iPhone 5 features a 4-inch Retina display with a resolution of 1136 x 640 pixels. The resolution of the new screen is the previous 326 ppi. In addition, Apple has improved the color reproduction of the screen by 44%. iPhone 5 is capable of GPRS, EDGE, EV-DO, HSPA, HSPA +, DC-HSDPA, and LTE networks. In HSPA + networks, the device supports speeds up to 21 Mbps, DC-HSDPA - up to 42 Mbps, LTE - up to 100 Mbps. One modem is used to support all communication technologies. The smartphone is able to automatically switch from one technology to another in real time. Supports two-channel data transmission over Wi-Fi 802.11 a / b / g / n with a maximum speed of 150 Mbps.
| Features: | |
|---|---|
| A type | smartphone |
| operating system | iOS |
| Version | 6 |
| CPU | Apple a6 |
| RAM | 1024 MB |
| Flash memory | 32768 MB |
| Screen | |
| Diagonal | 4.0 " |
| Resolution | 1136 x 640 |
| Color rendering | 16 million colors |
| Digital camera | |
| Camera | 8 million pixels |
| Food | |
| Time in operation | 8 h |
| Standby time | 225 h |
| Dimensions and weight | |
| Width | 58.5 mm |
| Height | 123.8 mm |
| Depth | 7.6 mm |
| Weight | 112 gr. |
Apple iPhone 5: Hello Piglet!
Each new iPhone is launching a megapixel race and computing muscle for the rest of the mobile market. After the next announcement, competitors can proudly declare certain advantages, sadly stating an unshakable fact: most of all, they buy the iPhone. Of course, if we talk about the premium segment and the segment of smartphones with an "average" price tag.It just so happened that everyone is the flagship. However, this does not mean at all that every model is flawless. Within the framework of this article, we will have to understand the features and technical characteristics of the 5S. The smartphone went on sale in 2013. It is an improved version of the "five". At first glance, there are not many differences, but the developers have done a lot of work, making changes not only in the external design, but also in the internal "stuffing". What will surprise this model of the "apple" brand? Users are interested in the main technical characteristics of the iPhone 5S. We are talking about a new processor, a version of the operating system, an improved camera, and of course, Touch ID, or in other words, a fingerprint scanner built into the Home key.
Hardware "filling"
This smartphone is the first where developers have implemented a 64-row system. The A7 chip operates on two computing modules. The maximum clock frequency reaches a limit of 1300 MHz. One gigabyte of RAM is a good addition. With such "stuffing" the smartphone is able to cope with any task. Resource-intensive applications open quickly and smoothly, there are no system crashes or freezes. In this parameter, the "apple" brand, as always, remained at its best. By the way, we note that some Chinese processors, based on four or more cores, are not able to provide such performance results. The main reason for this is platform optimization, and in this criterion, Apple remains out of competition, as it constantly improves the proprietary iOS operating system.
We cannot ignore the amount of built-in memory when describing the technical characteristics. iPhone 5S 16 Gb - "junior" version. Naturally, from the name it is already clear that the manufacturer has integrated 16GB storage for installing software and other files. The medium version already provides 32 GB. But for the demanding user, the developers have released a modification with 64 GB of internal memory. It is recommended to take the volume of ROM seriously, having considered all the nuances, since the manufacturer does not support working with flash cards, so it is not possible to further expand the storage.
iPhone 5S: screen specifications
The comfort of using a smartphone depends on many indicators. However, the main characteristics of the screen can be considered. In the model with the 5S index, it does not differ from its predecessor. Its diagonal has remained the same - 4 inches. The display may seem small at first glance, but the high resolution saves the situation. For example, the pixel density per inch is 326 ppi. Note that this is a fairly high figure. Display type - IPS LCD, Retina. The picture is reproduced on the screen of excellent quality. The detailing is high, the color is excellent (the tint is rich and bright), the brightness is sufficient even when working under the bright rays of the sun, there are no complaints about viewing angles. And, of course, when describing the technical characteristics of the iPhone 5S, it is necessary to indicate the screen resolution, which is 1136 × 640 px, which undoubtedly deserves respect.
