock Apple Watch 2, 3

To unlock the watch, touch its screen or briefly press any button, and then enter the previously set passcode.

How to change the band on Apple Watch 2, 3

How to untie Apple Watch from iPhone (unpair): 3 ways. How to pair with apple watch a second time

How to pair with Apple Watch. How to connect to iPhone or iPad

If you have already become the owner of a smartwatch from Apple, then you should connect your Apple Watch to your iPhone in order to use all the functions of the watch. This article will show you how to pair your Apple Watch. Also here you will learn how to connect your watch to an iPad, how to check if there is a connection between devices and what to do if Apple Watch cannot see the iPhone and the connection between them cannot be established.

How to pair with Apple Watch - pairing process

There are 2 ways to pair Apple Watch, iPhone - automatic and manual. The first way to connect gadgets is faster and easier, for it you will need:


If it is not possible to perform automatic pairing (the camera on the smartphone does not work, other problems), you can do everything manually. How to manually connect Apple Watch to iPhone:
  1. Place both devices next to each other.
  2. Turn on Wi-Fi, or mobile network on your iPhone.
  3. On the iPhone screen, tap the “Watch” app icon.
  4. Turn on the “start pairing” function.
  5. Then select the “manual installation” mode at the bottom of the screen.
  6. Touch the “i” symbol.
  7. The iPhone should now see your watch.
  8. Then just follow the instructions of the program.

What iPhones does Apple Watch work with?

It all depends on what watch model you have, but one thing is for sure - you cannot connect even the earliest smartwatch from Apple to an iPhone whose model is younger than 5s. Also, a prerequisite is the presence of a version of the iOS operating system.

Apple Watch Series 3 (GPS) and all earlier watches will work with iPhone 5s, or later phones with the latest version of iOS installed.

Apple Watch Series 3 (GPS + Cellular) will only work with iPhone 6, or a newer device (7, 8, X) with the latest version of iOS installed.

How to check the connection between Apple watch and iPhone?

There are two ways to check the availability of a connection - using a watch, or on the phone screen.

To check the connection on the watch display, you need to open the "Control Center" for this, swipe the picture of the main screen from top to bottom. If the crossed out iPhone icon or a red cross appears in the upper left corner of the watch, then the connection between the devices is not established. When using the "Watch" application on your iPhone to check the connection, you should go to the application and open the Watch tab, it will contain information about the connection.

How to connect to iPad?

The principle of connecting Apple Watch to an iPad tablet is no different from the method of connecting to an iPhone smartphone, which you can familiarize yourself with above in this article.

What to do if Apple Watch can't see iPhone?

The first thing to do in this unpleasant situation is to check for a connection, as described earlier in this article, if there is no connection, then the problem lies precisely in this.

The smartwatch manufacturer offers several ways to solve this problem to choose from.

Method One: Reconnect

Try connecting your Apple Watch to iPhone again. For everything to go well, make sure that the devices are close to each other, it is also worth making sure that the iPhone is connected to Wi-Fi and Bluetooth, and “Air Mode” was turned off on the contrary. To do this, open the lower curtain of the device by swiping the screen from the bottom up. Pay attention to the circular images of Wi-Fi and Bluetooth? They must be active, the aircraft image must be inactive.

Next, check the Apple Watch face. If you find an airplane icon, then Airplane Mode is on on your watch. In this case, go to the Control Center, to do this, swipe the dial from the bottom up and disable Air Mode by clicking on the airplane symbol.

Finally, restart your Apple Watch along with your iPhone.

If after that it is not possible to restore the connection, resort to the second method.

Method Two: Break and Re-create the Link Between Apple Watch and iPhone

  1. In the watch settings, open “Settings”, then select the “General” tab and press “Reset”, then “Erase content and settings”.
  2. In the Apple Watch app on your iPhone, you need to select My Watch and tap on the watch at the top of the display. There will be an “i” icon next to the watch symbol, click on it and select “Unpair Apple Watch” from the menu. Press twice to confirm the action.
  3. Now pair your Apple Watch and iPhone following the instructions above again.

Method three: Apple tech support

If none of the above methods works, it is recommended to contact Apple support on the manufacturer's official website, or in the “ReStore” stores, or, if this is not possible, to the service center. Do not attempt to troubleshoot connection problems due to damaged devices yourself.

myapples.ru

How to re-pair Apple Watch

How to connect Apple Watch to iPhone. Complete instructions.

Apple Watch - setup and first impression

mi band 2 does not connect, synchronization of the fitness bracelet with the phone

Xiaomi Mi Band 1S not connecting / not syncing SOLVED THE PROBLEM SIMPLE!

Why the phone does not see the Bluetooth headset

iFhone 8 Commercial Leaked!

GoPro Hero 4, 5 & 3: How to connect your GoPro camera to an iphone (iPhone) and update the firmware

NEW LIFE OF OLD TV: POSSIBILITIES OF MODERN MEDIA PLAYERS

How to connect Sony SmartWatch if they are not supported by your smartphone

GoPro Hero 4 - how to connect to your phone - # 31

Also see:

  • How to set a ringtone for iPhone
  • How to transfer photos from iPhone to laptop
  • Message iPhone what is it
  • How to reset password on iPhone app store
  • Installing mac os on a Macbook from disc
  • Download vfeed like on iPhone for Android
  • How to transfer a photo from a camera to an iPhone
  • How to confirm mail on iPhone
  • How to download the old version of Skype for iPhone
  • iPhone 4 is not included in dfu mode
  • How to clean an iPhone from scratches
  • How to set up a bank card in iPhone
  • How to return a photo to an iPhone after an update
  • How to adjust screen resolution on iPhone 6 Taiwan
  • The screen glows blue on an iPhone
Home »Choices» How to pair your Apple Watch again

iphones-4g.ru

How to get started with Apple Watch, pair, and sync with iPhone

If you have already bought an Apple Watch or are just going to do so, this guide will show you how to make the initial setup, pair and sync your Apple smartwatch with your iPhone.