Characteristics of cameras
Although the resolution of the main camera does not differ from its predecessor, the developers still conjured up over the characteristics. iPhone 5S received a matrix with an increased pixel size and a reduced aperture value. As for the latter, it is f / 2.2. Naturally, changing the parameters has significantly improved the quality of images, even in poor lighting conditions. In order for photographs taken at night to be detailed and clear, the developers installed a dual True Tone flash.
One thing can be said about the front camera - its resolution is only 1.2 megapixels. Selfies, of course, can be taken, but you shouldn't count on high quality.
Autonomy
An equally important point in the technical characteristics of the iPhone 5S is the battery life. The smartphone has a 1560 mAh battery. Chemical composition - lithium polymer. Construction type - non-removable. The rechargeable battery delivers decent results. For example, in standby mode, the device will last about 250 hours without recharging. If the interaction with the gadget is limited to the average load, then you can safely count on 24 hours of operation, after which you will need to connect the device to the mains through the charger.
Comparison of iPhone 5S and 6S
It is not very correct to compare the technical characteristics of these models, since they were released with a difference of two years. The developments in the mobile industry are constantly improving, so the 6S is much better equipped. For example, let's compare their diagonals - 4ʺ versus 4.7ʺ in favor of the latter. Accordingly, in the sixth modification, the resolution also increased (1334 × 750 px), but the density remained the same. The changes also affected the hardware.
The iPhone 5S A7 processor has been replaced with a higher performance A9. Increased by exactly half the RAM in the 6S. Also in the lineup there was a modification with an integrated storage of 128 GB, but the manufacturer refused from the 32 GB version. The developers have also increased the resolution of the cameras. The fifth generation was equipped with 8 and 1.2-megapixel matrices, and in the sixth there were 12 and 5 megapixels. And, of course, when comparing these two gadgets, you need to pay attention to the battery capacity. In the iPhone 6S, it was increased by 155 mAh, but this was practically not reflected in the operating time (test results are the same).
Information about the brand, model and alternative names of a specific device, if any.
Design
Information about the dimensions and weight of the device, presented in different units of measurement. Materials used, offered colors, certificates.
| Width Width information - refers to the horizontal side of the device in its standard orientation during use. | 58.6 mm (millimeters) 5.86 cm (centimeters) 0.19 ft (feet) 2.31 in (inches) |
| Height Height information - refers to the vertical side of the device in its standard orientation during use. | 123.8 mm (millimeters) 12.38 cm (centimeters) 0.41 ft (feet) 4.87 in (inches) |
| Thickness Information about the thickness of the device in different units. | 7.6 mm (millimeters) 0.76 cm (centimeters) 0.02 ft (feet) 0.3 in (inches) |
| Weight Information about the weight of the device in different units of measurement. | 112 g (grams) 0.25 lbs (pounds) 3.95 oz (ounces) |
| Volume The approximate volume of the device, calculated based on the dimensions provided by the manufacturer. Refers to devices with a rectangular parallelepiped shape. | 55.14 cm³ (cubic centimeters) 3.35 in³ (cubic inches) |
| Colors Information about the colors in which this unit is offered for sale. | Grey Silver Golden |
| Materials for making the body Materials used to make the device body. | Aluminium alloy Glass |
SIM card
The SIM card is used in mobile devices to store data that certifies the authenticity of mobile service subscribers.
Mobile networks
A mobile network is a radio system that allows multiple mobile devices to communicate with each other.
| GSM GSM (Global System for Mobile Communications) is designed to replace the analog mobile network (1G). For this reason, GSM is often referred to as a 2G mobile network. It is enhanced by the addition of GPRS (General Packet Radio Services) and later EDGE (Enhanced Data rates for GSM Evolution) technologies. | GSM 850 MHz GSM 900 MHz GSM 1800 MHz GSM 1900 MHz |
| CDMA CDMA (Code-Division Multiple Access) is a channel access method used in communications in mobile networks. Compared to other 2G and 2.5G standards like GSM and TDMA, it offers faster data transfer rates and the ability to connect more consumers at the same time. | CDMA 800 MHz CDMA 1700/2100 MHz CDMA 1900 MHz |
| CDMA2000 CDMA2000 is a group of 3G standards for mobile networks based on CDMA. Benefits include stronger signal strength, less network outages and interruptions, analog signal support, wide spectral coverage, and more. | 1xEV-DO Rev. A 1xEV-DO Rev. B |
| UMTS UMTS stands for Universal Mobile Telecommunications System. It is based on the GSM standard and refers to 3G mobile networks. Developed by 3GPP and its biggest advantage is to provide more speed and spectral efficiency thanks to W-CDMA technology. | UMTS 850 MHz UMTS 900 MHz UMTS 1700/2100 MHz UMTS 1900 MHz UMTS 2100 MHz |
| LTE LTE (Long Term Evolution) is defined as a fourth generation (4G) technology. It is developed by 3GPP based on GSM / EDGE and UMTS / HSPA with the aim of increasing the capacity and speed of wireless mobile networks. The subsequent development of technologies is called LTE Advanced. | LTE 700 MHz Class 13 LTE 700 MHz Class 17 LTE 800 MHz LTE 850 MHz LTE 900 MHz LTE 1700/2100 MHz LTE 1800 MHz LTE 1900 MHz LTE 2100 MHz |
Mobile technology and data rates
Communication between devices in mobile networks is carried out using technologies that provide different data rates.
Operating system
An operating system is the system software that controls and coordinates the operation of hardware components on a device.
SoC (System on a Chip)
A system on a chip (SoC) integrates all the major hardware components of a mobile device into a single chip.
| SoC (System on a Chip) A system on a chip (SoC) integrates various hardware components such as a processor, graphics processor, memory, peripherals, interfaces, etc., as well as the software required for their operation. | Apple A7 APL0698 |
| Technological process Information about the technological process by which the chip is manufactured. The value in nanometers is half the distance between the elements in the processor. | 28 nm (nanometers) |
| Processor (CPU) The main function of the processor (CPU) of a mobile device is to interpret and execute instructions contained in software applications. | Apple Cyclone ARMv8 |
| Processor size The capacity (bits) of the processor is determined by the size (in bits) of registers, address buses and data buses. 64-bit processors offer better performance than 32-bit processors, which are more efficient than 16-bit processors. | 64 bit |
| Instruction set architecture Instructions are commands with which the software sets / controls the processor. Information about the instruction set (ISA) that the processor can execute. | ARMv8-A |
| Level 1 cache (L1) The cache memory is used by the processor to reduce the time it takes to access more frequently used data and instructions. L1 (level 1) cache is small and is much faster than both system memory and other levels of cache. If the processor does not find the requested data in L1, it continues to look for it in the L2 cache. On some processors, this search is performed simultaneously in L1 and L2. | 64 KB + 64 KB (kilobytes) |
| L2 cache L2 (level 2) cache is slower than L1, but instead has a larger capacity, allowing more data to be cached. It, like L1, is much faster than system memory (RAM). If the processor does not find the requested data in L2, it continues to look for them in L3 cache memory (if available) or in RAM memory. | 1024 KB (kilobytes) 1 MB (megabytes) |
| Level 3 cache (L3) L3 (level 3) cache is slower than L2, but instead has a larger capacity, allowing more data to be cached. It, like L2, is much faster than system memory (RAM). | 4096 KB (kilobytes) 4 MB (megabytes) |
| The number of processor cores The processor core executes program instructions. There are processors with one, two or more cores. Having more cores increases performance by allowing multiple instructions to execute in parallel. | 2 |
| CPU clock speed The clock speed of a processor describes its speed in cycles per second. It is measured in megahertz (MHz) or gigahertz (GHz). | 1300 MHz (megahertz) |
| Graphics processing unit (GPU) A graphics processing unit (GPU) handles computation for a variety of 2D / 3D graphics applications. In mobile devices, it is most commonly used by games, consumer interfaces, video applications, and more. | PowerVR G6430 |
| Number of GPU cores Like a processor, a GPU is made up of several working parts called cores. They handle the graphical computing of various applications. | 4 |
| GPU clock speed Speed \u200b\u200bis the clock speed of the GPU and is measured in megahertz (MHz) or gigahertz (GHz). | 200 MHz (megahertz) |
| The amount of random access memory (RAM) Random access memory (RAM) is used by the operating system and all installed applications. The data that is saved in RAM is lost after the device is turned off or restarted. | 1 GB (gigabytes) |
| Memory type (RAM) Information about the type of random access memory (RAM) used by the device. | LPDDR3 |
| M7 motion coprocessor |
Built-in memory
Each mobile device has built-in (non-removable) fixed memory.