Although the official sales of the Apple Watch started only on April 24, back in early March, Apple released the final version of iOS 8.2, in which a new Apple Watch app appeared that allows you to pair an Apple smartwatch with an iPhone. In addition, the Apple Watch app can be used to make some settings for your smartwatch and sync data between it and your smartphone.

Initial Apple Watch setup

1. To start using Apple Watch, you need to sync it with iPhone 5 or later with iOS 8.2 or later. 2. Go to Settings -\u003e Bluetooth on your iPhone and make sure Bluetooth is turned on. 3. Make sure your iPhone is connected to Wi-Fi or cellular. 4. Turn on your Apple Watch. To do this, press and hold the button on the side of the watch (next to the Digital Crown) until you see the Apple logo on its screen. 5. Choose and set a language for your Apple Watch. You can scroll through the list of languages \u200b\u200busing swipes on the screen or the Digital Crown. 6. After that, a window appears on the Apple Watch screen prompting you to launch the Apple Watch app on your iPhone. Make sure Apple Watch and iPhone are charged and close to each other.

How to automatically pair Apple Watch with iPhone

3. Align the yellow viewfinder on the iPhone display with the animation on the Apple Watch screen.

4. As soon as the iPhone displays a message that the pair has been created, click on the "Set up as new Apple Watch" button.

5. Depending on which hand you wear the watch on, choose one of the two suggested options.

6. Confirm that you agree to the terms and conditions.

7. Enter the username and password of your Apple ID account.

8. Click "OK" after reading the information about geolocation services.

9. Tap OK after reading the Siri information.

10. Click OK after reading the diagnostic information.

11. Set a 4-character password for your Apple Watch. For added security, you will be prompted to set a 7 character long password. Select the option you want. Note that the password must be entered on your Apple Watch, not on the iPhone.

12. Choose if you want the Apple Watch to be unlocked together with the iPhone.

13. Choose if you want all available apps to be automatically installed on your Apple Watch. You can also skip this step and install them later.

14. After that, you will see on the iPhone display that syncing with Apple Watch is complete.

15. That's all. You've set up your Apple Watch for the first time, paired it, and synced it to your iPhone.

How to manually pair Apple Watch with iPhone

If for some reason you do not want to automatically pair Apple Watch with iPhone using the camera, you can create it manually. In this case, simply provide the name of your Apple Watch to initiate the pairing process.

1. Launch the Apple Watch app on your iPhone.

2. Click the Start Pairing button on your iPhone and Apple Watch.

3. Tap Manual Pairing at the bottom of the Apple Watch screen, then tap the i button to display the name of your Apple Watch.

After your iPhone detects your Apple Watch, follow the steps above one by one, starting from step 4.

Apple Watch instructions

If you've already bought an Apple smartwatch or are planning to do so, our other instructions for using Apple Watch may be useful to you:

How to get started with Apple Watch, pair and sync it with iPhoneHow to find and install an app on Apple WatchHow to uninstall an app from Apple WatchHow to turn on, turn off, or completely restart Apple Watch

newapples.ru


Owners of smart watches sooner or later are puzzled by questions about pairing Apple technology with each other. In 90% of cases, this is a question about how to pair an iPhone with an Apple Watch. This is not surprising, since the company supplying such equipment to the market has its own characteristics, which speak of the individualization of the approach.

Do not be intimidated by pairing or syncing your iWatch smartwatch with your iPhone or iPad, because it does not take much time and consists of just a few steps.
Photo: How to pair Apple Watch to iPhone?

Step-by-step instructions on how to connect Apple Watch to iPhone?

If you connect each step of connecting or synchronizing a smartwatch to another device from Apple, you get step-by-step instructions that will help a newbie user solve this problem. So, to successfully connect iWatch to iPhone, you need:

  • turn on the watch by pressing the button on the side, it must be held for 1-2 seconds, in a word, until the Apple logo appears;
  • after the company icon is displayed, you will see a message on the accessory screen in which you must select a language (there are 4 of them). Stop at which one you know best;
  • followed by confirmation to create a pairing between Apple Watch and iPhone. It must be accepted;
  • following the instructions, install the smartwatch application on the iPhone, go to it, select "Pair", and it should appear

appleiwatch.name

How to untie Apple Watch from iPhone (unpair): 3 ways

If you have a desire to sell your Apple Watch (or pair with another iPhone), then you will certainly face the need to untie the device from the iPhone (break the pair). It is very simple to do this: you just need to perform a number of simple actions, and this can be done even in the absence of a smartphone.

In contact with

You may also need to unlink Apple Watch from iPhone if one of the gadgets malfunctions.

How to untie (unpair) Apple Watch from iPhone if both devices are in front of you - method 1

1. Place both gadgets next to each other;

2. Open the Apple Watch application on the smartphone;

3. In the window that opens, at the bottom, there will be a menu "My watch" - click on it;

4. After that, you should click on the item "Apple Watch", on the next screen, you must click on "i".

5. By clicking on the "Unpair Apple Watch" button, you must confirm the cancellation of device synchronization, after which all data about the watch will be deleted from the communicator.