Screen
The screen of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.
| Type / technology One of the main characteristics of the screen is the technology by which it is made and on which the image quality of information directly depends. | IPS |
| Diagonal On mobile devices, screen size is expressed in terms of the length of its diagonal, measured in inches. | 4 in (inches) 101.6 mm (millimeters) 10.16 cm (centimeters) |
| Width Approximate screen width | 1.96 in (inches) 49.87 mm (millimeters) 4.99 cm (centimeters) |
| Height Approximate screen height | 3.48 in (inches) 88.52 mm (millimeters) 8.85 cm (centimeters) |
| Aspect ratio The aspect ratio of the long side of the screen to its short side | 1.775:1 |
| Resolution Screen resolution shows the number of pixels horizontally and vertically on the screen. Higher resolution means sharper image detail. | 640 x 1136 pixels |
| Pixel density Information about the number of pixels per centimeter or inch of the screen. Higher density allows information to be shown on the screen in clearer detail. | 326 ppi (pixels per inch) 128 ppcm (pixels per centimeter) |
| Color depth Screen color depth reflects the total number of bits used for color components in one pixel. Information about the maximum number of colors the screen can display. | 24 bit 16777216 flowers |
| Screen area The approximate percentage of the display area on the front of the device. | 61.05% (percent) |
| Other characteristics Information about other functions and features of the screen. | Capacitive Multitouch Scratch resistant |
| Corning Gorilla Glass Retina display 800: 1 contrast ratio 500 cd / m² Oleophobic (lipophobic) coating LED-backlit |
Sensors
Different sensors perform different quantitative measurements and convert physical metrics into signals that the mobile device can recognize.
Rear camera
The main camera of a mobile device is usually located on its rear panel and can be combined with one or more additional cameras.
| Sensor model Information about the make and model of the sensor used by the camera. | Sony Exmor RS |
| Sensor type | |
| Sensor size Information about the dimensions of the photo sensor used in the device. Typically, cameras with a larger sensor and lower pixel density offer higher image quality despite lower resolution. | 4.89 x 3.67 mm (millimeters) 0.24 in (inches) |
| Pixel size Pixels are usually measured in microns. Larger pixels are capable of capturing more light and therefore provide better low-light performance and wider dynamic range than smaller pixels. On the other hand, smaller pixels allow for higher resolution while maintaining the same sensor size. | 1.498 μm (micrometers) 0.001498 mm (millimeters) |
| Crop factor The crop factor is the ratio between the size of a full-frame sensor (36 x 24 mm, equivalent to a frame of standard 35 mm film) and the size of the device's photo sensor. The number shown is the ratio of the diagonals of a full-frame sensor (43.3 mm) to that of a specific device's photo sensor. | 7.08 |
| ISO (light sensitivity) The ISO value / speed indicates the sensor's sensitivity to light. Digital camera sensors operate within a specific ISO range. The higher the ISO speed, the higher the sensor's sensitivity to light. | 32 - 2500 |
| Light-strength | f / 2.2 |
| Focal length The focal length indicates the distance in millimeters from the sensor to the optical center of the lens. Equivalent focal length (35mm) is the focal length of a mobile device camera, equated to the focal length of a 35mm full-frame sensor, which will achieve the same angle of view. It is calculated by multiplying the real focal length of the mobile device camera by the crop factor of its sensor. The crop factor can be defined as the ratio between the diagonals of a 35mm full-size sensor and a mobile device sensor. | 4.3 mm (millimeters) 30.43 mm (millimeters) * (35 mm / full frame) |
| Number of optical elements (lenses) Information about the number of optical elements (lenses) of the camera. | 5 |
| Flash type The rear (rear) cameras of mobile devices mainly use LED flashes. They can be configured with one, two or more light sources and vary in shape. | Dual LED |
| Image Resolution | 3264 x 2448 pixels 7.99 MP (megapixels) |
| Video resolution | 1920 x 1080 pixels 2.07 MP (megapixels) |
| 30 frames / sec (frames per second) | |
| Specifications | Autofocus Burst shooting Digital zoom Digital image stabilization Geographic tags Panoramic shooting HDR shooting Touch focus Face recognition Exposure compensation Self-timer |
| IR filter Sapphire crystal glass lens cover 720p @ 120 fps |
Front-camera
Smartphones have one or more front-facing cameras of various designs - pop-up camera, PTZ camera, notch or hole in the display, camera under the display.
| Sensor type Information about the type of camera sensor. Some of the most widely used types of sensors in mobile cameras are CMOS, BSI, ISOCELL, and others. | CMOS (complementary metal-oxide semiconductor) |
| Light-strength Aperture (also known as aperture, aperture, or f-number) is a measure of the size of the lens aperture, which determines the amount of light entering the sensor. The lower the f-number, the larger the aperture and the more light reaches the sensor. Usually, the f-number is indicated, which corresponds to the maximum possible aperture of the aperture. | f / 2.4 |
| Image Resolution Resolution is one of the main characteristics of cameras. It represents the number of horizontal and vertical pixels in the image. For convenience, smartphone manufacturers often quote resolutions in megapixels, indicating the approximate number of pixels in millions. | 1280 x 960 pixels 1.23 MP (megapixels) |
| Video resolution Information about the maximum video resolution that the camera can record. | 1280 x 720 pixels 0.92 MP (megapixels) |
| Video recording rate (frame rate) Information about the maximum recording rate (frames per second, fps) supported by the camera at maximum resolution. Some of the most basic video recording speeds are 24 fps, 25 fps, 30 fps, 60 fps. | 30 frames / sec (frames per second) |
| Specifications Information about additional software and hardware features of the rear (rear) camera. | Face unlock |
| HDR Exposure compensation |
Audio
Information about the type of speakers and audio technology supported by the device.
Radio
The radio of the mobile device is a built-in FM receiver.
Locating
Information about the navigation and positioning technologies supported by the device.
Wi-Fi
Wi-Fi is a technology that enables wireless communication for transferring data over short distances between various devices.
Bluetooth
Bluetooth is a standard for secure wireless transfer of data between various types of devices over short distances.
USB
USB (Universal Serial Bus) is an industry standard that allows different electronic devices to exchange data.
Headphone jack
This is an audio connector, which is also called an audio connector. The most widely used standard in mobile devices is the 3.5mm headphone jack.
Connecting devices
Information about other important connection technologies supported by the device.
Browser
A web browser is a software application for accessing and viewing information on the Internet.
Video file formats / codecs
Mobile devices support different video file formats and codecs, which respectively store and encode / decode digital video data.
Battery
Mobile device batteries differ in their capacity and technology. They provide the electrical charge required for their function.
| Capacity The capacity of a battery indicates the maximum charge it can store, measured in milliampere-hours. | 1560 mAh (milliampere-hours) |
| A type The type of battery is determined by its structure and, more precisely, by the chemicals used. There are different types of batteries, with the most common mobile devices using lithium-ion and lithium-ion polymer batteries. | Li-polymer |
| Talk time 2G 2G talk time is the period of time during which the battery is completely discharged during continuous 2G talk. | 10 h (hours) 600 min (minutes) 0.4 days |
| Standby time 2G Standby time in 2G is the period of time during which the battery charge is completely discharged when the device is in stand-by mode and connected to a 2G network. | 250 h (hours) 15000 min (minutes) 10.4 days |
| Talk time 3G Talk time in 3G is the period of time during which the battery charge is completely discharged during a continuous conversation on a 3G network. | 10 h (hours) 600 min (minutes) 0.4 days |
| 3G standby time Standby time in 3G is the period of time during which the battery is fully discharged when the device is in stand-by mode and connected to a 3G network. | 250 h (hours) 15000 min (minutes) 10.4 days |
| Specifications Information about some additional characteristics of the device battery. | Non-removable |
Specific Absorption Rate (SAR)
SAR level refers to the amount of electromagnetic radiation absorbed by the human body when using a mobile device.
| Head SAR (EU) The SAR level indicates the maximum amount of electromagnetic radiation that a person's body is exposed to when holding a mobile device near the ear in a talking position. In Europe, the maximum SAR value for mobile devices is limited to 2 W / kg per 10 grams of human tissue. This standard was established by the CENELEC committee in accordance with the IEC standards, following the ICNIRP guidelines of 1998. | 0.93 W / kg (Watts per kilogram) |
| Body SAR (EU) The SAR level indicates the maximum amount of electromagnetic radiation to which the human body is exposed if the mobile device is held at hip level. The highest SAR value for mobile devices in Europe is 2 W / kg per 10 grams of human tissue. This standard was established by the CENELEC committee in accordance with the ICNIRP guidelines of 1998 and IEC standards. | 0.99 W / kg (Watts per kilogram) |
| Head SAR (US) The SAR level indicates the maximum amount of electromagnetic radiation that a person's body is exposed to when holding a mobile device near the ear. The maximum value used in the USA is 1.6 W / kg per gram of human tissue. US mobile devices are controlled by CTIA and the FCC conducts tests and sets their SAR values. | 1.18 W / kg (Watts per kilogram) |
| Body SAR (US) The SAR level indicates the maximum amount of electromagnetic radiation to which the human body is exposed if the mobile device is held at hip level. The highest SAR value in the United States is 1.6 W / kg per gram of human tissue. This value is set by the FCC and CTIA monitors mobile devices for compliance with this standard. | 1.18 W / kg (Watts per kilogram) |
The Apple Special Event gave us some food for thought. Not to say that the company presented us with something unexpected at its annual presentation, but there is something to think about.
Recall that on September 10, 2013, Apple introduced us to a new generation of smartphones, namely the iPhone 5S and iPhone 5C. In connection with this event, a natural question arises for all owners of devices of the previous generation, for example, iPhone 5 or 4s.
Differences and characteristics of the iPhone 5S, 5C and 4S.
The most significant differences between the latest generation iPhones, 5S and 5C, are:
- New processor, with increased performance A7 (5C has an A6 processor, like the 4th generation iPad). In addition to the main processor, the iPhone 5 S also uses a second, M7 coprocessor, which is responsible for calculations of movements, movement functions and animation (in the 5C it is not).
- The camera now has a new, more realistic flash that promises to make your photos more vivid and vivid. The characteristics of sensitivity and luminosity have been improved, towards more modern, professional indicators. (On the iPhone 5C, the camera hasn't changed from the iPhone 5 model.)
- An interesting new feature, now the iPhone can scan your fingerprint. The fingerprint scanner is built into the round Home button of the device. This feature is designed to protect your device from unauthorized use and to make it easier to unlock your smartphone.
These are the main differences between the new models and their predecessors.
iOs 7 what's new?
Don't forget about the many new features, capabilities and redesigned design in iOs 7, which will be installed by default in the latest generation models. You can also update to iOs 7 on your smartphones. The release date for iOs 7 is September 18, 2013. From that day on, you can download and install the update. List of supported iOs 7 devices: iPhone 4, iPhone 4S, iPhone 5, iPad 3, iPad 4, iPad mini, and iPod touch (5th generation).
I would also like to mention the new AirDrop feature, which will be available in iOs 7. Many users of Apple smartphones often resented and wondered. With the release of the new mobile OS now, officially. Previously, it was only available as a tweak in Cydia for jailbreak users. In addition, the "" function has become available out of the box to find a lost or stolen phone. You can download the application from the App Store.
How to transfer, transfer videos, photos, contacts from one iPhone to another? So, with the release of iOs 7, such an opportunity will appear. It will be possible to transfer your contacts, photos, videos and some other files using a Wi-Fi connection and the iCloud service. However, the feature will only be available on iPhone 5, iPad (4th generation), iPad mini and iPod touch (5th generation).
To buy or not to buy an iPhone 5c?
Comparison of the characteristics of the new model and its predecessors allows us to conclude: it makes sense to buy an iPhone of the latest generation only for owners of 4S, because the changes between these models are really significant. Apple iPhone 5 users can wait until the next generation with a purchase. in terms of design and functions of the device, the differences are minimal.
Also, all the new features of the iOs 7 mobile operating system installed on the iPhone 5s and 5c are supported by the 5 smartphone model. And by the way, whoever wanted to buy an iPhone 5 or iPhone 4, I advise you to hurry up. Very soon they will not be available for sale. Apple is stopping their production. Only the iPhone 5S, 5C and 4S models will remain on the market.
Well, that the day has finally come when lovers of apple products (as well as competitors) have waited for a new smartphone from Apple. 12.09.2012 in San Francisco was officially presented new iphone 5 ... This model has a completely new display, as well as a body that is much thinner than the previous iPhone and other equally useful and interesting functions. But let's talk about everything in order.
Apple iPhone 5 review
1. The first thing that catches your eye in the iphone5 is of course the screen. A retina display with a diagonal of 4 inches and a resolution of 1136 × 640 pixels is installed here, with a high pixel density as a result of which the human eye will be unable to see more than one pixel. This, in turn, will make images and game applications as realistic as possible.
2. Apple engineers had to work hard on a new slim 7.6mm body that would remain as comfortable and compact as previous models of smartphones, while still having such technical characteristics. The size of the case is 12.3 cm high, 5.8 cm wide, and only 0.76 cm thick, that is, less than a centimeter. The back panel is made of aluminum, which in turn has a positive effect on the weight of the phone - 112 grams.
3. The presence of the new A6 chip, has increased performance and speed several times. Due to this, photos, videos, pages on the Internet and applications will launch as quickly as possible. But despite its good performance, this did not in any way affect the battery life. The phone will work up to 480 minutes in internet and talk mode, up to 600 minutes in video mode and exactly 40 hours without recharging in music mode.
Iphone 5 specifications
4. As for the external design, the connector has changed, which is much smaller and better. But what should people do with old connectors? A special adapter adapter called Lightning to 30-pin will be sold for them. 
The headphone jacks have not changed, which cannot be said about the headphones themselves. New headphone model EarPods that comes with the iphone5 has got not only a new design, but also a good sound quality. At the time of their creation, more than 500 people of different ages participated in their testing. Testers wore them in the rain, ran with them in hot and cold weather, as a result, they are not only well protected from the effects of water and sweat, but also comfortable - which is important. The dynamics of the iphone 5 also changed, they became 20 percent smaller, but despite this, the sound quality improved.
5. The presence of a camera in today's phones will not surprise anyone, almost every model has it. But this cannot be said about the iPhone 5. The camera in this smartphone has 8 megapixels and shoots 40 percent faster than before - and this despite the fact that the body has become thinner.
The quality of the photos taken with it is so clear and realistic that it will be hard to believe that they were taken with a mobile phone. Plus, a new function has appeared here - panoramic shooting, with a high resolution with a viewing angle of 240 degrees. And the presence of a front camera with 1.2 megapixels will make it easy to communicate on Skype.
